DVD Drive not detected after Vista reinstall/recover

Hi,
I was having various problems with my computer (dv6815nr) so I did a complete recovery using the recovery image
on the hard drive. Everything seems to work now except the dvd drive is not working. it is not detected in device manager.
I have tried all the fixes and "mr. fix its" that i could find on the ms knowledge forum. i have also checked the registry for the upper/lower filters as described on the ms website and also in this forum. i have also removed, rebooted, shutoff and then reinstalled the drive with no results. any help would be greatly appreciated.
gocd1

yes, the drive was working immediately before the recovery. I noticed that the drive was not working when i went to install the windows ultimate upgrade disc. drive lights up, spins disc and then nothing. Also, i have physically removed the drive from the computer, shut off computer removed power supply (cord and battery) held down power button for 30 seconds restart computer with drive not in computer and then shutoff again and physically reinstall drive. Also have done uninstall of all IDE/ATA controllers channels in device manager and then restart as recommended on another post. looked on another hp6700 and found "cd/dvd" on device manager list and mine does not have that. so not sure why dvd drive would be in ide/ata channel list.
gocd1

Similar Messages

Cd dvd drive not detecting to cd or dvd.

cd dvd drive not detecting to cd or dvd. properties of same shows ok by device maneger. rotation of disck could not observed.

Hi Virendrasingh,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and CD/DVD not working correctly. I would perform a hardware test. Where did the CD come from? Were you having issues with the CD ROM before? I would be happy to assist if needed as there are many models of HP Notebook, I would need the model number. How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Please Help me..... DVD drive not detected, Vista home basic 32 bit

Hi,
I have a compaq presario v3702au laptop with Vista basic 32 bit OS.
The dvd drive has suddenly vanished and is not detect by device manager. It show up in the BIOS and brifly powers up while booting(tray comes out on pressing the button) , but does not recieve power once booted( tray does not come out on pressing the button).
there are no upper and lower filters present so this remedy is not for me, ms fixit tool also could not help as it could not find any optical drive.
The hardware itself seems to be alright because if I press F8 to get to boot options ( Safe mode, etc) and insert a disc , the drive tries read it (ie. Drive receives power, tray opens and the disc also spins), but once the boot starts the dvd button becomes non functional as if it is not receiving power.
I really need my optical drive and would greatly appreciate any help on this .
Thanks in advance,
Sankr

So does it fully boot from the optical drive? All the other symptoms you describe are fully consistent with a dead drive, but if you can boot to a bootable disk then the drive is OK

Hp g6000 dvd drive not detected in my computer, tried registry fix and still not working.

Hi i have a hp g6093ea laptop and for a couple of weeks now i have had my dvd drive dissapear from my computer.
i have the tried the registry thing where you delete the upper and lower filters and then restart laptop.
it worked then couple days later it was gone again.
i have removed the dvd from laptop and clean the connection and put it back still the same.
i was told to remove any burning programs and reinstall so i did that and the drive came back then after reboot went again.
the dvd drive ejects and has power and attempts to read the disk but its just not detected in my computer.
i have even been into the bios and put cd drive as boot first.,
then put my bootable xp pro disk in and it wont boot from the bios.
so i thought i would try an external drive to boot from bios, and it doesnt boot from there either.
i have had the drive randomly pop up in my computer and then after a restart it would be gone again.
so i cant put a fresh install on my laptop and i dont know what else i can do.
any help
thanks

How old is your laptop?
Have you had any other problems, besides the dvd drive, in the past few months?

Hard Drive Not detected after replacing DC In Board

So after more than a year of jiggling an easliy bent AC adapter in the port to get my ibook G4 to charge it just quit and would not charge. I suspected it was the slightly loose DC in port (having no idea what was behind the little hole) so I took it to the Genius Bar at my local Apple Store where they confirmed it was likely the DC in board. I was told that just sending my little old ibook away to get fixed would cause an exorbitant $330 just to ship it out, never mind any parts, etc. It was suggested I just buy a new macbook and be done with it. But we've been through a lot and I didn't want to just toss her away so I found a DC In board and replaced it myself. Parts and directions courtesy of ifixit.com
So the part is working well enough that it detects the new AC Adapter (this one new and unbent), which is great. Now I have a slightly larger problem and that is the dreaded little finder/? flashing icon that comes up when I start the computer. It won't start in safe mode. I can't find the original disks (Panther OSX) that came with it. I popped in my Tiger Install Disk and that (Thankfully) came up so I was able to open Disk Utility and lo and behold no hard drive was detected. Just the optical drive and the Tiger DVD.
I was so careful! Did I poke the Hard Drive or something? Is she mad at me for opening her? If anyone has any advice on how I can repair this myself please let me know. I'm desparate to have my baby back.
Message was edited by: alemicia

It's possible that something was disrupted during the repair. You might go back to the ifixit site and look at the instructions for replacing the hard drive. You want to try and see if somehow you disconnected it or something like that. There's a good chance that it is something simple that you can fix. Looking at the pictures might trigger a memory of maybe something taken loose and not reconnected. And try to find your original discs--you will need them.
Good luck!

DVD drive not detected anymore

Hi,
four weeks ago or so, I suddenly started to miss my DVD drive in my mount- and even in my /dev folder. From some point of time on (most likely some kernel patch), it just wasn't detected anymore.
Technically it still works, I can still boot from boot CDs, it's appearantly just a kernel detection thing.
I have this mainboard: http://www.asrock.com/mb/overview.asp?Model=P4VM890 with my harddisk hanging on IDE0 and my DVD drive and CD writer on IDE1.
The output of dmesg doesn't mention anything else then the successful detection of sda0-5.
Things I tried already are:
-Pata hook only, IDE hook only, both, including kernel update.
-Putting ide_disk, cdrm, piix into the MODULES section.
-All combinations of master/slave settings for my HDD and other drives on poth IDE ports.
-All related BIOS-settings
-CK-Kernel, Beyond, etc.
Now in this Thread coolpyrofreak suggested to reinstall Arch with IDE-legacy enabled.. which I guess I have to try at some point, but I don't relly want to install another distribution or windows just be able to burn another arch cd.. and even though it's probably not too much of a hassle to reinstall arch and just keep my old home folder, I thought I'd give it one last try here. I still hope the ide-legacy-option can be activated afterwards. Does anyone know how? Or does anyone have any other idea what I should do?
Thanks in advance.
Last edited by Zoranthus (2007-05-14 11:01:38)

Iirc ide-legacy has the same result as using ide instead of pata in mkinitcpio.
I've encountered the same problem in my desktop : DVD writer disappeared twice , but came back a few updates later
currently it has disappeared again ...
Using ide or pata doesn't make a difference, i'm inclined towards a kernel/udev/hal related combination problem.
Last edited by Lone_Wolf (2007-05-14 19:51:45)

A105-S4384 DVD drive not recognized after replacement.

I've seen the posts about deleting the filters from the registry on upgrade to Vista. That doesn't help my case.
I replaced the stock Mat**bleep**a drive when it stopped reading any type of disc. The replacement is a Toshiba TS-L632, which was sold as a compatible drive.
What I see is that in the BIOS, the drive is not recognized as Optical Drive, but on the Boot tab, the drive DOES show up as a boot option "TSST-L632H-..."
I do not see a CD/DVD drive option at all in the Windows Hardware Manager (ie. it isn't a matter of seeing an exclamation mark over the drive... it isn't there at all).
If I insert a disc, I hear the drive rev up and spin, but nada afterwards. There is no light active on the drive. Trying to install the L632's firmware is no good, as the installer just pops up a dialogue with "Drive not found!!" message.
I'm at wit's end. The Toshiba site isn't helpful in confirming the compatibility of the drive, but you'd hope that if they make laptops and laptop drives, they'd be compatible.

Although the drive shows up in the boot menu, can you actually boot from it?
Some Toshiba laptops needed the drives to be in CS (cable select) mode in order for them to function properly with the laptop. This can be done on an after-market drive by shorting two pins on the connector (and I have done it before, so it does work), but that may or may not be the problem. But the computer I had to do it to was quite a bit older than yours (M10-something).

DVD drive not detected (K9N2GM-FD)

For some reason my motherboard( K9N2GM-FD) is not detecting my DVD drive.
Here is the setup I'm using:
AMD Athlon 64 X2 5200 Brisbane 2.7GHz
Kingston 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory
MSI K9N2GM-FD AM2+/AM2 NVIDIA GeForce 8200 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM 16MB Cache SATA 3.0Gb/s Hard Drive
a lite on DVD drive(model DH-20A4P33C) I bought at walmart
Antec NeoPower 550 550W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
The DVD drive is an IDE drive and it's getting power(I can open and close it).
I tried changing some things in the bios, trying a different drive, and trying a different IDE cable still can't get it to work.
every thing passes post test.
And the bios is version 1.2.
Any help would be greatly appreciated.

You did use proper standoff's to mount the board in the case?
yes
BTW, the controller is turned on I presume.
yes
If all is mounted correctly and there isn't any short, then I would RMA the board.
Ok I'll RMA it
Thanks for the help

DVD drive not recognized after Security update

Hello -
Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
Darth

USB Flash Drive not detected after OS X Mountain Lion installed.

My MacBook Air 11 inch (Mid 2011) suddenly stopped detecting all my USB flash drives a week after upgraded to Mountain Lion.
I have a tiny 16GB USB flash drive (Sandisk Cruzer Fit), for daily work, that has never been unplugged from my MBA.
Everything was fine on Lion, and a week of Mountain Lion, until just when my MBA prompted me that my flash drive "was not ejected properly" after I re-opened the display/lid, or from sleep mode.
I thought I might have accidentally removed the flash drive unknowingly. So I tried re-plugging the flash drive, closed and re-opened the MBA lid, and the same error message "The disk was not ejected properly" occured. I repeated the steps for a few times (thinking my flash drive might be faulty) and at my last attempt, the flash drive was stopped detected. I tried several USB flash drives and external hard drives (of various brands) to both the USB ports of my MBA, only the external hard drives were detected (on both USB ports) and functioning. None of the flash drives was detected on either USB port.
The tested flash drives were plugged to another 13" MacBook (Unibody, Late 2008, OS X Lion) and they all worked fine.
I wonder if anyone faces the same problem, and solution(s) please?
Additional: OS X Mountain Lion re-installed and same problem occurs / No problem with OS X Lion.

I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
Hope this helps.

Windows 7 ultimate install on Hp Media center pc m7170n now cd/dvd drives not detected

My computer crashed so I went ahead and had windows 7 installed. Now my cd/dvd drives are not being detected. Any solutions out there?
Anthony

Ascottbag, welcome to the forum.
Here is a guide that may help you solve your problem. Please let us know if it helps or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

DVD drive not recognised after initial install of software and drivers - Server 2012 R2

Hi
I have a SATA DVDRW drive that isnt being recognised by windows server
It is recognised in bios, and was initially recognised by windows, until installing an AV on the server.
Looking under device manager, it can still be seen, but only as a hidden device (greyed out).
Both the C: drive and the DVD drive are set in IDE mode in the bios (believe that is just meaning they are sandalone, rather than RAID mode)
If the DVD drive is moved to another SATA port it is recognised by windows, however I want to keep these ports free, so i can use them to RAID my other HDDs as and when i get round to buying them.
System specs:
OS - Windows Server 2012 R2 with updates (Microsoft Dreamspark)
MB - ASUS M5A78L/M - USB3
RAM - 1x 4GB DDR3
DVD drive - SAMSUNG superwritemaster SH223L
Any help would be good :)
soz if this is in the wrong forum, just point me to the right one
Thanks
J
Hi guys - thanks for the responses.....
we just tried something simple - swapping the OS drive and the DVD drive over (DVD was in sata 5, OS in sata 6 - now the other way round)
This seems to have worked, so we are going to keep it that way round
Seems Silly yet simple
Thanks again

hi, so you say that the drive will work in another SATA port is there the potential that the SATA port you are currently using has a fault? does it work with any other hardware?
another option is a classic windows fault regarding the corrupt registry filters that would make a CD\DVD drive disappear in explorer, however i am not sure if this problem afflicts sever 2012. you could give it a go to see if it resolves the issue
Press the Windows logo key + R to open the Run dialog box.
Type regedit in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type
the password, or click Allow
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters
registry entry. To do this, go to step 7.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, go to the next resolution.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer.

DVD Drive not detected after Vista reinstall/recover

Similar Messages

Maybe you are looking for