Duplicate global type definition/declaration

I'm getting an error while compiling that says that one of my xml types is declared in more than 1 location and that the type is different in both locations. It is declared in the schema file on my hard drive, and then somewhere on my server. The potential fix says
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
but I do not have a proxy server.
How do update the instance on my server so that it isn't different from the file on my hard drive?
Is that even the way to go about fixing the compiler error?

It looks like your local orsmds store and your server's oramds store are out of sync.
To be sure, check the differences in WorkflowTask.xsd file at the following locations
Local machine -->  "jdeveloper\integration\seed\soa\shared\workflow"
URL --> http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd
I am sure there must be a difference at the location mentioned in your original post.
Regards,
Vikrant Korde.

Similar Messages

  • Servicebus: error: sch-props-correct.2: Duplicate global type

    I have a problem creating Split Join on ALSB 3.0. The problem is that the the request message schema of Split join service contains the same type(element) that is defined in request message schema of service that I want to invoke in split join flow.
    It seems that it's inpossible to invoke a service that contains one ore more types that are already defined in request schema of split-join flow. When I build the flow following error comes up:
    "servicebus:/XMLSchema/project/Schemas/types/common/Person error: sch-props-correct.2: Duplicate global type: Person@http://company.com/common/person (Original global type found in file: null)" during type system creation prior to validation led to incomplete validation     project/SplitJoins     SplitJoin.flow     line 1     1208930966845     2118
    So I can't deploy the flow. Is there any workaround? Is this normal or is it a bug?
    Thanks.

    Sounds like a Workshop bug which I have seen before.
    A couple questions to pinpoint it:
    1. Are you use using either a BARE service (no operation name in the reqeust) or 2. are you using imports in your wsdl?
    If 2 then I think there is a patch.
    If 1, then like me, you may be out of luck.

  • ALSB 3.0 split join error: sch-props-correct.2: Duplicate global type

    Hi all,
    I take 'Invoke Service' node to call external service. i'll select the operation required. that time i'm getting the following error:
    "error: sch-props-correct.2: Duplicate global type: GetStateListRequestType@http://www.abcd.com (Original global type found in file: null)" during type system creation prior to validation led to incomplete validation.
    Is it a bug? any patch is available for this?
    Can anybody help if one has an idea on this?
    Thanks in advance,
    Ganesh
    Edited by ganeshgadi at 05/28/2008 6:24 AM
    Edited by ganeshgadi at 05/28/2008 6:25 AM

    Sounds like a Workshop bug which I have seen before.
    A couple questions to pinpoint it:
    1. Are you use using either a BARE service (no operation name in the reqeust) or 2. are you using imports in your wsdl?
    If 2 then I think there is a patch.
    If 1, then like me, you may be out of luck.

  • Global Type declaration/definition are duplicated

    Hi,
    I am migrating my components  from Solution accelerator 111150 to 111181. I have modified the names spaces for task and removed the references of workflow.xsd and replaced it with "oramds:///soa/shared/workflow/WorkflowTask.xsd". I am facing the issue of duplicate declaration/ definition
    Error: Global Type declaration/definition of name '{http://xmlns.oracle.com/bpel/workflow/task}systemAttributesType' are duplicated at the following locations:
    oramds:///soa/shared/workflow/WorkflowTask.xsd [line#: 248]
    http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd [line#: 238]
    There are at least two of them looking different:
    oramds:///soa/shared/workflow/WorkflowTask.xsd [difference starting at line#:345]
    http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd [difference starting at line#:334]
    and below that there are numerous errors. I believe those are due to this first line. where am i going wrong?
    Regards.

    It looks like your local orsmds store and your server's oramds store are out of sync.
    To be sure, check the differences in WorkflowTask.xsd file at the following locations
    Local machine -->  "jdeveloper\integration\seed\soa\shared\workflow"
    URL --> http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd
    I am sure there must be a difference at the location mentioned in your original post.
    Regards,
    Vikrant Korde.

  • Global Type declaration/definition of name duplicated error

    Hi, All,
    We have two EJB exposed as the Webservice , so WS-1 and WS2, When I insert these two WS into the SOA Application to used by BPEL process. I get the compile error from jdev(11.1.1.1.3) like this:
    Global Type declaration/definition of name '{http://mynamespace-here/oracle}SearchParameter' are duplicated at the following locations:
    EJB WS1 xsd line ***
    EJB WS2 xsd line ***
    SearchParameter is bean SearchRequest‘s property, this bean is shared using in two EJB method interfaces.
    Our class design like this:
    @XmlRootElement
    @XmlType(name = "SearchRequest",
    namespace = " http://mynamespace-here/oracle ")
    public class SearchRequest
    implements Serializable
    private SearchInterface searchCriteria;
    @XmlElements(value =
    { @XmlElement(name = "SearchParameter",
    type = SearchParameter.class) })
    public SearchInterface getSearchCriteria()
    return searchCriteria;
    At here SearchInterface is an empty interface and SearchParameter is a class implement this interface.
    I feel @XmlElement in fact cause this duplicated error.
    So in this case, how can we expose this SearchInterface/SearchParameter through the XML properly?
    Thanks .
    wayne
    Edited by: user782942 on Feb 8, 2011 11:37 PM

    If the message type in the external service and the one using in your local are using the same schema, could you check whether the external service has changed the schema in any way? Adding new fields, changing the field name, or changing the namespace? We had faced this issue before, and it was because the schema in our mds is different from the schema from OSB, which they changed it after we get the artifacts and we didn't have the updated schema in our mds.

  • "Global Type declaration duplicated", cached xsd conflicting in jdeveloper?

    We're having problems recompiling a project after changing a schema in a second project on which it depends:
    Our HR composite app imports a schema from our FaultHandler app. I added 2 new elements to the FaultHandler schema and redeployed to the server - now our HR composite app won't recompile. It errors saying:
    [scac] error: in EmpTransformSynch.bpel(87): query "/ns9:HandleFaultRequest/ns9:TimestampeInit" is invalid, because Global Type declaration/definition of name '{http://mydomain.com/SOA/FaultHandler}HandleFaultRequestType' are duplicated at the following locations:
    [scac] http://mydomain.com:8001/soa-infra/services/default/FaultHandlerProject/xsd/FaultHandler.xsd [line#: 4]
    [scac] http://mydomaincom:8001/soa-infra/services/default/FaultHandlerProject/FaultHandler?XSD=xsd/FaultHandler.xsd [line#: 7]
    [scac] There are at least two of them looking different:
    [scac] http://mydomain.com:8001/soa-infra/services/default/FaultHandlerProject/xsd/FaultHandler.xsd [difference starting at line#:16]
    [scac] http://mydomain.com:8001/soa-infra/services/default/FaultHandlerProject/FaultHandler?XSD=xsd/FaultHandler.xsd [difference starting at line#:19]
    I can view the 2 URIs in my browser, and while they differ slightly in how they reference another schema, the schemas (and imported schema) are semantically equivalent.
    We've taken the following steps to try to resolve it:
    Undeploy the previous revision of Fault handler
    Restart soa server
    Redepoy Fault Handler
    Clean HR app
    Make HR app
    We have the issue in both jdeveloper 11.1.1.3.0 and 11.1.1.4.0
    This is surely something very simple, but it's blockiing us at the moment.
    Any help much appreciated.
    ..Garret
    Edited by: user10714498 on 09-Mar-2011 02:27

    If your schema contains any characters which will be escaped when parsed by a browser, then version present in the actual .xsd and the version referenced via HTTP server will be different causing the issue.
    If you can post the content of your actual schema (as you see it in jDev and not the one opened in the browser) here it will help identifying the issue if any.

  • Declaring type definition dynamically

    hi guys,
    i have a strange issue. i need to define a varaible that refers to a below type definition.
    types : begin of t_str,
            var1 type string,
    vcar2 type string,
    end of t_str,
    data:  variable type t_str.
    the problem is i do not know how many var's will be there until run time. so my type definition needs to be dynamic. is there any way to do it.
    thanks

    You can create a dynamic structure like this.   <fs_structure> will be the structure with 20 string fields.
    TYPE-POOLS: abap.
    DATA:
      lr_structdescr    TYPE REF TO cl_abap_structdescr,
      lr_datadescr      TYPE REF TO cl_abap_datadescr,
      lt_components     TYPE abap_component_tab,
      ls_component      TYPE LINE OF abap_component_tab,
      lr_struct         TYPE REF TO data.
    DATA: lv_index_num(3) TYPE n.
    DATA: lv_index_char(3) TYPE c.
    FIELD-SYMBOLS: <fs_structure> TYPE ANY.
    START-OF-SELECTION.
      DO 20 TIMES.
        lv_index_num = sy-index.
        lv_index_char = lv_index_num.
        CONCATENATE 'value' lv_index_char INTO ls_component-name.
        ls_component-type ?= cl_abap_elemdescr=>get_string( ).
        INSERT ls_component INTO TABLE lt_components.
      ENDDO.
    * get structure descriptor -> lr_STRUCTDESCR
      lr_structdescr ?= cl_abap_structdescr=>create( lt_components ).
    * create a structure
      CREATE DATA lr_struct TYPE HANDLE lr_structdescr.
      ASSIGN lr_struct->* TO <fs_structure>.
    Regards,.
    Rich Heilman

  • How to include structure in Types Definition ???

    Hello All,
          I want a declaration like this in BSP :-
    DATA : BEGIN OF imkop OCCURS 100.
                   INCLUDE STRUCTURE mkop.
    DATA :   waers LIKE mepro-waers.      
    DATA : END OF imkop.
    <b>In BSP: Type Definitions</b>
    I wrote like this :-
    Types : BEGIN OF imkop.
                    INCLUDE STRUCTURE mkop.
    Types :   waers type mepro-waers.      
    Types : END OF imkop. 
                   I'm getting an error saying that I can't use structures in this .
    Now what should I do ?
    Can anyone help me out ?
    Regards,
    Deepu.K

    deepu,
    we can declare structures as below.
    DATA:  event_data      TYPE REF TO cl_htmlb_event.
    TYPES: BEGIN OF row_iid_type,
           row_iid  TYPE hap_row_iid,
           END OF row_iid_type.
    DATA:
           t_row             TYPE STANDARD TABLE OF row_iid_type,
           t_row_wa          TYPE row_iid_type,
           t_message  TYPE STANDARD TABLE OF bal_s_msg .
    DATA:
           lw_body_element   TYPE hap_s_body_elements,
           lw_body_column    TYPE hap_s_body_columns,
           lw_body_cell      TYPE hap_s_body_cells,
           lw_return         TYPE bal_s_msg,
           warning TYPE i.
    regards,
    manasa

  • Mysterious unsaved changes in project: Class type definition stored in member VI?

    Hi,
    I'm wondering: why does LabVIEW show changes in a member VIs of a class when I only change the type definition (cluster) of the class in way that the member VI has nothing to do with the changes?
    Example:
    Class A{
      int a;
      int b; //new! -> changes in A.lvclass and A.ctl
      incr(){ this.a++;} //why incr.vi needs to be updated/saved upon adding b?
    Strangely enough, when I don't save the changes and close the project, everything looks fine after re-opening the project (no broken VIs etc.), but the issue with the unsaved changes remains.
    The thing is that I don't want to upload "fake" changes into our configuration management system as my colleagues would think that I really did changes to the VIs.
    Thanks!
    Peter

    Peter,
    it seems to me that the issue is connected to association or containment. Did you incorporate that in your small example?
    Does it happen if you previously mass compile the VIs before you add the dummy item to the class' private data?
    Currently, it seems more like a bug if indeed all items have "separate compiled code" set (e.g. in the project).
    Is it possible that some single items have that option disabled? Remember: Setting the option in the LV options or the project properties, it refers to NEW items. Existing items are not changed by that "global" settings.
    Norbert
    EDIT: You can write a small tool to check this. Make the project path the input parameter, use VI Server to load that project and load all items and query the "separate compiled code" option. If an item has the option disabled, you might want to extend the tool to change the setting and save that item. Remember that the setting is available for more than 'only' VI-files!
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Duplicate Global Element

    Hi All,
    I have a little problem (Weblogic portal 10.2) with duplicate elements in wsdl files. I have two wsdl files for two different webservices. Both the wsdl files use the same xsd (import in wsdl file) and both wsdl files have an element declaration with the same name. This seems legal to me but I see "Duplicate global element" errors in my problem section. Is there a way to solve this problem? It should be possible to have two wsdl files with the samen element declaration, or not?
    Thanks!

    make sure to have different target namespaces set for the wsdls

  • Sharepoint 2013 (Danish): Deploying site from a custom template fails with error "Duplicate content type"

    I cannot create a site-template in my own language (danish) and deploy a site based on the template.
    I created a template from a "fresh" SharePoint project site with no tampering.
    When trying to deploy a new site based on the templat I get the following error:
    In Danish:
    Beklager, men noget gik galt
    Det blev fundet et navn på en dubletindholdstype "billede".
    Tekniske oplysninger
    Fejlfinding af problemer med Microsoft SharePoint Foundation.
    Korrelations-id: 96646c9c-3213-a088-c6c4-537b0815313c
    Dato og klokkeslæt: 21-06-2014 10:23:36
    In English:
    Sorry, something went wrong
    A duplicate content type name "billede" was found.
    Technical Details
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
    Date and Time: 21-06-2014 10:31:35

    Need details from ULS logs about Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
    Check below:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/e955e737-e12e-4afa-b446-bb6e0f05e9b1/duplicated-content-type-error-creating-a-sharepoint-2010-site-from-a-custom-site-template?forum=sharepointgeneralprevious
    http://aramacciotti.wordpress.com/2012/04/04/the-case-of-the-duplicated-contenttype/
    http://community.office365.com/en-us/f/154/t/69416.aspx
    If this helped you resolve your issue, please mark it Answered

  • Restrict duplicate condition type in va01

    Hello Experts.
    I want to restrict user from entering duplicate condition types in tcode va01, how can I go about it?
    Is there any user exit or BADI available, if yes please let me know how to go about it
    Thanks in Advance...

    HI deven,
    Check any one from the below :
    Enhancement
    V45S0001                                Update sales document from configuration
    V45S0003                                MRP-relevance for incomplete configuration
    V45S0004                                Effectivity type in sales order
    V45W0001                                SD Service Management: Forward Contract Data to Item
    V46H0001                                SD Customer functions for resource-related billing
    V60F0001                                SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001                                Activating Sourcing Subitem Quantity Propagation
    V45A0001                                Determine alternative materials for product selection
    SDTRM001                                Reschedule schedule lines without a new ATP check
    V45A0002                                Predefine sold-to party in sales document
    V45A0003                                Collector for customer function modulpool MV45A
    V45A0004                                Copy packing proposal
    V45P0001                                SD customer function for cross-company code sales
    V45L0001                                SD component supplier processing (customer enhancements)
    V45E0002                                Data transfer in procurement elements (PRreq., assembly)
    V45E0001                                Update the purchase order from the sales order
    Business Add-in
    BADI_SD_SCH_GETWAGFZ                    Scheduling Agreement: Read WAGFZ from S073
    Regards
    Abhii

  • What's wrong with this content type definition?

    Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
    weird) 2) custom order. Where is it getting that Member field from?
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <!-- Parent ContentType: Folder (0x0120) -->
    <ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
    Name="Folder_OrderColumn"
    Group="Custom"
    Description="Folder with order column"
    Inherits="TRUE"
    Version="0">
    <FieldRefs>
    <FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
    </FieldRefs>
    </ContentType>
    </Elements>

    Hi,
    According to your post, my understanding is that you had an issue about the custom content type with custom column.
    I don’t think there is any issue in the content type definition, and it also worked well in my environment.
    Did you have the Member field in the project?
    I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
    By doing this, it will be easier to find out the root cause of this error.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Restrict to insert Duplicate Condition Types

    Hi,
    During PO creation with Freight Condition - ZFR1, user is able to insert this condition TWICE.
    Means Freight Condition is showing 2 times in Conditions...due to this My purchase register report get incorrect data...
    How to restrict user to insert Duplicate Condition Type???
    Please guide..

    Hi,
    If you want Freight Condition - ZFR1 should not enter again or not possible to enter by user  & select D {Not possible to process manually} in Manual entries in M/06 t.code in 'Changes which can be made' segment'
    NOTE:
    As you needed keep Freight Condition type- ZFR1 to be appeared in the PO as automatic, so then maintain the condition record (t.code MEK1) with condition type ZFR1
    OR check routine or design to write a routine & assign to Freight Condition - ZFR1 in M/08( in MM Schema), so it should not enter again or not possible to enter by user(can appear only once).
    Regards,
    Biju K

  • Dynamic Variable In a Type Definition

    Can someone tell me how to define and use a dynamic variable, which resides in a Type Definition.  I.E...
    Type: beg of type1,
            field 1 type c,
            field 2 <---this dynamic
            field 3 type c.
          end of type1.
    Can this be done in Netweaver 2004.  And if so, can you show me how?
    Thanks for your time.
    Kind Regards,
    Jason

    Don't think it is available now, but I do believe they are working on this for a future release.
    Regards,
    Rich Heilman

Maybe you are looking for