Date option in stock reversing program(SAP NOTE 175842)

Hi Gurus,
We have prepared a program with SAP NOTE 175842 for reversing stock posting.My client has done GR in march 09 and quality peoples have posted to unrestricted stock in same month.Now because of some reason stores person want to cancel GR. So we have reversed the posting for the lot in April using the programme.Now when stores person try to cancel GR in month of march system is giving error "Deficit of SL St.in QI prev. 14.800 MT ".Because we have reversed the posting from unrestricted to quality in april and we are trying to cancel GR in March system is giving above error.
Is there any settings such that in stock reversing program we can enter the date, so that on a particular date we can reverse the stock.Because in current situation we can enter lot no. only or is there any other solution to overcome this situation
Regards
Amit

hi amit
Yes system will not allow you to cancel GR for March when Reversal stock posting was done in April.
Because it will consider the status of stock when GR was made.
Which movement type you have used for reversal From Unrestricted to Quality.
Was it the activation of 08 & then 322.
If it is so then cancellation of GR will not take place through original GR document(as it is in unrestricted), It will give error msg if you give reference of same.
Even GR can not be cancelled based on 08 inspection lot as 08 is not wrt PO.
Just asuggetion explore User Exit
QEVA0008 Usage decision: Customer function key (e.g. to cancel UD)
Sujit

Similar Messages

Data objects in a Unicode program are not convertible?what does this mean?

hello,everyone,
when I execute a smartform directly in the transaction smartforms.,the result can be seen just no data.
when I execute program to transfer two internal tables from interface with data to the smartforms,and I use tcode st22,
the error is : Data objects in a Unicode program are not convertible.
the error analysis; The statement
"MOVE src TO dst"
requires the operands "dst" and "src" to be comvertible.
the source code that error occurs is :LOOP AT I_SHIP_DETAIL INTO WA_DETAIL .
and I know that the internal table have errors ,I defined the internal table refer to a structure created myself,and I set break-point in the smartforms ,can see the data in the internal table ,so why occurs such errors ,pls help me if you know .thank you in advance.

hi
good
go through this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50
thanks
mrutyun^

I want to delimit the date of table v_t7int1 for new sap note uploading

Hi
i want to delimit the date of table v_t7int1 for new sap note uploading. wtihout delimit the date i can't create new note for the year 01.04.2009 to 31.12.9999
Anjali

Hi
When i select the slab code sl10 and press delimit button system is asking the From Date and i want TO DATE and i have to Delimit the date of slab code SL10, SL11,SL12 and SR02 and then i have to create SL13,SL14 and SL15.
Anjali

Regarding reversing a SAP note

Hi all ,
I implemented SAP note 921164 ( for MB51 performance improvement) .System suggested few other notes to be implemented as a prerequisite and I did the same. Right now , I want to cancel all the SAP notes implemented and implement only 921164 again. Is it possible to do the same ?
When I go to transaction SNOTE and click on "Cancel SAP note implementation", it doesn't work ; as any note I click on it says - This note has been installed as a prerequisite , so cannot be reversed. Any clues on how to go about reversing the effects of such inter-dependent SAP notes ?
Regards,
Deepthi

Hi,
In fact you can't directly reverse a payment document.
first you need to reset in FBRA and then it should be reversed in FB08.
Any way for your question, please find my answer.
if you want to reverse a reversal document, go to FBR2 and enter your document no.,company code and fiscal year.
select the generate reversal posting check box under flow control. it will be reversed.
Thanks,
ANJI REDDY

Error: Data objects in a Unicode program are not convertible.

Hi All,
I'm getting an above error while appending a record from field-symbol work area to field-symbol internal table.
Please let me know how to resolve this.
Thanks & Regards
Santhosh

Hello Santosh
Apparently the structures of your work area and that of your itab are not (exactly) the same. This kind of sloppy coding is no longer possible on a Unicode system.
You may try the following approach:
" <ls_workarea> : work area having structure A
" <ls_record>: line structure B of your itab
" <lt_itab>: itab having line structure B
CALL METHOD cl_abap_container_utilities=>read_container_c
 EXPORTING
 container = <ls_workarea>
 IMPORTING
 ex_... = <ls_record>.
APPEND <ls_record> TO <lt_itab>.
If this approach fails you may try to use a string variable as intermediate, i.e.
1. Move <ls_workarea> to LD_STRING (using static method FILL_CONTAINER_C)
2. Move LD_STRING to <ls_record> (using static method READ_CONTAINER_C)
Regards
Uwe

ERROR while checking standard program for SAP NOTE 175482(QM)

HI,
experts
i am implementing sap note 175842 QM MODULE .
My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
but in se38 report comes like this
REPORT RQEVAC50.
REPORT RQEVAC50 MESSAGE-ID QA.
so while checking error comes boz 2 report hedaing is there .
I WANT TO DELETE FIRST ONE BUT IT CANT.
I chose activate anyway but while releasing request it gives error.
THANKS
AJAY.

hi
error is 'OBJECT REPS RQEVAC50 does not exit create it'**
I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
THATS THE MAIN PROBLEM.
Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
so there are 2 report hedaing .
THANKS
AJAY.

When trying to download a program I am not given the option to run the program only to save or cancel. a pop up screen appears the download is loaded and I have to double click on it to actually download it into my computer. Is this normal

I switched from using IE and when downloading programs through there a windows always popped up asking to run save or cancel the file. With Firefox it only gives me the option to save or cancel and when pressing save a pop up window appears and the file is then downloaded to that. Then I have to go to it and double click to run it. I do not always want to save everything only run some things. Is there a way to change this. it seems like I am double downloading, first to the pop up window then into my computer instead of straight into my computer. is there a faster better way to download. This also eats up my download allowance from my internet satellite company this way.

When you '''Save''' a download to your hard drive, your Anti-virus/Asnti-spyware application has an opportunity to examine the file before it is installed on your system.
When you '''Run''' a download you could be installing an item containing a virus or spyware to your system before your AV/AS application has an opportunity to examine the file(s).
If you are willing to accept the risks associated with '''Run''', see the following extensions ('''NOTE: neither has been reviewed by the Mozilla Add-ons group'''):
*https://addons.mozilla.org/en-US/firefox/addon/10329/
*https://addons.mozilla.org/en-US/firefox/addon/10902/
 
You have an item installed that is considered malware/spyware/adware. To see the Plugins reported with your question, click "More system details..." to the right of your original question or, on the Firefox menu, click Tools > Add-ons > Plugins.
*My Web Search Plugin Stub for 32-bit Windows
This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
#You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
#*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
#*See:
#**http://www.safer-networking.com/removemywebsearch.php
#**[http://www.pchell.com/support/mywebsearch.shtml PC Hell: My Web Search Removal Instructions]
#**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
#Also see: http://kb.mozillazine.org/Uninstalling_toolbars
#'''You '''MAY''' need to change a preference''' if when typing one or two words in the URL/Location/Address Bar sends you to some search page other than the one you expect. To reset your default URL/location bar search provider:
#*Enter '''about:config''' in the address/URL bar and press the Enter key
#*If you see a warning, accept it (Promise that you will be careful)
#*Filter = keyword.URL
#*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
#*Restart Firefox (File > Restart Firefox)
#*See: http://kb.mozillazine.org/Keyword.url
#'''You '''MAY''' need to reset your homepage''' if some search page that you do not want or expect opens when you start Firefox. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
#*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
**Per Oracle/Sun, Java version 1.6.0_23 is mainly a stability improvement update
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Performance credit master data (FD32)--SAP Note 705317

Hi,
When running the FD32 tranasaction,I am changing the credit account and saving the transaction...it is taking quite a long time and going for dump....TIME_OUT error.
The appropriate notes for this problem are 705317 and 9937.
I shall give the details details of the note.
SymptomLong runtimes occur for the reorganization of credit data in SD documents.
This reorganization can occur in two situation:
- You start report RFDKLI20.
- You create or change credit master data in Transaction FD32.
Reason and PrerequisitesIn the credit management, you change assignments in Customizing or create or change
credit master data. The transfer of the changed settings into existing SD documents
requires a reorganization of these documents.
The reorganization is triggered from Transaction FD32 or using report RFDKLI20. Since
the relevant partner function in the credit management is the payer, all open sales
documents for a payer are selectedfor the reorganization.
The selection is performed within function module SD_CREDIT_RECREATE, which is called
from both Transaction FD32 and report RFDKLI20.
The documents are selected according to one of the two following options:1. Partner index VAKPA
The relevant documents are selected via partner index VAKPA. In index table VAKPA,
the system updates all SD documents for a customer number in dependency on the
partner function. All documents for a payer can be determined using index table
VAKPA.
CAUTION: Partner index VAKPA is only updated if the corresponding partner
functions and transactions are activated in Customizing table TINPA. Table TINPA
does not provide any update for the payer partnerfunction in the standard system!
2. Document table VBPA
If the update for the payer is not active in table TINPA, the relevant documents
are selected via application table VBPA. Table VBPA contains the used partners
(customer numbers) for SD documents.
The access to table VBPA with the customer number of the payer requires a long
SAP Note Nr. 705317 07.02.2008 Page 1
runtime because the customer number is not a key field in table VBPA. It might
result in a TIME_OUT.
Solution
Due to the technical conditions described above, there are two possible solutions for
runtime problems in Transaction FD32 or with report RFDKLI20:
1. Activate the update of index table VAKPA for the payer partner function:
Activate the update of index table VAKPA for the payer partner function by
creating an entry with transaction = 0, partner function = RG in table TINPA. You
can use Transaction SM31 for that.
Subsequently, a reorganization of index table VAKPA is absolutely required!! You
can execute the reorganization with report RVV05IVB. Note that all existing SD
documents thus also those ones already closed are indexed again by this report.
Depending on the number of your documents in the system, this can result in a
runtime which is correspondingly long. Therefore test this beforehand in a copy of
your production system!
2. Create a database secondary index for table VBPA:
If a reorganization of index table VAKPA is not possible or not wanted, you can
optimize the access via document table VBPA. For that, create a database secondary
index for table VBPA.
We cannot provide a general recommendation on how you have to define the secondary
index in detail. This basically depends on your dataset.
Use the SQL trace with Transaction ST05 in order to analyze the access onto table
VBPA within function module SD_CREDIT_RECREATE. Then define a suitable database
secondary index for table VBPA according to your analysis results.
For example, you could create the secondary index for VBPA fields KUNNR and PARVW.
Test the new secondary index by creating an SQL trace with Transaction ST05 again
in order to check the effectiveness of the database access and the runtime.
Also take the related notes into account.
Use Note 99937 to avoid the automatic reorganization - and thus runtime problems - in
Transaction FD32. Note that this does not solve the runtime problem during the
reorganization in general, but shifts it to RFDKLI20 which you can schedule as a job.
Thus, you are not disturbed by the runtime problem.
Please can anyone help me as to in which table and what fields i need to take to create secondary index.Thank you,
madhu.

Hi
Instead of creating Indexxes u contact basis to increase the the time limit for the execution
Regards
Shiva

SAP Note Number: 852443 | Runtime Error MESSAGE_TYPE_X in Data Source over HANA Source System

Hi,
I am facing an issue for Inconsistency in Delta extraction due to a Init Request Mismatch.
I found out an SAP Note 852443 for the same and it provided me with a workaround solution for the same.
But , this Issue is frequently reappearing for the same Data Source and I need to find a permanent fix/solution for the same.
Kindly help me in this.
Thanks,
Vimarsh

Hi.....
I have gone through the SAP note......what I have understood I will explain you....
1) You need to compare the Init request (ex : REQU_44H2K09BTG5799G2JXCORI1O5) in both BW and R/3 side....both should be same......
In the R/3 side the value of the field : RNR of the table :RSSDLINIT should match with the value of the field : INITRNR of the table ROOSPRMSC in the R/3 side.....
2) If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).........this step is very simple.......
3) But the confusion arrise when value is there in the table RSSDLINIT in the BW side.......then check the same Request number in the table ROOSPRMSF and ROOSPRMSC tables with the INITRNR field.
If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers...............it means if the value doesn't match or multiple values are there then also same solution ...........i.e...........use transaction RSA7 in an OLTP source system to delete all entries ...............then use the Program : RSSM_OLTP_INIT_DELTA_UPDATE and then delete all init selections in the 'Scheduler/Init selections in the source system' menu in the InfoPackage.......
4) But if it is a DataMart datasource that is a Export Dtasource then the solution is different.........starting with 8
But I don't want to confuse you.........first check whether is is a Export Datasource or not.....
Regards,
Debjani.....

SAP Note for XD99 : Data changed but Output screen show error message

This is regarding the XD99.. Mass data update.
I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
Is there any Sap Note for this.
Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
Moderator message: please have a look in the Service Marketplace yourself.
Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

Hi there, gwinslo. You have come to the right place.
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
This is not a cure but will make it easier if Firefox locks up.

I did the last software upgrade for iphoto, It goes thru a 9 step process. Mine is stock at step 5 99% complete. It has been that way for 1 week now. I have in excess of 62 k pictures. Program is not stock. Any advice?

I did the last software upgrade for iphoto, It goes thru a 9 step process. Mine is stock at step 5 99% complete. It has been that way for 1 week now. I have in excess of 62 k pictures. Program is not stock. Any advice?

force quit, Back up your iPhoto library, Depress the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN

I have been using a free trial of photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

Try boot into Safe Mode and try again.

My ipad is not showing the apn settings when i selected cellular data option on settings? y?

my ipad is not showing the apn settings when i selected cellular data option on settings? y?

pvonk, you were right, something was amiss. It is just a shared calendar (me and my PA) and nothing I could do would seemingly connect the iCal and cloud accounts.
Late last night I upgraded from OSX 10.7.4 to 10.7.5, as I thought that might resolve some settings or minor corruptions in the way my Mac Book was working.
This morning I opened iCal, and once again it attempted to refresh the page. And a few seconds later my iCloud diary appeared on iCal.
The moral of this issue is I think as follows.... when you check all the settings and follow all the advice, and something like this is still not working then it could be the software is slightly corrupt, so a re-install or applying an update (if there is one available) will help resolve issues.
So spot on advice, something was amiss and is now resolved thanks

How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.

Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki

Date option in stock reversing program(SAP NOTE 175842)

Similar Messages

Maybe you are looking for