DSO Analysis Report : Show wrong period

I have created the new Variant for DSO Selection Programme RFDRRE05 to get the DSO for Credit Representative Group for closed period (i.e. now Period one is going, it should consider period value as 12). For this we created and assigned a Variable to be updated from TVARV table.
Surprisingly, when I look a the Variable assigned to the Variant for DSO Selection Programme RFDRRE05, I can see the period value as 12 but when I see the selection Log in DSO Report (T Code F.30) it shows period value as 10.
The report is picking up the variant from INDX table as mentioned below,
IMPORT GENR_LDBPG
       GENR_RRSEL
       GENR_RREXX
       SOPT_RRSEL
       SOPT_RRSEL_DYN
       SOPT_RREXX
FROM DATABASE RFRR(RR) ID RRCATKY.
IF SY-SUBRC NE 0.
MESSAGE A517.
ENDIF.
Please let me know which program is updating this INDX table.
I would highly appriciate your quick response.
Best regards,
Sanjeev Jain

Dear Ajay,
I've checked the configuration by following details;
1. Period control setting in AFAMP : 002
    - Period control: Acquisition : 01 (Pro rata at period start date)
    - Period control: Acquisition in the following year : 01 (Pro rata at period start date)
    - Period control: Retirement : 02 (Pro rata upto mid-period at period start date)
    - Period control : Transfer : 02 (Pro rata upto mid-period at period start date)
2. Period control setting in OAVH
   - FV: K4, Period Control : 01 -> Month : 0, Day 0
   - FV: K4, Period Control : 02 -> Month : 1, Day 15
3. Changeover method : 05 (Changeover after end of the useful life)
The problem occurred for some asset that acquisition on last year.
Could you please help me to investigate and solve this problem?
Thank you for your suggestion.
VirgoGirl
Edited by: virgogirl on Mar 7, 2011 4:39 AM

Similar Messages

"Invoice History Report "show wrong balance for supplier invoice with USD

Invoice History Report show wrong balance for supplier invoice with USD Currency
After I run this report i see in the last of this report there is difference between the supplier total
USD (Currency ) and the open Balance USD , it is decreased the open balance
for supplier with 2300 USD with out any reasons
bellow is some data copy of the report
======================================================
Supplier Site Total: SAR 34,700.00
Supplier Site Total: USD 39,000.00
Supplier Total: SAR 34,700.00
Supplier Total: USD 39,000.00
Open Balance: SAR 34,700.00
Open Balance: USD 36,700.00
*** End of Report ***
==============================================
please advise me from where can this differenc ( 39000 - 36,700=2300 )COMMING
or it is bug in this report , becuase i compare this report with other report in account payable like
-supplier open balance letter
-invoice register report
-invoice aging report
all this report give me the amount for supplier USD =39000
BUT AGIN FROM WHERE THE SYSTEM DECREASED THE AMOUNT TO 36,700
thanks

Can you try running Create Accounting For payments just before you run the Invoice History Report and re-check .
Thanks

Sales analysis report- showing & totaling both Invoices & Credit memos on o

I have written a Several sales analysis reports based on INV1 tables and RIN1 tables, (Invoice lines and Credit memo lines) for SAP B1 using crystal. I would like the data from both the invoices & the credit memo to list & total on the same report. But have had no luck doing this.
Is it possible?
How would I go about doing it?

Solved my problem, I used the "Show SQL Query" window on my existing reports copied and pasted them to SQL Management Studio as a View, used keyword Union All to join the two queries (Invoices and Credit memos) and used the view as the data link to create a new report in Crystal Report writer.
This got me both of the data files into the report detail line and allow for summing.
Problem solved.
Thanks for the input.

Report showing wrong data

Hi Gurus,
When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
Thanks,
Rafi

Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
if all are good then try to add other column from any other dim and then do the same as above
repeat till you know the cause.
Pls mark if helps

Snapshot report showing wrong instance on grid control!!!

Hi
On one of the cluster environments, Even though I run snapshot report on instance 2, report shows instance 1. This i happening on one set of cluster environment. Other cluster instances are working fine.
Let me know if you have seen such behavior and fix...
Thanks,

It does not matter how many instances you have running in a RAC cluster ... you have one and only one database.
Define your use of the term "snapshot." We have no idea to what you are referring.

F.19 report showing wrong values (GR/IR)

Hello,
At my company, they run the MR11 to check for GR/IR variances and then clear these variances using the F.13 transaction. However, when the F.19 transaction is run to analyze the GR/IR clearing account, there are some old PO's belonging to year 2005/2006 that still show up in the report. When these PO's are checked, there is no GR/IR variance.
Could someone please explain the reason for this and if there is any way to remove these entries from the F.19 report?
Thanks in advance,
Rugmani.

Hi,
This is the wrong forum for this
Rgds,
Richard

Report Painter report showing wrong values

Hi,
We have a report painter report Y_DN3_47000280 which is Inventory by Plant. We have a plant which is sold out and is not working anymore under the company. But the report is still showing postings and values in tune of 183000...Can you please advise what is wrong and what setting is missing?
Thanks,
Prithwi.

Hi Dianne,
Thanks for the details. We checked MBEW table. There's a mismatch of the values between MBEW and Y_DN3_47000280 report. MBEW contains $109.6 and the Y_DN3_47000280 report contains $180333.00 for the plant.
Can you pls tell from where these values are populating. The plant has been closed 3 months back.
Thanks,
Prithwi.

Discoverer report showing wrong output

Hi all
We have made a discoverer report called Generic Employee list which is having 37202 records. But in the front end it is showing only 7001 records.
I have checked that query in toad there i am getting 37202 records and i checked in discoverer desktop there it shows 37202 but when iam exporting it to Excel or CSV file it has only 10054 records.
Its urgent. Kindly advise on the same.
Thanks & Regards
Nakshathra

Hi Nakshathra,
Go to Tools --> Options --> Query Governer, uncheck the Limit Retrived data Query, some times it will set to default 10000 records else manually you can set the limitation.
I hope this helps you.
Cheers,
Naga Suresh. C

Why OWB Execution status report showing wrong status ?

Hi,
I created a process flow. It executed successfuly.
In that process flow I used 4 mappings. and the data is updated in 4 tables. In all the tables data updated successfully.
But the execution status is showing that , in one table the records inserted are 0.
I verified in the Runtime Assistant. There it shows correctly.
Why it is showing like that?
Any suggestions are welcome.
Thanks and regards
Gowtham Sen.

I've seen this often here. Check the log files on the OWB server and you may see that control center service was force restarted. I have an SR opened with Oracle on this.
The symptoms I've seen are:
1. The mapping reports success
2. Some or all of the levels of the mapping show "*" for the statistics
3. The mapping completion time shows the mapping start time.

HFM 11.1.1.3 ICP Report showing wrong value for Entity Currency Total

Here is the situation.
There are transactions on a ICP account (Entity Currency) 3.305.080
A journal is posted to the same account with the same POV. 307.205
When I run my ICP report on Entity currency i get the correct figure. 3.305.080
When I rum my ICP report on Entity Currency Total I get a wrong figure 307.205 (Equalt Entity Currency Adjustment) where it should have been 3.612.285
Any clues anybody?

There is no limit. In reality there has not been a limit to the volume of data in a single subcube since paging was added in the 4.0 release. Certainly since 64 bit HFM was introduced there really is no limit to the amount of data in a subcube, or the database for that matter.
Now that I've said that, 850,000 records in a single subcube is a lot of data. Prior to 4.0, the development team added an warning message when a subcube exceeded 100,000 records, but this was purely informational. You should still heed the notice. Most applications have a largest-cube size somewhere between 35,000 and 100,000 records (the top entity usually). While I've seen as many as a million records, you may experience performance problems at that point. Make sure you give the database and HFM app servers a lot of memory to handle this.
Since HFM 11.1.2.2 with its configurable dimensions, data can be spread across many more intersections. In your example you have seven custom dimensions, so I can understand how you might have a normal amount of data in each base entity (a few hundred to maybe a couple thousand), but balloon to hundreds of thousands when you get to the top entity. HFM can process a lot of data very quickly, but be careful if you have rules that cycle through all those intersections, such as allocations or maybe cash flow by product.
But there is no hard limit in HFM.

EWA Report show wrong details

Hi All,
As per EWA report we have upgraed our oracle version 11.2.0.2 to the latest oracle SBP and has done all the steps as given in the readme document which is from market place.
After that we have generated the EWA report but still for the database performance point it gives below recommendation.
But still, in the EWA report we are getting below recommendation.
13.4 Oracle Release
Release Recommendation
11.2.0 We recommend that you install the latest Oracle patch set as
soon as possible (refer to SAP Note 415900). Check SAP Note 1431799
regularly for the latest patch set for Oracle 11.2.0.
Note that in addition to the patch set, further bug fixes may be
available and recommended. Refer to the following SAP Notes:
Patch set SAP Note number Description
11.2.0.2 1503709 Oracle 11.2.0: Patches / Patch collections for
11.2.0.2
Our concern is why after applying the latest SBP on oracle 11.2.0.2 still we are receving the same message.
It this only for information?
Can somebody help to understand.
Regards
Deepak

Hello,
If you are back on ST-SER 701_2010_1 SP05, you need to ensure that the Service Content is up todate.
Check in AGS_UPDATE. If there are any updates to be downloaded or Activated, please do so.
BEfore you replace the sevice defintions, check if there have bene any issues witht he refresh defintion task...you can see this int he maintenace package SDCCN task on the managed system. If it is not encountering errors and is running, then the system should have good curent defintions. But if there have been problems with the tasks at all it may be worthwhile.
Regards,
Paul

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

Report painter report with diff. periods for different company codes

I need to create a report showing different period data for diff. company codes.
If company code = 1000, start date = 1, end date is user selected
If company code = 2000, start date = 6, end date is user selected.
Can this be done?
Thanks experts.

Hello
Can you please explain a little more in details. I know how to create a formula variable but am not sure how to frame the if statement. The company code is coming from the selection screen when the user runs the report. How do I put an If statement to say "If company code is XXXX, then start period is "06"?
Thanks for your help,

Wrong Qty Showing in Sales Analysis Report

Dear All
When we run Sales Analysis Report Item Wise by selecting Delivery Note in the selection, then it shows '0' or '-1' in Quantity field. It should show totat quantity delivered of each item.
Can anyone elaborate this why it happens?
Thanks and Best Regards
Nabeel

Dear Rahul
I haven't unblocked negative inventory check. But that will not create any affect in Sales Analysis Report.
Regards
Nabeel

S_ALR_87012167: DSO-Analysis with wrong drill down to AR line items (FBL5)

Hi Gurus,
we are testing DSO-analysis in TAC S_ALR_87012167 and unfortunately we receive by using the drilldown wrong balance for AR line items (FBL5).
Report RFDRRSEL was setup to select open items by 31.01.2012 and provide us various DSO-groupings (e.g. by KNA1-BRAN1). When we drill down to AR-line items SAP (by FBL5) provides wrong balance (e.g. open by 16.02.2012). Therefore balance used for DSO-calculation does not tie to the one in DSO-drilldown to AR-line items.
Is there any solution in order to set parameters for drilldown to receive AR open items which fit to selection of RFDRRSEL???
Thanks for your reply.
BR, Bernd

Hi AA
refer this link where in I have given the screen shots
http://img233.imageshack.us/g/86081486.jpg/
The 1st screen shot is COPY of the Std Form
The 2nd scren shot shows how to add new interval
Br, Ajay M

DSO Analysis Report : Show wrong period

Similar Messages

Maybe you are looking for