Why it returns ERROR after I changed some Standard Reports output to XML?

Our EBS is a 11.5.10 CU2 instance.
We just upgrated the XML Publisher to 5.6.1 and did all the work described in section "Post-install Steps" of "About Oracle XML Publisher 5.6.1"(Doc ID: Note:357308.1)
Now we are do the testing.
I changed the Standard Report "Journals - General (132 Char)" output type to XML, then ran it.
It returns ERROR
Logs is as flows:
General Ledger: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
GLGENJRN module: Journals - General(132 Char)
Current system time is 25-AUG-2006 11:39:25
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SET_OF_BOOKS_ID='1001'
P_KIND='L'
P_POSTING_STATUS='U'
P_CURRENCY_CODE='CNY'
P_PERIOD_NAME='AUG-06'
P_PAGESIZE='132'
XML_REPORTS_XENVIRONMENT is :
/global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
Report Builder: Release 6.0.8.25.0 - Production on Fri Aug 25 11:39:26 2006
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 301650.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 25-AUG-2006 11:39:27
Anybody know why?
Thanks!

Hi,
The log file says that the RDF report actually errored out
and its not a problem in XML Publisher.
REP-1401: 'beforereport': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
what you can do to debug is change the output type to text and run the report.
See, if the report runs successfully. I guess, there might be some problem with the report itself.
If the text report runs fine, change the output type to xml and run it.
Hope it helps

Similar Messages

I Need some standard report

I need some standard reports regarding Purchage Data Analysis Report and Open Sales order report .
Thanks & Regards
Satish Patnaik

Hi,
Check the following links:
http://sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
http://sap-img.com/abap/sending-mail-when-the-purchase-order-is-released.htm
Regards,
Naresh

Connection error after domain changed

Hi,
in my client changed the domian controller and the exchange server, the domain name is same to the old domain name
but after the changed the SharePoint server has problem, we can't connect to the intranet site - we get error : sorry this site hasn't been shared with you
I can login to the CA and I see that my spamin is the site collection admin.
I don't know what I should do
Please help!
Thanks,
Mykie

Hi Mykie89,
Whether you used SharePoint 2013 Foundation. Please grant WSS_ADMIN_WPG full control on the folder.
Here are some similar post for your reference:
http://www.sharepointsecurity.com/sharepoint/sharepoint-development/sharepoint-2013-products-configuration-wizard-error-failed-to-create-sample-data/
http://www.adventuresinsharepoint.co.uk/index.php/2013/03/25/configuration-failed-failed-to-create-sample-data/http://social.msdn.microsoft.com/Forums/en-us/ee9fc828-6d63-43b0-9bbc-76065182b1fd/sharepoint-2013-products-configuration-wizard-error-failed-to-create-sample-data?forum=sharepointadmin
Thanks,
Wendy
Wendy Li
TechNet Community Support

Sapcar returns error "can't change date of file"

I am preparing to apply SPS12 to my ERP6.0 system.
when I run sapcar -xvf "*.?ar", I get the following error:
"can't change date of file EPS/in/CSN01120061532_0026976.ATT
invalid argument."
note: I am using the latest sapcar version 7.00 running under the local&domain admin account.
Did anyone run into this problem before?

We have the same error
processing archive /sapcd/sap/ECC6/JCE_Policy_Files/90000115.CAR...
x Changelog.txt
can't change date of file Changelog.txt
Invalid argument
How did you fix it ?
Regards,
Madhan

Changes in standard report MB5B

Hi Guys,
I have to add 2 columns in standard report MB5B:
(on selection screen i hv given the material, plant and date.)
1. Description fields of all movement types in standard report MB5B.
2. Calculation of cumulative balance at last column in standard report MB5B.
I can make a copy of this standard report. But I am unable to understand where to add the code as debugging is very difficult in standard report.
If anyone had done this same type of work please help me regarding the same <b>(where to add the code).</b>
Thanks in advance.

Hi
You should create a copy of report RM07MLBD (it's the report ran by trx MB5B).
I think you want to update the layout, this report decide the kind of output to show in routine bestaende_ausgebe (include RM07MLBD_FORM_01) and if parameter XSUM is initial the report use ALV to display the data see routine listausgabe1 (include RM07MLBD_FORM_02).
You can create an your own copy of this report and call the ALV function with the parameters you need.
After create an Z-TRANSACTION (ZMB5B) to run your Z-program.
Reward points if it helps..
Regards,
Omkar.

Script Error after making changes

First, I am not a website designer. I own a website and have
been making minor (text) changes using Contribute since I didn't
need to know html. I started a couple of years ago just using the
trial and never had any problems with it, but about a month ago
bought it...CS3.
After sitting down and making some changes, I published and
then got:
Script Error
Line: 17
Char: 1
Error: Object required
Code: 0
URL;
http://www.dirty-dog.com/contact/
I've looked at the source code, found line 17, but have no
idea what I'm supposed to do. I think this is an easy fix, right?
Can someone explain in "plain english" what I need to do?
Also, one day I somehow fixed it...just by moving stuff
around on the page. I also made some changes to other pages,
thought they were published (looked at all of them), but when I
went back yesterday, all the changes were gone?!? How is that
possible??? I'm going to try to paste the code here....

This is the contents of my log4j.xml, its under WEB-INF/lib
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">

<appender name="sout" class="org.apache.log4j.ConsoleAppender">
    
    <layout class="org.apache.log4j.PatternLayout">
      <param name="ConversionPattern" value="%d [%c] %p - %m%n"/>
    </layout>
</appender>
<root>
    
    <priority value="off"/>
    <appender-ref ref="sout"/>
</root>
</log4j:configuration>

System Folder errors after I changed all permissions on HD to read & write

Hi,
Two things may have caused probs on my new 2010 iMac (Snow Leopard), and Applecare is shut so I would really appreciate some help as I have urgent work.
1) INCORRECT PERMISSIONS
I have been stupid. I clicked on Macintosh HD and changed all permissions to read & write because I wanted to be sure I could open and edit all documents on other computers.
I ran Disk Utility Repair Permissions from the install disc, but I am still getting system error messages, and my HP printer won't work.
The first message, in Repair Permissions, said: Warning: SUID file System/Library/Cores has been modified and will not be repaired. I have read a support doc on this which says no need to worry but I don't like it and would like to fix this.
More importantly, my HP printer won't work, displays error beside the document in print dialogue box.
Deleting the printer and readding it didn't work, so I downloaded new drivers and tried to install them, which is when I got the second system error message: System extension System/Library/Extensions/BJUSBLoad.kext was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for an update.
I checked the permissions on the file and they were still wrong despite Repair Permissions, allowing everyone to read & write. So I have now clicked on the entire System folder and changed the permissions to: System read & write, admin read only, everyone read only.
Will this fix it or do I need to do something else, such as check ownership, to make sure all permissions on the computer are now correct?
2) MEMORY STICK SHUT DOWN MY IMAC
Additionally (though I don't think this had anything to do with my problems), I inserted a Sandisk USB memory stick the other day and it immediately shut down the computer. When I inserted it into my Macbook it initially rejected it and gave me a message saying the device wanted too much power so it had ejected it to prevent damage to my computer. When I tried again it was OK. I totally reformatted the stick in case there was something harmful on it, but should I now bin the stick as faulty? Scared to use it again.
3) IS IT BEST TO REINSTALL ENTIRE SOFTWARE?
If I do a reinstall of all the software from the install disc, will it wipe out all my data, such as Mail, documents, bookmarks and other apps?
I would back-up, but if I try and back up files on my external drive it will automatically do a Time Machine back-up and I don't want to do that in case it backs-up all the corrupted files. Otherwise, I wouldn't mind starting again just to be sure all is well.
Expert advice would be very much appreciated.
Thank you
Sarah

Oh, silly really. I was in a hurry and working on docs that I needed to take to the office and open on another computer there.
But when I checked the permissions on the doc it said I could read & write but everyone else was read only.
I thought if I opened it on another machine I'd be stuck with read only access and not be able to work on there. I think I couldn't change it, so I thought to avoid any future problems like that I would change everything on machine!
Yikes. Won't do that again
Sarah

Query syntax error after multiprovider change

Hi everyone,
I removed key figures from a multicube, changed a query on top afterwards and saved it. The key figures are no longer in the key figure list of the query in the Query designer, and are no longer used in any place within the query.
Now, I'm getting a syntax error on query execution, since the compiled query still contains a reference to the old key figures. Regeneration via RSRT or saving under a new name doesn't work, and to delete the generated report I need a developer key.
Any ideas?
Regards,
Tilman

Hi Shashank,
thanks for your response.
I did try the "check query" button, it didn't return an error. When executing the query via rsrt, I get a dump due to "Syntax error in program GP48VM7K0MSF08DRO2382A2PSTI ". The program still contains data type references to the removed infoobjects. When checking the program via SE38, you get just that syntax error.
I'm looking for a way to clean these things up. Even when creating a new query on the aggregation level (I was talking about a multiprovider earlier, which is located underneath), the error pops up. I activated all the objects along the way, with no effect.
Regards,
Tilman

To more specific class: all return error after upgrade from LV2011 to 2012

I have working projects/executables built in labview 2011. When loading the exact same project in 2012 EVERY 'to more specific class' returns an error.
For example, making a generic control reference into a 'numeric'.
Redoing the exact same action makes no difference. What has changed in LV2012?

Can you post an example VI containing such code? Please post the original 2011 code.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Navigator display returns error after import

I am able to run the export/import successfully (while attempting to transfer an entire application from one instance to another).
However, when I browse through the Navigator on the target instance, I get this error:
An unexpected error ORA-01422: exact fetch returns more than requested number of rows occurred when executing default_action action of the APP datasource. (WWC-38130)
Any ideas?
Thanks.

I am sure, It created another provider, with same name.
Easiest solution for this problem would be restore backup, remove providers from destination which you are planning to import from source.
I know this is not the solution anybody is looking for, but after spending good time to look for tables where the providers are stored & other referencing entries in different tables.
It will take you for ride. If you want to go for one.
Vikas

[bug 10.1.3 EA1 Database Diagram] edit error after schema change

If you change the schema of a table definition in a Database Diagram and then attempt to edit the table definition, you get the following error:
Editing is disabled.
Error opening <table_name> - duplicate object definitions exist on the database path.
The current node is: <path to .table file in old schema folder>
Operations are diabled on all but the first object found on the database path: <path to .table file in new schema folder>
Workaround is to close JDeveloper and re-open. Table definitions are then editable.
Johnny Lee

Thanks for reporting this Johnny.
I was able to reproduce the problem in the EA1 release but it is working correctly in the latest build.
Thanks again,
Lisa
JDev QA

OEM error after host change

Hi
10.2.0.4, win 2008 server,
I recently moved my database from one server to another with a diff hostname.
It worked successfully.
However when i open EM console, it shows the hostname of the previous server.
I searched for a solution and found a command
emca -config dbcontrol db -repos recreate
it executed successfully and showed the correct domain.
But EM still gives the same error.
java.lang.Exception: UnknownHostException sending request :: (my-old-hostname)
I only moved the oradata folder.
listener.ora and tnsnames.ora shows the right hostname.
Database is up and running.
Does changing the IP address affect OEM or only hostname?
Please suggest

Because of 'Administrator' I guess you are on windows (by the way it's always a good idea to include OS information, that makes many things easier). Make sure the OS user has the 'logon as a batch job' privilege:
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/postcfg.htm#BABFAEIG
Werner

"Access Denied" Error After Server Change

I have a number of hosting clients that use Contribute. Since
I upgraded my hosting server, they are unable to connect - or more
accurately, they can connect, but if they try to edit a page they
get a "Access Denied. The file may not exist, or there may be a
permission problem." error. This did not occur during my last
server upgrade - all Contribute connections worked just fine.
All settings such as username, password and server addresses
remain the same including the FTP server settings. I can create a
new connection from scratch, but anyone with a key generated by
their web developer is out of luck. I can send out these new keys
I've created and they seem to work just fine.
What could possibly cause this error, and is there any other
way to correct the issue beyond regenerating keys and sending them
to everybody?

Do u mean Contrinute? Captivate is not being used. It is not
possible to rename the file because these files are in production
and it would take a lot of work to go through renaming files for a
whole website.

Virtual servers tab returns error after using jdk 1.4

Hi, I configured Iplanet 6.0SP5 to use SDK 1.4.1_02 and all apears to work, EXCEPT the "virtual servers" tab. When clicking this tab I receive "page cannot be displayed" errors. Additionally, the logfile reports the following (see below). Any ideas on what's going on here ?
Thank you,
Richard
[09/Jul/2003:15:45:04] failure ( 3086): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.StackOverflowError
at java.util.zip.ZipFile.getEntry(ZipFile.java:147)
at java.util.jar.JarFile.getEntry(JarFile.java:184)
at java.util.jar.JarFile.getJarEntry(JarFile.java:171)
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:669)
at sun.misc.URLClassPath.getResource(URLClassPath.java:156)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at java.lang.ClassLoader.loadClass(ClassLoader.java:292)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:250)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:250)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:250)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.findSystemClass(ClassLoader.java:666)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:152)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:108)
at com.iplanet.server.http.servlet.WServletEntity.loadAndInitServlet(WServletEntity.java:57)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1041)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)

For newer JDK versions, you will need to increase the StackSize
parameter in magnus.conf file. This is documented in the
release notes:
http://docs.sun.com/source/816-6434-10/rn60sp5.html#1027907
Thanks
Manish

A report that uses tablix returns error when trying to deploy to Report Server 2005

We have some reports that have been built using tablixes, and tested in a 2008 Report Server. When trying to deploy to Report Server 2005 (don't ask why) we get an error saying
The report definition is not valid. Details: The element 'ReportItems' in namespace 'XXXXXX' has invalid child element 'Tablix'
So.. what is the issue? I guess 2005 does not support tablixes.. And we cannot upgrade the server version. So the real question is.. is there a workaround for this to avoid having to remake those reports for 2005??
Thanks!
Juan Pablo Realini .Net Developer in developement, musician, Star Wars fan, married, father of 2 1/2

Hi Shei Pi,
Unfortunately Microsoft provide upgrade option only, not downgrade .
SSRS 2005 report can be seen in 2008.. but 2008 report cant seen in 2005.
One guy created the utility which is paid, to convert the report from 2008 version to 2005.
You can see similar thread in MSDN here, you can find the paid utility link also for this issue.
https://social.msdn.microsoft.com/forums/sqlserver/en-US/bc5fbe11-531a-4a9d-861f-24625a9f4599/converting-rdl-file-of-ssrs-2008-to-ssrs-2005
Thanks
Prasad

Why it returns ERROR after I changed some Standard Reports output to XML?

Similar Messages

Maybe you are looking for