Duplex printing for last 2 pages only

A customer has an invoice report where they want the terms and conditions (which are 2 pages) duplexed while the report itself is not printed that way. Any ideas if this can be done using native SSRS?
Sherry

I am not sure this will work or not, but you could embed the printer code for duplex printing into your stream.
For HP printers:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-bpl02705-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken#top
Simplex/Duplex operation
NOTE: This is only
applicable to duplex capable printers.
Function
Parameter
Command
Decimal Value
Hexadecimal
Value
Simplex Print
Simplex
Ec&l0S (s)
027 038 108 048 083 (115)
1B 26 6C 30 53 (73)
Duplex Print
Long-Edge Binding
Ec&l1S (s)
027 038 108 049 083 (115)
1B 26 6C 31 53 (73)
Duplex Print
Short-Edge Binding
Ec&l2S (s)
027 038 108 050 083 (115)
1B 26 6C 32 53 (73)
Long-Edge (left) Offset Registration
# of Decipoints (1/720")
Ec&l#U (u)
027 038 108 #...# 085 (117)
1B 26 6C #...# 55 (75)
Short-Edge (Top) Offset Registration
# of Decipoints (1/720")
Ec&l#Z (z)
027 038 108 #...# 090 (122)
1B 26 6C #...# 5A (7A)
Page Side Selection
Next Side
Ec&a0G (g)
027 038 097 048 071 (103)
1B 26 61 30 47 (67)
Page Side Selection
Front Side
Ec&a1G (g)
027 038 097 049 071 (103)
1B 26 61 31 47 (67)
Page Side Selection
Back Side
Ec&a2G (g)
027 038 097 050 071 (103)
1B 26 61 32 47 (67)

Similar Messages

Duplex printing is odd pages only

printer is printing only odd number pages for duplex printing

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen? Do you have an automatic duplexer? Is it enabled as discussed here?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Footer should be print on last page in multiple page format

Hi expert,
I designed form for invoice print ,in that for multiple pages footer should be print on last page only and hight of the main window should be increase (means if footer will display on last page then space of footer should be used for main window in multiple
page format)
for eg .if i have 12 item so 5 items displyed on each page but i want to print 10 item on first page and remaing on second and after that i want to print footer.
Regards,
Jyotsna

Hi,
Has you tried to create a "new page" copy of FIRST, and make it the LAST_PAGE... On it you are going to create the desired footer.
The Page Secuence will be something like this:
If you are trying to print 12 items, then PAGE 1 (10 items) -> LAST_PAGE (2 remaining items).
Hope it helps you...
Alexis Sanchez N.
SAP ABAP Development Consultant
Molen Services and Consulting, C.A.

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

How to print header in first and last page only in SAPSCRIPT

Hi!
How to print header in first and last page only in SAPSCRIPT,
in between pages, I need to print all line items in MAIN window only .
Thanks in anticipation!
Aki.

Hi All,
Thanks for your early update...but my requirement here is
I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
hope you this will clear you.
Thanks!

Photosmart C6380 only prints the last page in documents

My printer only prints the last page of multi page documents. To choose more than one page in a page interval in the print menu does not help, but it is possible to print all pages in a document if I only print one page at a time which takes forever for longer documents. I use Windows 7 64 bits and it used to work until the end of 2011. If I uninstall drivers and reinstall, it sometimes work for a short while and then the problem comes back. All my drivers are updated and I run the printer on wifi.

Just to add some information: I do not get any error messages, blinking lamps or anything like that. I've got the same problem independent of file-format as it seems. I have tried word-files, pdf-files and to print from the web browser Explorer.

Problem with variable in last page only context

Hi,
I am using a variable to sum the amount. And i need to print that variable in the footer of last page. I am using last page only context command(<?start@last-page-first:body?><?end body?><?call:footer_template?>) for printing the footer table in last page.
Can i access the variable in last page only context. Its giving error for me. how can i access that variable.
Thanks in advance.

Yunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra

Can I print the last page of a PDF document using command line?

Hi
I am in a situation in which I constantly have to deal with multiple PDF documents and I need to print the last page in each of these, and ONLY the last page. The total number of pages will vary for each file, so the page number for the last page will also vary.
I would really prefer to not do this manually, by opening up each file in the visible Adobe Reader window and then print.
Question:
Is there a way with Adobe Reader (maybe with the help of some other Adobe product) to print only the last page of a PDF document using some kind of command line without opening up the PDF file in the visible Adobe Reader window?
I'm using Windows.
Thanks in advance,
Regards,
Emil

Thank you for taking the time to reply.
I tried both ways and neither works. It gives me a prompt box that I have to click "next" for every page but after going thru all pages, nothing is sent to the printer.
Also, all directions I've read indicate it will print to the default printer. If my default printer is on a network, will that cause problems....
and...
should I be getting a prompt box on every page? I thought all this would happen behind the scenes and not force me to interact with every page.
dc

Is there any "skip page count" command for last page?

Hello,
May I know if there is a command(such as even-skip-page-count) specifically for the document last page?
I have a requirement where PO/Invoice T&C should be printed at the back of the last page only.
The blog of Tim (http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html) covers
only odd/even printing.
Thanks in advance.
Rownald

nagornyi is correct.
i will just expand a bit on the use but it can be found in the documentation.
you will need to add a section break to the last page of your report
and also remember to add the header information of you report.
I may be wrong but when I left the header info out it was not printing.
header information goes above the tags and footer(totals and stuff like that) below the tags
Edited by: tarmenel on Feb 26, 2009 9:02 AM

Duplex printing for LaserJet Pro 1100

Directions for manual duplex printing for LaserJet P1102w

Since this is not an auto duplex printer, you will need to go into your printer properties and set the allow manual duplex check box. Once you have set it there it will duplex all the time.
Start menu >Device and Printers Folder > Right click on the printer > choose printer preferences > finishing tab (I think that is what it is called, if not look for the tab that has...print on both sides (manually) or allow manually duplexing (Sorry, I don't have this printer hooked up to a test box or I would get you a screenshot )
If you want to only duplex certain jobs, then you can do this through the application at the time you pick your printer by selecting printer properties (located under your printer selection button) and setting it for only that one job.
Open application > File > Print > Printer Properties > finishing tab (steps are the same as above)
Just remember...
Box checked = duplex (default option so this should already be set unless you have unchecked it)
Box unchecked = not duplex
Last word of caution on these instructions...you may have some variation as I am going off my memory here....my printer is not hooked up.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Adobe PDF printer and "Start printing after last page is spooled"

Hi,
After calling the Belgian Support for Adobe Product, I'm trying to have some information here.
Hope to get some help.
We use acrobat pro XI on windows 7 client and when we print a test page with the "adobe pdf" print queue on network share, we get a printing error when the "start printing after last page is spooled" is selected in the advanced tab of the printer queue. (document is not generated, and stay in the spooler with an error).
This problem is not present if printed localy or when we use the "start printing immediately" or "print directly to the printer".
The support agent from adobe Belgium told me that the reason is generating adobe pdf on network share is not a supported operation. We have to save the document localy all the time.
Is it really an answer from Adobe ?
Do you have an other explanation ?
Thanks for your help,

Thanks for your very good explanation Dov.
We use Adobe livecycle for this kind of purpose.
The situation described is diffrent, but you completely repond and I will be able to have some element to find a solution.
In fact, I'm implementing a softwate called DeviceLock, used to control connected devices (usb, network, drive). But this software, once installed, change the local printer parameters from "print directly to the printer" to ""start printing after last page is spooled".
As we use redirected folder in our environment and users cannot use local drive (for user's data backup) you will understand the problem.
Of course, we should be able to force the correct settings back, But Devicelock seem to change this settings after policy refresh.
I have contact with Devicelock about this problem of course as their software modify the settings, but was looking for a reason why we were not able to use the "start printing after last page is spooled" parameters with adobe Printer.
Thanks for your explanation,
PS:The driver's dialog won't prevent you from setting “Start printing after last page is spooled” or “Print directly to the printer” but setting either of those options will cause the operations to fail as you note.
note that only "Start printing after last page is spooled" cause an error and this, only for network share location. The "print directly to the printer" or the "start printing immediately" work fine either on a local drive and a network share

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

When I print, a last page is printed with a summary of document printed - file name, directory, ...

When I print, a last page is printed with a summary of document printed - file name, directory, ... Just got Windows 8. Is this something I can stop? Waste of paper and ink!!

Hi RebeccaQ,
Generally speaking, a summary page, document summary or document properties page is often generated based on a setting in the software application being used as opposed to the printer driver or menu setting. For example, in MS Word you can select to print this page with each printed document. In this case, depending on your version of Word, you can enable/disable the feature often in "Word Options", "Display", "Printing Options", "Print Document Properties".
Does this help? If not, which printer model and software application is being used when the summary is printed?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC using windows 8?

Thanks for your reply.
Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
Drive productivity and save paper, using automatic two-sided printing

Duplex printing for smartform

Hi,
Has anyone worked on Duplex printing for smartform? If yes, please tell me the procedure/steps that need to be taken for the same.
Thanks
Regards

Hi,
You can select Duplex printing in th epage properties of a page (D = Duplex)
The printer STARTS duplex printing from that page. This means that the printer triggers a pagefeed on that exact moment and starts printing on a new page. So when you have 1 page that stretches over more that one sheet of paper this means trouble. after every page the flow of the program starts a new Duplex print (thus feeding the current sheet and starts at a new page) this results in a new sheet of paper every page. this is not what you want.
You can solve this by creating 2 pages and set their respective NEXT PAGE to each other. Page 1 you set to DUplex, pagae 2 you leave blank..
But notice that when you select duplex printing most (if not all) printers start printing on the backside of the paper. When you use pre-printed (logo) paper, you will find that it prints the front on the back etc.
This can sometimes be corrected (if needed) by sending prescribe commands to the printer directly.
Good luck!
Joris

Duplex printing for last 2 pages only

Similar Messages

Maybe you are looking for