Dump a Message object to file, rebuild later - Possible or not?

Has someone used the MimeMessage class to serialized,
for saving to disk and then load it back to a Message object again?
Thanks

no not possible because niether MimeMessage nor any its super class is not implementing Serializable interface

Similar Messages

Dump a Message object to file, rebuild later- Possible or no?

Hello all-
I need to pass along a Message object (a mail object) from one component (an Enterprise JavaBean) to another (Also an EJB). Thing is, I want to put it in an XML file- in other words- is it possible to dump a message object as a raw text file, then rebuild it at the destination?
Now, I guess the problem here is that the Message-class isn't serializable. Can anyone think of any clever workarounds to this??
-ThomasN, frustrated

I don't think you can do it with a message class,
but if what you're looking for is for the raw text of the email you can use the MimeMessage class and use the
message.writeTo(outputStream) function to put the
source of the email into a particular stream

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

Unless you deliberately downgraded iTunes this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Error message: "the following files were imported but could not be renamed"

Trying to import photos and keep getting error "the following files were imported but could not be renamed." Any help would be appreciated...using Lightroom 3 still ( I know I know) and importing into lightroom with a backup copy to computer harddrive.
Message title was edited by: Brett N

Peter I am also experiencing the same error message. Here is my situation:
I am using Lightroom 4.
I have duplicated images across multiple harddrives.
I am trying to import these using 2 seperate 2 terrabyte hard drives ( 1 for lightrooom the other as my image backup drive).
I am using keywords and embedding the keyword into the new backup file name. Hopefully provide some organization.
I am using the MOVE option in my import process.
Have he images that were not renamed moved to the new backup drive? Are they they under the original file name?
I want to end up with a common lightroom catalog and single backup file structure as my photo repository.
What am I doing to trigger the above message and what suggestions might you have with regards to my lightroom organization approach?
Any insight and recommendations to my situation would be greatly appreciated.. Thanks, Jay

On lightroom 5.6 (mac) message says "the file named _dsc0189.Nef could not be moved to trash folder. what do I do besides manually search and move hundreds of files?

message button pops up saying The file named _dsc0189.NEF could not be moved to the trash folder.
I have hundreds if not a couple thousand images that I will be wanting to delete. Any suggestions besides manually
search for these files and dragging them to the trash.
Mac
I have tried restarting the computer and lightroom

Same issue here!

Messages with zip files or multiple attachments are not being delivered

Has anyone else come across this? I've discovered that files sent from my .mac account are not being delivered if they contain zip files or multiple attachment. A single .docx file goes through, but multiple doc files or a single zip file do not.
I get no error message, and neither does the recipient. The message sends on my end but simply doesn't show up on their end.
Any thoughts on what might be causing this?

Another follow-up: Now, for whatever reason, even attachments of a single document aren't going through.
Again, I'm receiving no error message, and it shows up in my sent folder. It just never makes it to the recipient.
This is very frustrating, and makes my iCloud mail account all but useless. Does anyone have any idea at all what might be happening?

"license file for this version could not be found" message when trying to install latest version of Firefox

I keep trying to install Firefox 3.6.10, and it seems to work, but then when it comes time to accept the user agreement, that option is grayed out and I can only go back. In the Software License Agreement box is the following message: "The license file for this version could not be found. Please visit Firefox homepage for more information."

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. 
Don't remove personal data when uninstalling.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.1 r82
# Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

Send message with jar file

hello,
i'm want to send message using jar file, it is possible?
for example : java -jar post.jar
thnx.

For sure "java -jar post.jar" works as any other your desktop application.
So you can do everything from your java code, packed into post.jar

The file is damaged and could not be repaired.

Hi, I'm debugging an Adobe Drive CC connector and seeking advice on the following problem:
After I check-in an Illustrator file, the local copy becomes corrupt.
If I make a change and try to save it, I receive a message stating "The file is damaged and could not be repaired." If I close the file instead, I can't re-open it (same error message).
However, if I Empty Cache in the Adobe Drive Settings that fixes everything and I'm able to open/save the file without any error. (When I check it in, the same problem repeats itself until I empty cache again).
Where does this message come from and what conditions can trigger it? It's difficult to debug without Adobe's sourcecode to step through the event, but I wonder if it has to do with Etag data?
I've confirmed the stream data downloaded by the open & read handlers is not actually corrupt (by setting a breakpoint after the tempfile is written and checking it's md5).
The problem occurs after every checkin of Illustrator files, but never with Photoshop files.
Any advice? Thanks

I wish I had an answer, but I at least wanted to post in solidaridity and bump this thread. I've been experimenting with Adobe Drive CC (5.0.1.28) and am also suffering from the "file is damaged" issue.
I am using the CMIS connector and after almost every check in or out the file becomes corrupt -- but only in the Drive cache. If I clear the Adobe Drive cache the file is perfectly fine. I have watched the CMIS traffic in Wireshark and it appears to me that this error is entirely within Drive: it does not get a new copy of the file that's corrupted en route, it just corrupts its own copy in the cache.
I experience this with all file types.
Out of frustration I tried Alfresco 4.2.e, which is supposedly the software Adobe worked with to "polish" the CMIS connector, and the problem is entirely different. Every check in failes with "The operation could no be completed because of an unexpected error. Error Code: -1" and a RemoteIOException in the Drive log.
Drive then announces the file "has changed since I opened it, and it will be updated to the newest version" -- which DOES bring new bytes over the wire and avoids the corrupted local cache. Is that somehow the answer the Alfresco has discovered, to break the transaction and force Drive to refresh the file?
Please, anyone, chime in you've experienced either of these issues. I have yet to see a successful use case for Adobe Drive over CMIS, but surely someone is using this product?
Thanks.

Mapping Error - Dump source message to file adapter comm channel

Hi
Does anyone know of a way to dump the source message to a file adapter comm channel if - and only if - the message fails during mapping. For example, we receive a message from a trading partner that lacks an element that is mandatory during the mapping. When the mapping fails, the source message is sent - as is - to a file adapter comm channel.
I don't need anything more than the source message i.e. no need for any errors etc... to be included.
The kicker.. I would like to do this without using BPM if at all possible.
Any ideas greatly appreciated. Thx, Duncan

Hey Ram,
Go to Integration Directory and open the Receiver Determination for your scenario.
Check the configured receiver services. They are in a table-like area in the middle of the screen.
In this table of configured receiver services for that particular Sender Service/Interface, you should have the system that normally receives that message (your ERP or any other application system) and the service that contains the receiver file comm channel that will receive the message in case of error.
Check help.sap.com for help on condition editor on receiver determinations.
Now, the issue. You can only check whether a field exists, you can't check whether it doesn't exist (There's only a "EXIST" operator, and no negative operator). Thus, you can only do the following: always send messages to File, but you can avoid messages that dont have field from being sent to App System. Yeah, that sucks...
But don't fear, young padawan! There is a possible workaround. =D
In your message mapping, do the following for that particular field:
If field exists (check with Exist and IF standard functions) just bypass the field. Else, map the field with an impossible value (like string "$CREATED$"). Then, in your receiver determination, you will do the following conditions:
for App System: If field =/= $CREATED$
for File Receiver: If field = $CREATED$
Now, if the field doesnt exist, it will have value $CREATED$, thus the message will be sent to File and not to App System. If the field exists, the message will be sent to App and not to File.
Try that out.
Regards,
Henrique.

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

I am getting the following error message when i download CS6 Design Standard 'The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please down

i am trying to download CS6 design standard. but it wont work. the second part of the download comes up with the following message "The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please download all parts."
Does anyone know what to do?

Do as it says: Put your downloaded 7z file and the *.exe in a proper folder, not just dump it onto your desktop or whatever.
Mylenium

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!

In AOL email, checking individual messages in the regular system results in this error message: There was an error loading the message. Please try again later.

In accessing AOL email through the full version, I can navigate within my account (old mail, new mail, spam, etc.) fine, but when I try to open an individual email, I get this error message: "There was an error loading the message. Please try again later."
This is identical to a problem someone else was describing in another thread....unfortunately, nothing you suggested to him seemed to be working. I WAS tricked into opening a file attached to an email immediately before this started, so I think its a virus or something. ANYWAY....I AM able to open the messages when I use AOL's basic version. Initially, the problem seemed only to be in Firefox, but I've tried with Internet Explorer now also, and its the same thing, and the basic version is accessible while the full version is still blocked.
On both browsers, following the error message, I can't even click on the individual messages to TRY to open a different one, and there are some not-quite-right boxes and x's and things that appear on the screen that don't belong.
PLEASE tell me you can't make this go away....I've already tried uninstalling and reinstalling Firefox....that didn't work. I've also fun McAffee, and that didn't change anything.

You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Error messages while executing File - RFC - File.

Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.

Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish

Dump a Message object to file, rebuild later - Possible or not?

Similar Messages

Maybe you are looking for