Dunning selection parameters

Dear Friends,
I want to do dunning Portion wise, is there a way or event by which this can be achieved.
In transactions FPVA or for instance any mass trasaction activities, the fields under custom selections doesn;t seems to be of any relevance. Only selection is possible at following fields
Business Partner
Contract Account
Contract
Company Code
Specifying any other custom selections fields doesn't effect the input parameters.
Can anyone throw some light on the issue.
Thanks
Gagan

Hello Gagan,
if custom selection is defined it should work. The implementation of custom selelctions is done by the develper of a mass activity.
Andrea Waldi is the responsible developer of FPVA, she surely can help you with dunning run.
Regards, Marina

Similar Messages

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

F150 Dunning selection executed, job deleted

Hi ,
Pl let me know that from tcode F150 i am getting error like "Dunning selection executed, job deleted".
after defining Parameter & scheduling the job, it is deleting. Whereas It should come "selection scheduled for 28.08.05 at 00:00:00".
Thanks,
Chandra Prakash

Did you try to debug it? Put a break-point inside the 'JOB PREAPARATION' routine in the include LF150F01 and check whether the Job is created?
good luck,
Suresh Datti

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

BI: Virtual Provider for ECC Report with same selection parameters

Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.

please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand

Received payment documents (not cleared yet) in dunning selection

Dear experts,
Do you know if it is possible to have received payment documents (not yet cleared against open items) in the dunning selection, dunning list and dunning letter?
Is there a BADI or BAPI we can use to change the document selection of the dunning program?
Hope to hear from you soon.
Best regards,
Jurriaan

Hi,
As a standard, whenever you are receiving collections without refering to any invoice, both the items (means customer invoice and receipts) will appear in the dunning notice... !!!
If the collection received by using SPL GL indicator, then you have to activate the particular SPL GL indicator in T Code FBMP and SP. GL indicator tab
Hope it clears your doubt.
Regards
A.Saravanan.

How to identify the selection parameters of already executed transactions

Hi,
I like to identify the selection parameter of already executed transaction.
SM20 shows me which transaction was executed on which day and by whom.
But it does not give me it is executed with which kind of selection parameters.
For example, MD02/03 was executed many times, I like to know who execute it with parameter "2" for "create purchase req.".
How can I know it?
Regards,
Kenichi Kaneda

Hi,
I don't think so that SAP stores this information anywhere.

How to give Selection Parameters text in Standard SAP reports?

Hi,
I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen.
But I am not able to give text to the selection parameters.
I checked with Modification overview, its not allowing me to put text to custom Selection screen parameters.
Regards
Mohinder Singh Chauhan

Hi Friends,
I had created a dynamic selection text for a select-option created using Implicit Enhancements.
The select-option field is for MARA-MTART and the dynamic text i had given in the code is "Material Type".
But my client wants it to refer to the data dictionary reference so that it will print the labels given there and especially in the logon language.
Generally it can be done by selecting the checkbox next to the select-option, available in the Text Elements/Selection Texts Screen of the ABAP Editor.
So how to check that box(i.e., how to refer the data dictionary reference) dynamically?

Changing generic selection parameters for Payment advice notes

Hi,
I want to add few more generic selection parameters for Automatic Payment advice notes generation on the seletion screen(f110 - rffoavis_fpaym). Please let me know the config settings for doing this.

Hi Pradeep,
you can change the sender, when you change the system-field SY-UNAME before calling FM SO_NEW_DOCUMENT_ATT_SEND_API1.
REPORT Z_TEST_SEND_MAIL.
h_uname must be a SAP-UserId.
sy-uname = h_uname.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOC_CHNG
     PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = OBJPACK
      OBJECT_HEADER              = OBJHEAD
      CONTENTS_BIN               = OBJBIN
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      OPERATION_NO_AUTHORIZATION = 4
      OTHERS                     = 99.
I tried it and it was successfull.

BOXI 3.0 Selecting "parameters" when rescheduling returns error in InfoView

All,
Fresh installation of BOXI 3.0 and application of FP2. SQL Server Express 2005 BOXI database. Default TomCat web.
Installation had no problems. Used the import wizard to import a couple of reports from previous BOXIR1 system.
I go into InfoView and "schedule" a report. I set the parameters (static, from a combobox) etc... the report runs fine. I can open the report. Everything seems normal and functional to this point.
Then I select the report again, and opt to "reschedule" from the list of actions. This opens the "Instance Title" screen as it should. However, when I then select "parameters" I get the following error :
"An error has occurred: $Proxy4"
This is our second installation of BOXI 3.0 - the first acted the same but resulted in a $Proxy5 error.
What does this mean?
Thanks!
Rob

ADAPT01113079
In Infoview schedule the report to pdf format, and once it goes to success.
Click on the reschedule option and then click on the parameter option.
The error "An error has occurred:$Proxy4" will be thrown.
Target Fix: XI 3.0 FP1
Workaround: No
There was a bug in 3.0 that was fixed in FP1 that seems to match your symptoms. You can try installing FP1. If that doesn't resolve then I'd suggest openinjg a message with support so they can verify your workflow.
Regards,
Tim

Executing Report Painter Report in Loop With Different Selection Parameters

Hello all,
I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
Has someone an idea how to to this work in an automatic loop.
Thanks.

HI,
My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
Regards

Only 'EQ' and 'I' allowed for selection parameters

Hi!
We are generating the list of POs with open GR thru ME2M with selection parameters of WE101 and WE107, however, we encountered an error which states "Only 'EQ' and 'I' allowed for selection parameters."
What shall we do?

Hi,
This error will have nothing to do with the selection parameter setting but the variant you are defining for your ME2M transaction. Can you therefore provide detailed info on how you set it up in your system?
Cheers,
HT

Adding selection Parameters to the POP-UP Screen

Hi my requirement is i need to add all the line items netweight and gross weight and need to show the total line items in a pop up window when i press enter after entering the line items in ME21N.
Here iam using the user exit : EXIT_sapmm06e_016 .
It is working fine But now i need to add selection parameters in this pop up window.
The two selection parametes are Shipping Point and Shipping Condition.
So how to add selection parameters in POP UP Screen and how it will be updated in ME21N Line items,.

in ur custom defined screen, you can add the selection parameter which wouldbe called within ZXM06U41.
Validate ur entries.. and you can make use of BAPI/ BDC to update those details in ME21N

Selection parameters MIR11

Dear experts,
For fiscal constraints, we need to change the "document date" when runing and posting documents in MR11, but in the selection parameter, we can define manually only the "posting date".I see that for some MM reports we can add and change some selection parameters.
Is it possible to add "document date" to the selection parameters in MR11, so that we can define it manually as we do for the posting date?
Thanks for your help.
Houda

Dear Preeti,
My problem is not related to a number ranges, but i need to define the document date manually instead of automatically by the system, like when we are booking FB01, we can define manually the document and the posting date.
To solve my issue , i think about a standard setting that may add the document date field in the selection criteria so that we can change define it manually (same as the posting date field)...
I already search in the forum but unforunately i didn't find an answer to my question.
Do you have any idea?
thanks
Houda

Dunning selection parameters

Similar Messages

Maybe you are looking for