Duplicate addresses for the same contact in Address Book.

For many of my contacts, there are duplicate addresses.  When I delete one of the addresses, both of them disappear.  Pretty funky.  Anybody else see this type of thing?

Hi,
Pls go to, Enterprise mangaer --> Monitoring -> incident --> Search for the target and  select as "show all"  will give you alert details.
Enterpise --> Monitoring --> Incident Manager: Search -->
Last updated : Date Range:< >
Target Name : D B NAME
Target Type:<DB TYPE>
Include members             : Target and all  member
Status : Show both open and closed
Supressed : Show all
2)Please verify your notification setup
Setup --> Incident Rules => Select your rule(will be in the alert) -->edit --> Select the event --> NExt --> Add actions --> edit
Repeat Notifications
Both basic and advanced notifications can be sent repeatedly. The repeat notifications will stop only when one of the following conditions is met: The incident is acknowledged, the incident has cleared, or the maximum number of repeat notifications has been reached. Repeat notification is not supported for corrective action job status updates and causal analysis status updates on events.
  Send Repeat notifications  --> Enabled?  if is enabled then  u will get repeated notification.
OR if you set the frequency like 15 mins , 5 notification then u will receive  5 on every 15 mins if the alert persists.
Regards
Krishnan

Similar Messages

  • Can i send to multiple email addresses for the same contact

    I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed.  Can I send email to multiple email addresses listed inside the same contact?  I hope this makes sense.
    Thanks!

    You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
    For each group, select one address or the other for each contact. Do the same for the other group.
    When you address an email, add both Groups to the address field in Mail.

  • Managing multiple email addresses for the same contact

    Hi
    I have set up a group so I can email multiple people at once using the usual method. However, when I put the 'xx group' in the Bcc, it mails them fine, but where I have more than one address for the contact, it picks one without asking me.
    How do I set it so it always chooses a certain (main) address? For one, it sent it one of two addresses I had listed as 'home', on another it sent it to an address I had listed as 'work'.
    They also appeared in different positions on the card, e.g. it is not sending tit to the first one it sees on the card.
    Any thoughts?
    Thanks
    Mark

    found the answer somewhere else:
    When sending a message to a Group and a Group member (or members) has multiple email addresses, the following was copied from Address Book Help.
    Choose Edit > Edit Distribution List.
    Select the group whose addresses you want to manage.
    Click the pop-up menu (column header) to choose which type of information you want to manage—phone number, email address, or street address.
    Select the address or phone number you want to use for each member with multiple addresses or phone numbers.

  • HT204150 How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact?  Or at least change it for the autofill information?

    How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact?  Or at least change it for the autofill information?
    Perfernece for contact to change.  Do I just have to dis-associate my contact fromt the facebook account?  Is only the autofill changable?

    If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
    They didn't fix this in iOS 8.
    There are two ways to remove the @facebook.com email from your contact info:
    If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
    If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.

  • Multiple address for the same customer code

    Hi,
    Suppose we have a customer name XYZ LTD whose sap code is 123.
    Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the invoice.
    Is it posible if yes then let me know.
    Thanks in advance.
    Regards,
    SATYA

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • Multiple shipping addresses for the same supplier (depending on the symbol)

    Hello ,can we set up multiple shipping addresses for the same supplier (depending on the symbol)?
    .& How..
    Thanks

    a delivery adedress has nothing to do with a certain supplier, except you are talking about subcontracting (do you?)
    a delivery address specifies an address where you want the supplier to send the goods to.
    if it is a third party PO, then the delivery address is derived from ship-to partner of the sales order.
    in case of a standard order to stock, the delivery address is coming from the storage location address (if maintained). if no storage location address is maintained, then SAP takes the address from your plant.
    You can manually add a delivery address in MEAN transaction and then manually assign in POs delivery address tab.
    here you can as well take the address from any address already in your system (e.g. any customer or vendor).

  • Alternate Address for the same Vendor Code.

    Hi,
    Can we maintain Alternate address for the same vendor code, if yes how can we maintain that?         Plz. explain me.

    Partner function also..u may have to create a new vendor code with new address...
    https://www.ucflex.uc.edu/help/nav/accounts%20payable/course/vendor%20master%20data%20maintenance/file178/index.htm

  • E4200 v2 - Uses multiple MAC addresses for the same device

    This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
    After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
    Seems the V1 had the same issues that they did not fix on this.
    The Cisco connect software shows 5 devices the Web based utility shows 3??.
    Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

    I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
    Secondly, may I  know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

  • Marking duplicate opportinities for the same project

    Hi
    Can we mark duplicate opportunities for the same project??
    Regards
    Aakshi

    Hi,
    Pls go to, Enterprise mangaer --> Monitoring -> incident --> Search for the target and  select as "show all"  will give you alert details.
    Enterpise --> Monitoring --> Incident Manager: Search -->
    Last updated : Date Range:< >
    Target Name : D B NAME
    Target Type:<DB TYPE>
    Include members             : Target and all  member
    Status : Show both open and closed
    Supressed : Show all
    2)Please verify your notification setup
    Setup --> Incident Rules => Select your rule(will be in the alert) -->edit --> Select the event --> NExt --> Add actions --> edit
    Repeat Notifications
    Both basic and advanced notifications can be sent repeatedly. The repeat notifications will stop only when one of the following conditions is met: The incident is acknowledged, the incident has cleared, or the maximum number of repeat notifications has been reached. Repeat notification is not supported for corrective action job status updates and causal analysis status updates on events.
      Send Repeat notifications  --> Enabled?  if is enabled then  u will get repeated notification.
    OR if you set the frequency like 15 mins , 5 notification then u will receive  5 on every 15 mins if the alert persists.
    Regards
    Krishnan

  • How can I differentiate between iPad and iPhone iMessages for the same contact?

    I have my sister in law's email and phone number all in the same contact. She iMessages me from both her iPad and her phone. They come up as two different iMessage conversations, but they both are under her name. When I go to text her I don't know if I'm sending it to her iPhone or iPad. Anyone know if there's anyway to differentiate? Sometimes looking at what was previously said in the conversation helps but I can't always remember (nor do I know which device he was messaging me from in the previous convo). Thanks all

    Try scrolling to the top of the conversation and tapping Contact.  You will then see the originating address highlighted in blue on the contact.  If the iPad and iPhone are creating two different conversations, chances are if the email address is highlighted it's coming from the iPad; if the phone number is highlighted it's coming from the iPhone (although not necessarily).  To know for sure you would have to ask her to check Settings>Messages>Send & Receive and tell you which is checked under "Start new conversations from" on both devices to know for sure.

  • Duplicate pages for the same artist

    Hi, In the Indian Classical instrumental music there are two artists with duplicate pages due to slight variation in name or spelling. These are Hariprasad Chaurasia, Pandit Hariprasad Chaurasia Pandit is a title. These should be combined so all albums show up together. Shivkumar Sharma, Shiv Kumar Sharma Here the first name has been split. These should be combined so all albums show up together. Thanks for an awesome music service with great features! regardsDushyant

    siobbahnnyc wrote:
    For some iPods, they just can't seem to reconcile the different file formats, and you end up with duplicate entries of the same artists. That has been my problem and have had to learn to live with it. 
    I've not had that problem.
    The usual reason why an artist appears several times is because of spelling differences, capitalistion, or guest artists.
    For example, "Dire Straits" and "Dire straits" may appear together in your iTunes Library, but become separate entries on the iPod. "The Clash" is different to "Clash, The".
    If one track on an album is listed differently to the rest, say as "The Clash featuring a guest artist", then this too would be listed separately to "The Clash".  The usual fix for this is to add the featured artist to the track name and remove it from the artist's name.
    The hardest one to spot is stray spaces after a band name . You can see the one I deliberately put in at the end of that last sentence, but it's not so easy in the Artist field, where full stops (period) are not used.
    An easy tip is to copy the artist name from one track, and paste it into all the others by that artist. Then Sync the iPod with your Library for these changes to take effect on the iPod.

  • Duplicate AVDoc for the same PDDoc

    Is it possible to duplicate an AVDoc and show it in an external Window? According to API Reference, Starting with Acrobat 7.0, it is possible to have multiple windows open on the same document. But I found no API that can do that. If I use AVDocOpenFromXXX() to create a new ADDoc for an opened PDDoc, I get always the same AVDoc returned.
    Alternatively, I can simulate a MenuItem NewWindow button click to create a second AVPageView for the same PDDoc and put it into an external window. However, in this case, Abode Acrobat treats it like the one created within the application. The external window is listed as MenuItem under Menu Window. Also, I get problem, if I click Revert MenuItem.
    Does Adobe PDF library provide a solution on this issue? Can I you IAC to cope with this problem?
    Im developing a Plugin with SDK 8 for Acrobat 8.
    Thanks.

    Hi Leonard,
    External Window is a MS Window outside the Acrobat application window. Acrobat standard plugins: Pan and Zoom Window and Loupe Tool are able to open such kind of window based on the origin PDDoc.
    The example External Window given by Adobe opens a new PDF (that was not opened) in an external window. If a PDF is opened, you cannot show it in another window again, for AVDocOpenFromXXX() returns always the same view.
    With the workaround: MenuItem New Window, I can get several views of the same PDDoc and thus show a PDF in different windows including in an external MS window. But Acrobat and external windows interfere with each other: Acrobat lists all opened external windows in system menu; if you press revert button, the external windows will be closed.
    I want to open several external windows based on the same PDDoc. They have the style like Pan and Zoom Window.
    Regards

  • Duplicate records for the same computer

    I have recently deployed SCCM 2007 SP1 with R2 for a customer.  We are currently in the process of deploying imaging and are having an issue with duplicate computers showing up.  The duplicates appear to be for the same computer.  I have read everything I can on duplicate computers showing up, but none of it has helped.  Basically, we have our base image, which is just a basic install of XP SP2 with all updates.  We lay down the image on a clean computer using an OSD task sequence, and when the machine shows up in the all systems collection, there are two records for it.  The current one is called SCCMTEST01.
    The first record shows the following:
    Name: SCCMTEST01
    Resource Type: System
    Domain: OURDOMAIN
    Site: 001
    Client: Yes
    Approved: Approved
    Assigned: Yes
    Blocked: No
    Client Type: Advanced
    Obsolete: No
    Active: Yes
    Properties:
    Agent Name[0]: MP_ClientRegistration
    Agent Name[1]: Heartbeat Discovery
    The second record shows the following:
    Name: SCCMTEST01
    Resource Type: System
    Domain: OURDOMAIN
    Site: 001
    Client: No
    Approved: N/A
    Assigned: Yes
    Blocked: No
    Client Type:
    Obsolete:
    Active:
    Properties:
    Agent Name[0]: SMS_AD_SYSTEM_DISCOVERY_AGENT
    Agent Name[1]: SMS_AD_SYSTEM_GROUP_DISCOVERY_AGENT
    The first one appears to be the active one, since it includes more information and the client is listed as installed.  Does anyone have any suggestions on what might be misconfigured?
    thanks,
    Justin

    I'm experiencing the same behaviour as described above. Not using any other OS distribution methods than scripted installation from RIS, will obviously make explanations based on OS Deployment behaviour not applicable in my case.
    The thing is that an object being discovered by Heartbeat, MP_Registration, SMS_AD_SYSTEM and SMS_AD_SYSTEN_GROUP... until suddenly, SMS_AD_SYSTEM_GROUP discovery agent starts generating a new object and updates that object from the moment on. Heartbeat from the client still updates the original object. This is done for about five object a day (among 2600 alltogether), and it's not the same computers that do this (apart from some, troublesome clients...).
    When finding this duplicate object, I have kept the one generated by SMS_AD_SYSTEM... and then reinitiated a Heartbeat Discovery on that object. Doing this will make Heartbeat to update the new object (now the original is gone), and everything seem to work for a while, although I have to manually approve that object again.
    I cannot work out what makes SMS_AD_SYSTEM... generate a new object.
    Does anyone have an idea?
    /Jakob

  • When importing my address book from Outlook why do I have multiple entries for the same contact?

    I have an address book and it contains one list in Outlook. I just downloaded Thunderbird and imported my address book. The address book and one list imported very easily but there are anywhere from 3-5 entries for each person in my contacts. If I delete the extras they are removed from my list as well. Why are there multiple listings for each contact and how can I remove the duplicates without losing my list entries?

    as I was looking thru pictures in my finder I noticed there were several copies of the same pictures I had taken yesterday. I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash, then I thought I'd look it up when I realized its not just these pics, but very many had een stored in groups of three or four.
    1. Why is that?
    Depends on where you saw them - If they were in the iPhoto library iPHoto has either two or three different versions (no duplicates) or each photos in its library - this is not optional and can not be changed  --  If they were not in the iPhoto library then you can do what you please with them and they have nothing to do with iPhoto - iPhoto is only involved with the photos in its library
    2. Why is it advised to NEVER make changes to the structure or contents of iPhoto in Finder?
    (as quoted Below)
    "I would suggest using one of the proven safe programs - if you are going to manually remove them be sure to remember that you NEVER make any chnages to the structure or contents of the iPhoto library using the finder - only make changes using iPhoto"
    Very simple - if you do you will destroy your iPhoto library and have to start over losing all work you have done in iPhoto - The iPHoto library is a SQLite database and there are NO user servicable parts in the iPhoto library and any changes made using teh finder will corrupt the database and cause dataloss
    Is that a good enopugh reason for you?
    So if these photos were in the iPhoto library when you
    I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash,
    You destroyed your iPhoto library and will either have to restore your backup from before you did this. put everything back EXACTLY like it was before or start over
    LN

  • Somehow I have two sign-in email addresses for the same iTunes account. How can I fix?

    I believe it started with Mobile me, but not sure. I have apps that I've downloaded using an old sign-in email address and apps that I've downloaded (to the same Mac) using the newer sign-in email. I can access iTunes with the newer address. But I often get prompted to input my old sign-in email address (and old password) when upgrading certain apps. It's very annoying. And now I've moved all my files to a new computer and it won't allow my apps from the old sing-in to sync without authorizing the computer first  (which it already is, but isn't recognizing as much with the old email address...).
    Help.

    I suspect what you have ended up with is two AppleIDs/accounts.  You cannot merge content.  Decide which one you want to use and use that one for future purchases.  For previous purchases you will have to make sure the other one is kept updated in terms of contact information and you will have to use it to access its content.

Maybe you are looking for