Activation of BW Production Objects and Transport of Queries and Work books
Hi,
I have successfully transported 0FIGL_1 InfoCube (only in Data Flow Before) from BW DEV to BW Production...
But In BW Production This Cube and InfoSources and Update rules and InfoObects are all in inactive...
What to do?..
Please tell me step by step procedure.....
and also suggest me on how to transport Queries and work books related to My 0FIGL_1 Cube...
Please tell me all step by step procedure...
Help will be greatly appreciated..
This is very urgent
Thanks in advance...
Hi,
May be you are telling is correct but i am unable to follow..
Please correct if my understanding is wrong....
1. I have Created one BEx Truck Request...it is not Released so far..So, it is there in SE09 of BW DEV
2. Selected Queried and work books --- Grouping --- Only necessary objects -- Collection mode -- automatic...(Default all queries and workbooks selected as check box)
3. Click Transport truck (Which is beside of Grouping Option)..
4. Created one request and then released... But not imported into BW Production..
5. Now I have modified all the queried (Change text)
6. RSA1 -- Transport connection -- Selected modified queried...
7. Grouping only necessary objects and collected mode --automatic...
8. Selected modified queries and dragged into right side...
My question here is they are not checked check box under transport?...shall i check it?
Shall i release Old BEx Request? and then before transporting these new modified queries Create another BEx Request?
or else..
Create new request for modified Queries? and then transport?
Now the situation is i have already created transport request for modified queries..What to do? shall i release them also?...
Pls suggest me....
Similar Messages
-
Planned Delivery Time and Transportation duration- Tlane and Means of Transportation
Dear Experts ,
I have question regarding lead time calculation my SNP
I have
Start Location : A
Destination location: B
I maintained Planned delivery time in ECC- material master as 10 days and cifed to Tlane Product procurement as 10 days
and leave empty in the transportation duration empty so the total lead time is 10 days from start location A to destination location B
now
I maintain 24 hours in Means of transport as transportation duration by truck
now the lead time is 11 days from start location A to destination location B
Now
i leave empty planned delivery time empty and maintain Means of transport duration as 48 hours
so the lead time is 2 days from A to B
does my understanding is correct or not advise please
Regards
RajHi Raj,
Take a look of these notes. Specially SAP note 379006. This note explains how the system sets the times in ECC and APO. Basically, It recommends a BAdI in order to match the delivery date in ECC and APO (transit time). What I recommend is to set delivery time equal to 0 if this is possible in your company.. This is not an SAP recommendation, because the delivery date is a key master data in the purchasing process and making it equal to 0 could not be allowed.. Now, if its possible in your case, it is the easiest way to ensure consistency...
These are the notes:
379006
- Transport duration and planned delivery time in APO and R/3
441622
- Supplying-plant-dependent planned del. time/trans. time
624982
- Incorrect dates for RBA controlled stock transfer
Kind Regards,
Mariano -
Inconsistencies between CR wildcard (* and ?) and SQL std queries (% and _)
Certain queries built using Crystal Reports do not return a full result set of data as expected, compared to using standard SQL wildcards in an interactive native SQL tool.
Does anybody know if any of these are bugs in Crystal Reports?
See example data and queries with their associated results below.
Example:
Table name: customer
Column definitions:
lname char(20)
state char(2)
Relevant rows from our demo database, queried from the native interactive SQL tool are shown below. For the purposes of illustration, I modified some of the state fields so that there were examples of 'N ', ' N' and 'N' (space in front of the letter N, space after the letter N, and just the letter N with no spaces). I have also added the single quote characters in the query results for those rows to highlight where the spaces exist or do not exist in the data:
1 > select id,lname,city,state from customer
where state like '%N%' or lname like '%en %'
Col. id lname city state
[ 1] 101 Devlin Rutherford 'N ' < was NJ
[ 2] 102 Reiser New York 'N' < was NY
[ 3] 104 Mason Knoxville NN
[ 4] 105 McCarthy Carmel IN
[ 5] 107 Colburn Raleigh NC
[ 6] 108 Goforth Chattanooga ' N' < was TN
[ 7] 111 Ricci Syracuse NY
[ 8] 112 McDonough Brooklyn Park MN
[ 9] 113 Kaiser Minneapolis MN
[ 10] 114 Chopp St Paul MN
[ 11] 115 Phillips St Paul MN
[ 12] 116 Gugliuzza Mamaroneck NY
[ 13] 118 Sanford Raleigh NC
[ 14] 120 Stein Elmsford NY
[ 15] 121 Elkins Carmel IN
[ 16] 129 Fahrvergnugen Baltimore MD
[ 17] 131 Sinnot Bohemia NY
[ 18] 132 King Fort Wayne IN
[ 19] 135 Clarke New York NY
[ 20] 136 Wooten Plymouth MN
[ 21] 137 Morfek Ft. Wayne IN
[ 22] 138 Patoff Burlington ON
[ 23] 141 Pyper Fort Wayne IN
[ 24] 147 Lela Wood Bridge NJ
[ 25] 150 Mason Don Mills ON
[ 26] 152 Jones Austin NY
[ 27] 160 Nette Port Washington NY
[ 28] 163 Peese Mississauga ON
[ 29] 165 Mournen Ft. Wayne IN
[ 30] 169 Terlemezian Matthews NC
[ 31] 177 Zubenko Raleigh NC
[ 32] 179 Nguyen Miramar FL
[ 33] 180 Peros Rochester NY
[ 34] 181 Teeven Washington DC
[ 35] 198 Chen San Ramon CA
[ 36] 199 Mentary Rochester NY
[ 37] 202 Murphy White Plains NY
[ 38] 208 Suess Albany NY
[ 39] 221 Johnson Santa Fe NM
[ 40] 331 Johansen New Orleans LA
[ 41] 550 Antolini Fargo ND
[ 42] 552 OToole Nashville TN
[ 43] 665 Thompson Manchester NY
43 rows Affected.
Several queries perform as expected between Crystal Reports and the native SQL query tool. However, in some cases, the results are different. Crystal Reports does not return as much data as the native SQL query tool. I'm not implying which one is correct, I'm merely stating that there is a difference between them.
In the cases below, the 'Crystal Reports record selection formula' is obtained by navigating the Crystal Reports menu: Report -> Selection Formulas -> Record...
Single quotes are not specified in the results below - refer above for the actual data in those rows.
The following cases are inconsistent between the native SQL query tool and Crystal Reports designer:
Case 1:
Length of field to be searched: Short (2 chars)
Wildcard description: letter 'N' + any single character
Native interactive SQL query and results:
1 > select id,lname,city,state from customer where state like 'N_'
Columns: id lname city state
[ 1] 101 Devlin Rutherford N
[ 2] 102 Reiser New York N
[ 3] 104 Mason Knoxville NN
[ 4] 107 Colburn Raleigh NC
[ 5] 111 Ricci Syracuse NY
[ 6] 116 Gugliuzza Mamaroneck NY
[ 7] 118 Sanford Raleigh NC
[ 8] 120 Stein Elmsford NY
[ 9] 131 Sinnot Bohemia NY
[ 10] 135 Clarke New York NY
[ 11] 147 Lela Wood Bridge NJ
[ 12] 152 Jones Austin NY
[ 13] 160 Nette Port Washington NY
[ 14] 169 Terlemezian Matthews NC
[ 15] 177 Zubenko Raleigh NC
[ 16] 180 Peros Rochester NY
[ 17] 199 Mentary Rochester NY
[ 18] 202 Murphy White Plains NY
[ 19] 208 Suess Albany NY
[ 20] 221 Johnson Santa Fe NM
[ 21] 550 Antolini Fargo ND
[ 22] 665 Thompson Manchester NY
22 rows Affected.
Crystal Reports record selection formula and results:
{customer.state} like "N?"
id lname city state
104 Mason Knoxville NN
107 Colburn Raleigh NC
111 Ricci Syracuse NY
116 Gugliuzza Mamaroneck NY
118 Sanford Raleigh NC
120 Stein Elmsford NY
131 Sinnot Bohemia NY
135 Clarke New York NY
147 Lela Wood Bridge NJ
152 Jones Austin NY
160 Nette Port Washington NY
169 Terlemezian Matthews NC
177 Zubenko Raleigh NC
180 Peros Rochester NY
199 Mentary Rochester NY
202 Murphy White Plains NY
208 Suess Albany NY
221 Johnson Santa Fe NM
550 Antolini Fargo ND
665 Thompson Manchester NY
Note that the first two rows are not present here.
Case 2:
Length of field to be searched: Short (2 chars)
Wildcard description: letter 'N' + one space
Native interactive SQL query and results:
1 > select id,lname,city,state from customer where state like 'N '
Columns: id lname city state
[ 1] 101 Devlin Rutherford N
[ 2] 102 Reiser New York N
2 rows Affected.
Crystal Reports record selection formula (menu: Report -> Selection Formulas -> Record...) and results:
{customer.state} like "N "
id lname city state
No data is displayed.
Case 3:
Length of field to be searched: Long (20 chars)
Wildcard description: 0 or more + 'en' + space + 0 or more
Native interactive SQL query and results:
1 > select id,lname,city,state from customer where lname like '%en %'
Columns: id lname city state
[ 1] 129 Fahrvergnugen Baltimore MD
[ 2] 136 Wooten Plymouth MN
[ 3] 165 Mournen Ft. Wayne IN
[ 4] 179 Nguyen Miramar FL
[ 5] 181 Teeven Washington DC
[ 6] 198 Chen San Ramon CA
[ 7] 331 Johansen New Orleans LA
7 rows Affected.
Crystal Reports record selection formula (menu: Report -> Selection Formulas -> Record...) and results:
{customer.lname} like "*en *"
id lname city state
No data is displayed.
Case 4:
Length of field to be searched: Long (20 chars)
Wildcard description: 0 or more + 'en' + any 7 chars
Native interactive SQL query and results:
1 > select id,lname,city,state from customer where lname like '%en_______'
Columns: id lname city state
[ 1] 129 Fahrvergnugen Baltimore MD
1 rows Affected.
Crystal Reports record selection formula (menu: Report -> Selection Formulas -> Record...) and results:
{customer.lname} like "*en???????"
id lname city state
No data is displayed.
Case 5:
Length of field to be searched: Long (20 chars)
Wildcard description: 0 or more + 'en' + seven spaces
Native interactive SQL query and results:
1 > select id,lname,city,state from customer where lname like '%en '
Columns: id lname city state
[ 1] 129 Fahrvergnugen Baltimore MD
1 rows Affected.
Crystal Reports record selection formula (menu: Report -> Selection Formulas -> Record...) and results:
{customer.lname} like "*en "
id lname city state
No data is displayed.Clint,
Yes, I think that would probably work fine.
The point here is that I think there is a bug in the way Crystal Reports processes wild card strings and passes the sql to the downstream database. Crystal Reports should translate the wild card strings into the corresponding sql standard syntax, and pass the wild card string to the database, but it does not appear to be doing this.
At this point, I am only interested in notifying the SAP / Business Objects engineering department of this bug, or in posts that point me to a fix to the bug, rather than a work-around.
Thanks . . .
- Jay -
Transport customizing objects in transport of copies
Hallo,
my question is, if I can include objects from customizing transport into transport of copies and transport them only into specific system. What is differences between transport objects in transport of copies and customizing transport. Generaly I understand what is diferent between those type transport, but.. My interest is mainly what can be bad with customizing objects in target system after transport of copies and what activities does customizing transport in comparison with customizing transport. Are there any risks??
thanks a lot for answer
Edited by: Tomas Chudoba on Oct 19, 2010 2:50 PMHi Tomas,
The Transports of copies allow you to transport (sub-)objects in an object list into any other SAP System you want.
Where as Workbench or Customizing requests there is no automatic delivery into other systems for transport of copies.
Regards,
Chandu. -
Transporting an Object from Development to quality and then to Production
Hello SAP Friends
I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
Please give some detailed Navigation...Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh -
How to transport an LSMW object from dev to Quality and to Production?
hi All,
Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
Thanks in Advance.
Regards.
Abhilash.Hi,
The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
This will transport the entire project though, not possible to transport a single object this way.
step by step
1. Run Tcode LSMW in source system.
2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
3. Now login to destination system. again execute LSMW.
4. Now goto Extras-->Import.Give your file which was downloaded earlier.
5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
6. Now execute all steps.
Also refer the below link
http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
Please reward points if it helps
Thanks
Vikranth -
In which situation I need to active objects after transport
Hi Experts,
I'm wondering in which situation I need to active object after transport? In some cases, I have to active transformation, DTP, infoobject, multiprovider.... Does any one make a conclusion of that?
thanks in advance.
EricSometimes, because of impact of a transport some other objects will be deactivated, then we need to manuaaly activate the objects after transport.
Also, sometimes transport after import process could not be able to activate the objects, then also we have to activate them manually.
Or suppose, you have moved and infoobject, due to which some other objects become inactive (where ever infoobjects is being used), then we have to activate them manually, if you dont want to transport them. -
How to collect and transport a hierrachy linked to an object ?
Hi guru,
I am working in BI 7.0 and linked a Hierarchy to oan object.
When I transported the object to production, the hierarchy is missing in production.
How to collect and transport this hierachy ?
In case of a user-defined hierarchy, is it possible to transport it or have I to re-create in prod ?
Thanks for your supporthi ,
Yes we can create hierarchy in production .
But if you have some kind of infrastructure build for data laod , that needs to be separately migrated.
The Info-object with the Hierarchy check in maintaineance window of info-object should be migrated to production in order to naually maintain the hierarchy in Production
Thanks
Mukesh -
Activated Objects in Transport Request
Hi Friends ,
Currenlty we have comepleted all our development in BD1 and collected all the objects in a transport request , But now my question is what is the best way to check all the activated objects are included in the transports to be released to BQ system ?
Any inputs greatly accepted,there is no easy way to check if all the needed objects for a whole project are captured in a request or not. As the objects may be scattered across the infoareas, the only fool proof way to be sure, is to manually check all the objects - if it is included in the request or not. or the check in the transport connection to see if you are missing any of the dependent objects (perhaps the easiest)have a check list of objects and make sure of the dependencies so that they can transported in order.
sequence should be:
DS, IO, App components, IO catalogs
cube and ODS
transformations
DTP and infopacks
multi providers
queries
PChains
Message was edited by:
voodi -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
Hello Experts,
I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
And If yes, will it have any other impact on webi reports, web services or dashboards?
Thanks & Regards,
Alfred ThomasHi Gill,
As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
Can you please help?
Regards,
Alfred thomas -
Object locked after Release and Transport to QAS/PRD
During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of ManitobaHi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA -
Transport an Appraisal and Objective Setting Template
Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
Scenario:
You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
Cause & Resolution:
The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
Happy transporting...
Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM>
A. Jimenez wrote:
> Hi Francois,
>
> I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
>
> You or anyone know how to transport this customization?
>
> Thanks in advance
Hi Abe,
what is the appraisal process you are talking about? The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document? if so SAP does not have a great straightforward solution, but they did provide us some options.
you can check out this thread and if you want I can send you the full document that is referred to in the post.
EP4: Performance Management-Flexible-Transporting the Tab & Process config -
Creating t.code for ABAP query and Transport it TO Production and run it .
Hi Friends
Thanks for ur reply ,
The requirement is that i want to create tcode for abap query and that query can be regenearted ,
in case of regeneration programe name i got answer programame name will be change, i created and modified query but i saw the same programe name ,,, may be it changed when it is trasnported if so then what ??
and also pls give me solution for asiging tcode for query which is going to be regenerated.
thanks and regards
farukhDear Farukh,
As we know,
Query is created in Production server and a corresponding program is generated by System.
What we have to do is just to assign the program to the desired transaction code in Development server and transport it.
If you have any doubts please let me know.
Kindly assign points if you find this info usefull.
Regards,
Lijo Joseph -
Transporting role menu and workbook created diurectly in production system
Hi gurus,
We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
Could you please explain to us what we have to do in order to not wiped out our production workbooks.
Thank you in advancethank you, it's more clear for me...
Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
Thank you in advance
Maybe you are looking for
-
How do i get my songs from a previous computor to a present one?
On my old laptop i had downloaded manyb songs of intunes but that laptop broke and now tht i have i new one i dont know how to get hold of the songs ive previosly downloaded. any help?
-
Use of serial# as Primary Key. (Experience DBA Advise Requested)
Sorry if question is out of the scoop of forum. In my newly joined environment my seniors always use serial# as PK in every table every time & never use candidate key as PK. Doing so always left the candidate key as un-index, non-unique & null. It pr
-
Disk Warrior v 3.0.3 on 10.4.7
I'm booting from the DW CD and trying to rebuild the directory, it goes straight to step 5 and stalls on step 7 - it is taking ages and then I cant quit out without turning the computer off. Has anybody else had these problems? I cant access the Also
-
To papulate byte[]. Help please
hello all java programmers, I have some variable defined as fallows : byte code = 0x22; byte type = 0x00; short csum = 44; short rsvd = 00; InetAddress a = new InetAddress("111.111.1.11"); Now i want to put all this values into byte[]. I used DataOut
-
When trying to send photos I keep getting the message: "SMTP rejected the password" Why does this occur?