To Simulate PR creation and capture errors in SRM

Hello Experts,
We are on SRM 7.0 EHP 1, classic scenario.
SC is created in SRM, post which, PR and PO gets created in ECC.
Sometimes, though SC is ordered successfully, it goes into error due to various reasons. (Mostly PR creation at ECC fails due to some data error etc)
Is it possible that:
In SRM, once we order SC,
> it will simulate PR creation in backend, Instead of actually creating a PR
> capture error if any at the time of PR creation simulation
> and display the same to user in SRM? So that user knows what the error is and hence can modify data and order SC successfully at one go?
Will it be possible to do this custom enhancement? Any pointers?
Is it possible to trigger an email to appropriate requestor based on RZ20 status? (As RZ20 captures error, can we send the SC error reason to requestor? But again this will increase requestors work of re-ordering the SC)
Are there any other simpler/better options?
Thanks,
Dhananjay

Hello Ankit,
Thanks for your reply.
1. We do not have SC approval process in SRM. Once the SC is ordered its get auto-approved. So is there any BADI which I can utilize to simulate PR creation > capture error > and display it to Requestor?
2. In the case email notifications, will it be possible to send the exact error reason for SC error? Do we have any standard FM to do this? or it will be custom code query on standard tables?
Pls let me know.
Thanks,
Dhananjay

Similar Messages

Install Updates step fails in Build and Capture (error code 87D00272)

Hello,
I was really hoping someone could help me with this.
Background information:
- We have a CM07 server in a production environment.
- I've set up a CM12 RTM server, following the guides in this forum, with the hopes of migrating soon.
- I wanted to do OSD from scratch to learn more and to take advantage of new features in CM12.
- I have a few virtual machines running for testing OSD/apps (these are the only clients managed by my CM12 server).
- Since it's not possible to have two WDS servers running at the same time AFAIK (without using registry tweaks, the F11 trick, that by the
way doesn't work for me) I have created a bootable TS media that I mount on the virtual machines whenever I want to test OSD.
Now, to my problem:
I can't figure out why my Build and Capture TS is failing on the Install Software Updates step. smsts.log file says: Failed
to RefreshUpdates, hr=087d00272, followed by: Failed to run the action: Install Software Updates. Component is disabled (Error: 87D00272; Source: CCM).
I have read about similar issues occurring in CM07 capture task sequences since the machine is joined to a Workgroup. The proposed solution was adding SMSSLP=FQDN to the client installation properties, but since that functionality is moved to the MP in CM12,
it should be enough to specify SMSMP=FQDN in my case. It's not working anyway. Tried it to a Deploy TS also, where the machine is domain joined, but I got the same error.
The error code 87D00272 returns no results on Google. This stumps me, as someone surely has had the same problem? Here are the relevant portions
of the smsts.log file
If someone had the chance to look at this, I would greatly appreciate it. Thank you!
Refreshing Updates InstallSWUpdate 2012-06-13 10:15:33 228 (0x00E4)
spInstall->RefreshTargetedUpdates( spCallback, &bAlreadyCompleted ),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,467) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Failed to RefreshUpdates, hr=0x87d00272 InstallSWUpdate 2012-06-13 10:15:34 228
(0x00E4)
RefreshTargetedUpdates(spInstall, spCallback, bAlreadyCompleted), HRESULT=87d00272
(e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,1295) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
RefreshUpdates(), HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment
\installswupdate\installswupdate.cpp,906) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
InstallUpdates(pInstallUpdate, tType, sJobID, sActiveRequestHandle),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\main.cpp,248) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Setting TSEnv variable SMSTSInstallUpdateJobGUID= InstallSWUpdate 2012-06-13
10:15:34 228 (0x00E4)
Process(pInstallUpdate, tType), HRESULT=87d00272 (e:\nts_sccm_release\sms\client
\osdeployment\installswupdate\main.cpp,304) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
Process completed with exit code 2278556274 TSManager 2012-06-13 10:15:34
912 (0x0390)
---------! TSManager 2012-06-13 10:15:34 912 (0x0390)
Failed to run the action: Install Software Updates.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:34 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:34 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionRetCode=-2016411022 TSManager
2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager
2012-06-13 10:15:35 912 (0x0390)
Clear local default environment TSManager 2012-06-13 10:15:35 912 (0x0390)
Let the parent group (Setup Operating System) decides whether to continue execution
TSManager 2012-06-13 10:15:35 912 (0x0390)
The execution of the group (Setup Operating System) has failed and the execution has
been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2012-06-13
10:15:35 912 (0x0390)
Failed to run the last action: Install Software Updates. Execution of task sequence
failed.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:35 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:35 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Launching command shell. OSDSetupHook 2012-06-13 10:15:45 1932
(0x078C)
executing command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
executed command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:
\nts_sccm_release\sms\client    asksequence    smanager    smanager.cpp,756) TSManager
2012-06-13 10:16:57 912 (0x0390)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2012-06-13
10:16:57 912 (0x0390)
TSManager 2012-06-13 10:16:57 912 (0x0390)
Task sequence execution failed with error code 80004005 TSManager 2012-06-13
10:16:57 912 (0x0390)

I can add that I've looked at the Site Status in the Monitoring tab, and everything looks green apart from some Warnings about User and System Discovery. In Component Status, I have a warning about the Distribution Point on C$. I thought placing a NO_SMS_ON_DRIVE.SMS
file in the root of C: would mean no stuff was placed there? I can't see anything SCCM related, but it seems that it has placed a DP on C:?
The error message about DP is:
Distribution Manager has not tried to install IIS component of operating system to distribution point "["Display=\\CFGMGR-SRV.zenit.brummer.se\"]MSWNET:["SMS_SITE=PS1"]\\CFGMGR-SRV.zenit.brummer.se\". You should install and configure IIS manually. Please
ensure RDC is also enabled.

Back ground scheduling and capturing error log

hi friends,
i have to write a report and call a function module for passing one by one those conversion progs which fm is suitable what it is
one more boubt like i can maintain those conversions in structure and i can loop those one by one passing into fm
i have to capture those error records
i have to check whether the coversions runs properly or not.

Hi,
create one error table store messages in that.
using sy-subrc you can identify status.
for capturing put some condition to identify error records.
Write subroutine for updating table with error messages.

Creation and checkout errors, duplicate transactions using iPhoto print projects?

My fiance and I have been using iPhoto to create calendars to give away as gifts for a couple years. I have had multiple problems with the latest iPhoto. They occurred on two Macbooks on two different wireless networks (an old white MB from 2006 running Snow Leopard, and the other an MBP running Lion), both with the latest iPhoto. Apple Support told me I should have used Time Capsule to avoid the first two of these errors (which, I was told, are documented bugs in their software). I was bummed because I initially spent around over 8 hours building the print book project!
- Fonts changing when opening journal print book projects (fixed by completely restarting an 80 page book :-/ )
- Pages cannot be rearranged in print books - they actually swap rather than drag and drop (fixed by again, completely restarting the project!)
- When checking out, in calendars have an unspecified error and I have to cancel and fix individual photos (fixed by canceling
- Photos randomly become blank icons and I have to reupload the photos
- Photos that are dragged and dropped into a calendar don't show up in a random spot in the project and I have to go find them
- When ordering calendars for this holiday season, errors when uploading have resulted in 16 duplicate transactions on my debit card resulting in over $400 of pending transactions that have been unable to be resolved by Apple Support
Has anyone else experienced these problems? Any real fixes?

If you're using iPhoto 5 as you say then, yes, 24k photos is heading close to the Limit of 25k. iPhoto 6 is good for 250,000 images, iPhoto 11 is good for 1,000,000.
I'm going to guess that's a typo and that you have iPhoto 9.5.
I've simply never heard of "too many photos" causing the problem you describe. You don't need more memory. You don't need to break up the Library. "Flushing Memory" is a non-isssue. One of the big improvements in 10.9 is in memory management.
There are a couple of ways to break up a Library while preserving everything. It's dead easy with Aperture - export projects as Library - you can do it with iPhoto simply by duplicating the Library and deleting from the two libraries or use iPhoto Library Manager.
But, as I say, 24k is a small Library. My main library is more than twice the size of that.
Are Aperture and iPhoto using the same Library?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Capturing error records and messages in BDC ?

Hi Experts,
I am recording a infotype using BDC recording and I got successfull updation in recording.But I dont want the output message generated by BDC recording which is obtained by perform bdc_transaction using 'pa30' generated by recording.
I want to capture the success pernr values and its correponding messages in a seperate internal table.Then want to capture error pernr values and its messages in a seperate internal table.
Give me sample coding to fetch those values. Think that my internal table which contains pernr values for recording is int_0007.from this internal table I am recording values.Give me coding to collect success anf error pernr values and its messges in seperate internal table.
Thanks,
Sakthi.C
*Assure points for valuable answers*
Message was edited by:
        Sakthi Saravanan C

DATA : BEGIN OF T_UPLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
       END OF T_UPLOAD.
DATA : BEGIN OF T_DOWNLOAD OCCURS 0,
         MATNR LIKE MARA-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         PLANT LIKE RMMG1-WERKS,
         MSG(200),
       END OF T_DOWNLOAD.
DATA : T_BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE.
DATA : WA_BDCMSGCOLL TYPE BDCMSGCOLL.
DATA : ERR_LOG TYPE MESSAGE.
Set the parameters for Call Transaction
CLEAR WA_CTU_PARAMS.
WA_CTU_PARAMS-DISMODE = 'N'.
WA_CTU_PARAMS-UPDMODE = 'S'.
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'.
Call Transaction MM01
IF W_FLAG NE 'X'.
    <b>CALL TRANSACTION 'MM01' USING T_BDCDATA OPTIONS FROM WA_CTU_PARAMS
                                             MESSAGES INTO T_BDCMSGCOLL.
    COMMIT WORK AND WAIT.</b>
    DESCRIBE TABLE T_BDCMSGCOLL LINES N.
    IF N <> 0.
      LOOP AT T_BDCMSGCOLL INTO WA_BDCMSGCOLL.
        CLEAR ERR_LOG.
        W_MSGNO = WA_BDCMSGCOLL-MSGNR.
        CALL FUNCTION <b>'WRITE_MESSAGE'</b>          EXPORTING
            MSGID = WA_BDCMSGCOLL-MSGID
            MSGNO = W_MSGNO
            MSGTY = WA_BDCMSGCOLL-MSGTYP
          IMPORTING
            MESSG = ERR_LOG.
Error that occurs during transactoon
        IF ERR_LOG-MSGTY = 'E'.
          MOVE-CORRESPONDING T_UPLOAD TO T_DOWNLOAD.
          MOVE ERR_LOG-MSGTX TO T_DOWNLOAD-MSG.
          APPEND T_DOWNLOAD.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
regards
vinod

Windows 8.1 Deploy and Capture stops with no error

I have a standard deploy and capture TS for Windows 8.1 using the volume media 'install.wim' file.
The only modification I have made is to add a few applications into the TS.
Once started from WinPE, the TS goes smoothly, deploying the OS and the applications. It then restarts and just goes to the login prompt. The TS doesn't continue as expected, rebooting to WinPE and running the capture.
I've checked the smsts.log file and I cant see any obvious errors or anything that could cause this behaviour. The only warning I can see is 'Active reqeust handle is empty, registering with new active request handle' though I'm not sure if this is even
related.
So the process I see is:
Boot to PXE WinPE
Select build and capture TS for windows 8.1
Install OS
Install Apps
Restart
Login screen
Anyone have any ideas?
SCCM 2012 R2
Windows 8.1 Professional

Found the solution.
Was due to one of the apps I was installing requiring .NET 3.5.

Capture error and outputstream of DOS from java program.




I'm facing following problem:
1. I have a Java program which calls other java program.
2. I call the other java program by:
---> I run the batch file.
Process proc =Runtime.getRuntime().exec(batchFile);
---> This batch file calls the java program.
Now In my main application that is main java program I'm capturing error and output stream of DOS command
line so that it will be displayed by my swing application.
proc.getInputStream() and proc.getErrorStream().
But I'm not able to capture the error stream
If I don't capture the streams and run command window it will display error as
well as o/p on command window.
I'm not getting what is going wrong over here.
Thanks in advance.
Lee

http://forums.sun.com/thread.jspa?threadID=5392079&messageID=10739096#10739096

SUBMIT rfebbu01 AND RETURN - not capturing errors

Hi All,
We are using following code SUBMIT rfebbu01 AND RETURN
      USER sy-uname
      WITH anwnd    = gstr_febvw-anwnd
      WITH s_kukey IN gr_kukey
      WITH jobname = ''
      WITH buber    = 'A'
      WITH valut_on = gstr_febsca-buch_val
      WITH mregel   = '1'
      WITH bnkgroup = ''
      WITH nebgroup = ''
      WITH function = 'C'
      WITH mode     = gstr_febsca-jmode
      WITH p_statik = cc_x.
CLEAR gc_message.
    CONCATENATE 'Routing No : ' gstr_paymentlot-bankrouting ' Bank Account : ' gstr_paymentlot-bankaccount
      ' Amount : ' gstr_paymentlot-amount ' Posted to Loan system. Group Id : ' gc_group INTO gc_message.
log the payment record to application log
    CALL FUNCTION 'ZUT_LOG_EMMA'
      EXPORTING
        object    = 'FICA'
        subobject = 'MAPAYP'
        header    = gc_external_id
        info      = gc_message
        msgty     = 'I'.
this is to post payment to Loans.
We have a custom program that calls the above program.
We are trying to capture errors and put it into log but errors are not passing back to custom program.
So users assum all is ok but it was found that sometiems posting was not successful but we still did not receive any errors.
Please suggest what aer we missing?
thanks in advance,
Heena

Try SUBMIT ... EXPORTING LIST TO MEMORY and then analyze the list returned by the first program. You'll find examples for such code on SDN.

Log and capture big problem

I am using FCP 3 (fully registered) i hit the log and capture NOW feature, and the screen brightness drops in half and a message that says I have to restart my computer and freezes up my computer. The message is in 4 different languages making me think that it may be a computer error rather than a FCP message.
I deleted my FCP plist file, and the FCP user data, preference file and the POA cache file. Problem is still there.

That's a kernel panic - whole system stalling.
Do you have both FCP 7 and FCP X installed?
If so, did you follow installation instructions provided by Apple:
http://support.apple.com/kb/HT4722

Officejet Pro 8600 e. Problem scanning from Scan and Capture App in Win 8.1

Officejet Pro 8600 e. New.
Installed on HP Envy 23 Touch. Running Windows 8.1.
Wireless set up. Prints fine. Problem is scanning from the HP Scan and Capture Software App in Win 8.1
Using Scan and Capture App I can scan photos fine. They come out clear. Scanning documents in GRAY has multiple bands/lines in gray over the entire page running vertically. Scanning documents in COLOR are fine.
Also, if I scan from the printer directly using the touch screen on the printer, the scan output is fine.
I did the Scan utilty to discover any errors and it did not show any. I think it's a software error. I am going to uninstall the HP Scan App and then reinstall. So, I will do the uninstall/reinstall and report back.
Also, I would like to know if there is a desktop program for scanning? I would prefer to use that instead of the Modern HP Scan and Capture App.
Thanks....
This question was solved.
View Solution.

Hi artrum,
I understand you've been experiencing issues scanning from your Officejet 8600 using the Windows Scan and Capture program. I will certainly do my best to help you with this!
From what you've explained, I believe you're correct, it does seem like it's an issue just with the Windows Scan and Capture program and as you've been able to scan from the front panel of the printer you definitely have the HP software installed. What I'd like to do is have you use the HP Scan software, where you should no longer run into issues.
To access the HP Scan software and be able to access it easily from your desktop I'd like you to follow the steps below:
1. Go to your start screen and just start typing File Explorer. You should be able to then open it to access your computer's files.
2. Then open Local Disk (C: ), followed by Program Files (x86), followed by HP, then HP Officejet Pro 8600, followed finally by bin.
3. In the bin folder you should see HPScan. You will want to right click on HPScan and go to Send To and then select Desktop.
Now you should see HP Scan on your desktop and be able to open it and scan through that application.
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Scan and Capture minimizes to taskbar immediately and does not allow scan selection

Scan and Capture was working great prior to upgrade to Windows 8.1 and (I think) and upgrade to V1.4. I vaguely recall using some app from HP to uninstall the previous version...
Current symptoms are that the app will fire up, briefly show the splash screen, and then immediately minimize to the task bar. Clicking on the app in the task bar will bring the splash screen back up briefly, followed by minimization again to the task bar. The app can be closed by right clicking the app on the task bar.
I have uninstalled the app and reinstalled to no avail. My guess is that there is some registry junk left behind during the uninstall that needs to be scrubbed. Probably a function of the uninstall of the previous version?
App works just fine on another Win8.1 PC with the same printer, so I doubt it is a hardware or network issue, however, for completeness, the scanner is an HP CM1312nfi MFP and the PC is an HP Pavillion, [email protected], 8GB RAM, running 64 bit Win8.1 Pro with Media Center.
Thanks for any pointers.

To follow on...
I reinstalled the Complete Package. Subsequent to this install, the legacy HP Laserjet Scan (with UI from 2009) and the legacy Windows Scan and Fax applications connect and scan from this MFP just fine.
The Metro apps (Windows Scan and HP Scan and Capture) do not. The Window Scan (Metro) gives a "Problem Connecting to Scanner" error.
The HP Scan and Capture has the same behavior as before -- splash screen for a second and then minimized to the task bar. I have also tried to launch HP Scan and Capture from the HP AiO Metro app with the same results.
To sum up, the WinXP applications work. The Win8 applications do not.
Junk in registry? Or driver issue?

Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

Hello,
We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
Can someone throw more light on the customizing/BADI/enhancements etc required??
Thanks and Regards..

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

Background job fails for BDC profile creation and role assignment

Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
   1. ZMIS_AUTH_OBJECT_CREATE
       Variant : auth-create
   2. ZMIS_AUTH_ASSIGN_TO_ROLE
       Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
Chetan

Hi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
        EXPORTING
         ctu                    = 'X'
         mode                   = p_mode
         UPDATE                 = 'L'
*   GROUP                  =
*   USER                   =
*   KEEP                   =
*   HOLDDATE               =
         nodata                 = '/'
         g_authname_001         = 'ZDUMMY_MIS'
          g_targetauth_002       = wa_tab-auth
          g_authtxt_003          = wa_tab-short_desc
          g_authtxtmd_004        = wa_tab-med_desc
         marked_04_005          = 'X'
          g_authtxt_006          = wa_tab-short_desc
          g_authtxtmd_007        = wa_tab-med_desc
         tctiobjnm_04_008       = 'ZBUS_UNIT'
          g_authtxt_009          = wa_tab-short_desc
          g_authtxtmd_010        = wa_tab-med_desc
         marked_05_011          = ''
         opt_01_012             = 'EQ'
          low_01_013             = wa_tab-bu
          g_authtxt_014          = wa_tab-short_desc
          g_authtxtmd_015        = wa_tab-med_desc
         marked_04_016          = 'X'
          g_authtxt_017          = wa_tab-short_desc
          g_authtxtmd_018        = wa_tab-med_desc
         tctiobjnm_04_019       = 'ZCONTRCT'
          g_authtxt_020          = wa_tab-short_desc
          g_authtxtmd_021        = wa_tab-med_desc
         marked_05_022          = ''
         opt_01_023             = 'EQ'
          low_01_024             = lv_contract
          g_authtxt_025          = wa_tab-short_desc
          g_authtxtmd_026        = wa_tab-med_desc
          g_authtxt_027          = wa_tab-short_desc
          g_authtxtmd_028        = wa_tab-med_desc
          g_authname_029         = wa_tab-auth
* IMPORTING
*   SUBRC                  =
       TABLES
         messtab                = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
      CLEAR wa_text.
      wa_text-text = wa_role-desc.
      wa_text-langu = 'E'.
      APPEND wa_text TO it_text.
      wa_jobrole-agr_name = wa_role-role_name.
      wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
      wa_method-usmethod = 'CHANGE'.
      CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
        EXPORTING
          jobrole          = wa_jobrole
         parent           = wa_parentrole
         method           = wa_method
       TABLES
*   RETURN           =
         shorttext     = it_text
*   LONGTEXT         =
*   MENU_NODES       =
*   MENU_TEXTS       =.
    ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message .
   COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan

PE 7 memory and export errors

In Premiere Elements ver 7, I have put together a 4 1/2 minute video made up of mpeg4 HD 720p mixed with regular avi digital footage. I am having memory errors and export errors when trying to render into a wmv or mpeg file. When working on previous videos with non-HD footage, I didn't have these issues. I also recently put together a 1 minute mpeg4 HD 720p video rendered into HD 720p wmv file without any issues.
1) memory errors - I got these when I was putting the video together and when rendering. After a lot of restarting the PC and reworking the video, I was able to finally complete in pre-render format. It includes music soundtrack and transitions/effects.
Here are my PC's specs:
Dell Inspiron 530 with Intel Quad Core CPU 2.66Ghz processor
4 GB RAM
32 bit OS
Windows Vista SP1
When rendering, I get the "caution - low memory, save your work" message. I have since set the virtual memory paging file size per Technote kb404939. This seems to have helped a little bit but still getting the message even though it continues to render....but then I get the export error message....
2) Export errors - I first tried to render into a wmv HD 720p 30fps file. In the first 1 of 2 rendering phase, I got the "Export Error - failed to return a frame - cancelling operation" message. I checked for gaps in the timeline and there are none. Even though I do have some black space/dip to black sequences, I can "page down" through the entire movie without any pauses or hiccups with the CTI (Current Time Indicator).
I then tried to render into a smaller wmv LAN speed file, and it went through the first 1 of 2 phases rendering (with the low memory message but it kept on going). Just after it started into the 2 of 2 rendering phase, I got an error message saying "Export Error - Unknown Error".
What to do? I'm very frustrated at this point after a great deal of time invested in this video and troubleshooting the issues. Please help. Thanks.

What are the sources of your video? What types of camcorders did this video come from?
Premiere Elements supports AVCHD video, but does not work well with video from Flip and webbie camcorders, which use proprietary codecs. They can also use non-standard frame rates. Conversion is usually necessary before the files can be edited in Premiere Elements.
And does your DV footage come from a miniDV camcorder captured over FireWire? And what project settings are you using in Premiere Elements.
I would also not recommend mixing HD and DV footage in the same project. This could also be contributing to your problems.
I also recommend you visit Windows Update and manually download any (even non-critical) updates. Vista should be at least on SP2. You may also want to download the latest version of Quicktime.

Capture error-"this operation could not be completed as there is no video"

Help!!
Project Due to client very soon. I've got my XL2 hooked up to my mac and capture was fine until the above(subject) error message popped up. All connections are tight, and I've tried changing, switching and trashing preferences. I spent a 100 bucks for 15 minutes of support from some FCP support company, there solution was temporary. They had me Turn off the G5, and disconnect everything. Upon restart capture worked for about 10 more minutes then error message popped up. Don't know what else to do, don't want to spend a 100 more dollars?
Help!!!!

Canon cameras are notorious for not behaving if you have any other FW Devices working on the System - this includes External Hard Drives.
Try removing any other FW devices - then re-setting the FW Bus as Jerry suggested. THEN connect up your camera and turn it on (VTR mode) - THEN start your Mac.
Don't pay anyone for support - it's all here - for free!
Good luck,
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

To Simulate PR creation and capture errors in SRM

Similar Messages

Maybe you are looking for