Dump in SQVI
There is a dump while trying to "change join for quick view (Tcode SQVI). Please suggest a solution and specify if any OSS notes available for this.
Hi Ravi
Runtime Error MESSAGE_TYPE_X
The code dumps at this error message
Short text of error message:
Control Framework : Error processing control
Thanks
Similar Messages
-
Tr SQVI RESULTING IN ERROR MESSAGE.
Tr SQVI is executed and table join selected and enter , it gives the following error ( The current application triggered a termination with a short dump ).
what is the solution , pl let know.Hi,
you need to have a look at that short dump (transaction ST22). You should see where it dumped and what the reason was.
Cheers -
Manny Dumps in production Please helps
I am facing a suddenly a problem in Production server
In sm50 work process get stop one by one and if try to restart again it get stop.
Ther are many dumps of 2 types but in different Tx and Table
(DBIF_RSQL_INVALID_REQUEST, TEXTENV_UNICODE_LANGU_INVALID)in the system .
In sm21 there is like to error like these
21:00:43 DIA 023 R19 Initialization DB-Connect Failed, Return Code 000256
21:00:43 DIA 023 Q02 Stop Workproc23, PID 7384
21:00:43 SPO 034 BY2 Database error 12560 at CON
21:00:43 SPO 034 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 SPO 034 BY2 Database error 12560 at CON
21:00:43 SPO 034 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 SPO 034 R19 Initialization DB-Connect Failed, Return Code 000256
21:00:43 SPO 034 Q02 Stop Workproc34, PID 1920
21:00:43 DIA 015 BY2 Database error 12560 at CON
21:00:43 DIA 015 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 DIA 015 BY2 Database error 12560 at CON
21:00:43 DIA 015 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 DIA 015 R19 Initialization DB-Connect Failed, Return Code 000256
21:00:43 DIA 015 Q02 Stop Workproc15, PID 8820
21:00:43 DIA 013 BY2 Database error 12560 at CON
21:00:43 DIA 013 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 DIA 013 BY2 Database error 12560 at CON
21:00:43 DIA 013 BY0 > ORA-12560: TNS:protocol adapter error
21:00:43 DIA 013 R19 Initialization DB-Connect Failed, Return Code 000256
21:00:43 DIA 013 Q02 Stop Workproc13, PID 8236
21:05:10 WRK 000 Q0Q Start Workproc 1, Pid 7012
21:05:10 WRK 000 Q0Q Start Workproc 0, Pid 4252
21:05:10 WRK 000 Q0Q Start Workproc 6, Pid 9112
21:05:43 SPO 033 R19 Initialization DB-Connect Failed, Return Code 000256
21:05:43 SPO 033 Q02 Stop Workproc33, PID 7060
21:05:43 BTC 029 BY2 Database error 12560 at CON
21:05:43 BTC 029 BY0 > ORA-12560: TNS:protocol adapter error
21:05:43 BTC 029 BY2 Database error 12560 at CON
21:05:43 BTC 029 BY0 > ORA-12560: TNS:protocol adapter error
21:05:43 BTC 029 R19 Initialization DB-Connect Failed, Return Code 000256
21:05:43 BTC 029 Q02 Stop Workproc29, PID 4288
21:05:43 DIA 014 BY2 Database error 12560 at CON
21:05:43 DIA 014 BY0 > ORA-12560: TNS:protocol adapter error
21:05:43 DIA 014 BY2 Database error 12560 at CON
21:05:43 DIA 014 BY0 > ORA-12560: TNS:protocol adapter error
21:05:43 DIA 014 R19 Initialization DB-Connect Failed, Return Code 000256
21:05:43 DIA 014 Q02 Stop Workproc14, PID 9456
21:05:43 DP Q0I Operating system call gethostbyaddr failed (error no. 0 )
21:05:43 DP Q04 Connection to user 5740 ( ), terminal 66 (HOLT088 ) lost
21:07:10 ENQ 027 Q02 Stop Workproc27, PID 6888
21:07:10 ENQ 027 Q02 Stop Workproc27, PID 6888
21:07:11 RD S30 SAP gateway was closed
21:07:11 RD S30 SAP gateway was closed
21:07:13 DP Q0M Message server disconnected
21:07:13 DP Q05 R/3 System stop, dispatcher PID 83
21:07:13 MS Q02 Stop Msg Server, PID 10236
21:07:13 DP Q0M Message server disconnected
21:07:13 DP Q05 R/3 System stop, dispatcher PID 83
At present listener is up and running and sap is working. It happen suddenely and after restart of R/3 system it ok but same thing happen today also. we are using windows 2003 Enterprise in server.
Please help
Best Regards,
Kumar
Edited by: Kumar on Aug 28, 2008 7:18 AM
Edited by: Kumar on Aug 28, 2008 7:20 AMDear All,
Please find the dev_disp log
trc file: "dev_disp", trc level: 1, release: "640"
kernel runs with dp version 130000(ext=102000) (@(#) DPLIB-INT-VERSION-130000-UC)
length of sys_adm_ext is 524 bytes
sysno 00
sid **
systemid 561 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 129
intno 20020600
make: multithreaded, Unicode, 64 bit
pid 6164
***LOG Q00=> DpSapEnvInit, DPStart (00 6164) [dpxxdisp.c 1098]
shared lib "dw_xml.dll" version 129 successfully loaded
shared lib "dw_xtc.dll" version 129 successfully loaded
shared lib "dw_stl.dll" version 129 successfully loaded
shared lib "dw_gui.dll" version 129 successfully loaded
shared lib "dw_mdm.dll" version 129 successfully loaded
Wed Aug 27 21:07:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >rfcl-sap-vir_PRD_00 <
DpShMCreate: sizeof(wp_adm) 51328 (1316)
DpShMCreate: sizeof(tm_adm) 35937968 (17960)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpShMCreate: sizeof(comm_adm) 1248000 (624)
DpShMCreate: sizeof(vmc_adm) 0 (512)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D110050, size: 38247047)
DpShMCreate: allocated sys_adm at 000000000D110050
DpShMCreate: allocated wp_adm at 000000000D111C30
DpShMCreate: allocated tm_adm_list at 000000000D11E4B0
DpShMCreate: allocated tm_adm at 000000000D11E4E0
DpShMCreate: allocated wp_ca_adm at 000000000F364390
DpShMCreate: allocated appc_ca_adm at 000000000F377C10
DpShMCreate: allocated comm_adm_list at 000000000F39ED10
DpShMCreate: allocated comm_adm at 000000000F39ED30
DpShMCreate: allocated vmc_adm_list at 000000000F4CF830
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F4CF860
DpShMCreate: allocated wall_adm at 000000000F4CF870
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1226 blocks reserved for free list.
ES initialized.
Wed Aug 27 21:07:25 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6 2.6 4.0) [dpxxdisp.c 1466]
**LOG Q0K=> DpMsAttach, mscon (**) []
use SAPLOCALHOST***> as internal hostname
DpStartStopMsg: send start message (myname is ***<)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Wed Aug 27 21:07:27 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 129
Release check o.K.
Wed Aug 27 21:07:50 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Wed Aug 27 21:18:22 2008
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T39, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 21:18:24 2008
Client address of T39 is >####->###- ###<)< .107(***)
***LOG Q04=> DpRTmPrep, NiBufReceive (54 ***) [dpxxdisp.c 9632]
RM-T39, U54, 600 ***, ***, M0, W0, SESS, 2/0
Wed Aug 27 21:19:34 2008
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 21:19:35 2008
Client address of T40 is >####->###- ###<)< .34(>####->###- ###<)< ->####->###- ###<)< )
***LOG Q04=> DpRTmPrep, NiBufReceive (59 ***) [dpxxdisp.c 9632]
RM-T40, U59, 600 ***, 21:18:41, M0, W0, SESS, 2/0
Wed Aug 27 21:38:45 2008
DpHdlDeadWp: restart wp (pid=2484) automatically
Wed Aug 27 21:39:05 2008
Wed Aug 27 21:41:05 2008
DpHdlDeadWp: restart wp (pid=1900) automatically
Wed Aug 27 21:48:05 2008
DpHdlDeadWp: restart wp (pid=4384) automatically
Wed Aug 27 22:01:05 2008
DpHdlDeadWp: restart wp (pid=4500) automatically
Wed Aug 27 22:01:45 2008
DpHdlDeadWp: restart wp (pid=2028) automatically
Wed Aug 27 22:09:45 2008
DpHdlDeadWp: restart wp (pid=9536) automatically
Wed Aug 27 22:10:05 2008
DpHdlDeadWp: restart wp (pid=1972) automatically
DpHdlDeadWp: restart wp (pid=7596) automatically
DpHdlDeadWp: restart wp (pid=10104) automatically
DpHdlDeadWp: restart wp (pid=6296) automatically
DpHdlDeadWp: restart wp (pid=7720) automatically
Wed Aug 27 22:12:05 2008
DpHdlDeadWp: restart wp (pid=2428) automatically
Wed Aug 27 22:28:05 2008
DpHdlDeadWp: restart wp (pid=9992) automatically
Wed Aug 27 22:34:24 2008
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 22:34:29 2008
***LOG Q0I=> NiPGetHostByAddr: address ***not found: gethostbyaddr [ninti.c 379]
Client address of T40 is *** (***)
***LOG Q04=> DpRTmPrep, NiBufReceive (122 ***) [dpxxdisp.c 9632]
RM-T40, U122, 600 ***, ***M0, W0, ZVN1, 2/2
Wed Aug 27 22:35:49 2008
DpHdlDeadWp: restart wp (pid=7132) automatically
Wed Aug 27 22:40:49 2008
DpHdlDeadWp: restart wp (pid=9272) automatically
DpHdlDeadWp: restart wp (pid=7896) automatically
DpHdlDeadWp: restart wp (pid=8856) automatically
DpHdlDeadWp: restart wp (pid=8272) automatically
Wed Aug 27 22:41:49 2008
DpHdlDeadWp: restart wp (pid=1372) automatically
DpHdlDeadWp: restart wp (pid=8276) automatically
Wed Aug 27 22:56:49 2008
DpHdlDeadWp: restart wp (pid=10128) automatically
Wed Aug 27 23:07:49 2008
DpHdlDeadWp: restart wp (pid=4476) automatically
Wed Aug 27 23:11:49 2008
DpHdlDeadWp: restart wp (pid=8404) automatically
Wed Aug 27 23:13:49 2008
DpHdlDeadWp: restart wp (pid=9268) automatically
Wed Aug 27 23:14:49 2008
DpHdlDeadWp: restart wp (pid=6472) automatically
Wed Aug 27 23:15:03 2008
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Aug 27 23:15:09 2008
***LOG Q0I=> NiPGetHostByAddr: address ***not found: gethostbyaddr [ninti.c 379]
WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c 16611]
Client address of T42 is *** (***)
***LOG Q04=> DpRTmPrep, NiBufReceive (165 ****** ) [dpxxdisp.c 9632]
RM-T42, U165, 600 RFCL-CFA-AHDHOLT267, HOLT267, 23:10:06, M0, W0, ZVN1, 2/2
Wed Aug 27 23:29:49 2008
DpHdlDeadWp: restart wp (pid=8020) automatically
Wed Aug 27 23:31:09 2008
DpHdlDeadWp: restart wp (pid=9936) automatically
Wed Aug 27 23:41:29 2008
DpHdlDeadWp: restart wp (pid=1972) automatically
Wed Aug 27 23:41:49 2008
DpHdlDeadWp: restart wp (pid=9168) automatically
Wed Aug 27 23:41:50 2008
DpHdlDeadWp: restart wp (pid=5180) automatically
DpHdlDeadWp: restart wp (pid=5568) automatically
DpHdlDeadWp: restart wp (pid=5964) automatically
DpHdlDeadWp: restart wp (pid=7352) automatically
DpHdlDeadWp: restart wp (pid=5464) automatically
DpHdlDeadWp: restart wp (pid=9080) automatically
DpHdlDeadWp: restart wp (pid=9316) automatically
Wed Aug 27 23:42:09 2008
DpHdlDeadWp: restart wp (pid=9284) automatically
Wed Aug 27 23:42:49 2008
DpHdlDeadWp: restart wp (pid=640) automatically
Wed Aug 27 23:45:49 2008
DpHdlDeadWp: restart wp (pid=5712) automatically
Wed Aug 27 23:47:49 2008
DpHdlDeadWp: restart wp (pid=4872) automatically
Thu Aug 28 00:01:49 2008
DpHdlDeadWp: restart wp (pid=6648) automatically
Thu Aug 28 00:02:09 2008
DpHdlDeadWp: restart wp (pid=6380) automatically
Thu Aug 28 00:02:29 2008
DpHdlDeadWp: restart wp (pid=7656) automatically
Thu Aug 28 00:11:49 2008
DpHdlDeadWp: restart wp (pid=1576) automatically
Thu Aug 28 00:16:48 2008
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T40, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Aug 28 00:16:54 2008
***LOG Q0I=> NiPGetHostByAddr: address ******not found: gethostbyaddr [ninti.c 379]
WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c 16611]
Client address of T40 is *(**)
***LOG Q04=> DpRTmPrep, NiBufReceive (201 ******) [dpxxdisp.c 9632]
RM-T40, U201, 600 ****, ***7, 00:11:42, M0, W1, ZVSL, 2/1
Thu Aug 28 03:59:54 2008
DpHdlDeadWp: restart wp (pid=6008) automatically
Thu Aug 28 04:00:54 2008
DpHdlDeadWp: restart wp (pid=1776) automatically
Thu Aug 28 05:01:14 2008
DpHdlDeadWp: restart wp (pid=7496) automatically
Thu Aug 28 05:04:14 2008
DpHdlDeadWp: restart wp (pid=7848) automatically
Thu Aug 28 05:07:14 2008
DpHdlDeadWp: restart wp (pid=9600) automatically
Thu Aug 28 05:14:54 2008
DpHdlDeadWp: restart wp (pid=480) automatically
Thu Aug 28 06:25:54 2008
DpHdlDeadWp: restart wp (pid=7404) automatically
Thu Aug 28 06:26:54 2008
DpHdlDeadWp: restart wp (pid=9508) automatically
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 789]
Network error of client T44, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Aug 28 06:32:07 2008
***LOG Q0I=> NiPGetHostByAddr: address ****** not found: gethostbyaddr [ninti.c 379]
WARNING => NiAddrToHost took 6 seconds [dpxxdisp.c 16611]
Client address of T44 is **(*)
***LOG Q04=> DpRTmPrep, NiBufReceive (255 &&&& ) [dpxxdisp.c 9632]
RM-T44, U255, 600 ****, 06:27:03, M0, W0, SQVI, 2/2
Thu Aug 28 06:39:54 2008
DpHdlDeadWp: restart wp (pid=2080) automatically
Thu Aug 28 06:47:54 2008
DpHdlDeadWp: restart wp (pid=6620) automatically
Thu Aug 28 06:48:34 2008
DpHdlDeadWp: restart wp (pid=6856) automatically
Thu Aug 28 06:50:54 2008
DpHdlDeadWp: restart wp (pid=8780) automatically
Thu Aug 28 06:51:14 2008
ERROR => W28 (pid 2104) died [dpxxdisp.c 12414]
Thu Aug 28 06:53:34 2008
ERROR => W28 (pid 7484) died [dpxxdisp.c 12414]
Thu Aug 28 06:55:54 2008
DpHdlDeadWp: restart wp (pid=4212) automatically
Thu Aug 28 06:56:34 2008
ERROR => W1 (pid 7940) died [dpxxdisp.c 12414]
Thu Aug 28 06:56:54 2008
DpHdlDeadWp: restart wp (pid=9144) automatically
Thu Aug 28 06:57:34 2008
ERROR => W33 (pid 8824) died [dpxxdisp.c 12414]
Thu Aug 28 06:57:54 2008
DpHdlDeadWp: restart wp (pid=3640) automatically
DpHdlDeadWp: restart wp (pid=8420) automatically
Thu Aug 28 06:58:34 2008
ERROR => W1 (pid 9156) died [dpxxdisp.c 12414]
ERROR => W5 (pid 7220) died [dpxxdisp.c 12414]
ERROR => W28 (pid 8444) died [dpxxdisp.c 12414]
ERROR => W33 (pid 5500) died [dpxxdisp.c 12414]
ERROR => W34 (pid 8076) died [dpxxdisp.c 12414]
Thu Aug 28 06:58:54 2008
DpHdlDeadWp: restart wp (pid=6692) automatically
Thu Aug 28 06:59:34 2008
ERROR => W35 (pid 1996) died [dpxxdisp.c 12414]
Thu Aug 28 06:59:54 2008
DpHdlDeadWp: restart wp (pid=8832) automatically
DpHdlDeadWp: restart wp (pid=6644) automatically
Thu Aug 28 07:00:34 2008
ERROR => W29 (pid 8108) died [dpxxdisp.c 12414]
ERROR => W36 (pid 6760) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbf --> 0xaf
Thu Aug 28 07:01:34 2008
DpHdlDeadWp: restart wp (pid=8304) automatically
Thu Aug 28 07:02:54 2008
my types changed after wp death/restart 0xa7 --> 0xbf
Thu Aug 28 07:03:34 2008
ERROR => W1 (pid 1716) died [dpxxdisp.c 12414]
ERROR => W2 (pid 9320) died [dpxxdisp.c 12414]
ERROR => W5 (pid 5296) died [dpxxdisp.c 12414]
ERROR => W28 (pid 6256) died [dpxxdisp.c 12414]
ERROR => W29 (pid 8468) died [dpxxdisp.c 12414]
ERROR => W30 (pid 9000) died [dpxxdisp.c 12414]
ERROR => W31 (pid 5612) died [dpxxdisp.c 12414]
ERROR => W32 (pid 3844) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbf --> 0xb7
ERROR => W33 (pid 1700) died [dpxxdisp.c 12414]
ERROR => W34 (pid 1268) died [dpxxdisp.c 12414]
ERROR => W35 (pid 9048) died [dpxxdisp.c 12414]
ERROR => W36 (pid 9668) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb7 --> 0xa7
Thu Aug 28 07:07:54 2008
my types changed after wp death/restart 0xa7 --> 0xbf
DpHdlDeadWp: restart wp (pid=1172) automatically
Thu Aug 28 07:11:54 2008
DpHdlDeadWp: restart wp (pid=6484) automatically
Thu Aug 28 07:12:34 2008
ERROR => W3 (pid 1700) died [dpxxdisp.c 12414]
Thu Aug 28 07:17:54 2008
my types changed after wp death/restart 0xa7 --> 0xbf
DpHdlDeadWp: restart wp (pid=8212) automatically
DpHdlDeadWp: restart wp (pid=9276) automatically
Thu Aug 28 07:18:34 2008
ERROR => W2 (pid 1936) died [dpxxdisp.c 12414]
DpHdlDeadWp: restart wp (pid=5108) automatically
ERROR => W7 (pid 3644) died [dpxxdisp.c 12414]
Thu Aug 28 07:18:54 2008
DpHdlDeadWp: restart wp (pid=708) automatically
ERROR => W4 (pid 1560) died [dpxxdisp.c 12414]
Thu Aug 28 07:19:14 2008
ERROR => W0 (pid 8636) died [dpxxdisp.c 12414]
Thu Aug 28 07:19:34 2008
DpHdlDeadWp: restart wp (pid=1736) automatically
Thu Aug 28 07:19:54 2008
ERROR => W11 (pid 9428) died [dpxxdisp.c 12414]
DpHdlDeadWp: restart wp (pid=7572) automatically
DpWpRestart: pid 8056 of WP12 also found for WP28 - removed
ERROR => W28 (pid 8056) died [dpxxdisp.c 12414]
DpHdlDeadWp: restart wp (pid=5932) automatically
DpWpRestart: pid 4248 of WP13 also found for WP31 - removed
ERROR => W31 (pid 4248) died [dpxxdisp.c 12414]
DpHdlDeadWp: restart wp (pid=1988) automatically
DpWpRestart: pid 5220 of WP14 also found for WP33 - removed
ERROR => W33 (pid 5220) died [dpxxdisp.c 12414]
Thu Aug 28 07:20:14 2008
ERROR => W12 (pid 8056) died [dpxxdisp.c 12414]
ERROR => W13 (pid 4248) died [dpxxdisp.c 12414]
ERROR => W14 (pid 5220) died [dpxxdisp.c 12414]
Thu Aug 28 07:20:34 2008
DpHdlDeadWp: restart wp (pid=1348) automatically
Thu Aug 28 07:20:54 2008
DpHdlDeadWp: restart wp (pid=6220) automatically
Thu Aug 28 07:21:14 2008
ERROR => W15 (pid 6096) died [dpxxdisp.c 12414]
ERROR => W16 (pid 4264) died [dpxxdisp.c 12414]
Thu Aug 28 07:21:34 2008
DpHdlDeadWp: restart wp (pid=8708) automatically
Thu Aug 28 07:47:54 2008
my types changed after wp death/restart 0xa6 --> 0xbf
Thu Aug 28 07:48:34 2008
ERROR => W0 (pid 6496) died [dpxxdisp.c 12414]
ERROR => W1 (pid 6772) died [dpxxdisp.c 12414]
ERROR => W2 (pid 6264) died [dpxxdisp.c 12414]
ERROR => W3 (pid 6760) died [dpxxdisp.c 12414]
ERROR => W4 (pid 5772) died [dpxxdisp.c 12414]
ERROR => W5 (pid 9164) died [dpxxdisp.c 12414]
ERROR => W6 (pid 5244) died [dpxxdisp.c 12414]
ERROR => W7 (pid 7908) died [dpxxdisp.c 12414]
ERROR => W8 (pid 9604) died [dpxxdisp.c 12414]
ERROR => W9 (pid 4472) died [dpxxdisp.c 12414]
ERROR => W10 (pid 7164) died [dpxxdisp.c 12414]
ERROR => W11 (pid 1996) died [dpxxdisp.c 12414]
ERROR => W12 (pid 9864) died [dpxxdisp.c 12414]
ERROR => W13 (pid 1848) died [dpxxdisp.c 12414]
ERROR => W14 (pid 8348) died [dpxxdisp.c 12414]
ERROR => W15 (pid 4536) died [dpxxdisp.c 12414]
ERROR => W16 (pid 5808) died [dpxxdisp.c 12414]
ERROR => W17 (pid 5444) died [dpxxdisp.c 12414]
ERROR => W18 (pid 7444) died [dpxxdisp.c 12414]
ERROR => W19 (pid 1160) died [dpxxdisp.c 12414]
ERROR => W20 (pid 2028) died [dpxxdisp.c 12414]
ERROR => W21 (pid 4364) died [dpxxdisp.c 12414]
ERROR => W22 (pid 8752) died [dpxxdisp.c 12414]
ERROR => W23 (pid 3944) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W28 (pid 8952) died [dpxxdisp.c 12414]
ERROR => W29 (pid 7804) died [dpxxdisp.c 12414]
ERROR => W30 (pid 4940) died [dpxxdisp.c 12414]
ERROR => W31 (pid 8292) died [dpxxdisp.c 12414]
ERROR => W32 (pid 9200) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbe --> 0xb6
ERROR => W33 (pid 7888) died [dpxxdisp.c 12414]
ERROR => W34 (pid 4396) died [dpxxdisp.c 12414]
ERROR => W35 (pid 5496) died [dpxxdisp.c 12414]
ERROR => W36 (pid 8252) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb6 --> 0xa6
Thu Aug 28 07:50:00 2008
DpSigInt: caught signal 2
DpHalt: shutdown server >####->###- ###<)< (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes...
Thu Aug 28 07:50:01 2008
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of gateway
Thu Aug 28 07:50:02 2008
waiting for termination of icman
Thu Aug 28 07:50:03 2008
DpStartStopMsg: send stop message (myname is >###- ###<)
DpStartStopMsg: stop msg sent
Thu Aug 28 07:50:04 2008
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10153]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 6164) [dpxxdisp.c 8643]
Thanks
Kumar
Edited by: Kumar on Aug 28, 2008 9:30 AM -
Dear All,
I am Getting ABAP Runtime error while creating table join using t-code SQVI .
When i Go to SQVI - - - then Quick View ZABC - - -Insert Table - - -Add Table EKKO
Its giving me run time error
Could you please hepl me find out any OSS Notes available for this
Thanksing in Advance,What is does the short dump tell you, read the first 5 sections in the short dump, this gives usually good info to search for the rott cause.
-
Hi experts,
I did maked a query in SQVI. When I log in the system TR I can open the report but I couldn't open in ES. I've got a dump. You can see the following error analysis. What should I do?
"A RAISE statement in the program "CL_GUI_ALV_GRID===============CP" raised the
exception
condition "NO_FIELDCATALOG_AVAILABLE".I tested this case as well with DE and EN and I have no problem with SQVI to execute the same quickview in multiple languages.
There are several OSS notes if you search with the "NO_FIELDCATALOG_AVAILABLE"
Search yourself and see if you find a solution.
Otherwise open a message at SAP. If the languages are correct installed, then you should be able ot execute the quickview in other logon languages too.
I can even execute in in Chinese.
When I start in SQVI, then I see everything in German or english, just as it was created. then I select and execute.
And in that moment I get all selection fields in Chinese. Jut the quickview titel is still in the creation language.
and after executing the selection, all my column headers are in chinese too.
No dump. -
How can I setup the query timeout for SQVI in basis?
Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for readingThe memory is limited by the parameters
abap/heap_area_dia
abap/heap_area_nondia
abap/heap_area_total
which are system wide.
If a user requests more memory than those, the program will dump.
Markus -
Dear Experts,
When i am creating querry in SQVI using Table Join i am getting run time error MESSAGE_TYPE_X " The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type X)."
How to rectify this error????
Raj.HI
Check the joining condition and try again
Thanks & Regards
Phaneendra -
Using SQVI to generate report of open and released delivery schedule lines
All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi. -
Lock ups and dumping psyical memory!!!
Hi i have just installed a new pc most of the stuff im useing is from my old computer so i know they work fine im running a:
P4 3GHZ Prescot 800MHz, HT-Enabled
865PE Neo2-P
512 DDR-400 Twin moss
ATI Radeon 9000 pro
PSU-400
XP Pro
My computer locks up alot when running intense games (games have worked before no problem) i also get a error saying dumping pysical memory, i have looked about and tried to solve this myself, i found that someone was haveing the exact same problem as me and he fixed it by turning the FSB down as his memory wasnt compatable with his motherboard if doing that works how do i do it ?
Many thanks JonathanFlappa, Your memory " clock" is fine and there is no need to "underclock it" as long as you did not mess with the Bios.
I had the same problems. I could not even get thru a Clean install of windows as it would Blue Screen
1- are you running in " Dual Channel Mode"?
2- If so is your memory a " match Set"?
some times memory even thought it has the same markings is not matched . Dual channel sets are matched and made to run together in "Dual Channel Mode"{
( Even though I had the same manufacturer memory my set would not run in Dual Channel without " Blue Screening" I bought a Matched Set of Kingston Valueram and have not had a problem since
3- If it is not a matched set, pull one stick out and run it for a while , if it still bluescreens try the other stick
4- raise your memory voltage to 2.7 or 2.8 ( which ever is the lowest that it runs stable)
5- If all this does not work , run MEMTEST to see if there is a problem with both sticks
6- you are running a Bios Version that supports the " Prescott Microcode" right?
Let us know what your findings are
Good Luck
Dave -
Report J_1IEWT_CERT getting cancelled, generating ABAP dump!
A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
When changing or deleting one or more lines of the internal table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
At the time of the termination, the table contained 17008 lines.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TABLE_INVALID_INDEX" " "
"J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
"FILTER_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Creating a service report using SQVI
Hi experts
I am creating a service report using SQVI
The report should have the following fiels
SrvPO No | SrvPO Data | vendor | Stata | City | Type of Srv (Ad\banner|maintnc.) | Amount | Status(open or closed)
I am using the following tables using table join fnc
1. EKKO
EBELN-PO No
AEDAT - PO Data
LIFNR - Vendor
PROCSTAT - Status of PO doc
2.LIFNR
REGIO - State
ORTO1 - City
3. ESSR
TXZ01 - Type of Service (Short text)
4.EKPO
NETWE - Net amount of PO
All the tables are legally join but after executing I am not able to fetch any data or hardly one service PO.
And the selection field will be only From Date and To date.or the Service PO No.
Immediate response is urgent
Regards
ParthaModerator message: you said your issue is solved but did not mark your discussion as such, please see
How to close a discussion and why -
Using SQVI To Generate Program in DEV
I have read a lot about the merits of using SQVI for simple queries and then generating the code and assigning to a transaction code so that others can run the query/report. I have found posts in this forum that suggest using SE93 to create a transaction code and assign the SQVI generated program is the only way that an SQVI query can be shared. I certainly hope they were not assuming that users have SE93 in a production environment??
My question is, if I create this query and generate the program in our DEV environment and then assign it to a transaction code, can this be transported from DEV to TST to PRD intact? Will this work?
One other question, when the program is generated does it also create the required authorization checks? I am using USR* tables for this report, nothing considered sensitive, would any additional authorizations be required to allow just about any user to run the transaction?
Disclosure, I am a power user and not an ABAP specialist.
I appreciate a speedy reply if that is possible.
Thanks
MarkHi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
Is it possible to create manually a dump?
Dear all,
I have a question about Dumps created in SAP while programs run with unpredicted errors.
I have a specific table defined in the dictionary which has two coloumns progId and path.
The first one is a unique identifier given to a program and the second column is an absolute path on the
unix server where SAP is installed.
For example
MyProg | /usr/tmpbatch/data/E200
Means that the ABAP program named 'MyProg' will run and its output file (the output of the program) and the
log file are created in /usr/tmpbatch/data/E200.
In each of my programs, first of all I check the content of this table in order to ensure that the path is defined for the
given program (and therefore I may be able to create avec success both output and log files). If there is no entry
in the table for the given program, I leave the program by calling the STOP instruction.
My programs run at night, so the next day the corresponding users read the content of the generated output/log files.
As a result, if the path is not defined properly for a given program in the table, the program is not run and therefore
there will be no output/logfile the next day.
My question is How can I inform the user who arrives the next day observing that one program has not been run? How
can I tell him by some kind of system message that the program exited because the path for the files had not been defined in
my table?
Each morning, we can analyse the dumps which were produced during the precedent day. So that we may know
(approximately) what went wrong. But as far as I know, dumps are generated automatically by the system. Is it possible
to generate a dump (by calling some fucntion) with an appropriate error message for my problem?
Thanks in advance,
DariyooshHello again,
First of all I would like to thank everybody for their attention to my problem and
for spending time for answering my question. Thank you all very much.
Currently, Thomas' solution about MESSAGE_TYPE_X seems to work pretty well
for my problem. As all of you mentioned that, there should be softer methods to inform
users. One main problem is that the program which lanuches my programs during night
is not a sap user, it is a Unix scheduler (please forgive me I don't know these administration
details and how they work) so according to what the administrator told me it is not possible
to send email. As a result, I think I may go with MESSAGE_TYPE_X until I found another proper way.
Once again, thank you all for your help.
Kind Regards,
Dariyoosh
Maybe you are looking for
-
NQSError: 47051 error on Windows cluster
I'm getting nQSError: 47051 while installing OBIEE cluster on windows. Here's the situation. We are installing OBIEE (10.1.3.4) on a two node (Windows 2003, SP2) cluster. The shared file system is built on a SAN using windows clustering. This windows
-
Sharing 1 iTunes library on a network
I have recently added a new Airport Extreme (n) to my setup and now have a usb hard drive. I want to use this drive to host my itunes library and therefore make it always available to the computers in our house. We have 2 macs (10.4.8) and 1 pc (runn
-
IMovie and iDVD, Stupid Upgrade Questions, Sorry Must Ask
Okay, the deal is I have a PowerMac G4 Version 2.1 with a Combo Drive. I am upgrading to Mac OSX 3.0 so I can do certain things in iMovie and acquire a better browser. (My constraints on the iMovie project about which I've been inquiring are that at
-
User Exit on the save of Billing document (VF01)
Hello All, I have a requirement where in during the creation of a billing document of a particular type i need to put in a block to prevent the creation of a accounting document and call a workflow to remove the block in the Invoice. My requirement i
-
Time capsule 'error occurred reading settings'
I was trying to configure 'back to my Mac' when I lost my Time Capsule. Have now got most systems OK and the Airport Utility window shows that I am connected to the internet; however it states 'no base stations found, searching'; on 'other wi-fi devi