DUETE standard reports not returning to Sharepoint.

Hi Holger (or Anyone else who might know)
Im still busy trying to get the standard scenarios of DUET E working. In parralell to quite a few other issues, Im trying to get the reports working.
To be specific, Im trying to run the "Display User names as a list output" report.
I am able to run the report from Sharepoint. As far as I can see in the scl logs ( /IWFND/VIEW_LOG) all is ok ( all green log items) . The last entry is REPORT_RESULT_SET and the direction in from SAP System to SCL. Furthremore, I dont see any errors in the srt logs, or icm logs.
My report does not appear in the drop off center on Sharepoint.
I have run the report manually directly in SAP and it does give results, and as I said I dont any related errors anywhere.
I have been through the trouble shooting guide ( http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/603ab5a0-184b-2e10-98a7-fa7e7e9da7a1?quicklink=index&overridelayout=true ) but ive not been able to check that the generated http destination is correctly configured because im on basis SP08 of NW702. I would however expect an error in srt_util or the trace in SOAMANAGER if there was an authorization, or a different, error when calling the OBAfilereceiver service.
Any ideas what else I can check? Im quite lost.
Sincerely
Adam
Edited by: Adam Smith on Sep 14, 2011 1:51 PM

Hi ,
Applicable to NW702 SP 08.
Problem was solved by manually creating the Logical Ports in SOAMANGER using the following instrucions:
1.     In SOAMANAGER, Search For the Consumer Proxy u2018/IWTNG/CO_OBAFILE_RECEIVER_SOAu2019 and click on u2018Apply Selectionu2019 button
2.     In Details of Consumer Proxy pane, click on Configurations tab.
3.     Click on Create button and enter u2018Logical Port Nameu2019, u2018Descriptionu2019 and select the radio button u201CManual Configurationu201D and click on u2018Apply Settingsu2019 button.
4.     In configuration of Logical port section, under u2018Consumer Securityu2019 tab select radio button u2018User ID/ Passwordu2019, and enter Username and Password for WSDL access.
5.     Click on u2018Messagingu2019 tab and in u2018Message ID Protocolu2019 dropdown select u201CSupress ID Transferu201D.
6.     Go to u2018Transport Settingsu2019 tab and set appropriate values the following fields
a.     URL Access path
b.     Computer name of Access URL
c.     Port Number of Access URL
d.     URL Protocol Information = HTTPS
e.     Transport Binding Type = SOAP 1.2
7.     Go to Operation Specific Tab and enter soap action for SubmitFile and GetpublishingLocations operations and uncheck the checkbox for both operations.
a.     SubmitFile = http://schemas/oba/2010/OBAFileReceiver/SubmitFile
b.     GetpublishingLocations = http://schemas/oba/2010/OBAFileReceiver/GetPublishingLocations
NOTE: Do not forget to uncheck the checkbox behind the input fields otherwise the values you enter will not be saved.
8.     Go to Administrative Information tab and make this logical port as default and click on save button
Regards
Adam

Similar Messages

Info Records Per Material Group Standard Report Not Running at All.

Hi Experts,
We had a Small problem Where while Running Info Records Per Material Group(T-code ME1W ) Standard Report the Report is not Showing any output in PRD, where else running Info Records Per Material (T-Code ME1M ) Standard Report the Output is getting Displayed.
Our System is Currently SAP EEC 6.0 & Application Package SAP_APPL is of release 604 & Level 0007, Highest Support Package is SAPKH60407.
is this Issue covered in Some OSS Note?
Thanks & Regards
Priyesh Shah

Hi,
The info-records for the materials which appears in the standard report ME1M/ME1L is different from the one which appear in ME1W.
If you try with the material groups of the ME1L or ME1M info-records it wont be displayed in ME1W.
ME1W will display only the info-records which are created @ material group level.
i.e. try to create a new info-record using ME11 without entering material, in the general data screen you have to enter the material group & other parameters.
Now once you save this info-record,same will appear in ME1W.
Hope its clear.
Thanks & Regards,

Regular Report Not Returning All Rows

Greetings,
On APEX version 4.1.1.00.23 Using latest versions of Chrome and IE. I found some threads that discussed this aspect some, but not to the extent that is helpful to my situation.
I know it is crazy to have APEX return 40K+ rows on a report, but I have a need to do so. I need to return that many rows from a table so that an APEX page can be opened via Excel and then have an Excel macro run over the report results and import all 40K+ rows into a worksheet. As I said, that's crazy, but the decision isn't mine. :-) We have the macro working and it passes parameters to the APEX page and imports data from the APEX page.
Also, the report has 14 columns on it, not that many.
Given the requirement above I have a regular report page that only has the report and 2 page items on it. The page items contain values that are passed via Excel and are then used in the WHERE condition of the report. Using the same WHERE condition, when I run the SQL for the report outside of APEX it returns 46,840 rows. I have the both the Number of Rows and Maximum Row Count settings set to 50000. And, I have the Pagination Scheme set to Row Ranges X to Y of Z (with pagination).
When I run the page and enter the selection criteria the report only returns 15,500 rows. Yes, that's a lot rows. And, it takes about 5 minutes to populate. But, it doesn't return ALL of the rows. Also, the pagination suggests that all rows were returned because it reads - row(s) 1 to 15500 of 15500. I have changed the pagination and max rows settings a lot to see of it's just a matter of having the correct report setting. I've yet to find a setting that will cause the whole 46840 result set to be returned.
It may end up that the report selection needs to change in order to return fewer rows. But, regardless of that why isn't APEX returning the complete result set now? And, is there a way to force it to return the complete result set regardless of the size?
Any suggestions are appreciated.
Thanks, Tony

cloaked wrote:
Thanks for the response. Yup, you're correct. Downloading to a CSV might be better. I've set reports up that way many, many times. I have even developed pages that import from a CSV into APEX using PL/SQL, years before it was an APEX feature. I initially set the report up to allow it to be downloaded, but the user doesn't want it to work that way.
The worksheet will be used by a lot of people in our accounting department and they want the process to be as simple as possible. Right now Excel opens up the APEX page, logs into the application, passes parameters to it for the month and company, hits the Select button, waits on the report to build, then automatically imports it, and finally closes the page. It is quite slick. Yes, it takes 5 minutes to run, but the user is OK with that given what the automation provides.
So, in order for the automated import to work properly all 45K rows need to display on one page, without pagination. I currently have pagination on the page simply to determine if APEX is returning all of the rows.A process of this nature might work better using an export: XML or export: CSV report template, which won't go anywhere near pagination. When a page containing a report using these templates is requested APEX sends the report results in XML or CSV format rather than rendering the page. This should be faster, avoid complications with pagination, and be easier to parse in Excel.
Previous thread along similar lines: +{thread:id=2285213}+

Reports not returning records utilizing different currency type.

Good morning,
My company has numerous subsidiaries utlizing CRM On Demand. Although our defauct currency is USD, one of our operations enters opportuntiy data in Canadian dollars. Both currency types are active in the system but for some reason, the custom reports I have created are not returning records created by our Canadian company entering in CAD.
There is probably a quick solution, but so far I have yet to find it! Thanks in advance for your feedback!
Ryan

yes...your report won't show data for canadian currency. even the admins won't be able to see it.
try this fix instead:
you will have to create a new field for currency in the opty page layout and change it to canadian dollar otherwise the currency would still appear as USD in the database.
Then use this field in your reports.
This should help. please let us know your feedback.

1099 Misc reporting for US in SAP Standard report not containing any value

HI All,
In my current clients requirement is to get the SAP Standard reprort for 1099 Misc reporting for US
1) Accordingly i have done configuration for Withholding tax for US with tax type FE
2) There are 14 WHT Tax codes under FE , like 01 = Rent , 02 = royalty, 03 = other income etc.
3) Assigned Tax type with Co. Code
4) Activated WHT tax at Co. code
5) Created WHT country US
And also assign WHT tax type FE and respective tax code to vendors in Accounting info in Vendor Master
Posted couple of vendor invoices and made payment for those also
Then after this when i run the SAP Standard report for 1099 Misc reporting for US , then the output contains with no data.. but only contains vedor names and WHT tax code which i have assigned..
I think i have missed some configuration may be . Can any one let me know the detail step by step config and process how to get proper out put in 1099 Misc reporting for US in Standard reporting..
Regards,
Sandip

Hello auroar,
I followed the path that you provided and that lead me to this part of the tree: Define File Format for Withholding Tax Reporting...This is where I found the information that I needed.
Thank you very much.
-Patrick
Edited by: Patrick Smith on Oct 22, 2009 8:41 PM

Standard Report not Displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

hi ,
it depends on the user parameters.
U have to identify the parameter id and u have to activate it in user maintainance partameters .
su01 -> parameters.
ex . parameter id -> SD_VARIANT_MAINTAIN -> X
so u can save layout now.
regards,
manikandan

Double-click in standard report

Hi,
I'm creating a standard report (not an ALV, just write's...) and I need to control events when I double-click on certain caracters on the screen. How can I do that?
Thanks
Carles

hi,
while genarating secondary list based on uer actions( double click), we provide the logic for genarating list unsder AT LINE-SELECTION event.
AT LINE-SELECTION.
<statements>.
When the user triggers the function code PICK, AT LINE-SELECTION is always triggered if the cursor is positioned on a list line. The function code PICK is, by default, always linked with function key F2 and hence with the mouse double-click.
Example for AT LINE-SELECTION.
REPORT demo_list_at_line_selection.
START-OF-SELECTION.
WRITE 'Basic List'.
AT LINE-SELECTION.
WRITE: 'Secondary List by Line-Selection',
/ 'SY-UCOMM =', sy-ucomm.
When you run the program, the basic list appears with the standard list status. The detail list shows that SY-UCOMM has the value PICK.
To pass individual output fields or additional information from a user selected line to the corresponding processing block during an interactive event, use these statements:
HIDE
The HIDE statement is one of the fundamental statements for interactive reporting. You use the HIDE technique when creating a basic list. It defines the information that can be passed to subsequent detail lists.
READ LINE
Use the statements READ LINE and READ CURRENT LINE to read data from the lines of existing list levels. These statements are closely connected to the HIDE technique.
GET CURSOR
Use the statements GET CURSOR FIELD and GET CURSOR LINE to pass the output field or output line on which the cursor was positioned during the interactive event to the ABAP program.
DESCRIBE LIST
The DESCRIBE LIST statement allows you to read certain list attributes, such as the number of lines or pages, into program variables.
follow this link fro more information.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dba42335c111d1829f0000e829fbfe/content.htm
follow this link for sample programs on interactive reports.
http://www.sap-img.com/abap/a-sample-hide-get-cursor-in-interactive-programming.htm
http://www.erpgenie.com/abap/drill_down_reports.htm
regards,
Ashok reddy

SharePoint 2013 SSRS in SharePoint Mode - Reports not loading controls.

Hello All,
I have recently run across an issue that has stumped me and my DBA. We have just walked through installing SSRS 2012 w/SP1 in SharePoint (SharePoint 2013) mode according to these instructions
here. Everything went just fine during the install.
When I create a an SSRS report and preview it in Visual Studio, the report looks great. When I upload that report to a SharePoint library, the report does not return any data and all I see are black X's where all the report controls should be. No drop down
menus and the tool bar across the top of the report does not display correctly.
I've been combing through the ULS and IIS logs and all that I have found are 404's in the IIS logs. I see 404's for each control image that the report is trying to render. Example below.
2014-10-14 16:43:41 XX.XX.XXX.XX GET /URL/URL/Reserved.ReportViewerWebPart.axd OpType=Resource&Version=11.0.3000.0&Name=Microsoft.Reporting.WebForms.Icons.Refresh.gif 80 0#.w|domain\user XX.XX.XXX.XX Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C;+.NET+CLR+3.5.30729;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.30729;+InfoPath.3)
404 0 0 78
Any ideas?
Thanks!

Hi,
Please ensure you have added the content types below to the library where you upload SSRS reports and configured the report properties:
Report
Report Builder Model
Report Builder Report
Report Data Source
More information about configuring report properties:
http://technet.microsoft.com/en-us/library/bb283155.aspx
http://www.cognitiveinfo.com/2013/ssrs-2012-sharepoint-2013-integrated-mode/
Regards,
Rebecca Tu
TechNet Community Support

Standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases"

Dear Friends,
I am facing issues in the standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases" where I am trying to pull the tax posting report for the current period.Here I would like to see the tax postings which are done with the custom t code ZFB01L (mass upload of data) which is the replica of FB01L. The issue here I see is, any postings done via custom t code with tax code does not appear in the standard report t code S_ALR_87012357. Please advice whether is there any alternative transaction code or program where in I can get all tax postings similar to this standard report or do we have to create a custom t code to get such report with the help of ABAPer.
Kindly advice.
Regards,
Siri

HI Siri ,
This report should display all item related to Tax if they posted with tax code . Can you please check below things
1) your custom program with correct tax code .
2) When you run report for tax you do not exclude some Tax code .
3) Please check reporting country in report and check that docuemnt loaded in same reporting country tax code thrugh custmon program ,
Many Thanks

SAP standard sales report not shown data

We have following standard reports for sales. We have authorisation for these reports. But when we execute these report for 3P00 sales org., these reports will not shown any data saying that no data exist.
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis- Invoiced Sales - MC+Q
Sales office Analysis- Invoiced Sales - MC-E
Shipping point Analysis - MC(U
Request you to kindly provide the solution.

Hi,
Have u configured Logistic information system proper - mean to say r u maintained same settings for this sales organization
IMG >>> Logistic genral >>> LIS >>> Logistics data warehouse >>> Updating.
R u maintained statastical group in material & customer master, check that.
Kapil

Standard Report VA05 Adds up Returns Value and Qty :(

Hi Gurus,
We have an issue the standard Report VA05 Adds up Qty and Value of Returns Orders/ Credit or Debit Request which gives up a wrong value when you look at the Total.
I checked up with IDES and it is just the same. Any Help how to overcome the issue
Regards
SK

Hi
VA05 being a standard order display report it will give you all the order types.
There are 2 ways of doing this.
1. Click on addtional selection criteria button and select the sales document type in your selection. You will only get the order types you want.
2. Run the full report and then filter out the order types you dont want and save that as a variant. You can set this as defualt variant so when your run next time the unwanted order types like Debit memos, etc will not come in the report.
Regards
Yatin Thakkar

Why it returns ERROR after I changed some Standard Reports output to XML?

Our EBS is a 11.5.10 CU2 instance.
We just upgrated the XML Publisher to 5.6.1 and did all the work described in section "Post-install Steps" of "About Oracle XML Publisher 5.6.1"(Doc ID: Note:357308.1)
Now we are do the testing.
I changed the Standard Report "Journals - General (132 Char)" output type to XML, then ran it.
It returns ERROR
Logs is as flows:
General Ledger: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLGENJRN module: Journals - General(132 Char)
Current system time is 25-AUG-2006 11:39:25
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SET_OF_BOOKS_ID='1001'
P_KIND='L'
P_POSTING_STATUS='U'
P_CURRENCY_CODE='CNY'
P_PERIOD_NAME='AUG-06'
P_PAGESIZE='132'
XML_REPORTS_XENVIRONMENT is :
/global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
Report Builder: Release 6.0.8.25.0 - Production on Fri Aug 25 11:39:26 2006
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 301650.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 25-AUG-2006 11:39:27
Anybody know why?
Thanks!

Hi,
The log file says that the RDF report actually errored out
and its not a problem in XML Publisher.
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
what you can do to debug is change the output type to text and run the report.
See, if the report runs successfully. I guess, there might be some problem with the report itself.
If the text report runs fine, change the output type to xml and run it.
Hope it helps

Line Item Not dispaying in Payment Advice standard report

Hi Experts,
I have cleared line items of a vendor by making payment through F-53 and subsequently generated the Print Form spoon request through FBZ5. But in the print, line items (cleared Items) doesn't display in Payment advice report. But for the Fiscal Year 2009 line items (Cleared item) was displaying in the Payment Advice report which is now not displaying.Since it is a standard report no changes made. So please suggest how to achieve it.
Thanks in Advance,
Arabinda

Hello,
In tr. F-53 you post a payment document,
but to print a check you need to use some check printing program.
SAP-delivered program is RFFOUS_C and it processes only
one bank line per payment document.
Please check the following general information:
The standard form (of the print program RFFOUS_C) prints the invoice
items followed by the check. If the item details overflow to the next
page, then the first check (eg cheque no. 1) will be voided and you'll
get the valid cheque on second page (eg cheque no. 2). This is standard
functionality.
Also I would request you to recheck your customising in FBZP i.e.
    -> Click on the 'Payment methods in company code' button
    -> Double click on the appropriate 'Pymt meth.'
       -> Click on the 'Pyt adv. ctrl' button
          ¦ Note to payee lines on the form /               ¦
          ¦                                                  ¦
          ¦ O restricted to                       98 Rows   ¦
          ¦ O None                                          ¦
          ¦ O as many as req                                ¦
          ¦__________________________________________________¦
- The first option will restrict the number of lines on the form to a
value from 1 to a maximum of 98.
- The second option will restrict the number of lines on the form to
zero.
- The third option option will not restrict the number of lines on the
form.
You may test in the system which among the three options will suit your
needs. There is a documentation available at the side of each button.
Also please check whether the problem happens with the standard SAP
program. You may wish to review the documentation for RFFOUS_C via
transaction SE38 -> Enter program name -> Select 'Documentation' radio
button -> Display -> scroll to 'Setting up and changing the SAPscript
forms (layout sets)'.
Also you can refer to the parameter `No form summary section' in the
variant of RFFOUS_C. By setting this indicator, you can prevent the form
summary section from being printed hence the overflow is avoided and
thus eliminates the voided check issue. Please refer to F1 Help of this
field for further information.
Also please refer to the F1 help on the indicator "Indicator: Do not
Void any Checks" in the selection screen of payment program RFFOUS_C.
I hope this helps.
BR,
Raquel

SAP standard Report-PO, delivery Note, Bill of lading,Header txt,GR/GI slip

Dear Firends,
Kindly tell me the SAP standard Report which give the details of
Po number, delivery Note, Bill of lading, Header text and GR/GI slip no.
Thanks in advance.
Regards,
william

Hi,
You can get all these fields in MB51 report by selecting the relavant fields in the selection variant. If any of the required fields are not available than you can add those in img -going tothe Inv Mgt-Reporting - Define field selection for material document list.
Dhruba

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

DUETE standard reports not returning to Sharepoint.

Similar Messages

Maybe you are looking for