DUE DATE FOR CREDIT MEMO

Hello,
I have a question about credit memo -due date.
Using MIR7, MIRO for credit memo  the due date for net payment is the same with baseline date.
e.g. document date:18/07/2007
posting date:18/07/2007
baseline date:18/07/2007                         terms of payment are 30 days
the system issue due date : 18/07/2007 but correct is 18/08/2007
What can I do to calculate due date correct for credit memo ? (baseline date + terms of payment) ?
Thanks.

Hello
Check the settings in "Terms of Payment"
Check what you have checked in "base line date calculation', I think you need to enter 1 in the box additional months.
Next in the default date setting, check if you ticked "posting date "
Reg
*assign points if useful

Similar Messages

  • Sales Credit Memos, Payment terms and due date for payment

    Hello all,
    does anyone out there know how to get the terms of payment assigned to sales credit memos taken into account when the due date for payment is calculated in the accounting document?  (I know this is a bit puzzling as why should one need payment terms for a credit memo)
    I have looked at SAP notes 17410 et al..but remain unclear re how 'V' is populated in BSEG-REBZG.

    Number of the Invoice the Transaction Belongs to
    For line items which are related to another line item, this field contains the number of the partner document.
    Use
    In the standard system the field is used for:
    o   Credit memos which refer to a particular invoice item
    o   Subsequent invoices for an invoice item
    o   Partial payments for an invoice item
    o   Partial clearings of down payments.
    In the first two cases mentioned, the terms of payment are copied from the cross-referenced invoice item into the item currently being processed. This ensures that items due on the same date are paid together by automatic payment.
    A special rule applies to credit memos which have a "V" in this field.  The due date is determined in the same way as for an invoice. If the field is empty (containing neither a document number nor a "V") the due date is the baseline date for payment.

  • Effect on SD Credit Limit when extension of Due Date for Certain Invoices

    Dear SD Members,
    Brief Description
    Extension of Due Date for Certain Invoices
    Due Date extension to be made for certain invoices posted in FI
    Requirement
    After Billing is done and invoice is posted in FI management may decide to postpone due date for certain for any particular invoice for a specific customer.
    The payment term will be changed in the invoice and due date should change. But for this no SD credit limit should be affected. The change can only be made by specific user with authorization. The bank also will be intimated with details from SAP.
    What I want to know will there be any effect on SD Credit Management part, when from FI side invoices payment terms due date will be extended. Please share your view & suggestions on this.
    Regards
    Subrat

    There will be no affect on the credit mgmt..... the credit screen captures the total open AR... it does not consider Aging in AR.... all the values even if not due r calucalted in the open AR purpose for Credit....

  • Calculate due date for vendor payment

    hi friends,
    In my project i need to calculate the due date for vendor payment.as my client maintain different payment terms for different vendors am not able to pick the payment key from t052 table and calculate the due date.
    do anyone have a solution for this......
    prajith

    Hi
    You can insert Payment terms in Vendor master and also you can change or assign payment term while making transaction.
    But first of all you should have payment term.
    IMG -- Financial Accounting -- Accounts Receivable and Accounts Payable -- Outgoing Invoices/Credit Memos -- Maintain Terms of Payments
    Regards,
    Amit

  • Problem with baseline date of Credit memo

    Hello all
    The issue is like this: if I am posting a credit memo using TCode- FV75 then then the baseline date is picked automatically as the document date but if I use TCode: FV70 then the baseline date is not picked.
    Can anyone please tell as what is causing this issue :
    Thanks in advance.
    Regards.

    Dear all,
    A credit Memo without an Invoice Reference is always due on the
    Baseline Date (the Exceptions to this are Credit Memos which have an
    explicitly-stated Value Date)" > this Logic was introduced starting
    from Release 3.1I.
    Summary:
    1. Credit Memo with Invoice Reference have the same Terms of Payment
       and Baseline Date as the Invoice.
    2. For the Credit Memo without Reference to an Invoice, there are 2
       methods available for choosing the due Date :
    a) The Due Date for Net Payment (RFPOS-FAEDT) is identical to the
       Baseline Date for Payment (BSEG-ZFBDT). The Period for Net Term or
       the Term of Payment is not taken into Account. This is the Default.
    b) Or the Credit Memo is due based on the Payment Terms. For this,
       you must enter the Indicator "V" in the Credit Memo Field BSEG-REBZG
       "Invoice Ref", in addition to the specified Payment Method.
       You can modify this Field for the Credit Memos already posted.
       => the above Details are documented in the Help F1 behind the
       "Invoice Ref" Field.
    Manual filling of the Field can take place during the Entry of the
    Credit Memo, or in a Document Change Transaction:
    Run transaction FB02 to call up the Credit Memos. Drill down
    to Customer Line Item. Here, you should be able to see the Field
    "Invoice ref.' (BSEG-REBZG). Place a 'V' in this Field. With this,
    the Credit Memo is due based on the Payment Terms.
    I hope this helps.
    Mauri

  • FBL5N  - incorrect  Due Dates for Downpayment invoices

    Hi.
    On a Down Payment Invoice to customer, the Due Date shown (on Invoice Form) is Correct according to the Terms of payment.  (eg : Baseline date + 8 days)
    However, in the FBL5N, the Net Due Date field shows the Baseline date as due date !
    Why is it so? How do I ensure that FBL5N displays correct due date according to the terms of payment.
    Thanks in advance for your suggestion.
    regards,
    Jai

    Hi,
    I had a similar problem with CREDIT MEMO.
    The System behaves as following:
    a credit Memo without an Invoice Reference is always due on the Baseline Date (the Exceptions to this are Credit Memos which have an explicitly-stated Value Date)". This Logic was introduced starting from Release 3.1I. Please see Details in Note 79871 and 84137.
    Summary:
    1. Credit Memo with Invoice Reference have the same Terms of Payment
    and Baseline Date as the Invoice.
    2. For the Credit Memo without Reference to an Invoice, there are 2
    methods available for choosing the due Date :
    a) The Due Date for Net Payment (RFPOS-FAEDT) is identical to the
    Baseline Date for Payment (BSEG-ZFBDT). The Period for Net Term or
    the Term of Payment is not taken into Account. This is the Default.
    b) Or the Credit Memo is due based on the Payment Terms. For this,
    you must enter the Indicator "V" in the Credit Memo Field BSEG-REBZG
    "Invoice Ref", in addition to the specified Payment Method.
    You can modify this Field for the Credit Memos already posted.
    => the above Details are documented in the Help F1 behind the
    "Invoice Ref" Field.
    Manual filling of the Field can take place during the Entry of the
    Credit Memo, or in a Document Change Transaction:
    Run transaction FB02 to call up the Credit Memos. Drill down
    to Customer Line Item. Here, you should be able to see the Field
    "Invoice ref.' (BSEG-REBZG). Place a 'V' in this Field. With this,
    the Credit Memo is due based on the Payment Terms.
    To automate this process:
    You can use user exit SDVFX001 to fill the value "V" in field
    BSEG-REBZG. Steps to activate the user exit
    - transaction CMOD to create a project, your own naming convention,
    include SAP enhancement - SDVFX001
    - The function module called by SDVFX001 is EXIT_SAPLV60B_008,
    make your ABAP coding in include program : ZXVVFU01. Populate field
    ACCIT-REBZG with 'V'.
    - Activate project via CMOD.
    I hope this could be helpful for you.
    Thanks,
    Marco Vismara
    Message was edited by:
            Marco Vismara
    Message was edited by:
            Marco Vismara

  • Payment Terms for Credit memos

    Hi,
    Please explain to me what is the significance of payment terms in credit memo. I understand that credit memo are sort of returns (sales returns or purchase returns). I am able to understand the payment terms for an invoice (which would determine the due date for the receivables and payables). But I am not able to understand the use of payment terms in credit memo...
    Please assist.
    Thanks in anticipation
    Satya

    Hi Satya
    A credit Memo without an Invoice Reference is always due on the Baseline Date (the Exceptions to this are Credit Memos which have an explicitly-stated Value Date):this Logic was introduced starting  from Release 3.1I.
    Details in Note 79871 and 84137.        
    As a result, it is due immediately at baseline date.                  
    Summary:                                                              
    1. Credit Memo with Invoice Reference have the same Terms of Payment  and Baseline Date as the Invoice.                                                                               
    2. For the Credit Memo without Reference to an Invoice, there are 2 methods available for choosing the due Date :                      
    a) The Due Date for Net Payment (RFPOS-FAEDT) is identical to the  Baseline Date for Payment (BSEG-ZFBDT). The Period for Net Term or the Term of Payment is not taken into Account. This is the Default.
    b) Or the Credit Memo is due based on the Payment Terms. For this, you must enter the Indicator "V" in the Credit Memo Field BSEG-REBZG  "Invoice Ref", in addition to the specified Payment Method.        
       You can modify this Field for the Credit Memos already posted.     
       => the above Details are documented in the Help F1 behind the  "Invoice Ref" Field.                                                                               
    Hope it answer your question                  
    Kind Regards
    davide

  • Terms of Payment for credit memo

    Dear Friends:
    I have created  terms of payment (Z12). This has to be used in credit memo in customer - T.code F-27 .But in customer master, there is a different terms of payment.How can i use the newly created terms of payment(Z12) in T.code F-27.
    The New Terms of Payment should be in the credit memo by default. Is there configuration settings by which the new terms of payment are selected by default?
    Please advise.
    Regards
    MSReddy

    Hi MSReddy,
    There should be a field in the customer master/company code data/payment transactions tab to enter the payment terms for credit memos.
    If this is not displayed for your customer group check screen layout settings for customers.It might be supressed.
    Regards
    Nadini

  • How to use due date in credit management

    hi,
    i want to calculate my credits according to net due date
    how can i use due date in credit management?
    thank you

    Not sure what do you mean by "use due date in credit management". 
    If  you want to calculate due date per billing document, for example, for such as customer statement, you may use "BSID-ZFBDT + BSID-ZBD1T" (Baseline date + Cash disc day 1).

  • Regarding rate, sales tax and discounts for credit memo request and returns

    Dear  ALL,
    Rate column is not displaying for credit memo request. suppose credit memo should be given due price diifererence
    with referance to billing documnet credit memo request to rised. but if i want to edit rate column is not available.
    how vat and discount has to be captured in case of rate diifferance for credit memo.
    In case of returns will taxes applicable for returns credit memo
    Gl accounts for credit memo same as billing or different GL accounts to be maintained or not
    client has the scenario that if credit memo request has been rised for with referance to billing due to rate differance.
    If customer returns materilas belongs to same billing. so based on the returns order returns credit memo to be rised .
    But how the sap captures exact price of the materila during returns. ie; price modified during credit memo request.
    Thanks & Regards
    ramesh

    HI,
    Remove all the other condition types from the procedure and keep only those which you need.
    Regards
    Abhilash

  • Mass change of pricing date and billing date in credit memo request

    Hi,
    Can i change the billing date pricing date on credit memo request docs using MASS transaction?
    If i enter the regular sales order number it prompts me to change the value but if i enter the credit memo request doc number,the message "No data meets the selection criteria" is displayed.I also checked with IDES ,message is the same
    Is there any different way to do mass change for credit memo requests or am i missing something here.
    Please Suggest
    Thanks
    Abhilash Nayak

    Hi,
    Go to the transaction code MASS  and enter the OBJECT  TYPE as BUS2032 and enter
    It will lead you to the next screen where you can find the  Table and Field TABS
    Select the  SALES ORDER HEADER DATA  and choose the fields data and choose the fields PRICING DATE and BILLING DATE  and execute
    In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
    Key in all the documents and execute
    Now change the date as per your requirement and check the effect
    regards,
    santosh

  • How add EMPST for Credit memo with segment E1EDP01_IDOC

    Hi experts,
    Do you have any ideas for add data in EMPST for segment E1EDP01 (receiving point, in Shipping view) for credit memo ?
    I can add this data for standard order but not for credit memo..
    My segment E1EDP01 (exemple of WE19) :
    If i try to create an credit memo with these data that doesnt add value for EMPST in my order. But if i change the type of document for an standard order that's work and add the value for EMPST ( i change type of document in E1EDK14).
    I haven't any ideas for add EMPST for credit memo, did you have ideas ?
    Thank's a lot.
    Umti

    Hi
    while creating credit memo
    in item level enter the  material number and material type or g/l account number if you want to post such costs.
    hope it helps

  • Standard Process for Credit Memo & Debit Memos in CRM

    Dear all,
    What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
    We can successfully replicate Return Items and Replacement Items in ECC Return Order
    But I don't know how to process Credit Memo and Debit Memo in ECC.
    What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
    How to see the entire document flow?
    I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
    Kindly educate me in this regard. Your suggestions are highly appreciated
    Best regards
    Raghu ram
    Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
    Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

    Hi suchi,
    The following would be very useful to you.
    To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
    <u><b>SD:</b></u> Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
    <b><u>MM</u></b>: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
    <b><u>FI:</u></b> Dunning Notice
    All can easily adapt these forms to their requirements, saving time and money.
    Hope this information has been useful to you.
    if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
    the sap script for the same is -> <b>F140_DOCU_EXC_01</b>
    Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
    I hope this will be an amicable solution.
    if helpful pls reward.
    Thanks
    Venugopal

  • Can't set due date for to do in iCal

    I'm not sure if I'm blind or not, but i can't seem to set a due date for my to-do events. There's an option to say that there is a due date, but all it does is that it bring the view to the current day and changes the icon to an alert icon.
    Is anyone else facing this problem?
    I'm using iCal Version 3.0.5 (1270).

    qwertyjem,
    Click on "due date" and define your requirements (day/month/year) ...if...you have set the preferences to match your requirements in System Preferences...>International>Formats>Region:/Dates/Times.
    ;~)

  • I am having problem while doing vf01 for credit memo

    I have done va01 for credit memo.
    but when i m doing vf01 for credit memo it is showing account detemination error.
    pls help me.

    Hi suchinder
    Go to t.code VKOA and check wheather for the credit memo billing document type your account determination procedure  KOFI00 has been assigned or not. If not assigned assign it and then save the billing document again then it will be forwarded to FI .
    Regards
    Srinath

Maybe you are looking for