Duplicated records in Master Data Attribute Load

Hi All,
I'm getting the following errors during a masterdata attribute load:
*1 duplicate record found. 8 recordings used in table /BIC/QEMP_IPF
From my experience, when this error happened to other loads, I can make it go away by changing the infopackage setting to update to PSA and then to InfoObject (package by package). However for this load, I have already selected this infopackage setting and the error is still happening.
Can anyone advise me on how to troubleshoot this further? Thanks.
Regards,
KM

You selected option 1 from IP, select option 3 under processing tab.
IP->processing->only PSA+ select Update Subsequently to Data Target + select ignore double data records
Hope it will work fine.

Similar Messages

Ignore duplicate records for master data attributes

dear experts ,
how & where can i enable "ignore duplicate records" when i am running my DTP to load data
to master data attributes.

Hi Raj
Suppose you are loading master data to InfoObject and in PSA you have more than one records for Key.
Let's assume you are loading some attributes of Document NUmber ( 0DOC_NUMBER) and in PSA you have multiple records for same document number. In PSA this is not a problem, as Key for PSA table is technical key and which is different for every record in PSA. But this is a problem for InfoObject attribute table as more than one records for primary key ( here 0DOC_NUMBER) will create Primary Key consraints in database.
This issue can be easily avoided by selecting "Handle Duplicate Records" in DTP . You will find this option under *update" tab of DTP.
Regards
Anindya

Request Status for Master Data Attributes Load

Dear All,
We are trying to load attribute master data and volume of which is relatively huge around 10,000 records.
We are facing challenge while updating attribute data from master data info object , the load status remains in yellow status and when we went to details screen it states that data is transfered to transfer rule . ( it has been loaded successfully in to PSA).
Could anybody please give some hint on this challenge ??
Regards
Kapadia

Hi Paolo Siniscalco,
You are right, as number of records are more , i have chosen update of "Only PSA" and then "Subsequently in Data Targets".
I tried other option also which is infopackage schedule "Execute in Back ground" and
"Request batch process runs untill all data is updated in BW". And process went in to infinite loop.
Some how i am not able to track out why the request status is not changing .
Regards
Kapadia

Master data Attribute Load failure issue

Hi ALL:
While trying to load Attribute and text of a Infoobject from a ODS, the text load is going through fine,but The attribute Load is failing everyday due to duplicate issue and it is showing the below messages.
2 duplicate record found. 77 recordings used in table /BIC/PZPLANITEM
2 duplicate record found. 77 recordings used in table /BIC/XZPLANITEM
ZPLANITEM is the infoobject name.
So, we are deleting the failed request from the Attribute manage screen and running the infopackage once again.Now, the Load is going through fine.
can anyone help me why this is happening.
If anyone want any more information, Do write to me.
it wiil be a great help for me.

Hi Chandrashekara,
In BW 3.5 , i could not find out any such options in infopackage level.
Can you check in the system whether it exists or notand come again in deatil.
I really cound not find out anything in system.
thanks for your Prompt reply .

0 records in master data delta loads.

We have activated delta on 0CUSTOMER_ATTR and verified the queue is active in RSA7. However the delta load is not fetching any records. A full load, however, does. I have deleted and reactivated the delta init multiple times with no success
The infopakage error monitoring status has the following messages
<i>No new data since the last delta update
Diagnosis
The data request was a delta update, meaning, the data basis in the
source system has not changed since the last update.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.</i>
Thanks in advance.
D

hi ok first check what Ajay said the BD61 if it is activated in R3.
After that go to roosgen fill in the name of the DS 0custmer_attr select the line with the R3 from which you want to extract data.
Copy the message type.
Then after you have made the change (update or creation) go to table cdhdr and cdpos to get the change doc object, table name and field name.
After that go to bd 52 paste your message type and add the entry for in your case for the phone number in communication tab
chge doc ADRESSE table : ADR2 field name : TEL_NUMBER
Launch the delta it should work.
In fact when you go to bd52 you will see the fields that are entered for the fields to be taken into consideration when an update is made (they are mainly based on the chge doc obj DEBI) so if you need more fields add them in function of your needs and the info you get in cdhdr and cdpost when you do changes. You can do this only manually so take care of repeating these steps in QA and in prod.
Hope this could help you to solve your issue.
regards
Boujema

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Read from master data attribute

Hi BI experts,
Here is a challenging question.
One of the FIGL infoprovider do not have infoobject 0company. Added 0company and set up update type 'overwrite'. Update method 'Master data attribute'. So 0company should read from the master data attribute of 0Comp_code.
Master data attribute loaded for 0comp_code. Did transaction data load for FIGL infoprovider.
But 0company is blank in FIGL ODS.
Any thoughts..
Thanks in advance

It should ideally pull the 0company, Otherwise try doing it thru Start routine ..
Create an internal table, pull company code and company from the master data table of Company code into this table.
Read from this table in your update routine and corresponding to the company code read the company and populate in your ODS.
It will also be better in performance compared to a master data look up !!!!!!!
Regards.

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

No Master Data Attributes Value Loaded

Hi
   I have a custom Master Data Info Object which gets it feed for a simple master data attribute data source.
    However none of the Master Data Attributes actually are populated though my request load is successful.
    I get 144913 records transferred but only 78596 added. Despite this I have not a single attributes value populated.
    Could the reason the data is dropping because I have 3 key fields in my datasource VIEW but only 1 Key defined in the Update Rule ? If yes, how can I change the Update Rule to include more Key Fields ?

Hi Chris
I request you to check the transforamtion between your data source and data target once again.
When loading to data target, according to your transformation only the records will be updated to your data target. But all the records will get populated.
Yes, Key fields are also one reason, if the duplicate rows being populated.
Compare your data target data & RSA3 Extractor checker.Whether the duplicate records being added together or not
Regards
Saravanan.ar

Loading master data attributes

Hi.
When I am loading master data attributes, DTP process takes long time (approximately 30 minute) .
Although records count is just 193.
What may be a reason of this?
Information about system:
Software component   Release    Level
SAP_ABA                      700          0023
SAP_BASIS                   700          0023
SAP_BW                        700          0025

Hi...
Check the Package size in the DTP......try to increase or decrease it.....if it makes any differerence......
Secondly....in the DTP in the tab "Update" select the option " Valid records update, No reporting"....then the "Semantic Groups" in the tab " Extraction" will work.....it will improve the performance....
Regards,
Debjani........

Where to set lock while loading master data attributes

Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.

Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks

Cant fully load updated data to Master data attribute

Hi BW expert,
I meet an issue here, I am not able to load updated data to master data attribute. My loading selection is based on employee number range.
e.g employee number 00001 to 10000
However the data is successfully loaded to master data but lot of the attribute data are not updated. e.g 056, 057, 098, 0100.
I checked in PSA, there is no data updated for the attribute.
I checked in RSA3 in R/3, there are attribute data extracted.
Please advice, why attribute data is not updated when I load it in a range number. The attribute only work when I load one employee number.
Thanks.
regards,
Wesley Koo

check this:
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Hope it helps..

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Duplicated records in Master Data Attribute Load

Similar Messages

Maybe you are looking for