DUNS Number - Where to Store it?

Where is the correct place to store a DUNS number for a sold-to customer?
I am not seeing any pre-existing fields for the DUNS number.
We are using ECC 6.0
Moderator message - Cross post locked
Edited by: Rob Burbank on Jun 15, 2009 5:35 PM

Solved it!! :-)
In the UIX page I check for the proxy in the event result, if it is there I take it, otherwise I take it from bindingcontext. Is this the right way to do it? Here is the UIX code:
                        <hGrid id="pptoHGrid" alternateText="No items were found"
                               treeData="${bindings.bindingContext['tree']}">
                          <boundAttribute name="proxy">
                            <if>
                              <comparison type="equals">
                                <null/>
                                <dataObject default="${uix.eventResult.hGridProxy}"/>
                              </comparison>
                              <dataObject default="${bindings.bindingContext['hGridProxy']}"/>
                              <dataObject default="${uix.eventResult.hGridProxy}"/>
                            </if>
                          </boundAttribute>Greets,
Fernando

Similar Messages

  • Where to store the DUNS number

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
    Thanks,
    Chetan Shah

    if you can briefly describe the steps, it could be of help to some one

  • Where to Store D&B # (DUNS) on customer master record

    Hello,
    I've been trying to find a field to store the Dun & Bradstreet (9 character DUNS #).  I had heard there was a field available in R/3, but can't find it anywhere so I might have heard incorrectly.  After doing some searches I can only find the field available on the BW system.  I also came across a field on the vendor record but that's not going to be helpful either.
    Is there a field to store a DUNS number on the customer master record?  I'm on ECC6.
    Thanks,
       Jonathan

    Hi jonathan
    If you want to know where the data is getting is stored like customer changes (i.e. address changes, sold to another company, credit scores, etc...).Then go to sales area data ->environment->sales data and click on execute. System will show the tables and fields which have been changed and when they have been changed
    use t.code VC/2 for sales summary , may be this will help you
    Regards
    Srinath

  • Where to store DUNS # on a Sold-to Customer?

    Where is the correct place to store a DUNS number for a sold-to customer?
    I am not seeing any pre-existing fields for this.
    We are using ECC 6.0

    Hi,
    DUNS number is stored in KNKK- KRAUS for sold-to-party.
    You will find this field in credit management (trx FD32).
    Select Status under Credit Control Area Data. You will find Credit Info Number in External Data subscreen section. This Credit Info Number is used for DUNS Number.
    Hope this will help you out.
    Regards,
    Vijay

  • Multiple Enterprise Accounts using single DUNS number

    We are a parent company with a couple of subsidiaries who would like to release iOS titles under their own company name.
    From what I understand, to release an app to the App Store that has the subsidiary company name listed we would need a developer account for each subsidiary.
    If we apply for a DUNS number for the parent company, is it possible to then create several enterprise developer accounts for each subsidiary but submit the DUNS number for the parent company?
    Thanks!
    Nick

    hi The Kid!
    here's a bleeding-edge hack along those lines ... unsupported, no guarantees of success on a 6.0.x, etc, etc ...
    MacMuse, "Multiple users on one PC" #1, 02:14pm Sep 5, 2005 CDT
    love, b

  • The Duns Number is Invalid error when importing Supplier Sites

    Hi All,
    In my data file I have a field DUNS no,
    with values
    14
    15
    16
    When I insert into interface table and run the open interface, i rejection mesage as The Duns Number is Invalid.
    When we create a supplier in front end in R12 even if we enter a value like 14 it will concatinate it with zeros and show it when we query.
    The duns number column in interfac table is of Varchar, but in hz_parties for duns_number we have two columns duns_number and duns_number_c
    where in next one the actual duns number is getting concatinated by some string like XXOPU - 0034, actual duns number is 34.
    How to handel this in my validation program.
    Please let me know the solution.
    Thanks.
    Edited by: 834095 on Jul 17, 2011 11:26 PM

    Yes,
    I got some help from this link
    Supplier ---> DUNS_Number issue while writing the supplier script
    Just trying in that way.

  • DUNS number of our suppliers in the vendor master???

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
    Thanks,
    Chetan Shah

    Dear Chetan Shah,
    You can use the Business Add-Ins (BADI) VENDOR_ADD_DATA_CS and BADI VENDOR_ADD_DATA for processing enhancements in the vendor master record.
    You use the BADI VENDOR_ADD_DATA_CS to integrate your own subscreens in
    the standard dialog. You can process your own data (add-on data) on these subscreens.                                                      
    Hope this will help.
    Regards,
    Naveen.

  • Field related to DUNS number in the vendor master??

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC6.0.
    Thanks,
    Chetan Shah

    Hi
    DUNS Number----related to DUNNING
    Mapping of XI party Duns# to R3 Vendor Codes
    DUNS
    Re: HTTP Adapter and DUNS scheme - possible bug ?
    Please refer the below links for reference.
    http://en.wikipedia.org/wiki/European_Article_Number
    http://en.wikipedia.org/wiki/DUNS_NUMBER
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40acc490-0201-0010-be97-bebc4e7eaabf (Refer frm Pg:11)
    <b>Reward points</b>
    Regards

  • DUNS number in vendor master

    Hi,
    We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide me with some info? We are on ECC5.0.
    Regards,
    Ed

    hi,
    field lfa1-kraus ->External number as a reference for a credit agency (for information only).
    rgds
    Boris

  • Implement B2B Trading Partner scenario using DUNS Number

    Hi,
       I have a requirement where in we have to send XML to different external Partners. The external Partners are identified based on the DUNS number. Also these external Partners would be sending us the data and depending upon the Partner we have to invoke corresponding service. I need your inputs on how to design this scenario using Party, Business Service and Sender Agency Duns and Receiver Agency Duns.
    Thanks
    Rajeev Gupta

    hi,
    these might give info about creating party and services
    /people/shabarish.vijayakumar/blog/2006/09/08/b2b-and-the-hype-about-the-party
    /people/shabarish.vijayakumar/blog/2006/09/13/wanna-party
    http://help.sap.com/saphelp_nw04/helpdata/en/da/7a2f41b239a831e10000000a1550b0/content.htm
    and this is nice document
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/xi/how%20to%20set%20up%20an%20xi%20integration%20directory%20scenario%20with%20party%20to%20support%20edi%20partner%20processing.pdf
    and you said you need to invoke the services depending upon the data ,what services are they?
    babu

  • Duns number update in Sourcing

    Hi,
    We have around 1500 vendors ( Supplier) in CLM system version 9.0.
    Few are having Duns number around 10% remaining are not having empty in Duns number
    field.
    However in ECC system now the Duns number are updated for around 80% of the vendors.
    Now how do i make the changes in CLM system. ie updating the duns number for the suppliers in CLM.
    It will be great if step by step details.
    Thanks in advance.
    With Regards
    Divaka V

    Hi Divakar,
    Please prepare the workbook in which maintain below 2 fields:
    EXTERNAL_ID,DUNS
    Where EXTERNAL_ID is the external id of the supplier and DUNS is the value which you want to update.
    Prepare the workbook and go to Setup-->System Administration-->Import Data-->New
    and the upload the workbook which you have prepared. in the next screen select the Object Type as supplier and click next.
    Wait till the import finishes. DUNS of all the supplier will be updated in the SCLM System.
    Hope it helps. If you want I can mail you the sample workbook.
    Let me know if you have an doubt.
    Regards,
    Kushagra A

  • How do I change the phone number where sms is sent to activate keychain?

    How do I change the phone number where sms message is sent to activate Keychain?  It keeps sendingit to an old phone #, and is most frustrating!

    System preferences > iCloud > Keychain > options.

  • I have my iphone activated and working since 3days, i purchased it from ebay with 1year warranty, when i check the serial number from Apple store at Bangalore Forum mall, they say that it does not show anything and 'OUT OF WARRANTY'.

    I have my iphone4 activated and working since 3days, i purchased it from ebay with 1year warranty, when i check the serial number from Apple store at Bangalore Forum mall, they say that it does not show anything and 'OUT OF WARRANTY'.
    Now i have a problem in it, all icons just shake and system hangs, needs restarting.

    You need to go back to the person you bought it from. Sounds like they may have sold you phone that is not as described.
    Did you check the warranty status before purchasing it?

  • I have a file where I store my download music. When I click on "add music" to my ipod my music file opens, but rather than have to drag one song at a time to my ipod, how do I copy the entire file at once to my ipod. - steve

    Hi - I have a file where I store my downloaded music. When I plug in my ipod and click on "add music" my file appears. Rather than drag one song at a time, how can I download the entire list at once? - steve

    I am not doing it in ITunes, but i did down load the song from ITunes.  I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format.  However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there.  I can click on the song and it will play in Windows media on my work PC.  I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files. 
    Thanks for your help, Mel

  • Where we store in sap r/3

    Dear sir  we can uploaded old data in sap r/3. by lsmw and bdc. but where we store.
    thanks regards
    jitendra

    Hi,
    LSMW - Helps to transfer data from legacy system to SAP either one time or periodically.
    Steps -
    1. Import data (legacy data in spreadsheet tables and/or sequential files)
    2. Convert data (from source format to target format)
    3. Import data (into the database of the SAP application)
    a. Maintain Structure relations, field mapping and conversion rules.
    b. Data from legacy system is read
    c. Based on step a, the data gets converted
    d. The converted data is imported to R/3 system based onBatch input processing or Direct Input or through IDOC Inbound processing
    Regards,
    R.Brahmankar

Maybe you are looking for

  • How can I get the Cover Flow text to be in all caps

    I've only had one problem with the Cover Flow application for iTunes. All of my track names, artists, and album names are in caps on my library. When I switch to the Cover Flow view some songs are displayed with all caps, while others have the song a

  • Java Plug-In 1.4.1 Crashes in Win2000 IE6.0.2600

    Hallo Please can somebody help with information on why the Java Plug-in ver 1.4.1 just crashes when I try to run an applet under windows 2000 Professional using IE6.0.2600. Also I cannot run the Java Console nor the Java Plug-in Control panel, all of

  • SSRS 2008: connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError)

    Hi, I have started getting this error since a week now when I try to schedule a report or change a schedule of a report.  An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition with

  • How to get acknowledgement from the receipent

    hello experts, i am using the function module SO_OBJECT_SEND for sending the mail, now i have the requirement that i should get the acknowledgement if the mail is received by the receipent, i used the check "receipients-deliver = 'X' " but i didnt go

  • Cannot start RSA1

    Hello, I cannot execute RSA1. I get error message when trying to execute it: I recently performed a client copy, but since RSA1 couldn't be started in the new client (error message "cannot use this client") I ran function module RS_MANDT_UNIQUE_SET