Dvd burned from final cut pro hackes when viewed on Bose dvdplayer

When I burn a DVD from final cut pro x (disc creator) on my MAC book pro,(MAC IOS lion 10.7.5) it can be viewed on my computer without problems, but hackes when viewede on my Bose dvd player, even though it works fine with purchased dvds. What is the problem?

Brand of DVD media can cause this.  Not all DVD players will work with all self-burned DVDs.  They are flimsy soft plastic and prone to errors.  This is not an FCPX issue, but simply a self-burned DVD issue.  Try a different brand of DVD media.

Similar Messages

  • Hi I just updated from Snow Leopard to Mountain Lion. I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk. My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standar

    Hi I just updated from Snow Leopard to Mountain Lion.
    I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
    My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
    Can I fix this problem?

    Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
    I followed the instructions and removed from /System/Library/Extensions/ the following files:
    IOFireWireSerialBusProtocolTransport.kext
    IOFireWireAVC.kext
    IOFireWireFamily.kext
    IOFireWireIP.kext
    IOFireWireSBP2.kext
    I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
    The System Profiler says "No FireWire ports were found."
    So this tells me that the FW port is probably the culprit and is messing up the installation.
    So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

  • I can't burn a normal dvd from final cut pro.Help would be much appreciated!

    Hi.I am having great difficulty burning my final cut pro project to dvd.It is shot in HD and I have compressed it but when I burn a dvd it will not play in a normal/standalone dvd player.Could someone please tell me how to burn my project to dvd.Can HD film be burned to a normal dvd?The final cut pro file is only 1.3 GB.Any help/advice is much appreciated.Thank you.

    >Could you please tell me what the best settings to use when compressing to quicktime or if infact it has to be done at all?
    Matt has already told you twice; his first response (above) gave you step-by-step instruction.
    I'll spell it out for you again but with slightly more detail:
    1. In FCP, render the Sequence fully, then go to File->Export->QuickTime Movie.  (do NOT use "Using QuickTime Conversion).  In the export window, do NOT Recompress All Frames.  You can chose to make the movie self-contained or not.
    2. Use the resulting file in Compressor, where you will chose a DVD preset appropriate for your video's duration.  If needed, you can duplicate then modify any preset to better suit your needs.  Compressor will create two files; an MPEG-2 video file (.m2v) and a Dolby Digital audio file (.ac3).
    3.  Use the two files created by Compressor in DVD Studio Pro to author and burn a DVD.  Do NOT author an HD DVD as these will not play in DVD players.
    -DH

  • Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

  • When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

    There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
    Does it play in your Mac?
    What brand of disks are you using?
    Russ

  • Burning a video from Final Cut Pro using iDVD

    When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
    iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

    The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
    o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
    o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
    The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
    Piero

  • When sending job from Final Cut Pro to Compressor using local QCluster

    When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
    If I use 'This Computer' it works fine.
    What gives?
    Fresh install of OS and FCS.
    Thanks!

    I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

  • What compression to use when Exporting HD video from final cut pro PAL setting

    Hi there
    I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
    Any advice greatly appreciated!
    thanks

    Just to add two suggestions.
    1) Consider putting your four movies on two disks.
    2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
    Russ

  • "media server application expectly quit" when submitting from final cut pro

    browsing through the list, it seems the problem couldn´t be solved so far.
    doing some systematic testing, the following riddle shows up:
    ... when adding a QT ref movie (or movie) directly to the compressor batch list and submit to the cluster, everything runs fine.
    ... when exporting from final cut pro:
    menu -> export -> using compressor ...
    submitting in compressor using:
    1) Cluster: this computer: everything keeps running fine.
    2) Cluster: MylovelyCluster ....
    the job fails with the message "Failed: HOST [clusternode_name.local] media server application unexpectedly quit"
    since there is 5TB + of data to be compressed, copying files to the render nodes is not an option. all data is on a shared xraid, connected via giganet.
    Any ideas, any hints appreciated !
    regards,
    p.s. Anybody running an XSAN having the same issues?
    G5s, G4s, G3s, macminis, powerbooks   Mac OS X (10.4.7)   xraid

    ... well, the answer is in other topics.
    showstopper explains it patently again and again ...
    thanks from here.
    shortly: when submitting from FCP, every node HAS to have FCP installed and MUST have access to the same relative file path (mounted shared volume). If the volume is not present, the render node will open the reconnect media dialogue and waits for user input.

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

  • TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

    when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
    i need to submit this movie for uni project tomorrow.
    any help/advice will help . thanks.

    According to Crash Analyzer
    -50 (QuickTime)
    This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
    good luck

  • I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

    I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

    I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

  • Can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter

    can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???

    Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
    Russ

  • TS4162 "invalid Account Name or Password" when I try to share to YouTube from Final Cut Pro

    Hello,
    I keep getting "invalid Account Name or Password” when I try to share to YouTube from Final Cut Pro. I am signing in to my YouTube account from Safari and my password is working. In Final Cut Pro, I go to: Final Cut Pro > Preferences > Destinations > Add Destination > Double click YouTube. I create new sharing destination and the issue still not gone. Kindly please find me a solution.
    Thank you for your kind attention.

    Make sure you're using your email associated with your YouTube account in FCPX and not your YouTube Username as that's no longer allowed by Google.

  • Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

    I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

    First: How are you exporting? Are you using the Share feature or  Send to Compressor?
    Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
    Russ

Maybe you are looking for

  • Surface Pro 3 Student Discount

    Hello, I am interested in purchasing a Surface Pro 3 and receiving the advertised $150 discount. I will be attending the University of Nevada, Reno this fall.  Unfortunately they have quit issuing student email addresses (http://www.unr.edu/it/commun

  • Photoshop Elements 12 for Windows 7 PC.  Activation Issue

    I have Photoshop Elements 12. I deactivated from my wife's MAC and want to install on my Windows 7 PC. Adobe says I have already used my redemption code to get the serial number. I can't seem to find the serial number to activate the new installation

  • Specify multiple error messages in a Method Validator

    Is there a way I can specify multiple error messages in a Method validator?

  • Captured footage not accessable in FCPro but is in Quicktime

    This has happened twice now so I know its not just a fluke. A captured video was unplayable - unaccessible even - inside of FCPro 7. It acts like its 1 frame long rather than 27 minutes. But when I checked the file in scratch disk / captured / proj a

  • Latest version of itunes and syncing music

    Ever since IOS 7, and now IOS 8 has arrived my itunes library will not sync onto my iphone 5s. I have tried all the so called "Fixes", NONE OF THEM WORK!!!!!. I have spent hours and hours with this problem,and tried all the so called remedies, this i