Duplicate Queries and Query Components in BI Production Box

Hi:
We have a situation where we have duplicate queries and query components in our Production BI box.
The problem was caused by transports.  We have a development landscape and a support landscape where both are transporting separately up to the BI Production Box. 
For example, query ABC was created in the development landscape and transported up to our production box.
The same query ABC was created in our support landscape and transported up to our production box.
Now in the production box we have 2 queries ABC with the same technical name and description but with different active ELTUIDs.  
We have found the program ANALYZE_RSZ_TABLES and it does show us this problem in our production box with many queries and query components.
The question is how do we get rid of the duplicate ELTUIDs in our Production box and how do we stop this from happening during transport?
any suggestions would be helpful.

Hi JC,
I think you can use Tcode RSZDELETE to delete the duplicate UIDs of elements or any query objects.
Test it in dev box / sandbox before using it in prod.
Thanks

Similar Messages

  • Duplicate queries

    We have duplicate queries and plan to report ANALYZE_RSZ_TABLES to change the name in some and delete in others.
    Part of our checks has referred to considerations that have been made in SAP Note 792779.
    However, we have the following scenario:
    We have a duplicate query that is shown in RSRT whilst the other appears in the Info Area Open Dialog box.  We will be changing the name of the one that appears in RSRT.  After the change will the other version of the query appear in RSRT if I run with COMPID and secondly will the changed query name appear in RSRT and the Info Area Open Dialog box with its new COMPID?
    Thank you in advance for your help

    Hi JC,
    I think you can use Tcode RSZDELETE to delete the duplicate UIDs of elements or any query objects.
    Test it in dev box / sandbox before using it in prod.
    Thanks

  • Migrating groups and users from QA to Production

    Post Author: KSK
    CA Forum: Administration
    Hi,
    I have to migrate security setup with Groups and users from QA to Production box .
    setup is in Unix.
    Note: my production already have some other projects related groups and Unix.. and when I say migrate, i just want to add the groups from qa to append or add to production with exsiting setup and not to overwrite..
    any help is greately appericated
    thanks
    KSK

    Post Author: andyskinner
    CA Forum: Administration
    Use the migration wizard and set it to merge, the deltas should be added ok and anything that exists in both systems should get a number added at the end.

  • Search results web part, path and query problem

    Hi
    I am updating a search web part and I want to show results from a specific site, I m using "path" to filter results, results are being returned correctly but now query I type in search is getting ignored. for example if I type "zxcvbn" I
    still get all results from that specific site. If I remove "path" filter I see proper results.
    Can I edit web part query to include "path" and "query" I type in search box?

    Hi Shafaqat,
    Thanks for sharing the solution which will benefit others who have the same issue.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Activation of BW Production Objects and Transport of Queries and Work books

    Hi,
    I have successfully transported 0FIGL_1 InfoCube (only in Data Flow Before) from BW DEV to BW Production...
    But In BW Production This Cube and InfoSources and Update rules and InfoObects are all in inactive...
    What to do?..
    Please tell me step by step procedure.....
    and also suggest me on how to transport Queries and work books related to My 0FIGL_1 Cube...
    Please tell me all step by step procedure...
    Help will be greatly appreciated..
    This is very urgent
    Thanks in advance...

    Hi,
    May be you are telling is correct but i am unable to follow..
    Please correct if my understanding is wrong....
    1. I have Created one BEx Truck Request...it is not Released so far..So, it is there in SE09 of BW DEV
    2. Selected Queried and work books --- Grouping --- Only necessary objects -- Collection mode -- automatic...(Default all queries and workbooks selected as check box)
    3. Click Transport truck (Which is beside of Grouping Option)..
    4. Created one request and then released... But not imported into BW Production..
    5. Now I have modified all the queried (Change text)
    6. RSA1 -- Transport connection -- Selected modified queried...
    7. Grouping only necessary objects and collected mode --automatic...
    8. Selected modified queries and dragged into right side...
    My question here is they are not checked check box under transport?...shall i check it?
    Shall i release Old BEx Request? and then before transporting these new modified queries Create another BEx Request?
    or else..
    Create new request for modified Queries? and then transport?
    Now the situation is i have already created transport request for modified queries..What to do? shall i release them also?...
    Pls suggest me....

  • Copy queries and reports from production to qa

    Hi,
    One of our customers has up to now created their BEx queries and reports directly in production
    But from now on they are going to create them in dev and then transport to qa and prod.
    Is there any way to transport the already existing queries/reports from prod to qa?
    BR,
    Linda

    Hello,
    You have to set up the transport ( Your BASIS can prepare transport landscape )  to bring the query transported from Prod to test environment
    But you can copy Workbooks from Production to develpment.Open the workbook from Production ,disconnect from server,then save as new workbook or existing workbook..now log into Dev system and save workbook under required role.
    Regards,
    SRIKANTH

  • I don't want to know how to delete duplicate photos anymore. I would like to know why Apple have not put in delete duplicate option menu in iPhoto? Very curious. Is it to frustrate users, so they have to go out and buy another apple photo product?

    Just want to know why Apple have not made an options menu to remove duplicate photos in iPhoto? I know about downloads you can purchase to delete Dups, but I'm very interested to find out from apple themselves as to why they left this out, to die without knowing this is like having viruses on a pc or waiting for the web page to pop up on windows...
    Option
    A. Is it to annoy the user, to frustrate them enough to go out there and buy another apple photo product?
    Or
    B. Is it to annoy the user, to frustrate them enough to commit suicide, to reduce population in the world?
    Is there a third reason? Can someone help me, otherwise I'll have to go with option B.

    sunshinecowgill wrote:
    We have three operational computers, one does not have iTunes on it.  Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers.  See what I mean?  I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. 
    You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized.

  • General queries regarding explain plan and query

    Hello Oracle buddies,
    I have few badly formed queries with plenty of nested loops, merge join cartesian , plenty of sorting and in the query so many sub queries and all.. The cost of the queries are high like anything.
    some even has 130Crore of cost .
    When I got the chance to look into those quries I test them in Non Prod systems and which almost have 90-95% similar data as it was refresh by PROD few weeks back.
    I found few queries are having the same explain plan but cost is less like anything. for example 5000 or 6000.
    When I check for the possibilities of wrong statistics I found they just collect with default setting...
    In Non prod I saw only the auto stat job is ran and most of the tables are having the stats which are of last analyzed on the day of refresh.
    Now what could be so differentiating factor that drives a queries' cost lesser than Prod systems, when the data is almost same. Also if prod ssystem is gather by only gather_schema_stat('SCHEMA_NAME') then it should carry the same stat in non prod while refreshing. I know ppl do not gather stat on test only auto job is running ...
    I need to have clear prove before I can have a clear understanding..
    Please help me to know what factors could be differentiating?
    -Regards,
    J_DBA_Sourav

    j_DBA_sourav wrote:
    Hello Jonathan,
    Thanks for the reply. The team refreshed it, by expdp/impdp method where by default statistics are included. In that case?
    Is this problem probable to happen due to statistics only or anything else is also responsible. Even the explain plan is same.
    Please through some light on it.
    Auto job is on as I stated earlier but in test systems most of the tables are showing refreshed date as last_analyzed
    -Regards
    JDS
    Anything that puts the stats out of sync with each other may be sufficient to cause problems. Any queries that depend on sysdate may cause a problem.
    As a simple check:  select table_name, last_analyzed from user_tables on the two systems, with some order by clause (e.g. table_name), and see how many tables were analysed at different times - anything on either system after the exp/imp could be part of your problem.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    Now on Twitter: @jloracle

  • Products and software components not found in SLD?

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and  i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i amot able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

    Hello All,
    I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
    I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
    But i am not able to find the products and software components in the SLD.
    SAP (GM) POS system:
    Product (one of the following)
    SAP TRANSACTIONWARE GM 9.5
    SAP POS 1.0
    SAP POS 2.0
    Software Component Version (all of the following)
    XI CONTENT STORE CONNECT 2.0
    XI CONTENT GM STORECONNECT 1.0.
    what may be the reason?
    Thanks and best regards,
    Anil

  • Hi i added a few sofware products and hence components do we need to add ..

    hi i added a few sofware products and hence components do we need to add these
    to the technical and business system

    Yes add them. How ever, if you do not add them you will not get any error. But while editing the condition editor in Receiver agreement or Interface Determination, you will not get the source msg structure.
    So it is better to add them.
    Regards,
    Jai Shankar

  • Standard Query for Top 10 queries and Users

    Hi Experts,
    Is there any query which gives the details like ,
    1. Top 10 queries executed in a month
    2. Top 10 users ( By no of queries executed )
    Regards,
    Bhadri M.

    1. Top 10 queries executed in a month
    Use Query 0TCT_MCA1_Q0142.
    In this report you will have to filter variable BI Object to Queries and also it gives stats for the last 30 days, you have have to remove the SAP User exit variable in case you do not want to use the 30 days option. And then you will have to define Condition for Top 10.
    2. Top 10 users ( By no of queries executed )
    Use Query 0TCT_MCA1_Q0141.
    Similarly you have to modify this query.
    -Neelesh

  • How Do We Know the Product And the Components Installed on R/3 System ????

    Hi Experts,
    How Do We Know which Product We have on Our Machine And Which Components Are Installed And Their Versions ????
    Please Let Me know the Process To get Al these Details ,,,,
    Regards
    Khanna

    Hi Rajesh,
    Go through the following link:
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/frameset.htm
    Reward points if helpful.
    Regards,
    Renuka.

  • Naming conventions/hierarchies for products and software components

    Hi,
    Can someone please advise what they have found works well for naming products and software components and recommended hierarchies?
    Following the SAP model it seems to make sense to have a custom product for each SAP product when we are developing custom interfaces for the related system, e.g. ZPRODMYCOMPDEVS_R3, ZMYCOMPDEVS_CRM etc.
    Beneath this level as similar convention could be used for the software component, e.g. ZSWCMYCOMPDEVS_CRM or if it is a modular SAP system like R/3 perhaps a grouping per key application area? (e.g. HR, Finance, Logistics etc)
    I know it's not compulsory to start these with 'Z' but it would help group custom developments.
    Any advice greatly appreciated.
    Alan

    Hi,
    Please refer to this blog...
    /people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates
    that is mentioned in the thread
    Name space
    Regards,
    Bhanu

  • Transporting Products and Software components

    Hi ALL,
    I have two new products for which I have created the export file to be imported into the target system. The target system already contains few other products and Software components. Is it true that the new export file from source system will over write all entries in the target system?? or will it be an append ??
    The " How to handle SLD for XI" doc tells that it will overwrite..I am a little concerned as there has been no SLD transports done in these boxes and all products currently  in the target box have been manually created.
    -Ken

    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation

  • How to delete WAD and query objects in sap bi

    hi,
          we need to delete the WAD and query from the BW development server and transport the same to the quality and production.
    please provide the task we need to perform to delete the particular WAD and related queries in the sap bi.

    hi,
    tcode RSZDELETE for query,
    for WAD, Goto your web template-->Select Webtemplate(from menu) and then click on Delete.
    While deleting it'll ask you for the trasport request, Save it in the TR and then move it prd--> web template in prd system will get deleted.
    Note: WAD template can be delete through table RSZWTEMPLATE , but it is not recomended to delete it from the table.. and more over you'll not have autorization to delete entries in prd system.. so its better delete it from dev and save it in a TR and then move the TR to prd
    -jijo

Maybe you are looking for

  • Date option in stock reversing program(SAP NOTE 175842)

    Hi Gurus, We have prepared a program with SAP NOTE 175842 for reversing stock posting.My client has done GR in march 09 and quality peoples have posted to unrestricted stock in same month.Now because of some reason stores person want to cancel GR. So

  • Iphone music sync problems

    Hello, I recently transfered music from my dell laptop (music uploaded from personal cd collection) to my new iphone 4s.  The songs appear on the phone in light grey but will not play.  I have authorized the laptop after the transfer per a suggestion

  • Dynamic 'from' Clause in Native SQL

    Hi All, While running a select query in ORACLE, we can put the table name in '<i>from</i>' clause at the runtime-Seletion Screen Parameter . But I am not able to do so in SAP using Native Sql. Does SAP has any  restrictions regarding this? It might b

  • Got error when creating stored procedure

    Hi, I am a rookie in Oracle. I created a stored procedure: create or replace procedure my_first_sp as begin select cid from actions where rownum<3; end; And I got an error : "**** compilation error" After I "show error" I got the description to see a

  • Template From

    Hi All, I am getting the following error: •     symptom: Error opening TEMPLATE.fmb in Forms Builder •     symptom: FRM-18108: Failed to load the following object •     symptom: FRM-10102: Cannot attach PL/SQL library APPCORE. This library •     atta