During installation 11.5.10.2 got some errors but installation done success
Completed: CREATE CONTROLFILE REUSE SET DATABASE "PROD"
LOGFI
Tue Sep 25 16:22:00 2007
alter database open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 21687325
Resetting resetlogs activation ID 0 (0x0)
Tue Sep 25 16:22:02 2007
Assigning activation ID 46075814 (0x2bf0fa6)
Thread 1 opened at log sequence 1
Current log# 2 seq# 1 mem# 0: /home/oratest/proddata/log02a.dbf
Current log# 2 seq# 1 mem# 1: /home/oratest/proddata/log02b.dbf
Successful open of redo thread 1
Tue Sep 25 16:22:03 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Sep 25 16:22:03 2007
SMON: enabling cache recovery
Tue Sep 25 16:22:05 2007
Successfully onlined Undo Tablespace 1.
Dictionary check beginning
Tablespace 'TEMP' #2 found in data dictionary,
but not in the controlfile. Adding to controlfile.
Dictionary check complete
Tue Sep 25 16:22:06 2007
SMON: enabling tx recovery
Tue Sep 25 16:22:06 2007
Database Characterset is US7ASCII
Tue Sep 25 16:22:31 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: alter database open resetlogs
Tue Sep 25 16:22:35 2007
alter tablespace TEMP add tempfile '/home/oratest/proddata/temp01.dbf' REUSE
Completed: alter tablespace TEMP add tempfile '/home/oratest/
Tue Sep 25 16:22:36 2007
ALTER DATABASE RENAME GLOBAL_NAME TO "PROD.test.com"
Completed: ALTER DATABASE RENAME GLOBAL_NAME TO "PROD.test.co
Shutting down instance: further logons disabled
Shutting down instance (immediate)
License high water mark = 5
Tue Sep 25 16:22:38 2007
Errors in file /home/oratest/proddb/9.2.0/admin/PROD_apps/bdump/prod_j001_483564.trc:
ORA-12012: error on auto execute of job 104
ORA-22303: type "APPS"."WF_PARAMETER_LIST_T" not found
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
Tue Sep 25 16:22:38 2007
Errors in file /home/oratest/proddb/9.2.0/admin/PROD_apps/bdump/prod_j001_483564.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-12012: error on auto execute of job 104
ORA-22303: type "APPS"."WF_PARAMETER_LIST_T" not found
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
Tue Sep 25 16:22:38 2007
Errors in file /home/oratest/proddb/9.2.0/admin/PROD_apps/bdump/prod_j000_479468.trc:
ORA-12012: error on auto execute of job 48
ORA-22303: type "SYS"."AQ$_SIG_PROP" not found
ORA-00604: error occurred at recursive SQL level 3
ORA-01089: immediate shutdown in progress - no operations are permitted
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 1
Tue Sep 25 16:22:42 2007
ALTER DATABASE CLOSE NORMAL
according to above error i checked the missing types.
("APPS"."WF_PARAMETER_LIST_T" &
"SYS"."AQ$_SIG_PROP")
i checked in dba_objects the above objects are there
and that are valid. And also i restarted the
application tier and dbtier thats working fine.Since objects are there and status is valid, and your application/database work perfect, then they should not have any concern. As long as you have no issues, then it is safe to ignore error/warning messages during the installation/upgrade.
I have nothing documented here which would be helpful as a proof, but you may raise a TAR/SR to confirm that.
Similar Messages
-
Install companion CD, got some error
Hello,
I just installed companion CD. my pc os is windows xp 2002In the step of Availabe Product Components
Oracle Database 10g Companion Products
There are two components:
1. Apache Standalone
2. HTML DB
I chose both to install, and the installtion was sucessful.
Now when I type http://myIP:7777/, it shows oracle http server interface.
When I go to OUI, I found there is porduct called : HTML DB 10.1.0.2.0. Is this HTML DB2.0 ? I don't think so. I need to install html db 2.0, so I disinstall the html db from OUI and follow the following link to remove html db component,
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm
now I type http://myIP:7777/, it shows "can not find server". How to start oracle http server?
Should I disinstall companion CD? install it again?
Thanks for your help!!
EmilyEmily,
CAN YOU PLEASE STOP POSTING THE SAME QUESTION IN DIFFERENT THREADS AND READ THE ANSWERS THAT PEOPLE GIVE YOU?
Members of this forum really want to help you and are spending valuable time reading your posts and providing answers. If you keep moving the target, we'll never get to a solution and you'll continue to waste people's time.
You have created these threads on the same topic in the last 24 hours:
install companion CD, got some error
install companion CD, got some errors
does companion CD incldues the installation HTML DB2.0? please help answer.
Instell HTML DB 2.0 error: unable to open file "htmldbins.sql"
Please SLOW DOWN and READ. Read this thread:
does companion CD incldues the installation HTML DB2.0? please help answer.
And try the suggestions provided. Post your findings back to the SAME THREAD.
Good luck,
Sergio -
We got some error while fetching your calendar events.
We got some error while fetching your calendar events. Please try again. Please try again.
Suddenly I receive the above message and cannot access my calendar list of events although the calendar itself is displayed. I have closed down several times but the message persists.I am using MAC OSX Snow Leopard/ Firefox 4.01I have this same problem. Using XP Home SP3 and Firefox 8.0
-
My iphone 5 became dead during working. I have tried all the possibilities but with no success
My iphone 5 became dead during working. I have tried all the possibilities but with no success. Nothing appears when we connect it with itunes. I have even tried pressing home and switch button together. Kindly help me.
Are you sure that it has a charge? Try leaving it connected to it's wall charger for a while and then see if it will start up.
Best of luck. -
How can I find my iPod touch that got lost ? But I don't have the Find my Phone app .
How can I find my iPod touch that got lost ? But I don't have the Find my Phone app .
Please , help me ..- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I need help to run this package and i got some error
create or replace
PACKAGE BODY SUBS_INS_API_sun
AS
PROCEDURE SUBSCRIBER_INS_sun
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidactdvcdetailsobj_sun,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
pragma exception_init(Input_Parameter_Is_Null,-2000);
prepaidAccountDetails prepaidActDevDetails_tab:= prepaidActDevDetails_tab(NULL,NULL,NULL,NULL,NULL);
STATUS VARCHAR2(1):='1';
cust_no VARCHAR(10);
m_mac_id VARCHAR2(20);
subscriber_master_Rec subscriber_master%ROWTYPE :=NULL;
flg NUMBER(1);
BEGIN
IF(Source_Sys_Id IS NULL OR Tracking_Id IS NULL OR ACCOUNT_NO IS NULL OR prepaidAccountDetails.LAST=0) THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
select cm_cust_no into cust_no from customer_master where cm_cust_id=ACCOUNT_NO and cm_status in('A','P','0');
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:='0';
END;
BEGIN
FOR i IN prepaidAccountDetails.FIRST .. (prepaidAccountDetails.LAST) LOOP
prepaidAccountDetails1:=prepaidActDevDetails_tab(i);
prepaidAccountDetails1.Status_of_device:='1';
IF (prepaidAccountDetails.Account_id is NULL OR prepaidAccountDetails.Mac_Id is NULL or prepaidAccountDetails.LOB_value is NULL) THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF(prepaidAccountDetails.LOB_value = 'VDO') THEN
IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
END IF;
begin
select 1 into flg from subscriber_master where pm_phone_no=prepaidAccountDetails.Mac_Id and pm_status in('P','0','A','B');
EXCEPTION
WHEN NO_DATA_FOUND THEN
flg:=0;
END;
if(flg=1) then
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;
begin
select md_mac_id into m_mac_id from mac_details where md_mac_id=prepaidAccountDetails.Mac_Id and md_start_date<=sysdate
and md_status='A';
EXCEPTION when OTHERS then
Error_code :='SI004';
DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
end;
if(STATUS= 1 and prepaidAccountDetails.Status_of_device='1') then
SELECT PM_SUBS_ACT_NO_SEQ.nextval
INTO subscriber_master_rec.PM_SUBS_ACT_NO
FROM dual;
subscriber_master_Rec.pm_phone_no :=prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date :=sysdate;
subscriber_master_rec.pm_status :='P';
subscriber_master_rec.PM_CUST_LVL_YN:='S';
subscriber_master_rec.PM_EQUP_CODE:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_HOME_AREA:='HOM';
subscriber_master_rec.PM_USG_CODE:='USG';
subscriber_master_rec.PM_NO_TYPE:='S';
subscriber_master_rec.PM_TCG_CODE:='DEF';
subscriber_master_rec.PM_APLN_DATE:=sysdate;
subscriber_master_rec.PM_USER2:=prepaidAccountDetails.LOB_value;
subscriber_master_rec.PM_USER3:=prepaidAccountDetails.Channel_Line_Up;
subscriber_master_rec.pm_cust_no:=cust_no;
INSERT INTO subscriber_master VALUES subscriber_master_rec;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_sun;
END SUBS_INS_API_sun;
and
i got this error
Package Body PREPAID_TESTNEW.SUBS_INS_API@PREPAID_TESTNEW
Error(73,4): PL/SQL: Statement ignored
Error(73,99): PLS-00302: component 'LAST' must be declared
Error(87,6): PL/SQL: Statement ignored
Error(87,37): PLS-00302: component 'FIRST' must be declared
please help to run this package if anyone knowsnow i corrected my package. It working fine. But, how to run this package via procedure. my procedure check below. I give all the details about my package check below.
---pkg specification
create or replace
PACKAGE SUBS_INS_API_SS
IS
PROCEDURE SUBSCRIBER_INS_SS
(SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2);
END SUBS_INS_API_SS;
-----pkg body
create or replace
PACKAGE BODY SUBS_INS_API_SS
AS
PROCEDURE log_error (ip_code IN VARCHAR2,
ip_message IN VARCHAR2,
ip_description IN VARCHAR2)
IS
BEGIN
INSERT INTO ERR_LOG (IEL_REF_ID,
IEL_DATE,
IEL_CODE,
IEL_MSG,
IEL_DESC)
VALUES (IVRS_ERR_LOG_SEQ.NEXTVAL,
SYSDATE,
ip_code,
ip_message,
ip_description);
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END log_error;
PROCEDURE INSERT_WS_LOG (SOURCE_SYS_ID IN VARCHAR2,
STATUS IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_ID IN VARCHAR2,
MAC_ID IN VARCHAR2)
IS
ws_log_rec WS_LOG%ROWTYPE := NULL;
BEGIN
SELECT WS_LOG#REC#ID.NEXTVAL INTO ws_log_rec.rec#id FROM DUAL;
ws_log_rec.VER#ID := 1;
ws_log_rec.CRE#TS := SYSDATE;
ws_log_rec.wl_source := SOURCE_SYS_ID;
ws_log_rec.wl_status := Status;
ws_log_rec.wl_tracking_id := tracking_id;
ws_log_rec.wl_account_id := account_id;
ws_log_rec.wl_mac_id := mac_id;
INSERT INTO ws_log
VALUES ws_log_rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END INSERT_WS_LOG;
PROCEDURE REPLICO_DEV_INFO( Acc_id IN VARCHAR2, Mc_Id IN VARCHAR2,channel IN VARCHAR2,
LOB_VAL IN VARCHAR2, outlet1 IN VARCHAR2, kit_cod IN VARCHAR2,
serial_No IN VARCHAR2, shipperr IN VARCHAR2, estm_recived_date IN date)
IS
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
REC_ID NUMBER;
BEGIN
SELECT REPLICO_DEVICE_INFO_DET#RECID.nextval INTO REC_ID FROM dual;
Replico_device_info_det_Rec.REC#ID := REC_ID;
Replico_device_info_det_Rec.ACCOUNT_ID := Acc_id;
Replico_device_info_det_Rec.MAC_ID := Mc_Id;
Replico_device_info_det_Rec.CHANNEL_LINE_UP := channel;
Replico_device_info_det_Rec.LOB_VALUE := LOB_VAL;
Replico_device_info_det_Rec.OUTLET := outlet1;
Replico_device_info_det_Rec.KIT_CODE := kit_cod;
Replico_device_info_det_Rec.SERIAL_NUMBER := serial_No;
Replico_device_info_det_Rec.SHIPPER := shipperr;
Replico_device_info_det_Rec.ESTIMATED_RECIVED_DATE := estm_recived_date;
INSERT INTO replico_device_info_det
VALUES Replico_device_info_det_Rec;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
END REPLICO_DEV_INFO;
PROCEDURE SUBSCRIBER_INS_SS (
SOURCE_SYS_ID IN VARCHAR2,
TRACKING_ID IN VARCHAR2,
ACCOUNT_NO IN VARCHAR2,
prepaidActDevDetails_tab IN prepaidActDeviceDetails_tabobj,
ERROR_CODE OUT VARCHAR2)
IS
Input_Parameter_Is_Null EXCEPTION;
PRAGMA EXCEPTION_INIT (Input_Parameter_Is_Null, -2000);
prepaidAccountDetails prepaid_act_dvc_details_obj
:= prepaid_act_dvc_details_obj (NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL);
STATUS VARCHAR2 (1) := '1';
cust_no VARCHAR (10);
m_mac_id VARCHAR2 (20);
channel_lineup VARCHAR2 (25);
LOB_VALUE VARCHAR2 (25);
subscriber_master_Rec subscriber_master%ROWTYPE := NULL;
Replico_device_info_det_Rec Replico_device_info_det%ROWTYPE := NULL;
flg NUMBER (1);
plan_code VARCHAR2(10);
subs_aact_no NUMBER(20);
m_plan_code1 payment_transaction_history.TH_PLAN_CODE%type;
m_payment_mode1 payment_transaction_history.TH_PAYMENT_MODE%type;
pm_phone_no_cur subscriber_master.pm_phone_no%type;
pm_status_cur subscriber_master.pm_status%type;
pm_user2_cur subscriber_master.pm_user2%type;
pm_user9_cur subscriber_master.pm_user9%type;
pm_cust_no_cur subscriber_master.pm_cust_no%type;
pm_cust_1 subscriber_master.pm_cust_no%type;
cm_i customer_master.cm_status%type;
CURSOR subs_rec is select pm_cust_no, pm_phone_no, pm_status, pm_user2, pm_user9 from subscriber_master
where pm_cust_no = cust_no and pm_status= 'S';
BEGIN
IF ( Source_Sys_Id IS NULL
OR Tracking_Id IS NULL
OR ACCOUNT_NO IS NULL
OR prepaidActDevDetails_tab.LAST = 0)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
BEGIN
SELECT cm_cust_no
INTO cust_no
FROM customer_master
WHERE cm_cust_id = ACCOUNT_NO AND cm_status IN ('A', 'P', '0');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
ERROR_CODE := 'SI001';
log_error ('SI001',
SQLERRM,
'No Customer exist with Active or Pre Actiavted');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := '0';
END;
BEGIN
FOR i IN prepaidActDevDetails_tab.FIRST ..
(prepaidActDevDetails_tab.LAST)
LOOP
prepaidAccountDetails := prepaidActDevDetails_tab (i);
prepaidAccountDetails.Status_of_device := '1';
IF ( prepaidAccountDetails.Account_id IS NULL
OR prepaidAccountDetails.Mac_Id IS NULL
OR prepaidAccountDetails.LOB_value IS NULL)
THEN
RAISE Input_Parameter_Is_Null;
END IF;
IF (prepaidAccountDetails.LOB_value = 'VIDEO')
THEN
/* Commented as channel lineup is not coming from the input request */
/*IF(prepaidAccountDetails.Channel_Line_Up is NULL) THEN
Error_code :='SI002';
log_error ('SI002', SQLERRM, 'Channel line up is mandatory for Video');
INSERT_WS_LOG(Source_Sys_Id,'F',Tracking_Id,Account_No,prepaidAccountDetails.Mac_Id);
STATUS:=0;
prepaidAccountDetails.Status_of_device:='0';
END IF;*/
SELECT EC_CHANNEL_LINEUP
INTO channel_lineup
FROM ELIGIBLE_CUSTOMER
WHERE EC_CUSTOMER_NO = cust_no;
END IF;
BEGIN
SELECT 1
INTO flg
FROM subscriber_master
WHERE pm_phone_no = prepaidAccountDetails.Mac_Id
AND pm_status IN ('P', '0', 'A', 'B');
EXCEPTION
WHEN NO_DATA_FOUND
THEN
flg := 0;
END;
IF (flg = 1)
THEN
ERROR_CODE := 'SI003';
log_error ('SI003',
SQLERRM,
'Customer Already Exist with given Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END IF;
BEGIN
SELECT md_mac_id
INTO m_mac_id
FROM mac_details
WHERE md_mac_id = prepaidAccountDetails.Mac_Id
AND md_start_date <= SYSDATE
AND md_status = 'A';
EXCEPTION
WHEN OTHERS
THEN
ERROR_CODE := 'SI004';
log_error ('SI004', SQLERRM, 'Invalid Mac Id');
INSERT_WS_LOG (Source_Sys_Id,
'F',
Tracking_Id,
Account_No,
prepaidAccountDetails.Mac_Id);
STATUS := 0;
prepaidAccountDetails.Status_of_device := '0';
END;
select pm_cust_no into pm_cust_1 from subscriber_master where pm_cust_no = cust_no;
IF (STATUS = 1 AND prepaidAccountDetails.Status_of_device = '1')
THEN
SELECT DECODE (prepaidAccountDetails.LOB_value,
'HSD', 'HSD',
'VIDEO', 'VDO')
INTO LOB_VALUE
FROM DUAL;
OPEN subs_rec;
LOOP
FETCH subs_rec into pm_cust_no_cur, pm_phone_no_cur, pm_status_cur, pm_user2_cur, pm_user9_cur;
IF subs_rec%FOUND THEN
IF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = prepaidAccountDetails.outlet and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id
where pm_cust_no = pm_cust_no_cur and pm_user9 = prepaidAccountDetails.outlet;
select cm_status into cm_i from customer_master where cm_cust_no = pm_cust_no_cur;
IF( cm_i = '0')
THEN
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
END IF;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
ELSIF
( pm_cust_1 = pm_cust_no_cur and pm_user2_cur= LOB_VALUE and pm_user9_cur = null and pm_status_cur = 'S')
THEN
update subscriber_master set pm_phone_no = prepaidAccountDetails.Mac_Id, pm_status = 'P', pm_name = prepaidAccountDetails.Mac_Id, pm_user9 = prepaidAccountDetails.outlet
where pm_cust_no = pm_cust_no_cur and pm_user9 = NULL;
update customer_master set cm_status = 'P' where cm_cust_no = pm_cust_no_cur;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
ELSIF subs_rec%NOTFOUND THEN
SELECT PM_SUBS_ACT_NO_SEQ.NEXTVAL
INTO subs_aact_no
FROM DUAL;
subscriber_master_rec.PM_SUBS_ACT_NO := subs_aact_no;
subscriber_master_Rec.pm_phone_no :=
prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.pm_open_date := SYSDATE;
subscriber_master_rec.pm_status := 'P';
subscriber_master_rec.PM_CUST_LVL_YN := 'S';
subscriber_master_rec.PM_EQUP_CODE := LOB_VALUE;
subscriber_master_rec.PM_HOME_AREA := 'HOM';
subscriber_master_rec.PM_USG_CODE := 'USG';
subscriber_master_rec.PM_NO_TYPE := 'S';
subscriber_master_rec.PM_TCG_CODE := 'DEF';
subscriber_master_rec.PM_APLN_DATE := SYSDATE;
subscriber_master_Rec.PM_NAME := prepaidAccountDetails.Mac_Id;
subscriber_master_Rec.PM_STAFF_id := '16';
subscriber_master_rec.PM_USER2 := LOB_VALUE;
subscriber_master_rec.PM_USER3 := channel_lineup;
subscriber_master_rec.pm_cust_no := cust_no;
subscriber_master_rec.PM_USER8 := 'Y';
INSERT INTO subscriber_master
VALUES subscriber_master_rec;
REPLICO_DEV_INFO( prepaidAccountDetails.Account_id, prepaidAccountDetails.Mac_Id,channel_lineup,
prepaidAccountDetails.LOB_value, prepaidAccountDetails.outlet, prepaidAccountDetails.kit_code,
prepaidAccountDetails.serial_Number, prepaidAccountDetails.shipper,prepaidAccountDetails.estimated_recived_date);
END IF;
END LOOP;
CLOSE subs_rec;
SELECT TH_PLAN_CODE,TH_PAYMENT_MODE
INTO m_plan_code1,m_payment_mode1
FROM PAYMENT_TRANSACTION_HISTORY
WHERE TH_CUSTOMER_NO = cust_no
AND TH_LOB = LOB_VALUE
AND TH_SUBSCRIBER_NO IS NULL;
IF(LOB_VALUE = 'HSD') THEN
IF(m_plan_code1 = 'SIKI') THEN
plan_code := 'SIKI';
ELSE
plan_code := 'KIT';
END IF;
ELSE
IF(m_plan_code1 = 'SIKT') THEN
plan_code := 'SIKT';
ELSE
plan_code := 'TV';
END IF;
END IF;
UPDATE PAYMENT_TRANSACTION_HISTORY SET TH_SUBSCRIBER_NO = subs_aact_no, th_writeback_status = 'Y' WHERE TH_CUSTOMER_NO = cust_no AND TH_PLAN_CODE = plan_code;
COMMIT;
END IF;
END LOOP;
END;
END SUBSCRIBER_INS_SS;
END SUBS_INS_API_SS;
--- type object
create or replace
TYPE prepaid_act_dvc_details_obj--prepaidAccountDeviceDetailsObj
AS OBJECT ( Account_id VARCHAR2 ( 25 )
, Mac_Id VARCHAR2 ( 25 )
, Channel_Line_Up VARCHAR2 ( 25 )
, LOB_value VARCHAR2 ( 25 )
, Status_of_device VARCHAR2 ( 25 )
, outlet VARCHAR2(25)
, kit_code VARCHAR2(25)
, serial_Number VARCHAR2(25)
, shipper VARCHAR2(25)
, estimated_recived_date date )
type---
create or replace
TYPE prepaidActDeviceDetails_tabobj as table of prepaid_act_dvc_details_obj
---- i need to run this package via separate procedure. but i don't know how to pass the variable. because the passing argument contain object tab variable. please help me.. give me suggestion or procedure to run this pkg. -
During the material creation ,it is showing some error(bdc program)
hi expects,
during execution the program ,the material is created.but i am getting a message that field rmmg1-mbrsh(industrial sector) that "input value is longer than screen field.please help me solving this problem.REPORT ZMM_RDD0009_MATERIAL_CREATION .
structure declaration.
types : begin of ty_upload,
MAKTX TYPE MAKTX, "Material Description
WERKS TYPE WERKS, "PLANT
MTART TYPE MTART, "Material Type
MATKL TYPE MATKL, "Material Group
MEINS TYPE MEINS, "Base Unit of Measure
MFRPN TYPE MFRPN, "Manufacturing part number
SALK3 TYPE SALK3, "net amounting
PEINH TYPE PEINH, "price unit
VPRSV TYPE VPRSV, "price control indicator
BKLAS TYPE BKLAS, "valuattion class
end of ty_upload.
INTERNAL TABLE DECLARATION.
internal table for upload the data.
data:t_upload type standard table of ty_upload initial size 0,
*internal table for bdcdata.
t_bdcdata type standard table of bdcdata initial size 0 ,
*internal table for bdcmsgcoll.
t_bdcmsgcoll type standard table of bdcmsgcoll initial size 0,
t_error type standard table of ty_upload initial size 0,
WORK-AREA DECLARATION.
work-area for upload the data.
w_upload type ty_upload,
bdcdata type bdcdata,
work-area for bdcmsgcoll.
w_bdcmsg type bdcmsgcoll,
*global variable declaration.
g_message(70) type c.
*include bdcrecx1.
*start-of-selection.
start-of-selection.
call function 'GUI_UPLOAD'
exporting
filename = 'D:/MATERIAL.txt'
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = t_upload.
EXCEPTIONS
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
DEST = FILLER8
group = 'ERROR_MAT'
HOLDDATE = ''
KEEP = 'X'
user = sy-uname
RECORD = FILLER1
prog = sy-cprog.
loop at t_upload into w_upload.
refresh t_bdcdata.
*perform open_group.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MBRSH'
'W_UPLOAD-MBRSH'.
perform bdc_field using 'RMMG1-MTART'
'W_UPLOAD-MTART'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(17)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(04)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(17)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '0080'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-WERKS'
'W_UPLOAD-WERKS'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
'W_UPLOAD-MAKTX'.
perform bdc_field using 'BDC_CURSOR'
'MARA-MATKL'.
perform bdc_field using 'MARA-MEINS'
'W_UPLOAD-MEINS'.
perform bdc_field using 'MARA-MATKL'
'W_UPLOAD-MATKL'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
'W_UPLOAD-MAKTX'.
perform bdc_field using 'MARA-MEINS'
'W_UPLOAD-MEINS'.
perform bdc_field using 'MARA-MATKL'
'W_UPLOAD-MATKL'.
perform bdc_field using 'BDC_CURSOR'
'MARA-MFRPN'.
perform bdc_field using 'MARA-MFRPN'
'W_UPLOAD-MFRPN'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
'W_UPLOAD-MAKTX'.
perform bdc_field using 'MARA-MEINS'
'W_UPLOAD-MEINS'.
perform bdc_field using 'BDC_CURSOR'
'MBEW-VERPR'.
perform bdc_field using 'MBEW-BKLAS'
'W_UPLOAD-BKLAS'.
perform bdc_field using 'MBEW-VPRSV'
'W_UPLOAD-VPRSV'.
perform bdc_field using 'MBEW-PEINH'
'1'.
perform bdc_field using 'MBEW-VERPR'
'W_UPLOAD-VERPR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
*perform bdc_transaction using 'MM01'.
*perform close_group.
call transaction 'MM01' using t_bdcdata mode 'N' update 'S'
messages into t_bdcmsgcoll.
if sy-subrc <> 0.
*append w_upload to t_error.
call function 'BDC_INSERT'
exporting
tcode = 'MM01'
tables
dynprotab = t_bdcdata.
endif.
clear w_bdcmsg.
read table t_bdcmsgcoll into w_bdcmsg index 1.
call function 'FORMAT_MESSAGE'
exporting
id = w_bdcmsg-msgid
lang = sy-langu
no = w_bdcmsg-msgnr
v1 = w_bdcmsg-msgv1
v2 = w_bdcmsg-msgv2
v3 = w_bdcmsg-msgv3
v4 = w_bdcmsg-msgv4
importing
msg = g_message
exceptions
not_found = 1
others = 2.
if sy-subrc = 0.
write:/ w_upload-maktx,'----', g_message.
refresh t_bdcmsgcoll.
endif.
endloop.
call function 'BDC_CLOSE_GROUP'.
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata to t_bdcdata.
clear bdcdata.
endform.
Insert field *
form bdc_field using fnam fval.
IF FVAL <> NODATA.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata to t_bdcdata.
clear bdcdata.
ENDIF.
endform.
FLAT FILE
MAT.DESCRIPTION PLANT MAT.TYPE MAT.GROUP UNIT
M 1000 ROH 001 KG
MANU.PART NET PRICE PRICE VALUATION
NUMBER AMOUNTING UNIT CONTROL CLASS
1 25 1 V 3000 -
Install companion CD, got some errors
Hello,
I just installed companion CD. my pc os is[b] windows xp 2002
In the step of Availabe Product Components
Oracle Database 10g Companion Products
There are two components:
1. Apache Standalone
2. HTML DB
I chose both to install, and the installtion was sucessful.
Now when I type http://myIP:7777/, it shows oracle http server interface.
When I go to OUI, I found there is porduct called : HTML DB 10.1.0.2.0. Is this HTML DB2.0 ? I don't think so.
I need to install html db 2.0, so I[b] disinstall the html db from OUI and follow the following link to remove html db component,
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm
now I type http://myIP:7777/, it shows "can not find server". How to start oracle http server?
Should I disinstall companion CD? install it again?
Thanks for your help!!
EmilyHi,
HTML DB2.0 is only available as standalone product on the database download page (not part of companion software). Installation guide and readme-files should tell, how to combine HTMLDB with the HTTP server (apache). I'm not sure, if apache is part of the 2.0 software.
Werner -
After backing up, iTune was restoring and it showed the error message "An error occurred while restoring this iPhone (-50)".
I have two iPhones; iPhone 4 and iPhone 3GS.
I successfully upgraded my iPhone4 to iOS 5 with iTune on my Window XP. Everything works well.
So, I tried to upgrade my iPhone 3GS as well (with the same iTune on the same computer). After backing up,
iTune was restoring and it showed the error message "An error occurred while restoring this iPhone (-50)".
I tried to unplug and plug the iPhone. but iTune showed the same error when I click "contrinue restore" button.
I think backup file would still exist on my computer and I want to restore them all.
Please help me to fix the problem.
Thanks,Hi...
Click here > iTunes: Advanced iTunes Store troubleshooting
Then click: Specific Conditions and Alert Messagers
Then click: Error 50 ... -
[CS4] my Script got some error!
Hi Scripter,
I found that "paragraphStyles[i].composer" can not run in CS4, this is properties belong to "paragraphStyle", how can i change my script to lead them run balanced?
In my old version, Use this properties as follow:
for (var i=0; i<myParaStyleLength; i++) {
if (i==0) {
else {
myActiveDoc.paragraphStyles[i].composer = "Composer one line";
"the object not support method or properties"
and the myActiveDoc.ParagraphStyle.kerningMethod also can not use.var singleLineComposer = app.translateKeyString("$ID/HL Single");
myActiveDoc.paragraphStyles[i].composer = singleLineComposer;
Hi Herbs,
Thank you very much!! i think it's ok now! but when my Script need to "appliedLanguage=Chinese : Simplified" if i can script it like this?
var chineseLan=app.translateKeyString("$ID/Chinese:Simplified");
myActiveDoc.paragraphStyles[i].appliedLanguage=chineseLan;
Regards,
Robin -
Firefox is not recognizing that I have logged into a web page with user name and password. It is stuck on the log in page. Where do I change the Firefox settings so it recognizes the log in and password and lets me into the site? I have had this user name and password for several months so I know it works.
It may be that you have cookies disabled, do any of the sites tell you that you need to enable cookies? Check if cookies are enabled: [[Enabling and disabling cookies]]
-
How to get messages in to iPhone and iPad too
You have to log into iMessage on your iPhone and iPad. So that means on your iPhone, go to settings, messages, send and receive, then click "Use your Apple ID for iMessage." log into your Apple ID. Then do the same thing with your iPad. So then it should work fine again. Just make sure there is no other device logged into iMessage with your Apple ID, just your iPad and iPhone
-
I got your suggesuions but i don't understand what to copy and where ti paste
when i start firefox it opens with inbox search engine but i wants with google
I feel bad for you.
But without more specific information (e.g., a copy of the pasted link) there is nothing I or anyone can do to help you get to a web site. All we can offer is commiseration. -
so after purchasing, i was unable to download it to my computer so i tried it on my wifes computer, it worked on hers, but i cant get my purchased programs on it, only the trial versions. so im stuck. I have LR4.2 on my computer but it wont view my .NEF files from my Nikon D610. so now im really irritated that i cant use anything that i have purchased from Adobe.
Egman702 please utilize the steps listed in Sign in, activation, or connection errors | CS5.5 and later to resolve the connection error preventing your membership from being authorized.
-
Sfc/scannow found some errors but couldnt solve some of them
hi im running windows 8 64 bit and I found that there are 2 corrupted files can someone help me please and tell me how to fix them :
C:\windows\SysWOW64\pt-PT"\[l:46{23}]"windows.ui.xaml.dll.mui" from store
C:\windows\SysWOW64\fr-FR"\[l:46{23}]"windows.ui.xaml.dll.mui" from storeHello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
Maybe you are looking for
-
Error in Sales upload using BAPI
Dear Friends I am facing the problem in the sales upload program. it gives the return type is 'E' message is "Sales document was not change" Help me to solve this problem. Thanks in advance. The program is REPORT zsalupd2. DATA: header LIKE bapisdhd
-
A couple of days ago I purchased an open macbook air item. The only issue I am having is that who ever previously owned the computer must have deleted iphoto on the macbook air because it is no where to be found. Is this something Best Buy can fix o
-
Oracle Ias 9i and Apache - How connected?
Hi everybody, here is my problem: i need to know how Oracle Ias 9i communicates with the Apache integrated in itself. I have to understand if i can redirect the requests to the Ias 9i through another Apache instance than the integrated one. This othe
-
Need to change db details for an existing OIM env.
Hi, We are doing a POC where we have two non prod env. One is TST env. and other one is QA env. I have one question here. Can we point TST IDM to QA db? Means we need to use application of one env. and DB of another env. If anybody have done this typ
-
Okay I'm tearing my hair out here! I'm working on a Web design for a class. I'm trying to make a fixed header that is centered on the screen. The block containing the header is 950 pixels wide and should auto-center. Here's a link: http://pjutter.c