Servicebus: error: sch-props-correct.2: Duplicate global type

I have a problem creating Split Join on ALSB 3.0. The problem is that the the request message schema of Split join service contains the same type(element) that is defined in request message schema of service that I want to invoke in split join flow.
It seems that it's inpossible to invoke a service that contains one ore more types that are already defined in request schema of split-join flow. When I build the flow following error comes up:
"servicebus:/XMLSchema/project/Schemas/types/common/Person error: sch-props-correct.2: Duplicate global type: Person@http://company.com/common/person (Original global type found in file: null)" during type system creation prior to validation led to incomplete validation project/SplitJoins SplitJoin.flow line 1 1208930966845 2118
So I can't deploy the flow. Is there any workaround? Is this normal or is it a bug?
Thanks.

Sounds like a Workshop bug which I have seen before.
A couple questions to pinpoint it:
1. Are you use using either a BARE service (no operation name in the reqeust) or 2. are you using imports in your wsdl?
If 2 then I think there is a patch.
If 1, then like me, you may be out of luck.

Similar Messages

ALSB 3.0 split join error: sch-props-correct.2: Duplicate global type

Hi all,
I take 'Invoke Service' node to call external service. i'll select the operation required. that time i'm getting the following error:
"error: sch-props-correct.2: Duplicate global type: GetStateListRequestType@http://www.abcd.com (Original global type found in file: null)" during type system creation prior to validation led to incomplete validation.
Is it a bug? any patch is available for this?
Can anybody help if one has an idea on this?
Thanks in advance,
Ganesh
Edited by ganeshgadi at 05/28/2008 6:24 AM
Edited by ganeshgadi at 05/28/2008 6:25 AM

Sounds like a Workshop bug which I have seen before.
A couple questions to pinpoint it:
1. Are you use using either a BARE service (no operation name in the reqeust) or 2. are you using imports in your wsdl?
If 2 then I think there is a patch.
If 1, then like me, you may be out of luck.

Duplicate global type definition/declaration

I'm getting an error while compiling that says that one of my xml types is declared in more than 1 location and that the type is different in both locations. It is declared in the schema file on my hard drive, and then somewhere on my server. The potential fix says
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
but I do not have a proxy server.
How do update the instance on my server so that it isn't different from the file on my hard drive?
Is that even the way to go about fixing the compiler error?

It looks like your local orsmds store and your server's oramds store are out of sync.
To be sure, check the differences in WorkflowTask.xsd file at the following locations
Local machine --> "jdeveloper\integration\seed\soa\shared\workflow"
URL --> http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd
I am sure there must be a difference at the location mentioned in your original post.
Regards,
Vikrant Korde.

Duplicate Global Element

Hi All,
I have a little problem (Weblogic portal 10.2) with duplicate elements in wsdl files. I have two wsdl files for two different webservices. Both the wsdl files use the same xsd (import in wsdl file) and both wsdl files have an element declaration with the same name. This seems legal to me but I see "Duplicate global element" errors in my problem section. Is there a way to solve this problem? It should be possible to have two wsdl files with the samen element declaration, or not?
Thanks!

make sure to have different target namespaces set for the wsdls

Sharepoint 2013 (Danish): Deploying site from a custom template fails with error "Duplicate content type"

I cannot create a site-template in my own language (danish) and deploy a site based on the template.
I created a template from a "fresh" SharePoint project site with no tampering.
When trying to deploy a new site based on the templat I get the following error:
In Danish:
Beklager, men noget gik galt
Det blev fundet et navn på en dubletindholdstype "billede".
Tekniske oplysninger
Fejlfinding af problemer med Microsoft SharePoint Foundation.
Korrelations-id: 96646c9c-3213-a088-c6c4-537b0815313c
Dato og klokkeslæt: 21-06-2014 10:23:36
In English:
Sorry, something went wrong
A duplicate content type name "billede" was found.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
Date and Time: 21-06-2014 10:31:35

Need details from ULS logs about Correlation ID: 0b656c9c-52ee-a088-c6c4-5132070e3c4e
Check below:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/e955e737-e12e-4afa-b446-bb6e0f05e9b1/duplicated-content-type-error-creating-a-sharepoint-2010-site-from-a-custom-site-template?forum=sharepointgeneralprevious
http://aramacciotti.wordpress.com/2012/04/04/the-case-of-the-duplicated-contenttype/
http://community.office365.com/en-us/f/154/t/69416.aspx
If this helped you resolve your issue, please mark it Answered

Sybase Error 2601 Attempt to insert duplicate key row in object with unique

RE: Sybase Error 2601 Attempt to insert duplicate key row in object with unique index.
Hi Folks,
I'm getting the following error whilst executing a stored procedure in Sybase.
ERROR: Sybase Error 2601 Attempt to insert duplicate key row in object with unique index.
I understand that duplicate values have been inserted into a column that has a unique constraint.
I just can't figure out how to rectify the problem.
Your help will be greatly appreciated!
Many thanks in advance.

If the value I'm trying to insert (using update)
already exists in the unique-value field then the DB
refuses to update the field.
If the value is different it will update.Are you trying to insert or update in SQL (identified by the keyword INSERT or UPDATE respectively)?
Even in case of an UPDATE query, if you are going to update the values of some columns to violate the unique constraints, the update will not succeed and you will get the error message.
or is it?
it tries to create a new row, but can't because there
is another row with the same unique-values.
If this is the case, I am only trying to update and
not create a new item.To put it in simpler words, if you have a set of values defining the uniqueness of a record, you cannot insert another record with the same set of unique values. Similarly, you cannot update an existing record by modifying the set to conflict with another set of unique values which already exist in the database.
Suppose there are two columns A and B defining the uniqueness of the record and you have only two records at the moment like -
A B
========
1 1
2 1
If you try to insert a record with A = 1 and B = 1, it will fail because a record already exists. You cannot violate uniqueness because the database has already been told that there will be only one record for any given combination of A and B.
Similarly, if you try to update the second record from A = 2 to A = 1, the end result would be A =1 and B = 1. There is already a record with that set of values and this will result in a violation of the uniqueness. So, this update will also be disallowed. On the other hand, if you try to update B to some value, say 3, there is no problem in doing so.
For convenience, you can imagine an UPDATE operation to be equivalent to DELETE + INSERT operation, though it doesn't necessarily work the same way internally.
I hope I was clear enough.

Global Type declaration/definition of name duplicated error

Hi, All,
We have two EJB exposed as the Webservice , so WS-1 and WS2, When I insert these two WS into the SOA Application to used by BPEL process. I get the compile error from jdev(11.1.1.1.3) like this:
Global Type declaration/definition of name '{http://mynamespace-here/oracle}SearchParameter' are duplicated at the following locations:
EJB WS1 xsd line ***
EJB WS2 xsd line ***
SearchParameter is bean SearchRequest‘s property, this bean is shared using in two EJB method interfaces.
Our class design like this:
@XmlRootElement
@XmlType(name = "SearchRequest",
namespace = " http://mynamespace-here/oracle ")
public class SearchRequest
implements Serializable
private SearchInterface searchCriteria;
@XmlElements(value =
{ @XmlElement(name = "SearchParameter",
type = SearchParameter.class) })
public SearchInterface getSearchCriteria()
return searchCriteria;
At here SearchInterface is an empty interface and SearchParameter is a class implement this interface.
I feel @XmlElement in fact cause this duplicated error.
So in this case, how can we expose this SearchInterface/SearchParameter through the XML properly?
Thanks .
wayne
Edited by: user782942 on Feb 8, 2011 11:37 PM

If the message type in the external service and the one using in your local are using the same schema, could you check whether the external service has changed the schema in any way? Adding new fields, changing the field name, or changing the namespace? We had faced this issue before, and it was because the schema in our mds is different from the schema from OSB, which they changed it after we get the artifacts and we didn't have the updated schema in our mds.

Exchange profile error: dbconnect.prop: failed to load properties file .\dbconnect.properties

All,
We are using PO 7.4 with SP5, and we have an issue while accessing URL Exchange profile page (http://<host:port>/webdynpro/dispatcher/sap.com/com.sap.xi.exprofui/XIProfileApp) it throw's the below error.
dbconnect.prop: failed to load properties file .\dbconnect.properties
dbconnect.prop: failed to load properties file
Did some one seen this before and have resolved ? Any help is highly appreciated.
Thank you, Pranay

Though below note is not applicable to you, i would suggest you to check if the destination is created by the configuration wizard? If not you can create one and see if it helps.
Create Java RFC destination XI_EXCHANGE_PROFILE manually: Navigate to http://[host]:[port]/nwa --> Configuration --> Infrastructure --> Destinations. Create the RFC Destination with PILDUSER as logon user.
1525193 - PI CTC: Exchange Profile Access after (EhP) Upgrade

UPortal Error Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

I get this error code when trying to sign into my college web site.
I had a friend sign into hers from her computer and she did not have an issue.
uPortal Error
Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

I get this error code when trying to sign into my college web site.
I had a friend sign into hers from her computer and she did not have an issue.
uPortal Error
Sorry, but uPortal encountered an error that is preventing it from rendering. The error must be corrected by system administrators. Try again later.

Get error message prop res dll not loaded when try to print on new version of firefox but not internet explorer

Since I've updated Firefox when I try to print off a web page and use properties I get error message, Prop Res DLL Not Loaded. never had that problem before and it don't happen on Internet Explorer.

Do you have a Lexmark printer?
*[[/questions/816793]]
Copy the Lexmark printer DLL file(s) (LX??PRPR.DLL) from the C:\Windows\System32\Spool\Drivers\W32X86\3 folder to the System32 folder

When I place a 'write to measurement file' express I get an 'Error in prop page construction: Control Label: Streaming' Using Labview 8 on XP. Any ideas?

When I place express 'write to measurement file' I get an error
'Error in prop page construction:
Control Label: Streaming
Couldn't find control/constant on the instance.'
Help!!!!!
Please.
Regards
Derek

The error happens as soon as I place the symbol. The symbol is there and the properties are all accessible, but will not run.
I enclose word doc with error messages on.
Many thanks in anticipation
Derek
Attachments:
LabviewA.doc ‏86 KB

Delta loading error - how to correct

Hi,
A error occurs on a delta loading based on 2LIS_02_ITM datasource.
The PSA had not been loaded because of a dump due to a tablespace overflow.
I can't reinitialize this delta because there are too much data and I can't reload from the PSA which had not been loaded.
The tablespace error is now corrected.
What can I do to reload this delta without loosing data?
Thand in advanced for your help.
Best regards,
Bertrand

Hi.......
So request not even came till PSA also.........right.......that u mean to say........there is no failed request also in the target or in the target?........U can make the QM status red of the failed load...........delete the request from the target......and try to repeat the IP..........just check whether the system asking u for repeat delta or not...........it should ask ......bcoz records r not transfered in the BI side..........otherwise ........u hav to go for a Full repair.......but for that u hav to know that what range of records are missed.......u can give a tentative larger range.......
1) Delete init flag
2) Do Full repair(After filling the set up table)
3) Do init without data transfer
4) Delta.....
Hope this helps.......
Regards,
Debjani......

Error 'Import Proper'

Hi,
We have ECC 6.0 server 2003 with SQL database 64 bit.
While applying support package in Production server for ABAP(10).It rhrows error 'import proper phase'
Our production server is loacted at different place and connected through router.
Tried again but gave same error.
What could be the reason and what is the way out ?
its very critical.Please suggest
Regards,
manOO

Hi,
How you resolved this problem?
Thanks,
Thiago

Global Type declaration/definition are duplicated

Hi,
I am migrating my components from Solution accelerator 111150 to 111181. I have modified the names spaces for task and removed the references of workflow.xsd and replaced it with "oramds:///soa/shared/workflow/WorkflowTask.xsd". I am facing the issue of duplicate declaration/ definition
Error: Global Type declaration/definition of name '{http://xmlns.oracle.com/bpel/workflow/task}systemAttributesType' are duplicated at the following locations:
oramds:///soa/shared/workflow/WorkflowTask.xsd [line#: 248]
http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd [line#: 238]
There are at least two of them looking different:
oramds:///soa/shared/workflow/WorkflowTask.xsd [difference starting at line#:345]
http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd [difference starting at line#:334]
and below that there are numerous errors. I believe those are due to this first line. where am i going wrong?
Regards.

It looks like your local orsmds store and your server's oramds store are out of sync.
To be sure, check the differences in WorkflowTask.xsd file at the following locations
Local machine --> "jdeveloper\integration\seed\soa\shared\workflow"
URL --> http://qaipm.atfoods.com:8001/soa-infra/services/default/ReportData//soa/shared/workflow/WorkflowTask.xsd
I am sure there must be a difference at the location mentioned in your original post.
Regards,
Vikrant Korde.

Error: Finding the document specification by message type ... failed.

I'm writing my first BizTalk application base on the EAI Tutorial and getting the error
Finding the document specification by message type "ProductCatalogInformation" failed.
My schema has been deployed and is as follows.
<?xml version="1.0" encoding="utf-16" ?>
- <xs:schema xmlns="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:b="http-colon-backslash-baclslash-schemas.microsoft.com/BizTalk/2003" targetNamespace="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:xs="http-colon-backslash-baclslash-www.w3.org/2001/XMLSchema">
- <xs:element name="ProductCatalogInformation">
- <xs:complexType>
- <xs:sequence>
<xs:element name="GlobalDocumentFunctionCode" type="xs:string" />
<xs:element name="CatalogTypeCode" type="xs:string" />
<xs:element name="GlobalActionCode" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
My XML is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ProductCatalogInformation>
    <GlobalDocumentFunctionCode>Request</GlobalDocumentFunctionCode>
    <CatalogTypeCode>Partial</CatalogTypeCode>
    <GlobalActionCode>Revise</GlobalActionCode>
</ProductCatalogInformation>
The error I get is
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler" Receive
Port: "MondaySolutionRequestPort" URI: "C:\BizTalk\Receive\*.xml" Reason: Finding the document specification by message type "ProductCatalogInformation" failed. Verify the schema deployed properly.
Suggestions please?
Is there a link where I can download the completed solution to the BizTalk Server Tutorial 1 Enterprise Application Integration ?
Thanks in advance..

1) Check the GAC and ensure that the schema is there, be sure the version numbers are the same.
2) You should also restart the host instance and try again.
To check that the schema exists and is deployed properly open the query analyser on your BizTalk Server and
use the BizTalkMgmtDb and run the query below. In the where clause place the correct target namespace and root node name which is being reported in the error log from the Event Viewer.
Select msgtype, assemblyid, clr_namespace, clr_assemblyname
from bt_documentspec
where msgtype = targetnamespace#rootnode;
3) Check the sample XML, its without namespace. Generate instance from the schema and then try.
Should be
<ProductCatalogInformation xmlns="http://MondaySchemas.Schema1"><\ProductCatalogInformation>
What
you need to do to fix "There was a failure executing the receive pipeline… failed to load. Verify the schema for this document specification is deployed and is in the Global Assembly Cache" Error after deploying BizTalk Solution
You can get everything you need to learn about BizTalk here at Learning
about BizTalk Server has never been easier now with the TechNet Wiki
Here is the solution: BizTalk
Server Tutorials--Tutorial 1: Enterprise Application Integration
Video at Biztalk
Server 2010: Enterprise Application Integration (EAI) Video Tutorials
Rachit

Servicebus: error: sch-props-correct.2: Duplicate global type

Similar Messages

Maybe you are looking for