Dublicate the database with one year data

Hi DBA's
I need to create the duplicate database instance. But only one year data from the source instance to target instance, source instance is having 3 years data.
is it possible to do so? and which method i have to follow to create a Duplicate instance?
One year data is having in size nearly 1 TB .
Regards,
SG

Please see this thread for similar discussion -- ebs cloning version 11.5.10.2
Thanks,
Hussein

Similar Messages

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to iCloud pops- up constantly. My iCloud account is registered with an old email and password. I do not remember the

I have an IPad mini and I changed the Apple ID and the password almost one year ago and, for a while, a message asking me to sign in to ICloud pops- up constantly. My ICloud account is registered with an old email address and password. I do not remember the password to my ICloud account, and ID address that my ICloud account is registered under is an old email adress which is deleted right now (the old mail account is deleted). I don’t have a rescue email adress and I don’t know the answers to the security questions, so I have no way of changing the ICloud password. A message asking me to sign in to ICloud pops up constantly, but I always just hit cancel. However, now I am unable to access Find My IPad. How do I get my ICloud account changed and registered to be under my current Apple ID (email) and password? It is possible to set the device as New Ipad?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I want to move the move my photoshop elements photo database from an old pc to a new pc without losing the modified dates and tags created, what is the best way to transfer the database with all the information about the photos

an old pc to a new one. How to I transfer the database file to save dates that have been modified and tags that have been created

See:
Use Backup, Restore to move catalog | Organizer | Elements 6 or later

Comparing data in the database with the input text

hi there i have problem with the comparing data in the database with the input text. here is the piece of code of mine:
//declaration
datasourcedb.connect();
String stcode = req.getParameter("txtCode");
ResultSet rs = null;
String action = req.getParameter("action");
ResultSet portquery = null;
if (action.equals("SELL"))
-->portquery = datasourcedb.query("SELECT stockcode FROM portfolio where stockcode =\'"+ stcode + "\'");
-->portquery.next();
-->if((portquery.wasNull()) == true)
disp = req.getRequestDispatcher("error.jsp"); }
else */
Status = "Sell";
datasourcedb.close();
with the code that i marked with --> it doesnt work since i have to compare the input text stcode with stockcode in the db. could anyone tell me how to compare it?
regards
virginia

i have try to change into this code:
if (action.equals("SELL"))
portquery = datasourcedb.query("SELECT distinct stockcode FROM portfolio where stockcode =\'"+ stcode + "\' + and userName = \'"+ user + "\'");
if(portquery.next()) {
Status = "Sell";}
else {
disp = req.getRequestDispatcher("error.jsp");
but so far the coding doesnt give any result.... could anyone help me? since the coding does not reach status n the disp

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

HT201210 I plugged my iphone 3g into my computer to update an app and I lost my address book and photos. How do I get them back. The "sync" deleted one year of information . HELP

I plugged my iphone 3g into my computer to update an app and I lost my address book and photos. How do I get them back. The "sync" deleted one year of information. I'm "technically challenged" ! HELP

Did you create these notes in the iPad notes App ... I assume?
This support article will explain how you can restore from a backup - which is what you have to do in order to have any chance of recovering your note.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
But you have to remember, that you will lose any of the notes that you have taken since the date of the last backup. If you synced your iPad last week, then you will lose a whole week of current notes - or whatever notes you have created since your last backup. When you restore from a backup - you restore everything in that backup onto the iPad - that was on the iPad on the time and date of the backup.
If you backup every day, then all of your notes should be recoverable from the backup - except for any notes that you took since you last backed up. There is no foolproof way to recover everything once you start taking more notes or creating new documents or whatever that you do in an app unless you are syncing those notes with iCloud and backing up all of the time or unless the app is set to sync with iCloud as you work on the files - like in Pages, Numbers or Keynote - Apple's iWorks apps.
If you decide to restore from an iTunes backup you should turn off at sync before you try restoring because iTunes will want to backup your iPad right away when you plug it in and you will lose your old or last backup.

I am a Creative Cloud Member and have the Membership for one Year but in one month it syays expired

I am a Creative Cloud Member and have the Membership for one Year. It has been only one Month and the Plan says expired. I am not sure what has happened but I am unable to find any Customer Care Number of Adobe. Can anyone please help. Its Urgent. I use MAC.

Moving this discussion to the Adobe Creative Cloud forum.
Abhishek_zico you should be able to contact our support team at Contact Customer Care. You will want to work directly with our support team regarding the status of your subscription.

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

Looking for a browser or app with one click data entry

One thing I miss on the iPad is the ability to quickly enter information in web sites like my name, e-mail, etc. For example, Firefox for windows has an add-on called "InFormEnter" which places a check box next to each data entry block. Clicking on it allows entry of the information with one additional click. I know that some iPad password managers will remember this info, but most seem to require entering a password each time you use it.
Mercury browser for the iPad remembers data for visited sites but seems to require manual input for every new site.
Is there an app or browser for iPad that will work without entering a password or requiring manual input for every new site?

The subscription version of LastPass has formfill capability and syncs information from your LastPass account that works on multiple platforms/OSs.

Can I use the database with as the ses as a regular database?

I write a application base on SES recently, and I need to store some data in the database. Can I use the the database with ses?
I can login using sqlplus login the database using the same pc as the ses installed, but I cannot login using sqldeveloper on other pc.
I set ORACLE_HOME equals SES_HOME
ORACLE_SID as ses

I have similar requirement to connect to the database.
I have removed those two lines from sqlnet.ora.
However, when I using tnsping, I got below error
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=SES.us.oracle.com))(ADDRESS=(PROTOCOL=TCP)(HOST=144.25.165.5)(PORT=1521)))
TNS-12541: TNS:no listener
anythings else that I need to do

I want to access the database with user name and password without con. info/udl

hi to all,
im doing project related with database... normally i'll connect ***.udl file to open database.vi.
now what is my question is I want to open the database with the user name with password.... y i need this because once i run the program the program should ask username and password to open database for write/read operation. if its wrong user name and password means program should be denied...
can any tell how to access the database toolkit with the username with password....
im using labview 7.0...
i think my question is clear....waiting for reply thank you in advance...
pls see this attachment.....
Regards,
N. Srinivasan
Attachments:
access.vi ‏37 KB

i have already read that link in the discussion forum...but im still have some confussion in... i attached file is so like to give user name and password..?
and one more things can tell wat to do in ODBC and MDB and in UDL for password lock.. each time i run the promgram it should ask password to acces the database..
thank you a lot for your reply..
it will be more more useful if u clear my doubts clearly....
Regards,
N. Srinivasan
Attachments:
user=pass.PNG ‏35 KB

Simplify recovery after opening the database with the RESETLOGS option

Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advance

vk82 wrote:
Hi All,
I just have doubt ,regarding the topic which is given in Oracle 11g Exam Syllabus for upgrading from 9i to 11g OCP.The opic is
*"Simplify recovery after opening the database with the RESETLOGS option"* in this topic what one need to study.
As i am little bit confuse related to "Recovery through RESETLOGS and reset of the incarnation of the database".
Kindly correct me if i am wrong
Thanks in advanceyou are correct so you can mark this thread as answered
Handle:     vk82
Status Level:     Newbie (35)
Registered:     Nov 21, 2010
Total Posts:     733
Total Questions:     180 (115 unresolved)

REUSE_ALV_GRID_DISPLAY - updating the database with new values

Hi,
I am using the function module 'REUSE_ALV_GRID_DISPLAY' to display records. I have managed to open a field for input/edit mode. Once this data has been changed , where will this data be? I have checked the internal table - no joy. I need to use this new/changed data to update the database with the new values.
Thanks,
Leanne

Hi,
The data is stored in table tab. After the changes the data does not reflect in table tab. Where can I get the data so that I can update my database?
I have coded the process as follows:
    when '&SUSPEND'.
      loop at tab
        where box = 'X'.
          update zzzz
            set status       = 'SP'
      endloop.
Regards,
Leanne

HT1423 after power interruption -all my folders went back with 3 years dates, jow do i return lost files?

after power interruption -all my folders went back with 3 years dates, How do i return lost files?

Malachi1234 wrote:
all my folders went back with 3 years dates
On what exactly? Your computer?
Do you have a backup off the machine that's stable?
Now your files are still likely there, it's just a naming issue or a PRAM/SMC problem for power and a cache corruption issue for the files.
If you don't have a backup of your files, copy everything you can to a external storage drive and disconnect it.
Next run trhough this list of fixes, I suspect the SMC/PRAM reset will help with the power issues and the #12 OnyX cache cleaning routine will set your folders right.
Remmeber after the PRAM reset to set your time and date correctly. Pehaps that is what s throwing off the date on the folders?
It's really hard to figure your problem out with the information provided.
https://discussions.apple.com/docs/DOC-3353
Again your files are likely very much still on the drive, you can recvoer anything as long as it hasn't be secure erased or overwritten by new data yet
Create a data recovery, undelete boot drive

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

Dublicate the database with one year data

Similar Messages

Maybe you are looking for