Dump error when doing ODS activation

Hi,
  When doing to the ODS activation, out of 500 data packets 1 data packet is not updated its highlighting Red traffic light. After that i selected that incorrect data packet i given manual update sytem is gives ABAP runtime errror MESSAGE_TYPE_X. i checked in SM21 as well as ST22 also it was MESSAGE_TYPE_X.
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 143857 ccdbwprd BIADMIN " generated                             
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 144123 ccdbwprd BIADMIN " generated                             
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 144435 ccdbwprd BIADMIN " generated                             
Transaction Canceled BT 510 ( )                                                      
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 150322 ccdbwprd BIADMIN " generated                             
Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150322ccdbwprd BIADMIN 0051 )   
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 150639 ccdbwprd BIADMIN " generated                             
Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20090413150639ccdbwprd BIADMIN 0051 )   
Run-time error "MESSAGE_TYPE_X" occurred                                             
> Short dump "090413 150837 ccdbwprd BIADMIN " generated                             
please give ur suggestion to solve this issue.
Thanks & Regards
Khamesh

please verify the note 852443

Similar Messages

  • Error when transporting ODS Object

    Hi All,
    I got the following error when transporting ODS object.
    "The creation of the export DataSource failed"
    "RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
    "Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
    Maybe somebody can help me.
    Thanks a lot and appreciate that,
    -Martin-

    hi Martin,
    check oss note 597326 - Activating ODS: Error when creating the export DataSource
    Symptom
    When you activate or transport ODS objects, the following errors appear in the log:
    "The creation of the export DataSource failed". Message number RSBM 035
    "Error &1 in function module &2". Message number RSBM 006
    "<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
    "Error when activating the ODS object &1". Message number RSDODSO 168
    Other terms
    RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
    Reason and Prerequisites
    A characteristic involved is active but it is using new or inactive attributes.
    Characteristics involved are all characteristics used in the ODS object.
    Solution
    Check all characteristics involved as described in the following:
    Check the Compounding and Attributes tabs in the characteristics maintenance.
    All characteristics here must be active. This is displayed by a green icon.
    If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
    After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

  • Error when updating ODS

    Hi,
      We got an error when updating ODS.
    The error message is "RSDRO_UPDATE_ODS".
    Its fetching all the records and its giving an error "when saving the aggregation information for ODS".
    We rectified the error.
    But how to fix it permenantly, what might be the reason for this error.
    Thanks in advance!!

    hI,
    I executed the program and there are no errors in the program and the program is active, but still we are often getting the error when updating the data in ODS.
    Please suggest me what might be the problem behind this....
    Thnaks in advance!!

  • Short dump error when using count(*)

    Hi Experts
    I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
    I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
    select count(*) from ZINT_TABLE
    select count(*) from ZINT_MSGS
       select * from zint_data
                 nto table izint_d2 . "PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.**
    report z_eslp_command_records.
    data: cnt type i.
    data: cnt2 type i.
    data: cnt3 type i.
    data: cnt4 type i.
    DATA:
         w_date1 like sy-datum .
    DATA:
         w_date2 like sy-datum.
    data: izint_msgs type table of zint_msgs.
    data: izint_data type table of zint_data.
    data: izint_m2 type table of zint_msgs.
    data: izint_d2 type table of zint_data.
    INITIALIZATION.
    w_date1 = sy-datum -  30.
    w_date2 = sy-datum -  30.
    select * from zint_data
                 into table izint_data PACKAGE SIZE 3000
                 where STATUS = 'OK' AND CREATED_ON <= w_date1.   " ZERO
    endselect.
    select * from zint_msgs
                 into table izint_msgs  PACKAGE SIZE 3000
                  where  CREATED_ON <= w_date2.              " ZERO
    endselect.
      select * from zint_data
                 into table izint_d2 PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.
    select * from zint_msgs
                 into table izint_m2 PACKAGE SIZE 20000
      where CREATED_ON >= w_date2.                            " VALUE
      endselect.
    select * from zint_data
                into table izint_data2
    where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
      select * from zint_msgs
                into table izint_msgs2
    where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
    sort izint_data by created_on ascending.
    sort izint_msgs by created_on ascending.
    sort izint_d2 by created_on ascending.
    sort izint_m2 by created_on ascending.
    describe table izint_data lines cnt.
    describe table izint_msgs lines cnt2.
    describe table izint_d2 lines cnt3.
    describe table izint_m2 lines cnt4.
    write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
    skip.
    write:/ '1. Records counted in ZINT_DATA   <=current date - 30                   :' color 2,                        cnt color 4.
    write:/ '2. Records available in ZINT_DATA >=current date - 30                   'color 4,                   cnt3 color 4 .
    skip.
    write:/ '2. Records counted in ZINT_MSGS   <=current date - 30                   :' color 2                 ,                      cnt2 color 4.
    write:/ '4. Records available in ZINT_MSGS >=current date - 30                   'color 4  ,            cnt4 color 4 .
    TOP-OF-PAGE.
    WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED  '.
    WRITE:/50(40) ' Command Interface Data' CENTERED .
      WRITE:/50(40) '----
    ' CENTERED .
      FORMAT INTENSIFIED ON.
      SKIP.
      "FORMAT COLOR COL_HEADING.
      ULINE.
      FORMAT COLOR 1.
    END-OF-PAGE.

    Answer

  • Short dump error when extracting delta records from R/3

    I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
    Below is the error message
    Kindly do the needful ASAP.
    Job started
    Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0ISCM_PAYMENT_01
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled

    Hi,
    I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
    Another option is to look at OSS notes, because the error is giving you a standard extractor.
    Greetings,

  • TS1702 I got this error when doing a restore

    I got this error when doing a restore and the restrictions were turned on .  I disabled restrictions and the restore was able to complete.

    The error in itunes had a link to http://support.apple.com/kb/TS1702.  I placed this message here for anyone that might navigate to the same message and would hopefully find this.  Yes turning off restrictions allowed the restore to complete and everyone is now happy.

  • HT1657 If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start?  Do I have 48 hours from the download date or when I first watch the movie?

    If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start?  Do I have 48 hours from the download date or when I first watch the movie?

    You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.

  • Dump error when posting through F-02.

    Greetings everyone,
    When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
    From my primary analysis one standard program is calling and that program has syntax error.
    When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
    Generated Program is Module pool program :GBTV6FI0
    Description of that program is below
    Generated by report RGUGBR01.
    Generated code used by validations substitutions and rules.
    !! Do not manually change or transport !!
    For reference please find the dump below
        Error in the ABAP Application Program
        The current ABAP program "SAPLGBL5" had to be terminated because
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "GBTV6FI0 " in in
         " in
        line 519:
        "FORM "SEND_CMPLX_DATA_015" does not exist"
        The include has been created and last changed by:
        Created by: "DDIC "
        Last changed by: "****"
        Error in the ABAP Application Program
        The current ABAP program "SAPLGBL5" had to be terminated because
        come across a statement that unfortunately cannot be executed.
    Can any one please suggest me how to resolve this issue.
    Thanks in Advance.

    This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
    Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
    I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
    And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem.  :-)

  • Dump error when clicked on text elements in SAP Script window

    Hi All,
    There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
    Category               ABAP Programming Error
    Runtime Errors         DATA_LENGTH_TOO_LARGE
    Except.                CX_SY_RANGE_OUT_OF_BOUNDS
    ABAP Program           SAPLSTXK
    Application Component  BC-SRV-SCR
    Date and Time          30.04.2014 20:00:08
    Short text
         Invalid partial field access: Length is too large
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
          caught in
         procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
        The reason for the exception is:
        In the executed program "SAPLSTXK", the system attempted to access the field
        "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
        However, a partial field access with a length specification that is
        larger than the field length is not allowed.
    How to correct the error
        Reduce the length used to access the field.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
        "SAPLSTXK" or "LSTXKFRN"
        "TOKEN_COMMENT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
    2937 * todo empty comment ???
    2938       if g_tm_open    eq true or     " Section
    2939          g_tm_b_close eq true.
    2940         l_token = '\chcbpat0'.
    2941         l_len = strlen( l_token ).
    2942         token_control = true.
    2943         assign l_token to <itf1>.
    2944         perform put_itf1_new using l_len.
    2945         perform token_line_begin changing l_next_token.
    2946       else.                          " without section
    2947         concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
    2948         l_len = strlen( l_token ).
    2949         token_control = true.
    2950         assign l_token to <itf1>.
    2951         perform put_itf1_new using l_len.
    2952       endif.
    2953     elseif l_next_token-code eq ')L'.         " \par
    2954       l_token = '\par'.
    2955       l_len = strlen( l_token ).
    2956       token_control = true.
    2957       assign l_token to <itf1>.
    2958       perform put_itf1_new using l_len.
    2959     elseif l_next_token-code eq '(C' or       " \par + format
    2960            l_next_token-code eq ')C' or
    2961            l_next_token-code eq '(&' or
    2962            l_next_token-code eq 'TA' or
    2963            l_next_token-code eq 'SC' or
    2964            l_next_token-code eq 'ST'.
    2965       concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
    2966       l_len = strlen( l_token ).
    >>>>>       itf_token(l_len) = l_token.
    2968       token_control = true.
    2969       assign l_token to <itf1>.
    2970       perform put_itf1_new using l_len.
    2971     endif.
    2972
    2973 * Step 7: (L to disarm
    2974   if g_compose eq true and
    2975      l_next_token-code eq '(L'.
    2976     perform read_next_itf_token(rstxscan) using p_token.
    2977   endif.
    2978
    2979 ENDFORM.                    " token_comment
    2980 *&---------------------------------------------------------------------*
    2981 *&      Form  create_lang_info
    2982 *&---------------------------------------------------------------------*
    2983 *       add default language to rtf
    2984 *----------------------------------------------------------------------*
    2985 *      -->P_HEADER  text
    2986 *      <--P_RESULT  text
    How do I open the text elements? I need to pass the variable inside SAP Script.
    Please Help. The requirement is pending from very long. Not able to rectify this issue.
    Regards,
    Rekha

    Hi,
    There is a SAP Note about this problem
    566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
    Correction Instructions
    Correction Instructions
    Software Component
    Valid from
    Valid to
    Number
    SAP_BASIS
    46B
    46D
    473267
    SAP_BASIS
    610
    620
    473185
    Support Packages & Patches
    Support Packages
    Software Component
    Release
    Support Package
    SAP_BASIS
    46B
    SAPKB46B48
    46C
    SAPKB46C39
    46D
    SAPKB46D28
    610
    SAPKB61027
    620
    SAPKB62014
    Regards
    Miguel

  • Error when doing importing with impdp

    Hi,
    I tried to do export then import the schema from and to same schema. However, when doing export with expdp everything was okay.
    Problem begins when I tried to do importing by using impdp. I also tried to drop the current schema and created the new one but it still doesn't work.
    If I didn't drop the current schema, it logs looks like this
    Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
    ORA-31684: Object type SEQUENCE:"HSS"."LCM-MIGRATION_ID-SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."WKS_IDENTITY_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_RESOURCE_SEQ" already exists
    ORA-31684: Object type SEQUENCE:"HSS"."ESS_FAILOVER_LEASE_OWNER_SEQ" already exists
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39151: Table "HSS"."HSS_COMPONENT" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_LINKS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_PROPERTY_VALUES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TIERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."ESS_CLUSTER_SERVER_MAPPING" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."HSS_COMPONENT_TYPES" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_IDENTITY" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_GROUP_MEMBERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    ORA-39151: Table "HSS"."CSS_USERS" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
    Job "HSS"."SYS_IMPORT_FULL_01" completed with 95 error(s) at 08:47:21
    And then this is the log when doing importing, I only highlighted the necessary part which I think related with my problem
    Starting "HYPSS"."SYS_IMPORT_FULL_01": HYPSS/******** TRANSFORM=oid:n:type directory=test_dir logfile=imptest.log dumpfile=HYPSS.dmp
    Processing object type SCHEMA_EXPORT/USER
    ORA-31684: Object type USER:"HYPSS" already exists
    . . imported "HYPSS"."CSS_ROLE_LOCALES" 1.630 MB 6358 rows
    . . imported "HYPSS"."HSS_COMPONENT_FILES" 601.5 KB 33 rows
    . . imported "HYPSS"."HSS_COMPONENT_PROPERTY_VALUES" 130.7 KB 1657 rows
    . . imported "HYPSS"."CES_APPS" 10.54 KB 1 rows
    etc....
    Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39083: Object type INDEX_STATISTICS failed to create with error:
    ORA-01403: no data found
    ORA-01403: no data found
    Failing sql is:
    DECLARE I_N VARCHAR2(60); I_O VARCHAR2(60); c DBMS_METADATA.T_VAR_COLL; df varchar2(21) := 'YYYY-MM-DD:HH24:MI:SS'; BEGIN DELETE FROM "SYS"."IMPDP_STATS"; c(1) := 'TRIGGER_NAME'; c(2) := 'TRIGGER_GROUP'; DBMS_METADATA.GET_STAT_INDNAME('HYPSS','QRTZ_TRIGGERS',c,2,i_o,i_n); INSERT INTO "SYS"."IMPDP_STATS" (type,version,flags,c1,c2,c3,c5,n1,n2,n3,n4,n5,n6,n7,n8,n
    Processing object type SCHEMA_EXPORT/TABLE/COMMENT
    The source schema is on USERS tablespace (default). The destination schema I tried to put on the same tablespace but it doesn't work. However when I changed the destination tablespace, it also doesn't work.
    Anybody got the idea why this occurs? Thanks.

    got error like this
    ORA-39152: Table "HSS"."CSS_GROUP_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_USERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_DELEGATED_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_MEMBERS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_ROLE_LOCALES" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-39152: Table "HSS"."CSS_GROUPS" exists. Data will be appended to existing table but all dependent metadata will be skipped due to table_exists_action of append
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-00001: unique constraint (HSS.COMPONENT_LINKS_PK_IND) violated
    ORA-31693: Table data object "HSS"."HSS_COMPONENT_TYPES" failed to load/unload and is being skipped due to error:
    ORA-00001: unique constraint (HSS.COMPONENT_TYPES_PK_IND) violated
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists
    ORA-39111: Dependent object type COMMENT skipped, base object type VIEW:"HSS"."VW_APPLICATIONS" already exists

  • Runtime Error when doing a Network migration

    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

    Actually it also happens when I don't do a network migration. I choose -
    create - and it errored when I choose Current User.
    >>> Kevin VanSchepen<[email protected]> 3/23/2006 9:37 AM >>>
    I get a Visual C++ Runtime error on DesktopDNA.exe (abnormal program
    termination)
    - It happens when I am doing a network migration (with and without
    crossover
    connection)
    - The moment I choose Current User or when I choose next after choosing the
    user in Multiple Users
    - It works on other machines, could it be something to do with the user
    account I am trying to migrate?
    Kevin VanSchepen

  • ABAP Runtime error when doing component assignment in routing creation.

    Hi All,
    I have a problem in component assignment while creating routing (CA01) by using Copy from function. We are creating a Sale order specific routing for a finished material by copying it from the same material. The Transaction runs very slow and when it goes to component assignment it is taking more than 2 hrs and going to dump.
    This finished material is having  very high no. of compoents in its BOM. (14000). Pls suggest why this is happening.
    Regds
    Mahesh

    Hi,
    You can analysis the Dump error using t-code ST22 with the help of your ABAP consultant. He will be able to explain you why the dump you are getting.
    Regards,
    V. Suresh

  • Error when doing material transfer

    hi expert,
    when doing material transfer from plant 0001 to plant 0002, error pops up :
    "maintain vendor for the customer 1234 attached to supplying plant 1234"..
    what should i do??
    thanks

    Dear,
            Use XD02( Customer Master Record )  and GOTO -- Genera Data TAB and select Control Tab and under control tab u will find in top VENDOR field.
           and for VENDOR Master Record use XK02 and select Control TAB under which at top u will find CUSTOMER FIELD.,
    Regards
    AJIT K SINGH
    HAPPY TO HELP U
    Edited by: AJIT K SINGH on Dec 1, 2009 2:01 PM
    Edited by: AJIT K SINGH on Dec 1, 2009 5:04 PM

  • Dump Error when I open 'Member access Profile' in Admin client

    Hi,
    We have recently performed DB-Refresh.
    In Admin client: when try to create a user and assign the user to team it throws the error: "Object Reference not set to an instance of an object".
    There are no 'Member Access Profiles' and when we click on 'Member access Profiles' it throws a dump error.
    We have the issue with APPSHELL as well. I've deleted and re-created the APPSHELL but still same issue.
    Please let me know how to resolve this issue.
    Thanks

    Whenever  you  see dumps  on  accessing    the   security  profiles/  cannot  add/modify  users..
    it  is  usually  a  mismatch with the  BPC  Server,  BPC  CLient (on  your  machine)  with .NET  server.
    Please check  the  BPC  server version, and  go  to   the  installation  doc  for  that  SP,  you  will  find  the  relevant  client  and .NET  versions  to  go  with  the  Server  version..
    Hope  this  helps..

  • RFC Communication error when doing initial indexing

    Hello Everyone,
    I have a quick question, when doing the initial index rollup for a BIA index the job is failing with RFC communication error.
    We currently have the setting related to " TREXRfcServer threads" set to "Automatic Changes" in order to avoid the RFC Communication errors when loading big loads in BI system.
    We currently are on Revision 49.
    I also have referred to OSS Note 1138603.
    The issue is when I am rolling up the BIA Index the rollup job is failing with RFC Communication errors.
    The Global parameters within BIA are:
    BATCHPARA - 2
    NUMPROC - 5
    PKGSIZE - 10000000
    SUBPKGSIZE - 20000
    We have two app servers with 52 Dialog processes and 25 Background processes.
    Any help would be really appreciated.
    Thanks
    Dharma.

    Removing references to systems and ports
    Issue:
    When the initial indexing is being carried out for an InfoCube to
    create the BIA Index and there is more than one application server in
    the system the job is failing with the http error.
    Hello Everyone,
    Thanks for the input, after the automatic changes was configured for concurrent requests the error is different right now.
    The error message is,
    "Remote communication failure with partner http://<Removed>:<removed>/indexCellTable"
    Overview/Background:
    When the indexing job is triggered as a background job the failure happens when the S table index is being filled.
    In our system where we are trying to do the stress testing we currently have two app servers and one central instance.
    When I limit the RFCGROUP in RSDDTREXADMIN table to one App server in terms of logon group the job finishes fine.
    Whereas, when I do not limit the RFCGROUP and all app servers are open for access the background job finishes with the error message
    Remote communication failure with partner http://<Removed>:<removed>/indexCellTable.
    We have looked into the OSS Note 1102652 and our BASIS team confirmed that they were able to ping from BI App servers into BIA blades and vice versa.
    We also confirmed if the local gateway was used for connectivity.
    The above issue was not in other systems where we only had one server.
    We currently are at Revision 49 and SP 13 in BI.
    We have E5345 Clowertown blades (2 x 4) 16GB blades.
    Please let us know if you need additional information.
    Thanks in advance for the input.
    Dharma.
    Edited by: Arun Varadarajan on Apr 24, 2009 1:36 AM

Maybe you are looking for