DVD-MOV mpegstream clip error: "File open error: unsupported file type"

I do it all the time this is the only time i've gotten this error, i use mpeg stream clip. I have a dvd I got from a DVR recorder, I open the dvd which shows 2 VOB files in the TS folder. the MENU gives "Warning: the stream may have timecode breaks." I "Fix Now" and it works fine. But i dont want the menu. the other VOB file in the TS folder, which should be the "movie I want" gives this error when opened,
"File open error: unsupported file type"
when I open anyway, I get an audio bar which has no sound, and no video.
ANY IDEAS? I've been on this for hours PLEASE

Hi,
Do you have the [MPEG-2 component|http://www.apple.com/quicktime/mpeg2> installed on your computer? If not, you will need it to be able to convert VOB files.

Similar Messages

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

File opening error

hello friends,
i am doing data migration with lsmw withe directinput method so i did everything fine till the end i defined the logicalfiles also correctly and defined everthing perfeclty
but i am getting below error
File open error
belrd110\INPUT\CT.TXT Permission denied
can anyone let me know where this is going wrong
i am having the authorisation at the server level also and in the read and convert steps records and data coming perfectly but when i excute it at the end it is giving such error
ur help will be appreciated
Naveen

Hi Naveen,
Did you write your statment like this?
OPEN DATASET P_DOWN FOR OUTPUT IN TEXT MODE.
If it is not working, try to create a new file and access the same.
Thanks,
Sreekanth

File open error at ftp even the file is not open.....

Hi,
i get the error File open with the fm GUI_UPLOAD while uploading the XML file from FTP server.
What is interesting is that i did not open the file, furthermore i closed all the windows else that sap window,
but still i get the file open error.
We create the xml file when created a new delivery. And this xml file is sent to a bukrs's ftp and they also sent the same xml after some validations done.
When it arrives to our ftp server i make it post goods issue automatically but from yesterday i got the file open error, it was working fine just before today.
What could be the problem?
Hint: Yesterday and previous day files still work fine but files created today are faulty.
Thanks.

Thanks for replies.
My code is that:
call function 'HTTP_SCRAMBLE'
    EXPORTING
      source      = gv_password
      sourcelen   = slen
      key         = gv_key
    IMPORTING
      destination = gv_password.
describe field gv_password length gv_pwd_len in character mode.
call function 'FTP_CONNECT'
    exporting
      user            = 'HHH\GrupMMM'
      password        = gv_password
      host            = '10.10.10.10' "assume that is the host
      rfc_destination = 'SAPFTPA'
    importing
      handle          = gv_handle
    exceptions
      not_connected   = 1
      others          = 2.
if sy-subrc eq 0.
    "concatenate 'put' ld_full_path '[' ld_full_path ']'
    *gv_com = 'lcd C:\MMM\RETURN_FILES'.*
    clear mtab_data.
    free mtab_data.
    call function 'FTP_COMMAND'
      exporting
        handle        = gv_handle
        command       = gv_com
      tables
        data          = mtab_data
      exceptions
        tcpip_error   = 1
        command_error = 2
        data_error    = 3
        others        = 4.
    if sy-subrc eq 0.
    endif.
When i get the list of the return files i get data of each file via gui_upload.
CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename   = filename
          filetype   = 'BIN'
        IMPORTING
          filelength = totalsize
        TABLES
          data_tab   = xml_table[]
        EXCEPTIONS
          FILE_READ_ERROR = 1
          FILE_OPEN_ERROR = 2
          NO_BATCH = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE = 5
          NO_AUTHORITY = 6
          UNKNOWN_ERROR = 7
          BAD_DATA_FORMAT = 8
          HEADER_NOT_ALLOWED = 9
          SEPARATOR_NOT_ALLOWED = 10
          HEADER_TOO_LONG = 11
          UNKNOWN_DP_ERROR = 12
          ACCESS_DENIED = 13
          DP_OUT_OF_MEMORY = 14
          DISK_FULL = 15
          DP_TIMEOUT = 16.
However i get the open error for all files created today.
By the way, how can i use open dataset instead of ftp commands? How can i see the files at apllication server?
i get the files via IP of the FTP but how can i get files from application server?
Thanks.

FM GUI_UPLOAD gives PC036 "Error when opening the download file".

Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
Jordi

Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

BYMONTHDAY is causing the error while opening the ics file in outlook when event is exported from SharePoint Calendar

Hi All,
I am trying to parse the SharePoint recurrence data to get the RRULE for the ics file the RRULE parsed works fine for Yearly and Daily but it causes error when opening the ics file for the Monthly and
weekly recurrence recurrence. I have opened the ics file in the notepad and observed that the BYDAY and BYMONTHDAY causes the problem. If I remove the tag the file opens fine but with wrong recurrence pattern.
Any help will be appreciated.
Regards
Ajeet
Ajeet

Ajeet,
I see that this is an extremely old post, but I thought I would refresh it with a bit more info.
I wish I had found this post a few days ago. I realized the same thing as well. I don't quite understand the reasoning behind requiring the by day date must be the same as the event date. Another thing with rrecurrence is that if
you pick a day of the week for a recurrence (i.e. Friday), then the start date must also occur on a Friday (I am just casting it as the first Friday of the month).
I have come into this same issue with the BYMONTHDAY. I am currently working on trying to configure an .ICS file to allow for multiple monthly recurrences, but it appears Outlook does not support multiple days within an event (determined by trying
to create an even in Outlook and picking the recurrence option). It seems that you are only allowed to have an event on (for example) every Friday of each month, or the (x) day of each month. You cannot set any other occurrences of any other day
within the same ICS file. Hopefully someone else will find this information useful.
Cheers,
Tracy

XML file opening error using CV03N in ECC6

Experts, I am getting below error while opening an XML file in ECC6 using transaction CV03N. File was generated in 4.6C and system is upgraded to ECC6.
" The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name contained an invalid character. Error processing resource 'file:///C:/temp/ABC.xml'. Line 1, Position 35 "

Experts, I am getting below error while opening an XML file in ECC6 using transaction CV03N. File was generated in 4.6C and system is upgraded to ECC6.
" The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name contained an invalid character. Error processing resource 'file:///C:/temp/ABC.xml'. Line 1, Position 35 "

Podcasts - File Open Error N97 mini

I have successfully downloaded podcasts with my N97 mini, but when I go to open/play the podcast I keep getting a "File Open Error" ???

Podcast Library Refresh - General Error
1. Connect your 5800 to you PC in Mass Storage Mode OR connect the microSD to your PC via a Memory card reader.
2. Open Windows Explorer and browse to your memory card drive ..
- To remove and start fresh start go to E:\Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete the whole 10281e17 folder, its not harm since our device will automatically create a new structure of the folder.
TQ
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

File open error: unsupported file type Mpeg Streamclip

having a problem... I am using mpeg streamclip to convert vob files from a dvd. the problem is that the program says that the first vob file is an unsupported file type. I know that this is not true. The DVD plays, and the remaining vob files are opened and processed by the program correctly. Any advice or suggestions?

I am having the same problem. The first VOB file in the sequence will not open in either Streamclip or Quicktime. This is not the menu display image, but the first chunk of the video (the menu image actually will open). All the ones after it can be opened either individually or joined as a group.
The DVD plays fine on the mac and also in the regular DVD player. Any idea if this is perhaps some equipment fault when the DVD burner "finalizes" the disk? Am using a combo VHS/DVD-R unit. It is not super high-end, but then neither are these old home videos I'm converting.

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

"Ghost' file opening behind other files

Mac OS 10.7.3
After a few hours of working in CS6 I find that file opens behind the files that I'm currently working on.
This file always carries the name of a previously opened file, but it has no content; it has a white background but no layers - not even a background layer. No matter how many times I close it down, as soon as I start to work on another file it's back up again.

Sounds like it could be a GPU driver isssue.
Could you include your System Info from Photoshop's Help > System Info dialog box?
You could also try disabling OGL in the GPU preferences
Photoshop menu > Preferences > Performance
Uncheck "Use Graphics Processor"
Let us know how it goes!

THE FILE HAS AN UNSUPPORTED COMPRESSION TYPE

Hello frnds,
I am having an issue here in Premiere pro CS5. In CS5 new features they said we can import DVD format files into premiere pro CS5 without converting into any format but when I import my DVD files it gives me an error message saying that: THE FILE HAS AN UNSUPPORTED COMPRESSION TYPE.
Is there anyway I can sort this problem? pls help me....

Are they on your hard drive(cause running from DVD is begging for trouble)? what size are they? and what was the source you got them from? If all else fails, just convert em over(I hate working outside of the standard formats).
LOL harm asked the essential question..
Message was edited by: JaysonM-Y

PPro CC says "the file has an unsupported compression type" in one project only - .mts files

Had to re-install Ppro CC to alleviate some plugin issues. Now, one of my projects that is comprised mostly of AVCHD files(.mts) are offline, and when I attempt to relink, I get the "the file has an unsupported compression type" message. But, all other projects with the same file types are fine.
I can open another project, or start a new one, and import the .mts files from the errant project with no problem. I have also tried importing the errant project into a new project. I have trashed preferences. I have signed out of CC, then signed back in.
I'm at a loss of what else to try. Any ideas?

Ah well...
This forum has the same effect that my father did when I was a kid. As soon as I posted the above, I tried to open the errant project again, and the .mts files are now online. Same as my Dad and my car - it would be broken, and all he'd have to do is climb in and crank it, and I'd look like an idiot.

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

I backed up my bookmarks to an external drive, rebuilt my system, and now when I try to restore from that file, I get "unsupported file type" How can I restore from this file?

Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup. 
You can check that via the right-click context menu of that file and open the Properties. 
If you are not sure about the file type then you can open the file in Firefox via "File > Open File" 
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links. 
A JSON backup starts with: {"title":"","id":1,"dateAdded": 
An HTML backup starts with: <nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki>
You may need to add quotes ("") around the name to rename the file to the correct file extension.
See also:
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

DVD-MOV mpegstream clip error: "File open error: unsupported file type"

Similar Messages

Maybe you are looking for