BOXI 3.0 Selecting "parameters" when rescheduling returns error in InfoView

All,
Fresh installation of BOXI 3.0 and application of FP2. SQL Server Express 2005 BOXI database. Default TomCat web.
Installation had no problems. Used the import wizard to import a couple of reports from previous BOXIR1 system.
I go into InfoView and "schedule" a report. I set the parameters (static, from a combobox) etc... the report runs fine. I can open the report. Everything seems normal and functional to this point.
Then I select the report again, and opt to "reschedule" from the list of actions. This opens the "Instance Title" screen as it should. However, when I then select "parameters" I get the following error :
"An error has occurred: $Proxy4"
This is our second installation of BOXI 3.0 - the first acted the same but resulted in a $Proxy5 error.
What does this mean?
Thanks!
Rob

ADAPT01113079
In Infoview schedule the report to pdf format, and once it goes to success.
Click on the reschedule option and then click on the parameter option.
The error "An error has occurred:$Proxy4" will be thrown.
Target Fix: XI 3.0 FP1
Workaround: No
There was a bug in 3.0 that was fixed in FP1 that seems to match your symptoms. You can try installing FP1. If that doesn't resolve then I'd suggest openinjg a message with support so they can verify your workflow.
Regards,
Tim

Similar Messages

How restet field-content selection-screen when I return to screen 1

Hi!
My case!
0) Abap report pgm with selection-screen fields.
1) I have a screen where the user send in information in
 X fields.
2) The content is shown as an ALV list.
3) Table will be updated.
4) Return to first screen where screen-output has been
 set to zero.
5) HOW DO I CLEAR THE REAL CONTENT OF THEESE FIELDS?
 WHERE CAN I SEE THE CONTENT? When I debug they are ' '.
Please give me some input. The content is somewhere but I don't know where ...
Regards Christina

For example, see this progam, I enter values in the selection screen, and execute, after displaying the list, I hit Back, and the selection screen comes with no values.
report zrich_0001.
parameters: p_chk1 type c,
 p_chk2 type c,
 p_chk3 type c.
start-of-selection.
write:/ p_chk1, p_chk2, p_chk3.
free memory.
Welcome to SDN! Please be sure to award points for helpful answers and mark your post as solved when solved completely. Thanks.
Regards,
Rich Heilman

Unable to select parameters when SSRS 2008R2 report is deployed

I have over one hundred reports deployed to a stand alone SSRS2008R2 server. For almost all of the reports, the standard report parameters are:
DBName (an internal parameter used for an embedded connection string)
Date Range (pre-set date selections such as Last Week, Current Month, Last Quarter, etc)
Location (integer value)
Beginning Date
Ending Date (both dates use the output of Date Range as the default but can be overridden.
The reports have always deployed and have worked using these parameters and sometimes other parameters with no problems for years. I just deployed a new report that uses the same 5 parameters that the other reports use and only those 5 parameters.
The only difference is that instead of Location passing an integer value, it passes a text value (CHAR(8) specifically). When the report is deployed to the server, the Date Range parameter appears and allows the user to select a Date Range but
none of the other parameters show any values and do not allow the user to select a value. The odd thing is that if I change the DataSource to use a specific database and run it on Report Manager through Report Builder, it works fine. When I run
it directly on Report Manager, it does not work. It also does not work when run via the site it is deployed to. I have run SQL Profiler and all it shows is that the stored procedure for the Date Range parameter is run successfully. I also
cannot see anything telling in the Reporting Services log and there is nothing special about the ASP.NET code related to the report. I have spent over 12 hours on this issue and am truly stumped.
Any ideas on how to fix this? This needs to fixed urgently.
Derrick

Hi DerrickVH,
According to your description, you have more than one hundred reports with 5 parameters in SSRS 2008 R2, the reports works fine. You deployed a new report to report server, it has same parameters except data type of location is text. When you run the report,
only Date Range parameter is displayed and allows users to select values from drop down list. If you specify a database and run the report use report builder, the report works fine.
In Reporting Services, we can use dynamic data source through an expression-based connection string. To troubleshoot this problem, please refer to the following steps:
The dynamic database connection string can only be used with an embedded data source, we could not use it with a shared data source.
Specify credentials separately from the connection string.
Make sure there is corresponding values for the parameters in the database.
Verify the connection string and values of parameter DBName is correct.
For more information about Expression-based on connection strings, please refer to the following document:
http://technet.microsoft.com/en-us/library/ms156450.aspx#Expressions
If the problem remain unresolved, i would appreciate it if you could give us detailed information of the report, it’s better to provide screenshot and sample data about the report in design surface, it will help us move more quickly toward a solution.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Problem with select query when it returns a NULL value

Hi all,
I have a d/b table called QMEL and i picked VBELN from that table. Now if the VBELN value in that table is NULL i have to wtite an if condition.
Can i say it like this
IF VBELN = ' '.
write: enter into the if condition.
ELSE.
write: enter into the else condition.
ENDIF.
or should is say some thing else? my objective is ..i should execute some statments if VBELN has no value and i should execute some othet statements if VBELN has a value.
Kindly help..as even though i put above condition..it deosnot work
Regards,
Jessica Sam

hi
check this
if u r using selection optins use this code
IF NOT s_material[] IS INITIAL.
    SELECT material
    FROM marc
           INTO l_material
         WHERE material IN s_material.
    ENDSELECT.
    IF sy-subrc NE 0 AND l_material IS INITIAL.
      MESSAGE e302 WITH space.
    ENDIF.
ENDIF.
if u r using parameter then
IF NOT P_material IS INITIAL.
    SELECT material
    FROM marc
           INTO l_material
         WHERE material EQ P_material.
    ENDSELECT.
    IF sy-subrc NE 0 AND l_material IS INITIAL.
      MESSAGE e302 WITH space.
    ENDIF.
ENDIF.
~linganna
Edited by: katigiri linganna on Apr 8, 2009 5:58 AM

Select-options and Parameters, when to use what?

Hi gurus,
I have been using Parameters for long. Now I want to choose a range of values, which I need to retrieve from database.
I tried using select-options. Can't I use 2 parameters that is parameter1 and parameter2 and mention query BETWEEN para1 AND
para2, and when I use NO INTERVALS and NO EXTENSION together, it behaves same like parameter, then why did SAP gave these
extensions.

Hi friend,
Simple differences between Select-options and parameters.
Select-Options Uses keyword 'for'
Parameters Uses keywords 'like', 'type'
Select-Options Uses operator 'in'
Parameters Uses operator '='
Select-Options Provides ranges for selection
Parameters No ranges only single value
Select-Options Creates selection table
Parameters No selection table
Select-Options When i/p blank all records selected
Parameters   When i/p blank none is selected
Note:
Select options can act as parameters by using 'no-extension' 'no intervals', but all records will be selected when i/p is blank unlike parameters.
Might be helpful..
Thanks...
Edited by: Guest77 on Feb 10, 2009 5:44 AM

VBA Userforms – Getting errors when item from combo box is not selected

Hi there
Thank you in advance for taking the time to check this out.
Objective:
I have 2 combo boxes, one is dependent on what has been selected in the first combo box (dynamic named range), they work fine except for an irritating error when the user accidentally clicks in the empty
Cmbox_IncCategory and it won’t allow the user to go back to the
cmbx_Category_Type box if the user forgot he had to make a selection from that first before selecting the
Cmbox_IncCategory.
The error that pops up is “Invalid property value”.
I tried having text in there to say “please select from Cmbox_IncCategory first, but that didn’t fix it.
I tried to ‘If error resume next’ but that didn’t like it either. Now I am stumped.
Main combo box= cmbx_Category_Type
2nd combo box (displaying a list dependent on what was selected in Main combo box)= Cmbox_IncCategory
I know there must be a way to fix it so that if a user clicks on the combo box, but doesn’t make a selection it won’t lock up the form.
Yes, it is a mandatory field, and I was considering using a message box to advise the user that this must be completed, but I am not sure how to do it (and avoid the errors
Here’s the current code I have for the combo boxes.
Me.Cmbox_IncCategory = "" 'Clears the contents of the 2nd combobox when another category is chosen
On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I’d be really grateful if someone could help me out, or perhaps direct me to where I might find some coding that will achieve the result I am seeking.
This links to
My Sample form
With much gratitude,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi Peter,
Thank you for your quick response :) Brave man! :)
Both combo boxes are blank to start with (because nothing has been selected). If I click on the first combo box (cmbx_Category_Type) which lists the main events/category types, but I don't select any thing, and I click in the secondary box
(Cmbox_IncCategory) and then click on any other control, I get an “Invalid property value” error. When I click OK on the error (a few times) and I return to the code window, it gives no indication where/what is breaking
the code/causing the error. I have no choice but to exit the form by stopping in the code window.
If I click on the first textbox, (cmbx_Category_Type), and then do the right thing and make a selection, then I have no problems with the secondary textbox (Cmbox_IncCategory).
As I am not that up on VBA I am trying to follow your instructions... I have changed the code as follows, removed and replaced the rowsource name, but I encounter the very same problem.
When I changed my code from Me.Cmbox_IncCategory="" to yours myCombo.ListIndex = -1 (changing the combo box name to reflect my combo box name) and adding the second line of code ...
Me.Cmbox_IncCategory.ListIndex = 0 I still got the same behaviour and error.
I even tried moving each row of the named rows down one row (so that there would be a 'blank' row which could be selected to get out of trouble, but it wasn't very successful either.
Have you opened my form to see what happens, I included the link so whoever was looking at my problem (and yes, I have many I know), could see for themselves what it is doing/not doing.
The code now reads as below (is this what you meant?) - the results were as I mentioned above.
Me.Cmbox_IncCategory.ListIndex = -1 'Clears the contents of the 2nd combobox when another category is chosen
Me.Cmbox_IncCategory.ListIndex = 0
' On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I appreciate your patience :) I am growing in knowledge, but its a slow process. Please let me know if there is anything else I can help clarify for you :)
This links to
My Sample form
Thanking you again
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Prompts parameters disappear when reschedule a instance from history

Dear All,
In BI 4.1 launch pad, when I reshceudle a report using an instance from the history, the prompt values given for that instances disappear for all prompts and need to enter all the parameters again. This happens only when I click the prompt icon on the schedule window, otherwise the parameters are retained and the report can be scheduled with the previous given parameters.
As a result, I have to run either with previuos selected parameters or need to input all prompts again, no way to change only certain prompts and keep the previous parameters for the rest.
In XI 3.1, the prompt parameters will be retained of that instance during reschedule and we can change certain prompts parameters as per our requirement and rest we can leave with the previuos parameters.
Is this the funcitonality or bug or any settings available to retain the prompt inputs.
Regards,
Ravi

"This happens only when I click the prompt icon on the schedule window, otherwise the parameters are retained and the report can be scheduled with the previous given parameters"
I test a WebI report with prompt on a BI4.1 SP05, and the Prompt's values are retained when reschedule and modify the Prompt. Can you check your BI4.x production version and let us know if this problem is replicated on your BI4.1 SP05 or above? Regards, Jin-Chong

I want to display parameters when i check check box

hi,
i want to display select options when i check check in the selection screen .
if the check box was not checked then those parameters should not be seen.

hi,
check this..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
parameterS: check1 as checkbox user-command US1.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME title text-001.
parameter : p_MATNR1 like MARA-MATNR modif id PRO.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN OUTPUT.
IF NOT check1 IS INITIAL.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'PRO'.
        SCREEN-INVISIBLE = '0'.
        SCREEN-INPUT = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'PRO'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
regards,
priya.
Message was edited by:
        Priya

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

Index of Values in the List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen for Month field. It has the values Jan, Feb, Mar....etc in it.
These entries, I added thru the VRM_SET_VALUES.
Now, I want to default the month to current month SY-DATUM+4(2).
Is there any FM to which I can send this SY-DATUM+4(2) as an Index and the corresponding value gets set for the Month field.
As an alternatvie, I could use Case Sy-DATUM+4(2). when '01'. p_month = 'Jan'. etc etc.. But I want to avoid this big case statement.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
Try to use the func MONTH_NAMES_GET.It will
return the month name along with the number.
And also you can directly select from table T247
Thanks&Regards,
Siri.
Message was edited by: Srilatha T

How to get a check box on the selection screen

Hi all
can any body tell me how to get a check box on the selection screen

parameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS ...... AS CHECKBOX ......
Parameter is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

GR55 Report Selection Parameters

Hi,
I want to add company code as one of the selection parameters. When I run the report group company code is not showing up as the selection parameter.
Please let me know if someone knows how to do that.
Thanks

GR52 enter the report group name. Click on Report.
If it is an SAP standard report, you won't be permitted to change. However you can copy that standard report to your own report (give a name to it).
Then, in GRR2, you can call the characteristics under the Edit>general data selection and include the company code.
Click on the second check box, meant for variable. Choose one from the drop down. Select a default company code variable (e.g 8A-bukrs for profit center related report under table GLPCT) for the table you are dealing with . Save and generate. and then include the report under a report group to run.

BOXI 3.0 Selecting "parameters" when rescheduling returns error in InfoView

Similar Messages

Maybe you are looking for