DVWP with Multiple Item Form duplicates values on the screen on new item

Hello,
I have created a custom page in SPD called Submit.aspx. I have 3 custom lists (A,B and C). On that page I have two list webparts (from list A and B) and one multiple item form DVWP (list C). I have edited the list webparts to display the Add new item link only.
Sometimes when a user adds a new item numerical values are duplicated on the screen from the item below (see the screenshot). It happens only on the screen. When a user saves the form or refreshes it the values disappear. How can I fix this to not duplicate
the values when a new item is created. Projects on the list are sorted alphabetically. The item before the last one on the screenshot is the new item that has identical values as the last item. On save or refresh duplicate values
disappear from a new item.

Hi LetMe, it would be difficult for anyone to help you with the amount of customization you've done, unless you provide the code for us to check.
cameron rautmann

Similar Messages

1.2.0 reads TNSNAMES.ORA file multiple times and duplicates values in Alias

Since upgrading to 1.2.0.29.98 (clean install on Win XP SP 2), I have noticed that SQL Developer appears to be reading the TNSNAMES.ORA file multiple times. This results in the Network Alias pop-list on the TNS connection type to have duplicate values, although the number of duplicates for each entry varies widely - from four for the least that I saw and 252 for the most (assuming I counted that right :) ). We have approximately 270 entries in our TNSNAMES.ORA and the first entry in the file appears in the Network Alias list four times and the last entry in the file appears in the list 48 times.
To be honest, I switched to Basic JDBC connections with 1.1 and only noticed the problem because of some network performance issues - I thought that SQL Developer had hung and I switched on the debugging and could see that it was looping through the TNSNAMES.ORA file. Now that the network performance issues have been resolved, it still takes a little while to open the new connection window, but it is liveable, so I don't know whether the problem is 1.2 specific or not.

Sue,
I assume from a bit of testing, that "each tns file on the system" means each file in the TNS_ADMIN location that starts with TNSNAMES.ORA.
I set my TNS_ADMIN to a local location and copied the current TNSNAMES.ORA from the network location (and chopped it down to a handful of entries). When I restarted SQL Developer I only had a single copy of each alias. If I copied TNSNAMES.ORA to "Copy of TNSNAMES.ORA" I still only had a single copy of each alias. If I copied TNSNAMES.ORA to TNSNAMES.ORA.TXT I then had two copies of each alias.
Unfortunately, I don't have any say in the maintenance of the network TNS_ADMIN location and it has almost 200 backup copies of the tns file, typically named TNSNAMES.ORA.YYYYMMDD.
My TNS_ADMIN setting is done as a Windows environment variable. I do not have any TNS_ADMIN setting in my registry.

Create master document form with multiple sub form

Hi Dear;
how can i create a master form with multiple sub form using screen painter?
best regards;

Hi Dany,
Do you mean a form connected to a MasterData Object with multiple childs?
If so:
1. Create a new ScreenPainter form;
2. Add a Folder item for each of the childs;
3. Add a new matrix to each of the childs and change their PaneLevel to from 1 to N (N = number of childs you have);
If your code you then need to catch item pressed event for the Folder Items and change the form's Pane Level accordingly.
Regards,
Vítor Vieira

Report With Multiple Radio Button ,How to reset the values of when selected

Reaching out to the experts here. I have a report which i created a radio group which saves the value rownum when the radio buton is selected to a hidden item based on an on click event. There are currently 3 radio button , i need to be able to "reset" the value of the other items when more than of the button are selected .I.E. There are 3 buttons, user clicks button one , but then decides they need to click button two , then realizes they really wanted to perform button 3 , I want to be able to "reset" the value of the 1st two hidden items so the only value populated is the 3rd hidden item. I am new to working with these features and scenarios so any and help would be appreciated.
Here is the report
SELECT APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN1'').value=' || ROWNUM|| '"') UPDATE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN2'').value=' || ROWNUM|| '"') DELETE_RECORD
,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN3'').value=' || ROWNUM|| '"') SET_PRIMARY
,papf.first_name
,papf.last_name
,hl.meaning
,pp.phone_number
,case when phone_type is not null then (select meaning from hr_lookups where lookup_type ='PHONE_TYPE' and pp.phone_type=lookup_code)
end as phone_type
,emrg.primary_contact_flag
from hr.per_all_people_f papf
,apps.hr_lookups hl
,apps.per_contact_relationships pcr
,apps.per_phones pp
,(select contact_person_id,primary_contact_flag
from apps.per_contact_relationships pcr
where pcr.person_id = :P5_PERSON_ID
and contact_type = 'EMRG') emrg
where pcr.contact_person_id in emrg.contact_person_id
and pcr.personal_flag='Y'
and contact_type <> 'EMRG'
and trunc(sysdate) between date_start and NVL(date_end,'31-DEC-4712')
and pcr.contact_type = hl.lookup_code
and hl.lookup_type='CONTACT'
and pcr.contact_person_id = papf.person_id
and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
and pcr.contact_person_id = pp.parent_id
and pp.phone_type in (select lookup_code from hr_lookups where lookup_type ='PHONE_TYPE')

Related thread here How to Pass values from SQL Report into TEXT ITEM ?
Regards,

I am trying to upload a project with multiple tracks to iTunes. only the first track seems to be uploading. what do I do?

I am trying to upload a project from garageband with multiple tracks to itunes but only the first track is uploading. what do i do to make them all upload together?

Couple of questions:
What type of Tracks are they (MIDI, AUdio, Drummer)?
WHen you play your Project, do You hear all Tracks playing?
What happens when you change the Track order, i.e. A-B-C to B-C-A? WHen you export, do you still get only one Track and if so, is it talways the first Track in the list or a specific Track regardless if it is the first, second, or third?
Are you sure you don't have any Tracks Muted or Soloed (which auto-mutes the other Tracks)?
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

With multiple devices (.g, .n, .ac) will the Time Capsule degrade to the lowest speed, or will each run at the highest rate it is capable of?

Highest rate capable.
Things may slow down a bit if you have a number of wireless devices connected simultaneously, since they must all share the same network bandwidth.

PO item text is copied to the Financial Document line item text

A user have requested that the PO item text is copied to the Financial
document line item text, to aid them in analysis of the GR/IR account.
is there any solution to implement this ?

There is no standard setting for this requirement. Check with your ABAP team for this.

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Load oracle forms in center of the screen

Hi All,
i'm working with oracle forms using R12. when i call new forms usin call_form the new form is always loading in left side corner of the screen (starting point). but i need to load the form in center of the screen. how can i set postion when load the oracle form. please help.
Thanks & Regards,
Macks.

i'm working with oracle forms using R12. when i call new forms usin call_form the new form is always loading in left side corner of the screen (starting point).This is an expected behavior.
but i need to load the form in center of the screen. how can i set postion when load the oracle form. please help.In Oracle EBS forms, I believe you cannot achieve this.
Thanks,
Hussein

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?

I tried using the Voice Memos iPhone app and ended up with a red banner on top of the screen that flashes "recording 00.00" but I can't locate what I thought I was recording. can you help me?
jacknil

I found an answer to this on another page (I was having the same problem) This worked for me:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
more here: https://discussions.apple.com/thread/5596831

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

When pulling down a long pulldown menu, the menu, instead of starting a new row, will extend past the bottom and behind the browser so that I can't navigate to an item that's below/behind the screen.

When pulling down a long pulldown menu, the menu, instead of starting a new row, will extend past the bottom and behind the browser so that I can't navigate to an item that's below/behind the screen. FF should be making a second row for these long pulldown menus, right?

Nope, there is no second row. There should be a scroll arrow "button" at the bottom and the top of that drop-down to allow you scroll, or you can use the scroll wheel on the mouse scroll further down (or back up).

Hi apple, I have the new ipad with retina display, i have however cracked the screen pretty badly. I was just wondering how much it is to replace this ipad with the same one. It is a 32gig. Thanks

Hi apple,
I have the new ipad (4th gen) with retina display. Yesterday I cracked the screen pretty badly. I was just wondering how much it is to replace it with the same ipad. I have the 32gig ipad with wifi.
Thanks

The iPad will be $329 AUD if replaced via postage service or $309 AUD if replaced at an Apple Store. Yes they will give you the replacement and take your old iPad so I would suggest if you can back it up to iTunes so that you can restore the back up to the replacement.

HT1535 I do not get the "add to"' button on the right of the screen to add items to my iphone. Help?

I do not get the "add to" button on the right side of the screen to add items to my iphone. Help?

Please see your other post for an answer. Thank you.
Opening PDFs on iPad

My I pod screen is frozen. I've cleaned it multiple times, and have even taken the screen protector off. Yet it still won't sense my touch. Can anyone help!

My I pod screen is frozen. I've cleaned it multiple times, and have even taken the screen protector off. Yet it still won't sense my touch. Can anyone help!

Before taking it in to the Apple Store... Try this...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

DVWP with Multiple Item Form duplicates values on the screen on new item

Similar Messages

Maybe you are looking for