Dropped my phone down the toilet and everything works fine still apart from the WIFI is not there.

I recently dropped my White Iphone 4s down a toilet on a night out!!!
I quickly picked it up and took it home and dryed in off and placed it in a bowl of rice and a few days later everything was fine and working just like normal apart from some water under the screen.
Also the Wi-Fi option on my iphone just isn't displayed and greyed out.
I have also recently updated the software on the phone to the new 5.1.1 which i have seen there has been problems with about the wi-fi dropping and not being displayed.
I would just like some advice if anyone else has had this problem and if which i think it probably is, the hardware has become loose inside the phone and its not the software.

The WiFi radio is dead. You cooked it. Make an appointment at the genius bar and take your credit card. If you did not purchase AppleCare+ with the phone, a replacement will cost you US$199.

Similar Messages

  • I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

    I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
    Thanks,
    Eyal

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • Greetings: I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked.  I upgraded to Snow Leopard and everything works fine - except Bluetooth. The Bluetooth icon isn't there. Any ideas?

    Greetings:
    I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked for the wireless Apple keyboard and mouse.  I upgraded to Snow Leopard and everything works fine - everything except Bluetooth.
    The Bluetooth icon does not exist in the System Preferenc screen.
    I tried to download Bluetooth from Apple site but the message I got told me that I didn't need it. 
    Under Finder, Utilities, I found Bluetooth File Exchange but the message I got was that I had to connect a Bluetooth device to my computer.
    I have to admit that I have no idea what's going on here.  I am hoping to avert the need to try another complete re-install of Snow Leopard.
    Any ideas?
    Thanks
    javaminit

    Puzzled is a polite word for it.
    Thanks Barry - I found the file and trie to send it to trash.  The response: (This item cannot be trashed as it it owned by the system).
    After dancing around with PRAM and SMC and turning on while holding the power-cntrl-option-shift and heavens knows what else, I now have the Bluetooth symbol on the top of the menu bar but it is ghoseted and has a squiggly line through it.   This, I didn't have before so I read this as some progress.  It notes that "Bluetooth is not available">
    However, the Bluetooth icon is still missing from the System Preferences window - you know, between "network" and "sharing".
    You note that you reckon the issue is not software based and you may be correct.  The reason that I wonder about that though, is that before I installed Snow Leopard, the keyboard and mouse both paired with the box under the Tiger 10.4.  That leads me to conclude that hardware is functional and that there is some screwy little bit of software that is not cooperating.
    If I could delete Bluetooth from the system and re-install a fresh version, that might help.  Or, is there a way I can use the Snow Leopard install disc and only load in Bluetooth?
    I'm stumped.
    Thanks for your time
    /Bill C.

  • I dropped my iPhone in water for about 30 seconds. The sounds and everything works fine, and I'm getting all text and email notifications however the screen is black. Also, I can see water that is stuck in the camera. I have the phone in a bag of rice

    Dropped my phone in water. Sound and vibrations are working but screen won't turn on. I can see a little water in the camera. I currently have the phone in a bag of rice. HELP! :)

    Leave it in the rice for 6 or 7 days changing rice even couple of days.
    If after that it still doesn't work take it to Apple and purchase an out of warranty rteplacement for it.

  • I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?

    I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?

    Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price.

  • Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine, but I have another machine with just "Reader" installed - is there als

    Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?

    The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
    These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
    So, yes, you need to buy Acrobat. Standard is cheaper than Pro.

  • HT4009 Purchasing gems on the clash of clans game.  It tells me to contact customer support   This happens a lot  and support takes the block off my account  and everything works fine. Looking forward to y'all resolving my issue   Ryan Hinger

    Purchasing gems on the clash of clans game.  It tells me to contact customer support   This happens a lot  and support takes the block off my account  and everything works fine. Looking forward to y'all resolving my issue   Ryan Hinger

    If you are getting a message to contact iTunes support then only they can help you (these are user-to-user forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have downloaded IOS7 on my 4s and everything worked fine. Now I downloaded IOS 7.0.2 and my notes, reminders, and contacts are gone. How do I get them back?

    I have downloaded IOS7 on my 4s and everything worked fine. Now I downloaded IOS 7.0.2 and my notes, reminders, and contacts are gone. How do I get them back? I have backed up my phone, but not after I did the IOS7 update. Any help would be great. Thanks.

    Hi kamcop68,
    If you have a recent backup available (even pre-iOS7), you may want to try restoring your data from there. You may find the following article helpful:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Regards,
    - Brenden

  • I changed my apple id and everything works fine except message and face time. I cannot reactivate imessage and facetime shows my email to send and receive instead of my mobile number.

    I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?

    I apologize. I misread your statement.
    The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting Messages - Support - Apple

  • My iPhone got wet in the rain. Everything works fine. But The flash stays on even when no battery. Any help?

    My iPhone got wet in the rain. Everything works fine. But The flash stays on even when no battery. Any help?

    A liquid damaged iPhone 4 can be replaced by Apple for $149.
    By the way... and electrical short can be dangerous, creating a fire or explosion hazard. You can see the short that's affecting the flash... It's the short you may not see that's affecting the battery and/or charging circuitry that's the problem.
    Get it replaced.

  • HT1211 hd show i have downloaded them in the past and they work fine but now i cant buy any new ones it grayed out and wont let me click on them

    hd show i have downloaded them in the past and they work fine but now i cant buy any new ones it grayed out and wont let me click on them

    If you Go to the app store on your phone, then go to updates you should have a purchased icon at the top.
    Click on that and it will show the apps you have downloaded before as they are stored on the icloud.
    Then you should be able to click on the app and redownload it, not sure if it will charge but its worth a try.

  • My safari,4.1.3 on the bottom says cancelled opening page. have cleared the cache,and reset but it still does it on some pages,not all. Any ideas

    My safari,4.1.3 on the bottom says cancelled opening page. have cleared the cache,and reset but it still does it on some pages,not all. Any ideas

    It's possible that the pages you are attempting to open simply won't work with that old web browser.
    If you're using Mac OS X Tiger, update to the latest version, which is 10.4.11. (You might be using that already. Your profile says you're running 10.4.1, but I bet that's just a typo.)
    Then get the latest version of Safari that will run on Tiger. (And... you have that already: 4.1.3.)
    You might try a more modern browser designed specifically for your current OS. That would be TenFourFox.
    Information on TenFourFox:
    http://en.wikipedia.org/wiki/TenFourFox
    Download TenFourFox here:
    http://www.floodgap.com/software/tenfourfox/

  • TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

    I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

    Each device needs a separate address. Use an email address (gmail.com) on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy

    I Created a power view in Excel 2013 and uploaded to my Power BI for o365 site.
    But when i click on my excel file it opens in browser,After that i click on File tab its showing me two option 
    1. Save a Copy
    2.Download a copy
    When i click on save a copy its showing me an warning below
    Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy.
    Continue with Save?
    If i continue saving it only saves an excel files with data only not the power view which i want to save with applied filters.
    Please help me for this

    Just to clarify, when you hit the option of Save As Copy, the whole experience goes into a "read-write" mode in Excel services, which currently doesn't support authoring, just consumption of PowerView sheets.
    Two mitigations that come to mind:
    1. Download the copy (as Brad suggests), rename the file and upload.
    2. Use the send to option of SharePoint online, give the file the right target document library (can be the same as source) and rename the file:
    GALROY

  • Does anyone know why the delete and hide options are still missing in the crop tool option bar, despite having changed the background layer to a regular layer?  Thanks!

    Does anyone know why the delete and hide options are still missing in the crop tool option bar, despite having changed the background layer to a regular layer?  Thanks!

    "flying blind."
    "You totally lost me there, and I have no clue as to what your last question means."
    "I think I now know what you mean."
    Evidently language is of difficulty for you. 
    Perhaps the Oxford dictionary can provide you with your much needed “sensible, meaningful” content.
    According to the Oxford dictionary, a dialogue is to "Take part in a conversation or discussion to resolve a problem."  It also states that a dialogue is "A discussion between two or more people or groups, especially one directed toward exploration of a particular subject or resolution of a problem.”
    That IS the inherent nature of posts. A conversation is reciprocation.  Questions, followed by more questions.
    It is not difficult to understand.
    "how to ask your questions correctly for quicker and better answers" is best actualized by simply asking.
    Is it a Mac; is it not, etc.
    That IS sufficient.  That IS "quicker and better answers[ing]."  That IS what a dialogue IS.   And that IS actually what is "sensible," "meaningful," and "detailed." 
    The Oxford dictionary can best delineate and elucidate your lack of comprehension in what ACTUALLY “meaning” is.
    As well as what is "sensible" AND "detailed." 
    By the way, am I being repetitive.
    Still confused.  Let the experts that do not require much explanation respond with "quicker and better answers" for both "sensible, complete" responses." They are not "lost," "blind," or provide "incomplete" drivel.

Maybe you are looking for

  • WARRANTY null and void? Seriously??

    Hi all, new to this so please forgive me if I have posted in the wrong forum. I dropped my phone and cracked the screen - is it true that I now have no warranty at all because of this?? Seriously I now have a phone for a further 21 months of my contr

  • Where do i get soap.jar file to download from ?

    I am writing a SOAP client class in java and am looking for a place where I can download soap.jar file. Can somebody inform where it is. Thanks

  • Says that my serial number is not valid. Adobe Pro XI

    says that my serial number is not valid. Adobe Pro XI

  • Autmatic Outgoing Bank Interface

    HI All, I got new project and assigned a task to develop functional specs for Automatic Outgoing Bank Interface. Can any body tells me how to to mapping for fields and how to send the file to the bank and in which format? It would be great help from

  • Loading Jar classes dynamically - 10 Duke points

    How can I load a jar class dynamically if it relies on say other interface? Example is, if I have three classes read from the jar file, Test.class, Test1.class and Testable.class and "class Test implements Testable..." If I load the Test.class, how d