Info Records Per Material Group Standard Report Not Running at All.

Hi Experts,
We had a Small problem Where while Running Info Records Per Material Group(T-code ME1W ) Standard Report the Report is not Showing any output in PRD, where else running Info Records Per Material (T-Code ME1M ) Standard Report the Output is getting Displayed.
Our System is Currently SAP EEC 6.0 & Application Package SAP_APPL is of release 604 & Level 0007, Highest Support Package is SAPKH60407.
is this Issue covered in Some OSS Note?
Thanks & Regards
Priyesh Shah

Hi,
The info-records for the materials which appears in the standard report ME1M/ME1L is different from the one which appear in ME1W.
If you try with the material groups of the ME1L or ME1M info-records it wont be displayed in ME1W.
ME1W will display only the info-records which are created @ material group level.
i.e. try to create a new info-record using ME11 without entering material, in the general data screen you have to enter the material group & other parameters.
Now once you save this info-record,same will appear in ME1W.
Hope its clear.
Thanks & Regards,

Similar Messages

Creation Info Record at Material group,Source List & Assign source to PR

Hi All,
Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
Completed at my end:
1. Creation of Info Record at Material Group level
2. Maintained Source List at Material level.
Issues/ Errors:
1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
2. Material differs from the Material from the Info Record.
Help / Information required :
1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
Can anyone please provide the soilution to the above points?
Thanks in advance for the solution.
Regards,
Pavan.

Hi Please create Contract and refer same while source list. This will help
Regs,
AD

Purchase info record for material groups

Hi all,
We have purchase info records for material groups, not material specific. When I create and activate integration model for these info records, no info record is sent to APO. Is there a way to create Transportaiton Lanes automatically in APO?
Regards,
Jenny

Hi,
In APOPurchase info record is transfered as external procurement relationship.
Generally Transportation lanes are created automatically for plant to plant transfer when you define special procurement key in MRP view of material master accordingly.
In case of T. lane for vendor, automatic generation may not work. Still you may try using correct special procurement key + material specific vendor info record..
Thanks,
Mangesh A. Kulkarni

Source determintaion with unique info record on material group

Gurus,
I am having an issue with source determination for a purch req item with item category D (Service). There is an info record on a material group (only this one). During the automatic assignment process from me57, the info rec is not selected and i don't even have a pop up displaying it. I have to go through manual assignment process select it and assign it. Any idea what the problem can be ?
For other item categories, this process works fine...
Cheers,
Olivier

Indeed my source is unique and yes i know there should be options from which to choose from as it is the case for non service items but there isn't any and that is my problem! I get the message "not possible to source all items in PR" and the only option is to go and manually retrieve info record for specific material group. Requirement here is to perform this automatically. Thanks for your help.

Info record without material (EINA-MATKL). Tax code

Good morning
We need to be able to automatically define in the Purchase Order the tax codes when we are purchasing a free text item (without material master record).
We are trying to do it by means of the info record for the vendor and material group, without the material. However the system is not able to determine this value.
Please if you can help us to determine how we can automatically determine this tax code in a purchase order based on the material group, we would appreciate it.
Thank you in advance and best regards,
Alejandra

Hi Steve
Have a query here regarding Info record without material number (using material group).
1) I understand we can create info record wihtout material number using material group . but doest it mean all the material comes under that material group and having same vendor will use single info record?
2) What is Purpose of Sort Key while creating such a info record.
3) As per my understanding for this type of info record system never update the price automatically using info record in fact for such PO we need to enter the info record number manually.? am i right? if yes then what is the purpose of creating a info record with material group if anyways we need to enter the info record manually.
4) i am creating a PO but even after entering the info record number (which i have created for the ,material group and vendor combination) system is asking me to enter the price against PB00.
regrds
Yogesh

Info record with materal group

dear all?
i created inforecord with material group with out / material,
whille iam creating po for one of the material of that material group by entering cost center/ g/l account ,
there is no net price in iteam and whille i enter the required plant it will showing the error message the material not mainted in the plant.
pls explan. where i got wrong
regadrds
ramakrishna.

Hi,
As I know info record w/o material number cannot be applied to a material even if the material groups (material group of the info record and material group of the material) are the same.
Info record without material number can be applied only to text items in your purchase order (ourchasing documents).
Regards,
Csaba

Report for spending per material group

Hi Gurus,
Is there a report that will show us the total spend per material group
Thanks
Anusha

Try LIS reports starting with MC*. For material group purchasing values you can try MC$<.
Thanks...

Purchasing Info record without material

Hi All,
How to create purchasing info record without material by Material group.
What is the t.code used .Is there any config
G.Ganesh Kumar

you can create by using the same tcode ME11 without mentioning the material number and after entering the relevant data in the screen pleasepress enter and in the next screen enter the materail group.
Do always mention the order unit as for the material group it is very necessary.
The order unit and material group are used as a checking criteria.
When you create Free Text Preq SYSTEM will suggest automatically the info record as a source of supply for the particular material group but it will not suggest automatically for the free text PO.
There you have to take the searchhelp for material groups in the relevant field in the item overview screen where material group and order unit are taken into account for the checking criteria.
Regards
Ankur

Multiple PO's per material group for same vendor in ME59 / ME59N

HI ,
We have following issue
We create PO's automatically from PR's using ME59 .
PR's are Stock Transport Requisitions for intercompany STO.
in ME59 , options active are Per Plant / Per Vendor Sub Range( Vendor sub range is active but no values maintained )
When we create a PO , then system does not consolidate all items in single PO even if Plant is same . It actually creates a different PO based on Material Group in a line item .
It groups all line items with similar material group in single PO .
What is the issue with material group .
is it not possible to have different line items with different material groups in a single PO in above scenario.
Pls. help.
Thanks ,
Prasad

Ajit ,
That is what I enquired , where do we do this assignment , i.e. Material group to PR document type
I do not know where to do this assignment .
Thanks ,
Prasad

Is it possible to create info record without material number

Hi all,
Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
Thank you for the help.

Hi,
1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
2.Info Update indicator -
Info record update
    Determines whether the prices and conditions of this purchase order ite
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
reward if helpful,
Regards,
Chetan.

Display only the last record per material in SAP query

Hi,
I have created a SAP Query using the quickviewer that is a join between 2 tables (MSEG and MKPF) that consist of material document information and date of posting.
The results are fine however I would like only the last record per material to be displayed.
Can anyone tell what do I need to add so for only the last record per material be displayed in the output.
Thanks,
Mark

Hi Mark,
May be if you use Control Level processing .........I think you will be able to get the result you want. Try displaying as Below,
LOOP AT XXXXX.
AT FIRST material.
ENDAT.
AT LAST material.
*...Display what ever you want here. It will display at end of every material.
ENDAT.
ENDLOOP.
Before using sort the table with key material in ascending.
Hope what I had to say is helpful to you.
Cheers,
Raga Suman.

Info Record without Material

Hi PS Gurus,
As I am trying to create an external activity to a network, after assigning of Info Record , am getting the error " Enter Info Record without material ", neither I created any activity nor attached any material
Awaiting for your response
Thanks in advance
Rama Rao

hi,
give the info record without material mater ,put your mouse in info record and press f4 key system will show u many tab then select tab info record for external processing and from this record select info record what u want

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

Program to update info record with material master data

I am trying to determine if there is a standard SAP program that can be run as a batch file to update the fields in the info record with the same fields that are in the material master? ie: Planned delivery time, Tolerance, purchasing group etc.

Hi,
There is no standard report or transaction that can do this.
The data from these fields in the material master is brought in as a default to the info record when it is created. beyond this point the Info record is treated as being the correct data regardless of what happens to the material master data and so no updates occur in the standard system.
It would not be difficult to build an LSMW job to copy the data from the material master to the info records and this would be the recommendation if you want to do this.
Steve B

Info Records Per Material Group Standard Report Not Running at All.

Similar Messages

Maybe you are looking for