DVD Event Manager = question

Hello,
I have following question regarding the - DVD Event Manager
(DVD Event
Manager.dcr). Basiclly all tutorials I have seen, are
refering to use - DVD
Event Manager - with Shockwave. I would like to use the - DVD
Event
Manager.dcr - inside a projector.exe, which I would like to
distribute on
DVD together with DVD movie itself. Follwoing question
regarding:
Does the enduser have to install shockwave, when the project
is delivered as
projector.exe?
Thank you in advance,
Walter

> Does the enduser have to install shockwave, when the
project is delivered as
> projector.exe?
No.

Similar Messages

DVD Event Manager

Has anyone experienced this problem when adding DVD content
using DVD Event Manager?
1.Open DVD Event Managae Xtra
2.After Adding DVD content and moving on to Event Trigger
Panel - Add New Event panel does not display correctly.
3.Cannot enter any Event Triggers, DVD Event Manager window
freezes.
I'm Using:
Product Version : Director MX2004 Ver10.1
Operating System : Windows XP
OS version : 2002 SP2

I see the same thing happen to me. Had to get by without it.

DVD Event Manager crashing

After installing the DVD Event Manager in the extras
directory I tried to run it. New file open and DVD in the drive. I
get the following message "A fatal error has occurred. Director
will quit now". After pressing OK I get the following message
"Warning! Director is completely out of memory and must exit
immediately". I have the latest updates and my machine is running
2Gb RAM. A Pentium D processor 3.4 Mhz is installed with an ATI
radeon Sapphire 1650 Pro graphics card. Although not state of the
art, I feel it to be a powerful enough machine to cope with
Director. I have tried reinstalling the file with no success. I
note the date of the file is Jan 2004 and have not managed to
locate a later version. What is going wrong?

> Does the enduser have to install shockwave, when the
project is delivered as
> projector.exe?
No.

Event Manager question. Monitoring DNS entry.

Hello everybody,
I want to use Cisco Embedded Event Manager in a router for monitoring a DNS entry that normally resolves 1.1.1.1 but if it changes to 2.2.2.2 the router has to change some access list automatically in order to permit different routes.
I know how to configure de "action" sentences for change the ACLs but I dont know how to configure a track or a SLA in order to check the DNS entry and react if it changes.
Someone knows how to do that?
event manager applet ChangeRoutesWhenDNSEntryChanges
event track 21 state ??????????????????????????????????????????????????<----------
action 1.0 cli command "enable"
action 2.0 cli command "configure terminal"
action 3.0 cli command "ip access...
Thank you in advance!!
Marcos.

Indeed, I just provided the above example to demonstrate how we can force a DNS lookup and parse the IP address...
I was actually thinking about using the IP SLA DNS probe, but I could not find a way to get the IP address from the results... It just shows the response time.
In order to make the script work, we would most likely need to use some timer to trigger it periodically.
This is an adaptation of my previous example to actually accomplish a periodic check:
event manager applet CHECK-DNS
event timer watchdog time 60
action 1.0 cli command "ena"
action 1.1 cli command "ping host1 repeat 1 timeout 0"
action 2.0 regexp "ICMP Echos to (.*), timeout is 0 seconds:" "$_cli_result" _match _ip
action 3.0 if $_ip ne 1.1.1.1
action 4.0 syslog msg "host1 is now $_ip"
action 5.0 end
If you want to do something as a reaction to detecting the change, that would have to go into the "4.0" block (you can use 4.1, 4.2 etc)
Another thing to consider is that this script would run every minute, so as long as the DNS query resolves to anything but 1.1.1.1 we would re-apply the config changes, which is not that good...
A way to solve this can be seen in the next example:
event manager applet HOST1-NOT-1.1.1.1
event timer watchdog time 60
action 1.0 cli command "ena"
action 1.1 cli command "ping host1 repeat 1 timeout 0"
action 2.0 regexp "ICMP Echos to (.*), timeout is 0 seconds:" "$_cli_result" _match _ip
action 2.1 track read 100
action 3.0 if $_ip eq 1.1.1.1
action 4.0 if $_track_state eq down
action 4.1   track set 100 state up
action 4.2   syslog msg "host1 is now 1.1.1.1 again"
action 4.9 end
action 5.0 else
action 6.1 if $_track_state eq up
action 6.2   track set 100 state down
action 6.3   syslog msg "host1 is not 1.1.1.1, new ip is $_ip"
action 6.9 end
action 7.0 end
Basically we are using a stub tracking object to maintain state. Track object 100 would be up if we know host1=1.1.1.1, but if we detect it is something else we change it to down. Only after we detect that host1=1.1.1.1 again we change the track object back to up, which would enabled detecting another change...
Any actions you want to take should go into section "6" and any clean up (when host1=1.1.1.1 again) has to go into section "4".
It is possible to make this detect any change and not just have a static 1.1.1.1 value by assigning the newly detected value to a variable and basically look for a change... Not sure what is your requirement.
The output below shows how this works...
Router#show run | inc ip host
ip host host1 1.1.1.1
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip hos
Router(config)#ip host host1 2.2.2.2
Router(config)#^Z
Router#
*Nov 9 18:23:18.009: %TRACKING-5-STATE: 100 stub   Up->Down
*Nov 9 18:23:18.021: %HA_EM-6-LOG: HOST1-NOT-1.1.1.1: host1 is not 1.1.1.1, new ip is 2.2.2.2
Router#
*Nov 9 18:23:18.065: %SYS-5-CONFIG_I: Configured from console by console
Router#
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip host host1 1.1.1.1
Router(config)#^Z
Router#
*Nov 9 18:23:42.805: %SYS-5-CONFIG_I: Configured from console by console
Router#
*Nov 9 18:24:18.025: %TRACKING-5-STATE: 100 stub   Down->Up
Router#
*Nov 9 18:24:18.033: %HA_EM-6-LOG: HOST1-NOT-1.1.1.1: host1 is now 1.1.1.1 again

Training nd Event Management Question

I have an event scheduled in the past period in T&E Management.
I am still able to book attandees to this event .. I think this is not right.
However, I would like to know if there is any follow up action I need to do on this event so that the event does not accept booking or cancelling any attendees.
Appreciate input on this and I would promptly award points.

Hi,
i have no system access at the moment but in my opinion you have to " firmly book" the event.
Try the context menu on an event.
Please have also a look at:
http://help.sap.com/saphelp_erp2005/helpdata/en/42/51c7944a1211d182b80000e829fbfe/frameset.htm
Regards
Bernd

Training and event management questions

Hi all,
as I am new to this topic I am facing some problems and did not found a solution yet. I hope that someone here can help me. Below the issues.
1. How can I change the Info message which notifies you that the maximum capacity of the attendees have been reached therefore you will proceed to waiting list into a Warning message ?
2. Is it possible to customize the Move up procedure for cancellation in such a way that one would be able to select not only people from the waiting list, but also people from the prebooking list?
3. Even though the factory calendar is selected the training still counts weekend days as training days, does anyone have a clue how can i fix this?
Thank you all in advance for your time.
br,
Ovidiu
Edited by: Ovidiu Moldovan on Apr 20, 2010 2:55 PM

Hi,
thanks this one is ok, the one which I can not find is the info message for when the maximum capacity of the attendee list is reached:
'Optimum capacity reached, only essential or wait list bookings possible' This one I want to change into a warning message.
br,
Ovidiu
And I have a new question as well
In the Attendee List layout is it possible to add columns which are not in the column set from customizing e.g. Personnel subarea,
Employee subgroup, Employee group etc?
Thanks
br,
Ovidiu
Edited by: Ovidiu Moldovan on Apr 20, 2010 3:51 PM

Few questions regarding Training and event management

Dear All,
Can you please help me with the following queries regarding Training and Event Management:
1. How to freeze a completed business event so that no changes to its record (like delete/update attendee details or event detail) is possible?
2. How to get feedback from attendee/faculty with a predefined format with rating (1-4 scale)
3. How to maintain department and category wise training man/hrs or training man/days?
Any help will be appreciated.
Regards,
Toa

Hi Toa,
1. Run report RHHISTO0 via SA38. Once the business event is flagged as "historical" no further changes can be done.
3. SM30 - T77S0 - Make the following swtiches active:
SEMIN AINST
SEMIN APART
Then when events are followed up, these training data is recorded to employee 2002 infotype. You can report on it via PT90 (for department-based selection use "Further selections")
Regards,
Dilek

PMS and Training and Event Management

Hi Gurus,
Our one the of the client implementing PMS and Training and Event Management.
Could anyone suggest me what are the questions need to be asked in initial meeting with the client.
and if anyone has configuration documents on PMS and Training and Event management please forward to me,
my id would be [email protected]
Regards,
Rajesh Soma

The prerequisites of PMS is OM and PA is mandatory,
PMS is just like an interaction between the manager and the employees in an enterprise, based
On his work they are going to put some rating etc.
In the standard system employee called as “Appraise” Manager called as an “Appraiser” and Manager’s Manager called as Higher level manager “Part Appraiser “ can be a self-peer & customer they can save & provide their Comments to the “Appraiser”
First you take the requirement form client side what are the process and how Appraisal system in client then you have to prepare one sheet like Preparation ,Planning,Process
for business functions and other check below :-
HCM, Performance Management (Flexible) 01 - SAP Documentation
HCM, Performance Management (Predefined) 03 - SAP Documentation
check below once :-
Tcodes for PMS Basic Setting
OOHAP_BASIC      Basic Appraisal Template Settings
OOHAP_CATEGORY      Appraisal Category Settings
OOHAP_CAT_GROUP Category Group Settings
OOHAP_SETTINGS_PA PA: Settings
OOHAP_VALUE_TYPE Standard Value Lists
T codes for PMS Process
PHAP_ADMIN     Administrator - Appraisal Document
PHAP_CATALOG     Appraisal Template Catalog
PHAP_CHANGE     Change Appraisal Document
PHAP_CREATE     Create Appraisal
PHAP_PREPARE     Prepare Appraisal Documents
PHAP_SEARCH     Evaluate Appraisal Document
start your work with above things any other post here again ......

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Training Need - TN in Training and Event Management

Hi
Did any one worked on Training Need (TN) in Training and event management? I have the below question.
For France there is a legal requirement to capture some 1.6 % of the employee annual gross salary towards training cost. So where to record the training cost of the employee in Training and event management and is there any link with payroll.
Logically it sounds as it does. but where and how is it connected with payroll.
Please revert if you know the solution.
Brs
Kenu.

Hi
In Table V_T77TNM_DC
We need to have the below entries
TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
Regards
Kenu

Training and Event Management Costs

Hi All,
I have been asked to implement training and event management for purpose of cost tracking. I have looked at activity allocation and CTPosting but would like to get some advice on proper implementation of this.
Any direction, advice or support appreciated!
Thank you,
LB

Dear TEM guru,
Kindly let me the way out if u got the solution for the raised question .
Also let me know how you are dealing with Training cost advance payment and settlement .
Thanks in advance
Alok

Training and event management issue

Hi,
I have issue in Training and event management. Can employee attend two programs in same day in different location?please let me What is standard process
Regards,
Prasath

Is your question related to allowing the registration for two programs on the same day at different locations? If yes, it will be giving a warning message that your training registration is overlapping with already regestered program. That to only when the time of the programs is same. You need to implement custom checks if you would like to resist from registring for such programs.
Conceptually, it is always possible for a person to attend two programs in the same day at two locations (here location definition is company dependent and how do you define different locations of your company). So it wont resist from registring or infact if possible from participating as long as the schedule is not collaiding...

Training and Event module questions.

Hi .
I have some questions regarding Training and Event Management module.
1. IS there a way to configure a custom attendee type for this module ?
2. If no is there a way to rename a existing attendee type. I have a requirement to create a group of attendees type of External Person. I know i can use Company attendee type for grouping external person. But i need to change this Company to Group for displaying purposes. I know i can change the Company via T7778O table but won't it lead to bad consequences ?
3. Is there a way to hide tabstrips on PVOO screen ? i have a requirement to keep only Company tabstrip others are not relevant for my scenario.
That's all for now.
Thanks in advance.
Edited by: kernel.panic on Dec 22, 2010 8:47 AM

Hi,
thanks this one is ok, the one which I can not find is the info message for when the maximum capacity of the attendee list is reached:
'Optimum capacity reached, only essential or wait list bookings possible' This one I want to change into a warning message.
br,
Ovidiu
And I have a new question as well
In the Attendee List layout is it possible to add columns which are not in the column set from customizing e.g. Personnel subarea,
Employee subgroup, Employee group etc?
Thanks
br,
Ovidiu
Edited by: Ovidiu Moldovan on Apr 20, 2010 3:51 PM

Billing within Training and event management

Dear experts!
Now, I'm getting some issue about performing billing in training and event management.
- The first, I created business event, book attendees for the business event with billing.
- Second, I firmly business event, after that billing for the business event.
At the same time, the system display error: "E VF 022 Customer 0000110003: Customer master table KNVV is missing"
Really, I configured the integration between training and event management module and SD module.
Help me, please!
Best regards, Huy!

Close the question.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

DVD Event Manager = question

Similar Messages

Maybe you are looking for