Can't build packages not enough space [Solved]

I'm trying to compile latest -ck kernel but after it gets built I get an error saying: there is not enough space to build package.
I remember that last time I was compiling the kernel, I've set-up so that /tmp is loaded in memory or something like that..
And now when I try to compile the kernel, even though I choose menuconfig I still don't get in ti, to turn it off or even check what it was.
My /tmp just have 1,3GB free space left, so that could be it, but I doubt it...
Last edited by Primoz (2010-06-03 11:46:33)

fukawi2 wrote:
Copy paste the actual error message and surrounding test (eg, the output from makepkg) would be helpful.
EDIT: Spelling
Yeah I tought so... Sorry for not including it in my OP, but I've just done it then and forgot to copy-paste and didn't want to do it again.
/bin/sh: line 0: echo: write error: No space left on device
make[1]: *** [crypto/lrw.ko] Error 1
make: *** [modules] Error 2
==> ERROR: Build Failed.
Aborting...
ERROR: makepkg exited with an error (512)
WARNING: expected package does not exist: /tmp/bauerbill/build/aur/kernel26-ck/kernel26-ck-2.6.34-1-x86_64.pkg.tar.xz
--> scanning /tmp/bauerbill/build/aur/kernel26-ck for matching packages...
ERROR: no package found: /tmp/bauerbill/build/aur/kernel26-ck/kernel26-ck-2.6.34-1-x86_64.pkg.tar.xz
:: Abort? [Y/n]
aborting...
That's what happens, but I think it is problem with root, as when this happens there's only 9,7MB free space left.
I guess I have either remove unneeded packages or make root bigger...

Similar Messages

  • Can't restore iPad, not enough space, lost Pin to get in.

    Password was changed on iPad and when trying to restore to factory settings, I can't as there is not enough space. What can I do?  I can't see the iPad on "Find my iPad" on iCloud either, so that is not an option.

    Hello jlawre23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Best of luck,
    Mario

  • Can't update ipod - not enough space but nothing is there

    First, yes I have read the entire discussion a couple of threads down and it didn't help!
    I have a new 2gb nano and am trying to load songs for the first time, using Windows XP. Every time I try to update, I get a message that it can't because there isn't enough space. I restored as suggested on a previous thread. I checked all my tracks and they are all 128. All my tracks are 3-4 mb. I do have more stuff in my library than would fit on my nano, but under options I have checked to only update playlists I specify and only update checked songs. I only checked one playlist and even went so far as to only check one song. So it won't even upload that. Showing 1.9g free space.
    Any suggestions?
    nano 2gb   Windows XP  

    I think everything should be current. I downloaded the most recent iTunes yesterday when I got the ipod; Updater I just downloaded for the first time yesterday, as well as the ipod software. iTunes software is version 6.0.5.20 and ipod software is version 1.2. Yes, my preferences for only checked tracks and playlists, etc. were still there.
    So I just now tried manually synching one playlist (the same one I was trying to do automatically before) and that worked fine. Which is some relief because now at least I have 70 songs instead of 0.
    Subsequently decided to try out the new FM transmitter, which also worked fine, then came back thinking I would add some more manually. Now when I plug the ipod in, I get the message that the device can't be recognized. Tried the other USB port to no avail, same message. I know my port works because I run my printer off of it.
    Arrrrgh!

  • Trying to build a DVD image, DVDSP4 says not enough space

    I have many years' experience using DVD Studio Pro 4, so this hopefully is not a stupid question.
    I'm using an iMac with 80gb free and an external HDD with 12gb free.  I have authored a DVD in DVD Studio Pro 4.  The project says it's 4.6gb.
    I need to make a disc image file of the DVD so I can burn it to DVD media using another computer.  When I do this, it encodes for hours and then says "Formating Failed.  Not enough space of the output media"  (I might be paraphrasing.)
    The only possiblt output medias, the iMac and the external drive, both have plenty of space, and the project is under the limit.  So what gives?

    Let me try this again, because I think we're not communicating.
    I have authored a DVD Studio 4 project with menus and assets, etc.  It simulates just fine.  The tab on the top of the DVDSP screen indicates my project is 4.6gb.  This means I should have no problem turning this project into a DVD.  The computer I'm working on has no DVD burning capabilities so I want to create a disc image of the project instead of burning a DVD.  I have done this before, where DVDSP encodes and builds a file that I can then use Disk Utility to burn to a DVD.  So, once I have my disk image, I will transfer that file to another computer, and use Disk Utility on that second computer to burn the DVD from the disk image.
    NOW
    The problem I'm having is that DVDSP is not able to make the disk image.  When I go to "Build/Format", it should make a disk image, but instead, I get an error saying there is not enough space on the output device.  The "output device" in this case is my external Hard drive which has plenty of space.  That is why I am asking for help.

  • ActiveSync Result: Not enough space on server. How can I help resolve this problem? Won't let me send out emails.

    I can't seem to send out emails because I keep getting an error when it's trying to Sync by reading" There is not enough space on the server to sychronize info. Deletoe some old items from your exchange mailbox"
    I dont have any messages in my folders, and I'm trying to send an email. How come this isn't working? Any way to help solve it would be greatly appreciated, thanks!
    Post relates to: Treo 800w (Sprint)

    Do you have any items in the delete items? If not check with your IT and see if any changes to the server was made or what could be causing this problem.
    Post relates to: Palm Z22

  • I have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can  get my money back

    i have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can  get my money back

    Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
    http://support.apple.com/kb/ht2519
    Download to your computer and then sync to your iPod touch whatever will fit.
    And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted.

  • After accepting update to my time capsule, I can no longer complete a backup because there is not enough space.  I tried deleting old files, but it doesn't seem to work.  Any advice:

    My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer.  The message is that there is not enough space.  I tried deleting my files, but it didn't help.  any suggestions?

    How much space is there according to airport utility?
    TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
    And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

  • CAN NOT UPDATE AS ITUNES SAYS NOT ENOUGH SPACE ON PHONE

    wHEN TRYING TO SYNC WITH MY IPHONE  I GET A MESSAGE SAYING THAT THE PHONE COULD NOT BE UPDATED AS NOT ENOUGH SPACE FOR A 1.1 MB SYNC.I HAVE OVER 2.5 GB SPACE. BUT STILL WILL NOT UPDATE

    Hello Peter39,
    After reviewing your post, it sounds like the iPhone will not update because it needs more space available. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you need more space for an iOS update - Apple Support
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can anyone assist me?  I have backed up my Iphone 4 however now cannot restore as not enough space?  I need to get this sorted by tonight?

    I have recently backed up my Iphone 4.  However now it will not restore as it claims I have not enough space on the iphone.  I am in a major hurry to get this up and running by tonight as need it for work ?

    Hey annefrombeach,
    Thanks for the question. It sounds like you are unable to restore your backup due to an error message regarding not enough free space. The following resource outlines troubleshooting steps for this specific error message:
    iOS: If you can't back up or restore from a backup in iTunes - Apple Support
    http://support.apple.com/en-us/ts2529
    Thanks,
    Matt M.

  • Can't download itune movie, not enough space 6gig available?

    Can anyone help, I have approx 6 gig of space available, but I cannot download a movie I purchased from iTunes, I get the message not enough space available, use settings to manage?

    Both are true.
    Your have lost of iCloud space.
    The problem is you need space on the iPhone.
    On the iPhone
              Setting > General > Usage select Storage
    See what is taking up space on the iPhone.
             Delete what you don't need.

  • Trying to upgrade to newest version of iPad software but not enough space on hard drive to backup the iPad. It is saying if I continue all content on iPad will be deleted! Can I get it back after uprade by just synching with itunes?

    Trying to upgrade iPad software to newest version. It downloads but stops while backing up and says not enough space on hard drive to back up if i continue all media on iPad will be lostor deleted.  Can I get it back after upgrade by just synching or can I set it to backup to an external drive?  Thanks for any help.  I only use the laptop for itunes now as it has such little space left.

    I would recommend deleting contents off your hard-drive to make space (how much is left..you should be having 15% free as a general practice) and backing up the phone prior to upgrading.

  • I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

    I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

    There shouldn't be any fee involved.  Call the Apple online store for your country (1-800-MY-APPLE in the U.S. and Canada) and request a refund.
    If the download is stuck, you can download in iTunes on your computer, then sync it to your iPad once your free up some space.  This explains how to download your previous purchases to your computer: http://support.apple.com/kb/ht2519.

  • Time machine back up- not enough space  so can't back up?

    hi my computer entire hard drive is 2TB and only 1Tb used. and my external hard drive(time machine back-up) is 2TB. and right now Time machine back up failed. and keep saying that hard drive don;t have enough space....
    i erase all from external hard drive ,, back up NEW. and still saying that not enough space on back up drive, weird thing is and i have 2.8 TB to back up.. but my entire hard drive is only 2TB .. what is that? and i only used 1.1 TB ish..
    somebody help me? how can i use time machine back up with this issue?

    What's shown for +Estimated size of full backup+ under the exclusions box in TM Preferences > Options?
    If that's over the 1.1 TB used, there are a couple of possibilities:
    Another internal or external drive, formatted for a Mac, is connected but not excluded, so Time Machine is trying to back it up, too. Exclude it, per #10 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    Something on your internal HD is corrupted, making Time Machine think it's much larger than it really is. Verify your internal HD, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

  • Can't recreate iphoto library from time machine. Sais there is not enough space where there is more double.

    can't recreate iphoto library from time machine. Sais there is not enough space where there is more double.

    Recover the iphoto library to a different location eg, a USB drive.. since there could be issues with the new photo app.

  • Can't restore from backup because not enough space on iphone? huh?

    I am trying to simply restore my iphone from a backup on my laptop because I accidentally deleted an app of mine with important data.  When I go to restore the iphone though from a backup it tells me that it can't restore b/c not enough space on iphone.  I don't see how that makes sense since if it's a backup from the same iphone I'm using, how can there ever not be enough space to restore it?  I've also already searched other peoples problems and my hard disk has plenty of space on it where itunes and the backups are installed.  I've tried moving the temp and tmp folders but that didn't do anything. 

    I restored to an older backup which seemed to go through but now when I then try to restore to a newer backup it says on the phone "restore complete" and then it gives me same error message on computer.  When I look at phone it seems to have restored my notes and contacts, but not my SMS or my calendar. 

Maybe you are looking for

  • In Sales Transaction 'crmd_order' Implementation of Opportunity BAdI

    Hello All, I'm facing a problem in Sales Transaction 'crmd_order' . I'm displaying an opportunity . In this opprotunity page, Start Date is displayed in 'Details' tab. I want to display this start date in a field of  'Milestone' tab. This is Standard

  • Logging entries appearing twice

    Hi, I've a problem with log4j and Apache Commons Logging that I'm hoping someone can assist with. Logging appears twice in my application logs. I've a single log4j and a single commons-logging jar on my classpath. My log4j.properties simply contains

  • Start OCR by vba commend (IAC, OLE, JS, ...)

    Dear All, I Would like to start OCR from a document by vba commend (IAC, OLE, JS, ...) How? Kind regards, Dave van Gaalen

  • Why Is OS X Lion Still Broken?

    Is there a fix for the Lion Root User Logout Problem? After logging into the root user on Lion I cannot logout by choosing logout, I cannot shut down the computer by choosing shut down, I cannot restart the computer by choosing restart, and I can not

  • Transport routes

    Hi I'm a BW consultant and would like to know if it's at all possible to transport objects from 'n production system to a development system. I' don't want to make any changes in production but would like to have the production version of the object