Dump error when posting through F-02.

Greetings everyone,
When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
From my primary analysis one standard program is calling and that program has syntax error.
When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
Generated Program is Module pool program :GBTV6FI0
Description of that program is below
Generated by report RGUGBR01.
Generated code used by validations substitutions and rules.
!! Do not manually change or transport !!
For reference please find the dump below
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "GBTV6FI0 " in in
     " in
    line 519:
    "FORM "SEND_CMPLX_DATA_015" does not exist"
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "****"
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
Can any one please suggest me how to resolve this issue.
Thanks in Advance.

This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem.  :-)

Similar Messages

  • Error when posting through F-28

    Dear Experts,
    I got error when i was posting through the Tcode:F-28. the information message was item 1 have not been activated due to inconsistance withholding tax. can any one tell me what could be the reason.
    Thanks in advance

    I understand withholding tax code in customer master data is changed between invoice posting and Payment posting.
    You may need to run RFWT0010 report. Please check OSS Note 480056

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • Short dump error when using count(*)

    Hi Experts
    I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
    I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
    select count(*) from ZINT_TABLE
    select count(*) from ZINT_MSGS
       select * from zint_data
                 nto table izint_d2 . "PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.**
    report z_eslp_command_records.
    data: cnt type i.
    data: cnt2 type i.
    data: cnt3 type i.
    data: cnt4 type i.
    DATA:
         w_date1 like sy-datum .
    DATA:
         w_date2 like sy-datum.
    data: izint_msgs type table of zint_msgs.
    data: izint_data type table of zint_data.
    data: izint_m2 type table of zint_msgs.
    data: izint_d2 type table of zint_data.
    INITIALIZATION.
    w_date1 = sy-datum -  30.
    w_date2 = sy-datum -  30.
    select * from zint_data
                 into table izint_data PACKAGE SIZE 3000
                 where STATUS = 'OK' AND CREATED_ON <= w_date1.   " ZERO
    endselect.
    select * from zint_msgs
                 into table izint_msgs  PACKAGE SIZE 3000
                  where  CREATED_ON <= w_date2.              " ZERO
    endselect.
      select * from zint_data
                 into table izint_d2 PACKAGE SIZE 20000
       where STATUS = 'OK' AND CREATED_ON >= w_date1.          " VALUE
    endselect.
    select * from zint_msgs
                 into table izint_m2 PACKAGE SIZE 20000
      where CREATED_ON >= w_date2.                            " VALUE
      endselect.
    select * from zint_data
                into table izint_data2
    where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
      select * from zint_msgs
                into table izint_msgs2
    where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
    ENDSELECT.
    sort izint_data by created_on ascending.
    sort izint_msgs by created_on ascending.
    sort izint_d2 by created_on ascending.
    sort izint_m2 by created_on ascending.
    describe table izint_data lines cnt.
    describe table izint_msgs lines cnt2.
    describe table izint_d2 lines cnt3.
    describe table izint_m2 lines cnt4.
    write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
    skip.
    write:/ '1. Records counted in ZINT_DATA   <=current date - 30                   :' color 2,                        cnt color 4.
    write:/ '2. Records available in ZINT_DATA >=current date - 30                   'color 4,                   cnt3 color 4 .
    skip.
    write:/ '2. Records counted in ZINT_MSGS   <=current date - 30                   :' color 2                 ,                      cnt2 color 4.
    write:/ '4. Records available in ZINT_MSGS >=current date - 30                   'color 4  ,            cnt4 color 4 .
    TOP-OF-PAGE.
    WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED  '.
    WRITE:/50(40) ' Command Interface Data' CENTERED .
      WRITE:/50(40) '----
    ' CENTERED .
      FORMAT INTENSIFIED ON.
      SKIP.
      "FORMAT COLOR COL_HEADING.
      ULINE.
      FORMAT COLOR 1.
    END-OF-PAGE.

    Answer

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error when posting goods issue

    hi gurus,
    can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
    thanks in advance

    Dear Ysabella
    It seems the item texts is not maintained in the order which is made as mandatory.
    Go to sale order VA02, select that line item and click on "GotoItemTexts".  There maintain the relevant text and retry.
    thanks
    G. Lakshmipathi

  • Short dump error when extracting delta records from R/3

    I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
    Below is the error message
    Kindly do the needful ASAP.
    Job started
    Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = 0ISCM_PAYMENT_01
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled

    Hi,
    I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
    Another option is to look at OSS notes, because the error is giving you a standard extractor.
    Greetings,

  • Error when posting IDoc *** in system ERP100

    Hi Experts!
    Can you pls help me with a goods receipt issue?
    When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
    The same msg is getting displayed in RZ20.
    On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
    What can be the reason for this problem please?
    What is in general the way to analyse and solve this kind of issue?
    Thanks a lot !!
    imre

    Hi,
    First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of  BBP_DOCUMENT_TAB.
    Hope this helps.
    Regards,
    Kalyan

  • Error when posting to profitabilty segments

    Dear All
    I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
    Data record already exists
    Message no. KE581
    Diagnosis
    This error should not occur.
    Procedure
    Contact your system administrator or SAP directly (component CO-PA-ACT).
    Has anyone come across this issue... ? Pls let me know how to resolve this?
    Thanks
    Gayani

    Hi,
    Please implement the latest version of the note 1321225 into your system in order to solve this problem!
    Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
    Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
    Afterwards the described problem with error message KE581 should be solved.
    regards
    Waman

  • Error when posting - Call up of feature PPMOD was not successful

    Good Afternoon,
    We recently completed an upgrade to ECC6.0 and this week we have seen two cases of receiving an error when trying to post payroll to FI using RPCIPE00.
    The error we are receiving is:  Call up of feature PPMOD was not successful, Message no. 3G100
    The diagnosis on the error message is:  Feature PPMOD has been called to set the employee grouping for account determination. This call was unsuccessful and suggests that we check the decision tree for PPMOD.
    While there have been some somewhat recent changes to PPMOD, I have stepped through the feature for both individuals who had this error and can find no problem with the logic in the decision tree. I've also regenerated the feature successfully. After searching OSS I found note 1243065, which is the exact error that we are receiving. The problem is that this note was included in HR support pack 44, and we're already on HR support pack 48. We also found a post that suggested we use RPCIPE00_OLD, but gave us the same error.
    My next step was to post a customer message, but thought it would be worthwile to post something here and see if anyone has any suggestions first.
    Thanks in advance,
    -Nick
    Edited by: Nicholas Petters on Apr 15, 2010 5:32 PM

    The issue may not be related to the note you indicated as this note should already be included in your system with SP 48. Please check what personnnel areas the errors ees are in, and see if they're in the decision tree of 'PPMOD' .
    If this looks OK, run payroll simulation for the error ee, put break-point in form 'CALL_549B' of program '/1PAPA/FEAT310PPMOD' and see what value STRUC-WERKS  (pers. area) is when it fails.

  • 070302ex603 Formatting errors when posting via BD87 transaction

    Hi experts,
    When posting idocs manually via transaction BD87 all users receive "Formatting error in the field BSEG-WRBTR..." or "Formating error in the field BKPF-BUDAT..." regardless of personal user settings. When the same idoc is posted via scheduler it posts without any error. Can anybody help me out in this issue.
    Points will be rewarded.
    With thanks in advance
    Saravanan

    Hi
    Go to T code ST22. here for the user id in which the dump is generated, click on how to rectify. The system will give you a probable resolution for the problem.  In many cases, there would be some key words, on which you need to serach for a suitable note of SAP to resolve the dump. Take the hlp of your ABAPER also
    Thanks & Best Regards
    Sanil K Bhandari

  • Update termination error when posting goods issue

    Helllo
    I have a strange problem I can not figure out.  We have serial numbers like 12345/345.  When trying to post goods issue I get an update termination error  for invalid character. This only happens if the quantity is more than 1 each.  A quantity of 1 each works fine and receives no update termination when post goods issue...only recieve termination error if the post goods issue is for a qty of 2 each.
    I searched the SAP site found OSS note 40355...applied the note.  The note also mentions the chaging print paramters to include "/ _"  this is all done.
    I tried doing a ABAP Debug in SE38 (for the delivery note print program) and setting the breaking point, but when I go to run the transaction after the setting break point...when I hit post goods issue...SE38 does not return back to its screen.  So not sure if I am running the correct program there...or if this works for the update terminations?
    So strange I do not get this for a qty of one each only when it is greater than that.  I am stumped need help....
    Any advice wiould be GREATLY appreciated....

    Looks like there is an error in the delivery (or material movement ?) print program. Easiest would be to disable these outputs for test purposes. When no dump then the error is somewhere in the print program an could be analysed by triggering the print separately with ABAP RSNAST00.
    regards Jack

  • Getting Error while posting through KB11N : No true sender object entered

    HI Expert,
    We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
    We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
    Now we realised that wrong Internal Order  was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
    No true sender object entered
    Message no. BK175
    Diagnosis
    You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
    Procedure
    1. If you require a dual account assignment, enter a true object as a sender also.
    We are using cost element with having cost element category 90.
    I don't no which is the true sender Object.
    Thanks in advance
    ealry help will be highly appreciated.

    Your postings had happened to a statistical internal order.  I hope the real postings might have happened to a cost centre.
    You cannot settle anything from a statistical internal order.  It is just for information purpose only.  If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

  • Dump error when clicked on text elements in SAP Script window

    Hi All,
    There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
    Category               ABAP Programming Error
    Runtime Errors         DATA_LENGTH_TOO_LARGE
    Except.                CX_SY_RANGE_OUT_OF_BOUNDS
    ABAP Program           SAPLSTXK
    Application Component  BC-SRV-SCR
    Date and Time          30.04.2014 20:00:08
    Short text
         Invalid partial field access: Length is too large
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
          caught in
         procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
        The reason for the exception is:
        In the executed program "SAPLSTXK", the system attempted to access the field
        "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
        However, a partial field access with a length specification that is
        larger than the field length is not allowed.
    How to correct the error
        Reduce the length used to access the field.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
        "SAPLSTXK" or "LSTXKFRN"
        "TOKEN_COMMENT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
    2937 * todo empty comment ???
    2938       if g_tm_open    eq true or     " Section
    2939          g_tm_b_close eq true.
    2940         l_token = '\chcbpat0'.
    2941         l_len = strlen( l_token ).
    2942         token_control = true.
    2943         assign l_token to <itf1>.
    2944         perform put_itf1_new using l_len.
    2945         perform token_line_begin changing l_next_token.
    2946       else.                          " without section
    2947         concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
    2948         l_len = strlen( l_token ).
    2949         token_control = true.
    2950         assign l_token to <itf1>.
    2951         perform put_itf1_new using l_len.
    2952       endif.
    2953     elseif l_next_token-code eq ')L'.         " \par
    2954       l_token = '\par'.
    2955       l_len = strlen( l_token ).
    2956       token_control = true.
    2957       assign l_token to <itf1>.
    2958       perform put_itf1_new using l_len.
    2959     elseif l_next_token-code eq '(C' or       " \par + format
    2960            l_next_token-code eq ')C' or
    2961            l_next_token-code eq '(&' or
    2962            l_next_token-code eq 'TA' or
    2963            l_next_token-code eq 'SC' or
    2964            l_next_token-code eq 'ST'.
    2965       concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
    2966       l_len = strlen( l_token ).
    >>>>>       itf_token(l_len) = l_token.
    2968       token_control = true.
    2969       assign l_token to <itf1>.
    2970       perform put_itf1_new using l_len.
    2971     endif.
    2972
    2973 * Step 7: (L to disarm
    2974   if g_compose eq true and
    2975      l_next_token-code eq '(L'.
    2976     perform read_next_itf_token(rstxscan) using p_token.
    2977   endif.
    2978
    2979 ENDFORM.                    " token_comment
    2980 *&---------------------------------------------------------------------*
    2981 *&      Form  create_lang_info
    2982 *&---------------------------------------------------------------------*
    2983 *       add default language to rtf
    2984 *----------------------------------------------------------------------*
    2985 *      -->P_HEADER  text
    2986 *      <--P_RESULT  text
    How do I open the text elements? I need to pass the variable inside SAP Script.
    Please Help. The requirement is pending from very long. Not able to rectify this issue.
    Regards,
    Rekha

    Hi,
    There is a SAP Note about this problem
    566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
    Correction Instructions
    Correction Instructions
    Software Component
    Valid from
    Valid to
    Number
    SAP_BASIS
    46B
    46D
    473267
    SAP_BASIS
    610
    620
    473185
    Support Packages & Patches
    Support Packages
    Software Component
    Release
    Support Package
    SAP_BASIS
    46B
    SAPKB46B48
    46C
    SAPKB46C39
    46D
    SAPKB46D28
    610
    SAPKB61027
    620
    SAPKB62014
    Regards
    Miguel

  • Error when updating through "Role import"

    Hi all
    I get this error when I update through Home > Authentication > SAP > Role Import:
    "An error occurred while communicating with the CMS.
    The following error message was returned:
    Error occurred in CSAPSecHttpRolePage::OnCommitRoles. Return value = -2147213817 (0x80041e07)j Failed to commit objects to server : Duplicate object name in the same folder."
    Does this mean that I have duplicate users or groups? If this is the case, how come I get the error even if I remove all roles, update, and then add a role and update again? Then everything should have been cleared?
    And the funny part is that the import of users seems to work, because I can log on to the InfoView using SAP authentication... But I don't like this error, and would like to get rid of it.
    Best regards,
    Martin Søgaard

    Hi Sogaard,
    when you remove all roles can you verify that all the user groups and users are being removed from the system ?
    after removing the roles could you also delete the entitlement system and re-create it ?
    Ingo

Maybe you are looking for