DW CS3 site has pages shifting left & right

I've updated part of my website using DW CS3, which I'm new
to. The site works fine other than some of the pages jump a little
to the left and some jump to the right. Pages float in the middle
of the screen and margins and paddings are set to '0' and all pages
are controlled by a stylesheet. To view site, go to
www.wedobrochures.com . I've checked everything I could think of
with no luck. Some of the pages were made from scratch and some
from a template, but that may not be significant.
Any ideas?
David

Add this to your CSS -
html, body { min-height:101%; margin-bottom:1px; }
That will force a scrollbar on all pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"david3co" <[email protected]> wrote in
message
news:fal1in$826$[email protected]..
> I've updated part of my website using DW CS3, which I'm
new to. The site
> works
> fine other than some of the pages jump a little to the
left and some jump
> to
> the right. Pages float in the middle of the screen and
margins and
> paddings are
> set to '0' and all pages are controlled by a stylesheet.
To view site, go
> to
> www.wedobrochures.com . I've checked everything I could
think of with no
> luck.
> Some of the pages were made from scratch and some from a
template, but
> that may
> not be significant.
>
> Any ideas?
> David
>

Similar Messages

Entire Page Shift left-right

A page on a website I designed shifts by about ten pixels to the left. I have several master pages with essentially the same background. The elements on the master page are not locked. Should they be? How can I see where the error is if I cannot see the HTML data? Does anyone have any idea what prompts that kind of a shift? Is it a bug? This was not happening before version beta 7.
The url is
http://www.primary-team.com/news.html
I appreciate any suggestions. Thanks,
Rich

REVISED: Since there have been no suggestions I will add this. I tried creating a new test site with the same art for background and it seemed that as long as no new pages are added to the site (menu) once much work has been complete it was stable. After adding more text to the site I'm getting the same problem again. A page shift once you click from page to page using the menu. It seems like a definite bug in Muse.
Any help?

Using cmd-shift-left/right arrows in Terminal

Hi,
Is there a way to revert to Leopard's shortcuts for switching tabs in Terminal?
I'm working on a daily basis with both Leopard and Snow Leopard and the fact that I have to use cmd-shift-left/right in the former (which is coherent with Safari) and cmd-left/right in the latter (which is coherent with I wonder what?) is extremely annoying.
I tried using System Preferences Keyboard pane to assign the shortcut to no avail, but it doesn't seem to work at all.
BTW, I really don't understand why Apple changed this shortcut. As with any application, changing shortcuts is not really considerate for end users ;P
TIA

I don't know why you have command+left or right arrow for tab switching. i have command+shift +left or right arrow. running 10.6.2 here. also, the other shortcuts for this that show up in the window menu are command+} and command+{. those can be also be changed in keyboard system preferences. that should have worked for you. i can do it without problems. but I suggest you reset your terminal preference file. that should restore teh default shortcuts. quit terminal and delete the file ~/library/preferences/com.apple.terminal.plist. start terminal and the shortcuts should be commandshiftarrows.

Pages shifting to right using library sidetabs

I've been trying to replace the flash button navigation on my
site with javascript navigation. Using Dreamweaver, I got it to
work on the index page and my preview works in my library side
tabs. However, when I update the rest of my pages with the updated
library side tabs all the content is pushed to the right of the
screen. If anyone can help me I'd really appreciate it. I've
included a link to a page in my site that shows what happens when I
upload the library item and attached the code for the library item.
Thanks in advance!!!!
http://flipmedipme.com/roscoe.html

All of a sudden, prior to installing Snow Leopard, my icons started shifting all over the screen on restart/login. Then I installed Snow Leopard, hoping this would fix some corrupted preference, but it didn't work.
Of course not. You should *+never, ever+* install a system update to try to fix a new problem. Fix the problem first, then install updates. Installing updates on a system that is experiencing problems probably won't fix those problems and may very likely make problems worse.
I've tried deleting 'com.apple.finder.plist' and 'com.apple.desktop.plist' from my library preferences, as advised on another forum, but it didn't work.
First, I would try repairing permissions using Disk Utility and then [repair the hard drive with Disk Utility|http://support.apple.com/kb/TS1417]. (Don't do these at the same time... repairing permissions should be done while booted from your hard drive. Also, be aware of [permissions messages you can safely ignore|http://support.apple.com/kb/TS1448].)
I don't know that these are at all likely to solve your problems, but they're a first good step. Next, you should try deleting the invisible ".DS_Store" file from your desktop. The easiest way to do this would be to paste the following command into the Terminal:
rm -f ~/Desktop/.DS_Store
You may need to log out and back in after doing this.
If that doesn't fix the problem, try logging in to a second user account (create one if you don't have one). Does the problem happen on that account? If so, it's a system-wide problem, if not, it's a problem somewhere inside your user folder.

IPod says it has no battery left right after it has been charged

I'm on vacation so I have to use a library computer to charge my iPod. Sometimes after I charge it it works and I can listen to it, but other times it will say it's at least partially charged, but when I listen to it after a few seconds it says it's out of batteries and crashes. This is impossible because once I was listening to it beforehand and just plugged it in to charge for thirty minutes or so, and then it said it had no batteries. How can I fix it so the iPod is working for the trip home?

Normally, an iPod's battery needs to be replaced for every 18 months. Probably it is a sign now !!
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/

Gmail compose - command left/right still broken (Mac)

This question was [https://support.mozilla.com/en-US/questions/767732 asked previously] , and was marked solved, but was never really solved.
In the 'Compose mail' window of GMail the shortcut Command-left arrow or Command-right arrow to jump to respectively beginning or end of a line, is not working. It works fine in Chrome, and Home/End work fine in Windows, but I'd rather stick to Firefox on my Mac.
A solution was proposed on the link above to remap those key combinations to Ctrl-A/Ctrl-E using other software, but these solutions are overkill, and still do not let you highlight to the beginning or end of the line using Cmd-Shift-Left/right.
Can someone at Mozilla or Google please comment?

This problem has been marked "solved" but isn't solved at all. This problem still exists, and is infuriating to any Mac/Firefox/Gmail users who like to stick to the keyboard. I've also noticed this happens in other google apps (blogger, docs, etc).

Whenever I go to a site the print gets smaller and the page shifts from left to right. I have tried everything but when I use Google Crome it always is fine. I like fowfire best and I was wondering if there is a promblem on your side.

The page shifts to the right and it happens when I go on all sites but it doesnt happen with Google

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Every morning when I awaken my MacBook Pro, I come to find that my Safari browser has been closed. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later.

Every morning when I "awaken" my MacBook Pro, I come to find that my Safari browser has been closed on it's own. How to fix this? I don't want to lose anything I have possibly typed in a site that I have left to finish working on for later. I checked system preferences and everything seems to be checked appropriately as well as for Safari's preferences.
I am not sure what's going on, because Safari only just recently started doing this and I haven't downloaded anything, nothing out of my regular computer routine. As well, I upgraded to Mavericks when it came out and I have the last version of it too. I can't imagine that Safari would close simply because I don't have or want to upgrade to Yosemite. I am holding off on the upgrade for a bit, because I heard Final Cut Pro 7 can't be run on Yosemite. While I could partition my drive, I really don't want to. Mavericks is fine for right now : )
Okay sooooo...back to Safari...what the! Please help and thanks for any replies ahead of time!
I Hope All Is Well In Your World : )
Nyna

There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
Network section.
In Network - click on Advanced - then the DNS tab
under DNS servers - use the + button to enter two extra lines
either these, from google dns
8.8.8.8
8.8.4.4
or from OpenDNS
208.67.222.222
208.67.220.220
then click OK & then 'Apply'
You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

Block interactivity but keep left/right page change...?

Hi all
I have an auto play video, and I'm trying to block the user from tapping to play / pause
I know it can be done with a pan and zoom overlay, but then this blocks the user from swiping left/right to change page
anyone know a way around this?
Tim

okay, so my solution so far has been to scrap the MSO and in the audio/video overlay creator - check "tap to view controller" then using an MSO at the bottom of the sreen to hide the controller so only the NAV BAR appears when the screen is tapped - this is a very sketchy work around and doesn't work very well for full screen videos
please if someone could help or tell me about their similar situations / work arounds
also I've found that my toll box for "media" that sits in the interactive menu, is blank? like there's nothing inside it... any ideas?
Tim

Why is my Muse homepage shifting left, leaving a blank gap on the right?

Hello,
I've had this problem since I started using Muse. When the homepages of sites I build are viewed on a tablet, they shift left, leaving a blank gap along the right side. Strange thing is that it only happens on the homepage, and the header (which is on the homepage master) stays perfectly centered. I've searched everywhere for answers and the only thing I can find is that there may be an element outside of the page. However this is definitely not the case with my files (neither on the homepages nor the homepage masters). I zoomed out and selected all, but nothing falls outside the page.
Here is the link to the site (in progress):
CONJURE DESIGNS • A CREATIVE DIRECTION, GRAPHIC DESIGN, & BRANDING AGENCY LOCATED IN NEW HOPE, PA | CONJURE DESIGNS
Here is the screen shot of how the home page looks on a tablet:
I wish I could upload the file is 18.5MB, after stripping out everything but the homepage.
Any help would be greatly appreciated.

The brain background fill image above the SERVICES heading is in a fixed size rectangle that sticks beyond the left and right edges of the page. If you make this rectangle 100% width and position the fill image centered, I believe that will address the gap at the right of your page in mobile browsers.

"Oslo.Master" set as the The default Master Page, but when record selected in "List View Web Part" page shifts to the right.

Hi All,
I have set "Oslo.Master" as the The default Master Page for the site. I have a page with a List View web part and an InfoPath Web Part connected. When the page loads is it displayed correctly. However, when a record
is selected and the infopath web part is updated, the content on the page shifts (indents) to the right.
Is there something I am missing? Does anyone know how to correct this?
Thanks in Advance!

Hi Dwayne,
I could reproduce this, as a workaround, we can use javascript code as below to hide the element in the following image.
<script src="http://code.jquery.com/jquery-1.9.1.min.js"></script>
<script>
$(document).ready(function(){
$('#contentBox').prev().hide();
</script>
Thanks
Daniel Yang
TechNet Community Support

How can I make open link in new tab cause tabs to the new tab's left to shift left rather than tabs to the new tabs right to shift right?

When I follow a link in a new tab, the tab opens to the right of the current tab as expected. To make room for the tab on the tab bar, any tabs to the right of the current tab shift right. If there is room for all the tabs on the bar, this behavior is perfect. If however, there isn't sufficient room, some tabs must be hidden to the right or the left of the visible bar. Currently the rightmost visible tab is hidden. This behavior is suboptimal for me because I very often want to switch to tabs on the far right while I very seldom want to switch to tabs on the far left. Is there is a way to cause tabs to the left of the new tab to shift left thereby hiding the leftmost visible tab? Thanks

I'm not aware of a way to make Firefox hide the first tab instead of the last tab; maybe there is an add-on with that feature.
There is a hidden setting to open the new tab at the end of the bar instead of next to the page you're reading. Then, of course, you won't have this problem. Instead, you'll have the problem that it's hard to figure out which tab had that link in it. In case you want to try it out, here's how.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false (it should turn bold)
You're done here. You can keep it open in case you hate the change and watch to switch it right back. In that case, double-click again to switch it back to true.

Page shifting to left beacuse of text column length

I have encounter a curious problem with a page shifting to the left, when displayed in IE because of the length of a column. The page has a minimum height of 500px, if the column of red type is longer than 460px, whether the column is filled with type, some type or no type, the page will shift to the left when displayed. if 460px or less, the page will not shift. When viewed in IOS6 on ipad, the page does not shift. The shifting page locations is http://www.ldpinc.com/work.html . The location of the photo block at the top of the page is exactly the same on all pages, it is only this page that shifts.
Thanks for the help.
Dan

I expect it's scrollbar related. See http://forums.adobe.com/message/5012449#5012449.

Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

Hi daneeo, and welcome to the Lenovo User Community!
In the Control Panel for your Mouse there should be an UltraNav tab. Under that tab are all the settings for the touchpad. Check to make sure scrolling is enabled.
If you do not see an UltraNav tab in the Mouse Control Panel, download and install the UltraNav driver and utility:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

I get "An unexpected error has occurred" whenever I try to create item in a list or view site permission page

I am working a SharePoint site with a custom masterpage and css. Everything displays just fine and the site functions with several subsites, and so forth. I have double-checked to ensure that important content placeholders were on the new masterpage, even
if they were "hidden" from view.
However, a new issue came up this week: I was moved from a contributor to a designer list so that I could convert word files in a doc library in web pages. When that change happened, I lost the ability to select "add new items" to lists or add
events to calendars. [not sure if causation, or just correlation] On a similar note, no one--not even those with higher permissions levels than me---can access the "site permissions" page in browser now (not sure if this coincides with my issue over
the lists/calendars, but in both cases the notification "an unexpected error has occurred" comes up).
I temporarily switched a subsite to the default masterpage, and lists and site permissions page functioned fine--no error. Therefore, it appears as though something in the custom masterpage (or embedded css?) is causing this error to come up. But what could
it be?
I ran across a forum question that mentioned a bug related to alternative css:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/53151269-dd61-4c71-8263-c1880450a1bb/sharepoint-2010-unable-to-access-site-settings-site-permissions-from-a-site-created-from-a-template Solutions
said to check the correlation ID and use powershell. The guy in my department who checked the correlation ID said that nothing useful came up, and I got the impression that the powershell solution didn't work out for him either (I don't work on that side of
things; I am on the design side).
So, does anyone have any idea what the problem could be? Again, I have checked and double-checked those content placeholders in my custom masterpage - they are all there. I built the site using one of Randy Drisgill's masterpage templates.
Up until this point, I haven't had any issues with the template, my custom code, etc.

I am having the same issue, was this ever resolved?

DW CS3 site has pages shifting left & right

Similar Messages

Maybe you are looking for