DSL Won't stay connected with Airport

Here's an odd one.
Been running my MacBook Pro 10.5.6 with a Xyzel Modem on Earthlink for over a year. Recently my DSL connection has been running SLOOOOOOW and then began to break off after 15 minutes or so.
The connection works fine and stable when I connect my DSL line directly to my computer... it just has this problem when it's connected through the Airport.
I can reconnect for another 15 minutes if I powercycle the modem.
Of course Earthlink says it's an Apple problem. Anyone have any ideas?!
I'm in major frustration mode.

I have the exact problem, and this is really getting annoying...i've tried like 3 million things and nothing works because once itunes checks for updates the ipod disconnects!!!! no solutions for this??????????

Similar Messages

  • Windows vista won't stay connected to airport extreme.

    I have two computers connected to my airport extreme.  My mac stays connected without any problems, the pc laptop keeps disconnecting.  This problem only happens with the pc/airport extreme connection.  The pc will stay connected when a netgear router is being used.  Any suggestions (besides replacing the pc with a macbook, which I would love to do)?

    Tesserax, the pc is in the same room with the airport router.  I haven't tried connecting to it with the ethernet cable.  I'll give that a try.
    Dumb question...I can access the airport utility on the mac, but not on the pc (cuz I couldn't find it there).  Is there a way to find it on the pc?  Thanks for providing a path for me.  Here are those settings:
    Wireless Mode = Create a wireless network
    Radio Mode = Automatic
    Radio Channel Selection = Automatic
    Wireless Security = WPA2 Personal
    AirPort > Wireless tab > Wireless Network Options
    Use wide channels = checked or unchecked? Checked
    Create a closed network = checked or unchecked? Unchecked
    Use interference robustness = checked or unchecked? Don't see this on this page
    Internet > Internet Connection tab
    Connect Using = ? Ethernet
    Connection Sharing = ? Share a public IP address
    Internet > TCP/IP tab
    Configure IPv4 = ? Using DHCP

  • My Airport won't stay connected to the internet

    I was previously using ethernet to connect.  I have had the airport for a few months and can connect to the internet okay from my laptop.  I now wish to use my airport to connect.  I set it up without a problem and it does connect.  Problem is that I lose the connection after a minute or so.  I run through diagnostics which tells me my connection is okay.  It is at that point but I again lose connection after a minute or so.  Back to diagnostics and the circle of events continues.  I have re-started the computer to no avail.  Help anyone?

    I should say that my computer won't stay connected to the internet.  I have reset the airport.  The airport extreme works and connects fine with my laptop, ipad and iphone.

  • Itunes will not stay connected to Airport Express with any Yosemite update.

    Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
    I have no probblem at all when using ipad or other devices.
    Matt

    Hello mtvessell,
    If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support. 
    Can't connect to the iTunes Store
    http://support.apple.com/en-us/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/en-us/TS3297
    Regards,
    -Norm G.  

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • AirPort WiFi on 2010 MBA won't stay connected to 5Ghz band since latest 10.6.7 update.

    I updated my 2010 MBA 11" to the latest/greatest of everything in prep for Lion. So, I now have 10.6.7 of course. But ever since the updates, I noticed that my wifi on the MBA won't stay connected to the 5 Ghz band of my router. It'll connect fine to the 2.4 Ghz channel, so its not a big deal, but this is my first weird issue with the Mac (I converted in January), so of course it bugs me.
    Anybody else having the same issue? Since Lion is around the corner, I can get by using the 2.4 band and hope its not an issue in Lion. But part of me wants to try to use my TIme Machine backup right before I updated to see if it is truly related to the updates.
    Thanks!
    John

    Forgot to mention, I have a Netgear WNDR3400 N600 Dual Band Wireless Router. But like I mentioned, it has worked perfectly for 5 months previously.

  • I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!

    I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!

    No one from Apple here - this is a user-to-user forum for the Apple Thunderbolt Display. If you don't like your iPad, sell it.
    If you want to ask questions about your iPad, go to the iPad community forum.
    Clinton

  • I have Dreamweaver CS5 with Windows 8 and it won't stay connected to the server and it says I need flash plug in, please help

    I have a Gateway computer with Windows 8 installed.  I have installed Dreamweaver CS5 to manage my website and it won't stay connected to the server.  It also won't play flash and says I need a flash plug in.  Please help

    #1  Try toggling Passive FTP on/off in your remote server's site definition.
    #2 Except for a handful of gaming sites, Flash is a dead web technology.  It's not supported by iPhone, iPad, iTouch, Android, etc...  I don't recommend using Flash for anything these days.  Better to use HTML5, CSS level 3 and JavaScript.
    Nancy O.

  • My iMac won't stay connected to the internet, even though all other computers in my house stay connected

    My iMac won't stay connected to the internet, even though all other computers in my house stay connected, and its connection is set up the same way my fiance's macbook is (his macbook is about three years older than my iMac). Every time my computer goes into sleep mode and I come back (even if it's mere seconds after giving the black screen) I have no internet connection. I discovered a workaround for it some time ago, but now that is working less and less, and now my computer randomly disconnects WHILE I'm actively using the internet. Just a few minutes ago, the connection refused to come back until I restarted my computer, even though once again all other computers in the house were connected. The workaround I discovered before and which doesn't work as reliably now, is to click opne Airport at the top right of the screen, click "Open Network Preferences," then click "Assist me," then click "Diagnostics," and wait for everything to turn green again, signalling a connection.

    Let's check the quality of your connection since signal strength alone does not insure a good connection. The "bars" that you see at the top of the iMac screen are there pretty much for show.
    Hold down the option key on the iMac while you click on the Apple icon at the upper left corner of your screen and select System Profiler
    Look down the list of items at the left of the window until you find the setting for Network, then click on AirPort.
    In the window to the right, look for any listings of your wireless network name. You may possibly see two listings for the wireless network name.
    We need for you to list the information that you see for Signal / Noise.  These will be negative numbers. Post back with your findings and we will continue.
    In the meantime, please move any cordless phones that you have or any other electronic devices that are near the iMac as far away as possible from the iMac.
    If the iMac is located in a corner or an enclosed area, give it as much room as possible since the wireless antenna is on the back of the iMac and it needs to be able to "see" the room.
    Anything that you can do to minimize the number of obstructions like walls or furniture etc between the iMac and the wireless router will help the cause as well.

  • Won't stay connected to network

    Not sure if this is a Safari problem or internal with my Mac somehow. I have a G5 and I connect to a router for wireless internet. I also connect to my printer through the same router.
    I've noticed sometimes when I exit safari and then come back to the computer later and click the Safari Icon it sometimes doesn't connect to the internet without me having to go through a "Network Diagnostic" test. Then usually what happens is about half way through the diagnostics my internet home page will load, or I'll get to the end of the diagnostic and it says "your connection is working" and then the home page will appear.
    The problem I have now is that my computer won't stay connected to my printer. If I try to print a document or photo it does not send it to the printer, however if I turn Safari on so I know I'm connected to the network then all of a sudden the printer will work.
    I guess somehow my computer is automatically disconnecting from my network and I'm not sure why or how to fix it. I've gone into the network preferences an it always shows "airport" is on and I always show all "solid" in the little icon at the top that looks like a "fan".
    Any thoughts here on why my comp doesn't seem to stay connected to the network?
    Thank you.

    HI,
    Try updating your system software to 10.5.8 with the combo update available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    After the installation, repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • IPhone 3gs WI-Fi won't stay connected after 6.1 update

    I have a 3gs and the wi-fi connections have been working fine on iOS 5.1 etc. until I just updated to 6.1.  Now it sees the networks that I normally connect to, but it won't connect unless I physically move closer to the source of the wi-fi signal in my office, ie. the Airport Extreme Router with the software update that just came out last week. I had this problem before and after I updated the router software.  No problem previously.  Its like the phone can't hold onto the wireless connection and either can't connect or won't stay connected.  I've hard re-booted, and reset network settings, etc.  No luck.  What's the problem and the solution?  Thanks.

    valerie101 wrote:
    Would like to know from Apple how long until this is fixed.
    We're not Apple here, and you would have known that had you read the Terms of Use of this forum.  Apple does not, and will not respon to posts here.
    We are users here, just like you.  We are volunteering our time to help others with technical support problems they may have.
    If you would like technical support, please state your problem clearly, succinctly, without ranting and raving, and I'm sure there are many of us that would be more than happy to help you.

  • Apple Time Capsule Won't Stay Connected

    After Verizon upgraded my router to the 9100EM my Apple Time Capsule Connects to the router but won't stay connected all the time. I have to go into router management console a couple of times a day and reboot it the restore connection. Time Capsule is connected to router by lan cable into port 1 of router. Time capsule set in bridge mode I believe. Just from time to time when I run Air Port Utility Time Capsule has green light but internet goes orange once i reboot I'm good for several hours then loses connection and have to reboot again. Tried looking for other settings to adjust but haven't found anything to help. If any body has any suggestions please help, it just gets old having to reset all the time

    If you are using a Mac, which OS is installed?  
    Use Software Update to make sure you have all the latest updates.
    Repair permissions.
    Change your router (Airport) channel.  Most times this all you have to do!

  • Won't stay connected since upgrade

    Hey gang,
    Got a brand new iTouch last weekend and upgraded the SW to v3.1.2(7D11). Ever since then, it won't stay connected to my wireless at home once it's turned off. Turn it back on and enter in the passphrase and all is good. At work it seems to be fine. Not sure what to look for.
    Thanks in advance
    Toy4rick

    Well, it looks like it's being caused by SSID not being broadcast. As long as I have it broadcasting, all is well, as soon as I disable this, it won't connect after a restart.
    This is my second iTouch, the first one had a bunch of dust appear under the glass and the Apple store replaced it no qualms, couldn't be happier My first iTouch didn't act this way and was running the previous version of software. It wasn't until i got a new unit and updated to this version that the issue started.
    I have 2 other iTouch's in the home with the older software and they don't have any issues with SSID not being broadcasted.
    Any additional thoughts?
    Toy4Rick

  • Imac won't stay connected to wireless network

    I recently moved and now my imac won't stay connected to my wireless network. Every other device connects just fine, so it's not the service, or the location, because devices are all in the same room.
    Every time my computer goes to sleep it seems to completely forget how to connect to the internet. There is only one Network (mine) listed in preferred networks. The computer will connect only if I go to System Preferences and run through the Network Diagnostics to tell it exactly what to connect to. Each time it says my connection and internet are fine, which I know.
    Please someone tell me how to get it to remember my network so I can stop going through the Diagnostics every time I want to use my internet.

    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.
    If that doesn't work try changing channels on your Router.

  • Preferred wifi network won't stay connected

    Hi,
    I have a 2010 macbook and since updating to Yosemite 10.10.2 the connection to my wifi won't stay connected - tends to last only 3/4 minutes before I have to manually reselect the network. It immediately reconnects without me having to retype the wifi password and the network is the only one in my preferred networks. There were no problems previously and the signal is consistent when other people connect laptops and iPads and I have my iPhone connected to it.
    I have had a look at the standard apple troubleshooting guide for network issues but it's pretty useless as it seems to assume that the problem is with the router or with the network provider.
    Any advice would be greatly appreciated,
    cheers
    Ollie

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.

Maybe you are looking for