Transporting Products and Software components
Hi ALL,
I have two new products for which I have created the export file to be imported into the target system. The target system already contains few other products and Software components. Is it true that the new export file from source system will over write all entries in the target system?? or will it be an append ??
The " How to handle SLD for XI" doc tells that it will overwrite..I am a little concerned as there has been no SLD transports done in these boxes and all products currently in the target box have been manually created.
-Ken
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Similar Messages
-
Products and software components not found in SLD?
Hello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i amot able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
AnilHello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i am not able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
Anil -
Naming conventions/hierarchies for products and software components
Hi,
Can someone please advise what they have found works well for naming products and software components and recommended hierarchies?
Following the SAP model it seems to make sense to have a custom product for each SAP product when we are developing custom interfaces for the related system, e.g. ZPRODMYCOMPDEVS_R3, ZMYCOMPDEVS_CRM etc.
Beneath this level as similar convention could be used for the software component, e.g. ZSWCMYCOMPDEVS_CRM or if it is a modular SAP system like R/3 perhaps a grouping per key application area? (e.g. HR, Finance, Logistics etc)
I know it's not compulsory to start these with 'Z' but it would help group custom developments.
Any advice greatly appreciated.
AlanHi,
Please refer to this blog...
/people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates
that is mentioned in the thread
Name space
Regards,
Bhanu -
Transport products and software component version
Hi,
I created a Products and its Software Component Version in System Landscape Directory of XI development.
I imported this Software Component Version into Integration Builder and developed design and configuration objects.
The scenario is completed and now I want to transport the Products and Software Component Version to XI Production.
Could someone please explain the transport procedure.Hi Shravan,
Thanks four your instructions. I would like to have more details on the export/import procedure. Please confirm the following steps are correct:
From SLD of XI development:
1/ Edit new product and its software component version.
2/ Click on icon Export: XI generates a zip file and downloads it in c drive.
From SLD of XI Production:
1/ Select Import utility under system catalog.
2/ Browse and select the zip file
In XI production there are existing third party products, and I do not want the transport of this new product causes any problem.
Design and configuration objects will be exported/import ed after the successful transport of product and software component version transport.
Regards,
Daniel -
XI products and software components in SLD
We are starting to implement XI in order to exchange messages between R/3 systems.
Is it better to create a custom software component within the standard SAP R/3 Product (in the SLD), or do you suggest to create also a custom product (even if the systems involved are SAP systems) ?
Which are advantages and disadvantages ?
Thanks in advance.I am not sure if the question is answered. I am trying to see what is correct. SAP appear to say build under the specific Product supplied. Or else, what is that used for ?
I am not a seasoned XI developer by far, however, upon reading XI books and documentation, i see that S/W components are attached to Products, and the Products are Imported into the Intergration Builder. I have also seen, and been told, that it is common practice to create a Product that reflects the Project, and then attach the S/W components under that, for which XI would be interfacing. For example, if I were working on a new project, say, "myProj" I would create a product called "myProd", then attach the S/W components involved, say, CRM under that. When the Product gets imported into the Intergration Builder, I continue my developments under a new namespace, that is under the Product "myProj".
Is this right?
In reality, "myProj" is not a Product, it is a project.
I hope this is clear
thanks
Glen -
Product and Software component in SLD
Hi,
What is the basic concept of product and Software component.I have few questions.
If our company is going for Sap implementation of ISmedia
and XI as middleware for interfacing with other systems then what do we need to do for product and SWC.
Do we need to create a third party product and SWC for this project in sld?
We can create differnt Software component under the existing Product of SAP ISM
What are the best practices
Thanks,
Naveen.Hi,
about Software Product and component go thru this part of SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
<i>Do we need to create a third party product and SWC for this project in sld?</i>
>>yea, you can create a thridparty product.
<i>We can create differnt Software component under the existing Product of SAP ISM</i>
>>>You can create software components for the product.
I think, the documentation will help you understand this.
Regards,
Moorthy -
Hi i added a few sofware products and hence components do we need to add ..
hi i added a few sofware products and hence components do we need to add these
to the technical and business systemYes add them. How ever, if you do not add them you will not get any error. But while editing the condition editor in Receiver agreement or Interface Determination, you will not get the source msg structure.
So it is better to add them.
Regards,
Jai Shankar -
Transport of Assembled Software Components
Hi @all,
I am new in NWDI and I've got some questions to the transport logic. Please let me describe my problem:
Here in our project we're using the NWDI in combination with the WebBill (FSCM) application. The WebBill application consists of 4 SC's:
1. CORE (WebBill Main Part with extensions a.s.o.)
2. UI-1 (UI like mapping and jsp's of the WebBill)
3. UI-2 (Another UI of the WebBill)
4. FSCM Biller Direct (WebBill Coding Parts)
The CORE and the FSCM-Parts are excluded from the deployment and they are not transported to the follow-on tracks to further production-sap-backends. Only the UI-Parts can be deployed and transported to the follow-on-tracks.
Now I made changes to the CORE-Part, but the CORE-Part is not deployable. I've heared that it's only possible to make a new assembly with the UI-Components ("Assemble Components" in the Assembly-Part of the CMS). But what is with the follow-on tracks? Is it sufficient to transport only the UI-Components to the follow-on tracks because I've created an assembly from all of them?
Thank you very much in advance,
StefanHi Slava,
thank you for your good answer, but there is one thing that is not clear for me yet.
What does that mean for the follow-on-tracks?
In the maintenance track, where the assembly is generated, the result is the CORE-Part and the UI-Part in the "test" and later in "approval" tab.
In the follow-on-track is no possibility to make an assembly again, there are only "consolidation" and "production" tabs. But the CORE-Part is excluded from transport to the follow-on-track, there I can only see the UI-Part. Does that mean that I only have to transport the UI-Part to the follow-on-track? Or should I do a manual transport of the CORE-Part to the follow-on-track?
Thank you in Advance,
Stefan -
Packages and software components
Hi everyone:
I'am having problem with an interface going to my XI-system. This interface works OK in another XI-system, because of that I think the problem are the packages or the software components installed in my XI-system.
Can somebody tell me if this two configuration are compatible?the levels(010,009...) are importants????
My XI-system patches:
__________________My XI______________________________
SAP_BASIS 640 0010 SAPKB64010 SAP Basis Component
SAP_ABA 640 0009 SAPKA64009 Cross-Application Component
PI_BASIS 2004_1_640 0006 SAPKIPYI66 Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW 350 0009 SAPKW35009 Business Information Warehouse
______________The another one XI________________________
SAP_ABA 640 0015 SAPKA64015 Anwendungsübergreifende Komponent
SAP_BASIS 640 0015 SAPKB64015 SAP Basiskomponente
PI_BASIS 2004_1_640 0010 SAPKIPYI66 Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW 350 0000 - Business Information Warehouse
ThanksHi:
The error in the sm21 is the following:
<b>Transaction cancelled IDOC_ADAPTER 601 (SAPGET 100)</b>
in details I can see this:
<b>No sevice for system SAPGET, client 100 in Integration directory. No documentation exist for message ID601.</b>
In The sld and in the integration diretory is created this bussiness system. -
Blogs,Forums Relating to SLD and Software Components
Hi People,
I have recently joined the integration space in SAP XI, I want to understand XI from the basics, I am very much unclear on the SLD, software components, software component versions, technical and business system concepts. Request you to please share me with forums and blogs relating to the same.
Thanks
Varun.HI,
Refer
SAP Network Blog: SLD: General recommendation how to set up the system landscape directory
SLD: General recommendation how to set up the system landscape directory
SAP Network Blog: An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
System Landscape Directory of SAP NetWeaver 7.1 User Manual
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
System Landscape Directory of SAP NetWeaver 7.1 - Post-Installation Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/500519bb-75bd-2a10-c9b7-878798ae52bc
System Landscape Directory: Planning Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582
Architecture Overview of the SLD Data Suppliers
http://help.sap.com/saphelp_nw04s/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/frameset.htm
System Landscape Directory
http://help.sap.com/saphelp_nw04s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/content.htm
Thanks
swarup
Edited by: Swarup Sawant on Aug 12, 2008 8:34 PM -
Hi Experts,
How Do We Know which Product We have on Our Machine And Which Components Are Installed And Their Versions ????
Please Let Me know the Process To get Al these Details ,,,,
Regards
KhannaHi Rajesh,
Go through the following link:
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/frameset.htm
Reward points if helpful.
Regards,
Renuka. -
PRODUCT AND SOFTWARE COMPONEBT VERSION
Hi Gurus,
I am using SAP PI 7.0 with SP .
Actually i have to create one product with my own name and one SWCV with name E-FILING GB.
But this SWCV already exist in SLD.
Now I am uing this SWCV and SAP HR 6.0 in IR by importing it from XI Standard Content.
In ID, I am using Integration Scenario by importing it from IR. Where I can get one application component SAP ERP 6 and one Templet with two different roles.
I have assinged one Business system to SAP ERP 6 application component on A2A tab and one party and one service on B2B tab.
And two Business services to other party.
I have added SWCV SAPHR 6.0 to SAP ERP 6 Standard pruduct in SLD.
But any where I not using the product which I created in the SLD.
What is the impact of this on the ID objects?
How to add a existing SWCV to the product which I created in SLD?
Regards
SreeniHi,
>>What is the impact of this on the ID objects?
>>How to add a existing SWCV to the product which I created in SLD?
create your own product and own SWCV
then if you want to use objects from any standard SWCV just
add dependecies and you will be able to reuse objects from those
standard
that's how you should do it
Regards,
Michal Krawczyk -
Software Components and Products
Hi,
I am new to XI.
There are many software components and products available in SLD. I wanted to know which site should I visit to determine the functions or get details of each products and software components.
EdwardHi,
about Software Product and component go thru this part of SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
All standard SAP products and software components are shipped by SAP (SRM etc)
If you are planning to create a customer speicific components for the SAP SWCV, then create your own thridparty product based on SAP product, and then work on it. Now you can use dependency if you want make use of standard SAP delivered content.
Generally , thirdparty product is created based on the vendor and all the swcvs are created under that. Then all IR objects follow the same.
Have a look into this blog to get some hints-
/people/thorsten.nordholmsbirk/blog/2006/07/25/structuring-integration-repository-content--part-1-software-component-versions
regards
manoj kumar -
Software Components for XI in SLD.
I'm starting with my first project in XI, and I have the following doubts.
The SAP ERP systems are loaded as Technical Systems into the SLD with their products and software components, which are contents of Content Repository of the SLD. If, for example, I have to develop a scenario in XI to integrate my SAP ERP system with a legacy system, if I create a new Software Component version to create the XI design objects I need for the SAP ERP side, should I create and assign a new Product version with this SWCV to my SAP ERP Technical System, or I could use it without doing that, and make the connection with the system directly in the Integration Directory?
If anyone has information or tutorials about best practices for creating Products and Software Components depending on the scenario to develop in XI, that would be a lot of help for me.
Thanks in advance
Sebastian Pereira.Sebastian,
-->if I create a new Software Component version to create the XI design objects I need for the SAP ERP side, should I create and assign a new Product version with this SWCV to my SAP ERP Technical System, or I could use it without doing that, and make the connection with the system directly in the Integration Directory?
Yep you can ...Software component takes part only in design time...at configuration time You need to import the Business system in Integration Directory..
Configuration time activity:
1. Create Technical and Business systems in SLD( Business system should be associated with this Technical system only)
2. Now import Business System from tool menu item of ID
3. Right lick and Create a scenario in ID
5. Under this scenario you can see the configuration objects you need to configure an create..these objects
PS : Don't forget to activate the objects in ID
Let me know if you want further clarification of thoughts..
Regards, -
Problems creating software components in SLD
Hi,
I am using <b>NW2004s SP06</b>.
While configuring NWDI, I was defining Product and Software components in the SLD.
1) I am unable to create products for SAP Systems in the catalog. Whenever I select a new product the message always says new product for non-SAP system.
2) <b>I am unable to create software components for products for non SAP systems. Whenever I try adding new software components I get an error on the production state</b>
<b>Value not allowed by VALUEMAP for property SAP_SoftwareComponent.ProductionState:Released</b>
This is the same error when I choose all the listed Production states: (Eg: Planned, Developed etc)
Please helpForgot to add..
Application Server-Java (J2EE engine), DI, SLD etc are all on a single machine..
Maybe you are looking for
-
I cannot save a photo on my new iPad (from Path) to iPhoto. The phot appears to download but then does not appear in iPhoto. I can perform the same task with my old iPad. I can also save an emailed photo to iPhoto. Thanks
-
Message scheduled in SXMB_MONI(Queue status is stoped)
Hi experts, Here my scenario is Proxy to file. I am sending the 20 .. 30 ..messages at a time from ISU system using proxy to XI. In ISU sender system Under sxmb_moni some messages are failed with errors. after this all messages are in scheduled mode(
-
When I try to shuffle certain playlists (On the Go and Purchased), for some reason only some of the songs get shuffled and the rest are left out. For On the Go, it will shuffle about 2/3 of the songs in the playlist, and for Purchased, it will only s
-
Show a picture in a front panel
Hello All, I want to display a image (that is in another front panel) when i press a buttom in the main front panel. Then I want to close the image clicking in a buttom in the second panel and return to the fist front panel. I don´t know how to do it
-
Ok, if I cant get it working now then I will be abandoning every single cf app, and switching to something else. Just for principal. First, I have been trying to get CF8 to work on RH4 ever since beta, no luck. Fine. I switched to RH5 and it still do