DS1.3 : SDK UI5 Table Control with Column Grouping
Hello,
Have anybody successfully implemented the "grouped" property of "sap.ui.table.Column" in Design Studio 1.3? This property seems to fail the complete page load.
We are on Design Studio 1.3 SP01.
Thanks
Arun
Hello,
I think you need to attach the output of your table to the input of the form that contains your button, so that this form "is aware" that you have changed the selected line.
Then you assign an action to the mapping and to the column so that when you click on a line of the table it "calls" the form.
You can give it a try, but I'm not sure of this.
Fabien.
Similar Messages
-
Table Control with default values for a Column
Hi,
I have a table Control with fields kschl kbetr konwa mark
i have created a range for KSCHL
now i need to pass this to the table column
Kindly suggest how can i handle this?
BEGIN OF y_condition,
kschl TYPE kscha,
kbetr TYPE kbetr_kond,
konwa TYPE konwa,
mark TYPE char1,
END OF y_condition,
t_cost TYPE STANDARD TABLE OF y_condition,
MODULE mo_tc_cost_init OUTPUT.
IF w_tc_cost_c IS INITIAL.
REFRESH CONTROL c_tc_cost FROM SCREEN c_scr2000.
REFRESH t_cost.
MOVE c_select TO w_tc_cost_c.
FREE r_kschl.
MOVE: c_i TO r_kschl-sign,
c_eq TO r_kschl-option,
c_zhb1 TO r_kschl-low.
APPEND r_kschl.
MOVE: c_i TO r_kschl-sign,
c_eq TO r_kschl-option,
c_zhb2 TO r_kschl-low.
APPEND r_kschl.
MOVE: c_i TO r_kschl-sign,
c_eq TO r_kschl-option,
c_zhb3 TO r_kschl-low.
APPEND r_kschl.
ENDIF.Can you clarify please?... you say have a table control containing the following columns:
kschl TYPE kscha,
kbetr TYPE kbetr_kond,
konwa TYPE konwa,
mark TYPE char1
so where do you expect the range table "r_kschl" to appear? ... did you want a second table control on the screen?
Jonathan -
I am creating new table. My goal is to display some text in few lines like this:
"AAAAAAAA" "BBBBBBBB" "CCCCCCCCC"
"DDDDDDD" "EEEEEEEE"
Actually the next row (with "DD" and "EE" values) is not displayed below first row, but on the next page.
I've tried to put table into rectangle, disabled all page breaks and still the same effect. Any help?Hi Heidi,
Actually, it's not solution, I only gave more details about my problem :)
Another description:
In my report I'm creating Tablix with Column grouping. There is only one column with image (every image has same width). If there is only three pictures, then they are displayed next to each other in one row.
In case, there is more than three pics, another row is showing on next page. I'd like to display all rows one after another on one page.
I've tried to create three vertical lists, and filter each column group to display only records:
1) =(RowNumber("Tablix1")) mod 3 = 1
2) =(RowNumber("Tablix1")) mod 3 = 2
3) =(RowNumber("Tablix1")) mod 3 = 0
Unfortunately, I got an error:
"A FilterExpression for the tablix ‘Tablix1’ uses the function RowNumber. RowNumber cannot be used in filters."
Do You have any other propositions?
--------EDIT--------
ok, I manged to solve it. As I said, I've created three vertival lists and placed them next to each other.
Then, instead of using filter, I've used Visibility trigger:
1)
=IIf(RunningValue(Fields![rowgroupfield].Value, COUNTDISTINCT, "Tablix1") mod 3 = 1, false, true)
2)
=IIf(RunningValue(Fields![rowgroupfield].Value, COUNTDISTINCT, "Tablix2") mod 3 = 2, false, true)
3)
=IIf(RunningValue(Fields![rowgroupfield].Value, COUNTDISTINCT, "Tablix3") mod 3 = 0, false, true)
I had to use function RunningValue to count all occurrences, as my report is quite complex and "RowNumber" [ssrs function] and "ROW_NUMBER() OVER (ORDER BY [rowgroupfield])" [sql query] were not working properly. -
How to Populate a Dropdown field for a table control with different keys
Hi All,
I have Table control with abt eight columns (fields). Out of these eight field one field is with dropdown list. In table control Project ID is Primary key column. Depending upon this Project ID value, i have different values which is to be populated in dropdown boxes. In table control if there is only one project ID value say 'P000715' i can populate it but when i have more than one project ID (P000715, p000716, P000717.....) in display in rows of table control i want to have different values in my dropdown field corresponding to that row of project id. Experts please tell me how to achieve this functionality.
Thankx in Advance
Rizwan Ahmad SiddiquiThe only way you may be able to do this is using
MODULE PROCESS ON VALUE-REQUEST. User-programmer F4 help
in your PAI routine.
In this routine you would build the list and get the returned value to update the field.
Something like this.
DATA: BEGIN OF value_tab OCCURS 0,
field1 TYPE zlmltype,
field2 TYPE zltypex,
END OF value_tab.
* Drop down values
REFRESH it_return_tab. CLEAR it_return_tab.
REFRESH value_tab. CLEAR value_tab.
SELECT ltype ltypex
INTO TABLE value_tab
FROM zlmltyp
WHERE auth NE '9'. "System Only
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD1'
value_org = 'S'
TABLES
value_tab = value_tab[]
return_tab = it_return_tab.
READ TABLE it_return_tab INDEX 1 INTO wa_return_tab.
CHECK sy-subrc EQ 0.
p_pleadtyp = wa_return_tab-fieldval. -
Table control - validate column
Dear VC Experts,
we are using VC with a RFC Data Service. On the output port we create a table control with following columns for example:
- Amount /MENGE (mandatory field)
- Checkbox type /BOOL1 (mandatory field) - true,false
- Expression Box / STATUS2 (validate amount and Checkbox) --> true, false
For the expression box we use the formula:
BOOL(@BOOL1==true AND @MENGE==0 OR @BOOL1==false AND @MENGE<>0)==true
This seems to work. Result: true, false
Further we have a button, which has to be disabled if the Expression Box has the status "false".
I dont know how to check all the values in the expression box. The button only gets disabled, if i select a specific row with the status 'false'. I would like to check all the valus in my table control, not only the selected one.
On the properties tab for my button i use the formula:
CONTAINS(#ID[ACC153]@STATUS2,'false')==true
Maybe any suggestions to check all the values in my table column? How can i check all the values in my column 'STATUS2' which contains true or false?
Moderator message - Please do not offer points or rewards
Edited by: Rob Burbank on Aug 3, 2010 11:32 AMHello,
I think you need to attach the output of your table to the input of the form that contains your button, so that this form "is aware" that you have changed the selected line.
Then you assign an action to the mapping and to the column so that when you click on a line of the table it "calls" the form.
You can give it a try, but I'm not sure of this.
Fabien. -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
BDC: How to enter data in Table control (With wizard) using scrolling?
Using BDC, I am trying to enter the data in the table control (with wizard).
I want to know what is the specific command to scroll down in table control (With Wizard).
While recording I am getting these steps:
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
When I use above command and run BDC, it does not scroll.
Kindly let me know where am I going wrong.
Thanks in advance for your kind help.
AshishThe transaction is CK94
and the BDC recording is :
T CK94
SAPLCKBASCR1 0200 X
BDC_CURSOR CKI94A-BDATJ
BDC_OKCODE =ENTR
CKI94A-MATNR 10000789
CKI94A-WERKS VA79
CKI94A-BDATJ 2005
CKI94A-MGTYP ZDU01
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(02)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(01)
CKI94B-MIXCOST_PC(02) X
CKI94B-MISCH_VERH(01)
CKI94B-MISCH_VERH(02) 40
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(07)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(07)
CKI94B-MISCH_VERH(07) 60
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE =STOR
BDC_OKCODE '/00' is recorded when I scroll down in the table control.
Thanks for your kind concern.
Ashish -
Vertical scroll bar in table control with wizrads
Hi,
Im working on a table control with a customised table. I created a table control with wizards. But vertical scroll bar is not working. How can i invoke vertical scroll bar and can any one provide the code for the all the operations on a table control like save,find,find next,change....Thanks in advance.
AvinashHi Avinash
move the records number of your internal table into field LINES of tablecontrol. So you should change the code generated by wizard in PBO, for example create a new module:
PROCESS PBO
MODULE SET_DATA_TO_T_CTRL.
LOOP..
ENDLOOP.
MODULE SET_DATA_TO_T_CTRL.
DESCRIBE TABLE ITAB LINE SY-TABIX.
<TABLECONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max -
UI5 Table control Cellclick event exception
Hi,
I have rendered "Table" control with the data. After populating the data when I clicked on Table Cell getting the below error in the Chrome browser console. (In the code I haven't hook CellClick event to the table control)
Uncaught Error: Syntax error, unrecognized expression: unsupported pseudo: tabbable sap-ui-core.js:27
i4.errorsap-ui-core.js:27
i4.selectors.filter.PSEUDOsap-ui-core.js:27
y4sap-ui-core.js:27
i4.compilesap-ui-core.js:27
B4sap-ui-core.js:27
i4sap-ui-core.js:27
$.findjquery-mobile-custom.js:15
$.find.matchesSelectorjquery-mobile-custom.js:15
Q.extend.filtersap-ui-core.js:27
A1sap-ui-core.js:27
Q.fn.extend.filtersap-ui-core.js:27
sap.ui.table.Table._enterActionModeTable.js:107
sap.ui.table.Table.onmouseupTable.js:70
a._callEventHandlessap-ui-core.js:134
a._handleEventsap-ui-core.js:134
U._handleEventsap-ui-core.js:134
psap-ui-core.js:16
Q.event.dispatchsap-ui-core.js:27
v3.handle
When I tried to add the attachCellClick event to the table control getting the following error, and data also not populating.
Uncaught TypeError: Object [object Object] has no method 'attachCellClick' First.view.js:66
sap.ui.jsview.createContentFirst.view.js:66
(anonymous function)JSView.js:6
d.runWithPreprocessorssap-ui-core.js:134
sap.ui.core.mvc.JSView.onControllerConnectedJSView.js:6
sap.ui.core.mvc.View._initCompositeSupportView.js:6
E.extend.constructorsap-ui-core.js:134
M.extend.constructorsap-ui-core.js:134
E.extend.constructorsap-ui-core.js:134
fsap-ui-core.js:122
fsap-ui-core.js:122
osap-ui-core.js:116
sap.ui.viewView.js:6
o.(anonymous function)sap-ui-core.js:116
(anonymous function)
Can someone advice on this.
Thanks,
RakeshHi,
There's no cellClick event in Table, because of which you are getting the error.
Regards,
Kiran -
How to handle Table controls with XD01 in BDC
How to handle Table controls with XD01 in BDC - If there are more than 5/6 records in Table control. - Can any one explain it with a piece of code plz..
Thanks & Regards,
Krishna ChaitanyaHi
check this code...viz for xko1....
DATA: BEGIN OF it_xk01 OCCURS 0,
f1(1),
f2(5),
f3(5),
f4(9),
f5(9),
END OF it_xk01.
DATA: v_count(2) VALUE '00',
v_koinh(14),
v_banks(14),
v_bankn(14),
v_bankl(14),
it_bdcdata TYPE STANDARD TABLE OF bdcdata WITH HEADER LINE,
wa_ctuparams type ctu_params.
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_f4.
START-OF-SELECTION.
PERFORM upload_data.
END-OF-SELECTION.
LOOP AT it_xk01.
IF it_xk01-f1 = 'H'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-KTOKK'
it_xk01-f2.
ENDIF.
IF it_xk01-f1 = 'N'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-PSTLZ'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
'Mr'.
PERFORM bdc_field USING 'LFA1-NAME1'
it_xk01-f2.
PERFORM bdc_field USING 'LFA1-SORTL'
it_xk01-f3.
PERFORM bdc_field USING 'LFA1-PSTLZ'
it_xk01-f4.
PERFORM bdc_field USING 'LFA1-LAND1'
it_xk01-f5.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
ENDIF.
IF it_xk01-f1 = 'I'.
v_count = v_count + 1.
IF v_count le 5.
CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
CONDENSE v_koinh NO-GAPS.
CONDENSE v_banks NO-GAPS.
CONDENSE v_bankl NO-GAPS.
CONDENSE v_bankn NO-GAPS.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_koinh.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING v_banks
it_xk01-f2.
PERFORM bdc_field USING v_bankl
it_xk01-f3.
PERFORM bdc_field USING v_bankn
it_xk01-f4.
PERFORM bdc_field USING v_koinh
it_xk01-f5.
else.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_koinh.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
v_count = 1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_koinh.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.
CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.
CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.
CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.
CONDENSE v_koinh NO-GAPS.
CONDENSE v_banks NO-GAPS.
CONDENSE v_bankl NO-GAPS.
CONDENSE v_bankn NO-GAPS.
PERFORM bdc_field USING v_banks
it_xk01-f2.
PERFORM bdc_field USING v_bankl
it_xk01-f3.
PERFORM bdc_field USING v_bankn
it_xk01-f4.
PERFORM bdc_field USING v_koinh
it_xk01-f5.
ENDIF.
ENDIF.
CLEAR it_xk01.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_koinh.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
wa_ctuparams-DISMODE = 'A'.
wa_ctuparams-UPDMODE = 'S'.
wa_ctuparams-DEFSIZE = 'X'.
CALL TRANSACTION 'XK01' USING it_bdcdata MODE 'A'
UPDATE 'S'.
options from wa_ctuparams.
MODE 'A'
UPDATE 'S'.
*& Form upload_data
text
FORM upload_data .
DATA: lv_infile TYPE string.
lv_infile = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lv_infile
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_xk01.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload_data
*& Form get_f4
text
FORM get_f4 .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
ENDFORM. " get_f4
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL <> NODATA.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*H 0302
*N sdng dddsj 500020 IN
*I IN ICICI 734897597 xyz
*I IN SBH 768346687 abc
*I IN SBI 345687346 fgh
*I IN SBH 763846878 ujhgf
*I IN HSBC 797893778 fvdg
*I IN HDFC 723678638 fdgf
*I IN 4444 435645646 fgfg
*I IN 3400 763468768 gfgfg -
Table control layout column positions are different with dislay positions
Hello All,
I added one column to standard table control at the 13th position,but at the display of that table control its showing at
96th position.please suggest me how to set that to 13th position at dislay.
Thanks in advanceHi,
You can do this using a single table control.
There is a option in the screen parameters to hide the column of the table control.
So based on the list value, you loop at screen containing the table control, and set the option to make the column invisible.. Try this.
Hope it helps..
Regards,
Sekar -
Table Control + last column
Hello Friends,
i am facing a strange problem. I have created a table control using table control wizard. when I enter the values in table control select the entry and press okey button everything works fine. then I gave the program to user for test, and he came back with following issue:
He entred the data in the table control, and then he press the enter button. then he went to the last column and change the value, press again enter button, the value overwrite again ( which he has entered before ).
I went in debug mode to see what is going on, and surpringly while entring the value in the last column I press enter the control did not went to my module "Z_TAB_CTRL_modify input." rather it went in user_command. module.... and that's why it did not updated the value after user change in last column....
Any idea what I can do to fix this issue...
Regards,Hi,
CHAIN.
ENDCHAIN.
Effect
The statements CHAIN and ENDCHAIN of the dynpro flow logic define processing chains. Between CHAIN and ENDCHAIN, the statements FIELD and MODULE can be executed. The statements between CHAIN and ENDCHAIN form a processing chain. Processing chains cannot be nested. The CHAIN statement can be specified in the event blocks at PAI and PBO , however, in the event block at PBO it has no effect.
<b>A processing chain allows the joint processing of all the screen fields stated between CHAIN and ENDCHAIN after FIELD statements:</b>
The contents of all screen fields combined to a processing chain by the FIELD statements can be checked in the shared conditions ON CHAIN-INPUT and ON CHAIN-REQUEST of the MODULE statement. -
Problem with column groups on Interactive Report
Hi
I am hoping that someone can help with this problem.
I am attempting to control both the grouping and ordering within each group of fields in the single row view of an interactive report. Creating column groups appears to be OK at first (sequence, name and description) but if I then attempt to edit the group, the sequence box appears to be empty even though it was filled with a unique number at the time of creating the group.
In addition, any changes to the order of the fields within the group made using the shuttle box at the bottom of the screen don't seem to be saved even to the Apply Changes button is pressed.
Anybody know what is happening here and can anyone suggest how to control both the order of the groups and ordering within each group?
Thanks in anticipation
MartinMoun wrote:
I am dealing with many interactive projects in my application. Sometimes I have to add a column to the interactive report. When I do so, the column doesn't appear in the interactive report...On the page I have to click on "Actions" then go to "Selected columns" and then display it ! the problem is when I logout and login again
the column desappear again and I have to do samething again and again...Is there a way to set it appear by defaul always ???After adding new columns to an existing IR, you need to select them for display as a developer, and save the new report as the Primary Default. -
How can I directly update a SAP screen table control with values?
I have a need to update a table control on a standard SAP screen with values. Here's the scenario: The user will come into a standard SAP transaction (IQS2-change notification) and click on an action button which calls a function module. That function module will determine what needs to be added to the SAP screen table control (add additional task rows). When the function module returns with the row data to be added to table control, I would like to set those values as if the user input directly. The table control is located on it's separate tab (TASKS) in the transaction. I cannot find any user exists or BADI's for this transaction to allow me to affect the TASKS tab table control for this GUI. I'm trying to prevent from having to make a custom modification. If anyone has any ideas, please let me know. Thanks.
Hi,
Check these enhancements:
IWOC0002 PM/SM notification: Check whether status change is allowed
QQMA0001 QM/PM/SM: User Subscreen for Notification Header
QQMA0008 QM/PM/SM: User Subscreen for Additional Data on Notif. Ite
QQMA0011 QM/PM/SM: User Subscreen for Additional Data on Task
QQMA0013 QM: Default Values when Creating a Task
QQMA0014 QM/PM/SM: Checks before saving a notification
QQMA0015 QM/PM/SM: User-Exit before Call-Up of F4 Help on Catalogs
QQMA0016 QM/PM/SM: "User data" Function "Goto" --> "Task" Menu
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Regards
Appana -
Creation of a Table control with the wizard
Hi all,
I'd like to add a table control to my dynpro with the wizard.
I want to use an internal table and a work area from my program but I get the following error :
"The table work area WA_FID does not exist or is not a structure".
here is my data definition:
types: begin of fid_line,
dokar type draw-dokar,
doknr type draw-doknr,
doktl type draw-doktl,
dokvr type draw-dokvr,
dktxt type drat-dktxt,
dokst type draw-dokst,
end of fid_line.
data : it_fid type table of fid_line,
wa_fid type fid_line.
I also tried using field symbol as work area.
I thought it was possible to create a table control from a user internal table.
Did someone see the problem ?
Thanks
Sylvain V.Hi,
Check the below link.
In this, I am not using wizard,but manually creating table control and I am not using user defined types.I don't think it is possible to use user-defined internal table in wizard.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/table control in abap.pdf
Maybe you are looking for
-
How to read the value of OLAPDataGrid cell/s from external object
Hi, I have an OLAPDataGrid control in an Adobe flex application, and I am using the cutom renderer to render the cells of the OLAPDataGrid , any Idea how I can read the value of each cell at the renderer , so I will be able to decide about the action
-
Import of docs into new pages and iCloud-pages header / footer get lost
Hi, after updating to pages 5.0 I cannot use my old documents: these are not importes / opened witheir respective headers / footers. The same happens when importing "old" docs into icloud-pages. Alexander
-
Hello All, I need help in designing star schema based on 2 facts. We have Something like this Dim1 [1-n] Fact1 Dim2 [1-n] Fact1 Dim3[1-n] Fact2 Fact1[1-n] Fact2 If i create one single Logical table with 3 sources (F1 and 2 dimensions D1 and D2) and j
-
How do I find nook id for a book
how do I find nook id for a book
-
I am looking for a way to share run-time configuration information between Forté and Java processes, possibly running on different boxes (Solaris). Someone suggested we use an URL-based retrieval mechanism, or perhaps LDAP. Does anyone have any point