DW CS3 Text wrap question??

Hello, can you guys help me figure out why the text is wrapping under these photos?  http://www.cvbcmanteca.org/ministries.htmlThe site is based on a template, but I needed to add more of the same on the page, and just went into the code and copied the code and inserted.  I thought it would have duplicated the look, but  for some strange reason, text is wrapping below the image under the "Filippino Ministry" and "fit ministry" section about middle down the page.  How do I keep it in the area to the right?
Thanks Guys

I'm sorry. It was late when I posted my first reply and I am dealing with a terrible cold right now so I didn't notice the error my coding took on when I posted it.
There are two ways to prevent this:
As stated above, you could add a number of "spaces" which read as " &-n-b-s-p-;" (without the quotes and dashes) as follows:
...and get involved in learn relevant lessons                                          from God's Word.
, or add the pixels to the bottom margin of the images in the style sheet as follows:
.category img {
     margin-right:15px;
        margin-bottom:20px;
     border:none;
     float:left;
Hope that helps a little more. Adding the 20px to the stylesheet does the trick and is by far the easier of the two. (see attahced result)

Similar Messages

  • ID CS3 - text wrap doesn't work at the end of a long multi-columned text frame

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

    Did a search - don't think this specific issue has been addressed:
    We design large graphics often used on walls. When working with a text frame that that was 11 feet long and had 8 columns, text wrap would not work on an image placed in the last column. The same image with the same text wrap applied will work fine anywhere else in the text frame. I found that if I shortened the width of the text frame a little bit at a time eventually it would work, but there doesn't seem to be a specific cut-off width - sometimes the last column won't text wrap when the frame is 115 inches wide and sometimes it doesn't work when the frame is only 80 inches wide. Again, all of the other columns work fine. I have tried all of the obvious stuff, the only variable between the columns that wrap and the one that doesn't is it's position at the end of the text frame.
    We have gotten around this issue by using multiple threaded frames instead of one long frame with multiple columns, but I am curious if anyone else has run into this or might know what the issue is.
    thanks

  • ID CS3: Text Wrap stopped working!

    I suddenly have an odd problem: a text box that refuses to honor the text wrap setting on another box. The one that is supposed to force the wrap does have the wrap turned on. The box that is supposed to honor the wrap setting is not set to ignore the text wrap.
    I've tried the common fixes like going into composition preferences and toggling on and off the "Text Wrap Only Affects Text Beneath" box, and trashing ID's preferences. In addition, I have run Onyx to repair permissions and run maintenance scripts, and in desperation also cleaned the font cache.
    I'm really stumped here. The box that the text is supposed to wrap around is an object that I keep stored in a library (a column head for a regular contributor to a magazine), and it has performed flawlessly for months. Nothing is changed in that respect from the previous issue of the magazine. The two boxes are on different layers, but that has been no problem in the past.
    I should add that the problem is not limited to that particular library item; it seems to also happen with other column heads from that same library.
    Does anyone have any hints as to where I should go from here? I'm at a bit of a loss

    Finally discovered the problem. Somehow my text box default had changed from text wrap off to text wrap on (I'm sure I wasn't paying attention at some point) and, with both text boxes set to wrap, they were somehow canceling each other out.
    Once I shut off the text wrap on the article box, everything snapped back to normal.
    (whew)

  • AFX CS3 Text Bevel Question

    I am trying to bevel text that has a 10px stroke. I want the bevel to affect the fill and not the stroke. Is there an easy way to do this?
    Thank you!

    You could duplicate the layer and have the stroke separate while the layer with the fills only has bevel. to simplify further handling, you could possibly pre-compose. If you use text animators, you can link them across the multiple instances using simple pickwhip expressions to keep thme in sync.
    Mylenium

  • Text Wrap options not showing in InDesign CS3

    Using InDesign CS3 on a Mac 10.4.  I've had this problem for a couple of months now and it's getting past the point of annoying.  When I open my text wrap options pallete it's blank even when I expand options.  I can see the text wrap icons in my header panel, but I no longer have options to change the right/left/top/bottom margins.  Just a general "add wrap" and "remove wrap".  Is there any way I can get my pallete back?  I've tried defaulting my tools, but still it does not show up.  I don't know what to do to get it back.

    Did you try resetting preferences? While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files. If you don't get the message about deleting preferences, you weren't fast enough.
    http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
    Ken

  • Text wrap dialogue box is blank in CS3

    I am not able to view the options in the text wrap dialogue box - why? I have restarted InDesign and my computer but there are no options showing in the dialogue box. I use text wrap all the time so this is a major problem for me. Thanks for your help!

    Try resetting preferences. http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
    Immediately after starting Indesign, hold down Ctrl-Alt-Shift (Shift-Opt-Cmd-Cntrl on Mac). If you don't get a message about deleting preferences, you weren't fast enough.
    Ken

  • Text-wrap problem ID CS3 on Intel Mac

    I've recently been upgraded to an Intel Mac workstation running Leopard and for the most part, the transition has been smooth.  However, I just noticed today that I cannot get "detect edges" to work on a text wrap around an object with a transparent background in a placed Photoshop file.  The detect edges only works if I have a white background.  I've never had this problem before, so I wonder if it's a result of my new computer.  I use this function of text wrap constantly, and I'm hoping someone knows if this is a known bug and if there is a work around.

    You don´t have to use detect edges feature for extracted PSD-image.... just select a proper Contour Options Type, Alpha Channel for instance.

  • I can't get Text Wrap to work for me CS5

    Hello,
    Okay, time for my stupid question of the week! I am having lots of trouble getting text to wrap around an object. I'm almost embarassed to ask this, since it's so basic.
    I am using the 30 day trial version of CS5.
    I have tried everything. I've followed the following tutorials and nothing happens when I press Object >Text Wrap>Make.
    http://designertoday.com/Tutorials/Illustrator/5616/Wrap.text.around.Image.Illustrator.CS3 .Tutorial.aspx
    http://www.justskins.com/forums/wrapping-text-around-an-37063.html
    http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-63efa .html
    http://www.blog.spoongraphics.co.uk/tutorials/wrapping-text-around-an-image-in-illustrator
    All the tutorials have different instructions. I have tried them all and tried so many variations. From what I can piece together, this is the correct sequence:
    create new page
    use the rectangle tool to create a rectangle
    paste text in rectangle (I've also typed it in)
    file>place and select image (I've tried pasting it in too)
    select only image and ensure image lies above text in layer box
    object>text wrap>make
    I've tried all sorts of variations - selecting image and text, selecting text only, pasting image instead of placing and  get the same result.
    Any assistance that can be offered would be much appreciated.
    Mary

    Text and object MUST be on the same layer.
    Text MUST be on top of object to be wrapped.
    Text MUST be area text.
    Are all of the above true?
    From reading your steps, you've got the text behind the object to wrapped, becuase you created the text, then placed/pasted an image. If you were to place/paste the image, then create the text, you'd be set.
    Select the text and choose Object > Arrange > Move to front. Then try wrapping the text.

  • Text wrap not working... What am I doing wrong?

    Hi... I guess I do not know how to set up the text wrap in reflow to follow the size of the container that it is in...
    I have created a text box with the text the size I want and the width and hight of the box is correct... While editing the text it wraps correctly... But the moment I un-select the the text it ignores its container and overflows... Basically goes from being vertical text back to horizontal... I tried the different overflow options in the layout tab but no luck...
    Here are some images for reference... This one is correct and following the wrap (but only happens when i am editing the text)
    But then when I deselect the text... The wrap goes away and this happens... Even though you can see the container is still the same width...
    My plan is to have it be vertical for desktop browser sizes and then be horizontal for mobile and tablet... I was really hoping it was as easy as setting the size of text box... But it is not seeming to work...
    Thank you for any help!!!

    Just tried adobe direct support via chat to get help on this.... OMG I wanted to blow my brains out... So very very unhelpful and a complete waste of time.... They had no idea and said moderators on the forums would be better support... I explained that I had asked this question on there several days ago.... Getting so over adobe... WOW!

  • CS4 text wrap over anchored object

    Every time I place an anchored object (doesn't matter if it's graphic or text frame) and apply text wrap, Indesign freezes permanently and only solution is killing it via task manager.
    I opened CS3 file with anchored objects w/ txt wrap and the same freeze happens when trying to move, delete or apply different wrap settings to object.
    It never happened in previous version of ID on my machine.
    Any solution to this problem? Thanks.
    My PC conf.:
    AMD x2 2.7
    2GB RAM
    Vista 32bit

    The first thing to try is replacing your preferences.
    http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html

  • CS4 Text Wrap issue - HELP!

    HELP!  I taught myself PageMaker 6.5 and I got REALLY good at the basics, but not so great at the in-depth things.  Consequently, when I upgraded to InDesign CS4, the same holds true, so please feel free to treat me like a 2-year-old in your explanations.  Now for my dilemma:
    I create a quarterly magazine.  Most of the pages are 2- or 3-column spreads.  Many times, a photograph (and its caption) will span more than just one column, but not necessarily the entire width of two.  In other words, my photo could span all of column 1 and 1/2 of column 2, with the text flowing to the right of the photograph, then expanding to fill all of column no. 2 beneath it.  In PageMaker, when I text-wrapped around the pic, leaving enough bottom text wrap to insert my captioning, the text would wrap perfectly, keeping the text in perfect alignment horizontally across the columns.  That, in turn, kept the bottom edge of all my columns exactly equal. 
    In InDesign, however, that's not the case. The text doesn't align equally horizontally across the columns, hence ruining my clean horizontal text margin at the bottom.  This happens any time I have a photo that spans all of one and part of one (or two, in the case of a centered photograph) column.  In fact, even if I place a photo that fits within just one column, the horizontal text alignment gets screwed up.  I'm attaching a .pdf of page 35 of the issue I'm working on to show you what I mean.
    I've tried choosing all three columns and clicking the "align top edges," but that just drags all three columns up to the 1/2 inch margin at the top of the page, and my text actually starts 1/4" beneath that (3/4" from the top page edge) because of the page numbering, and when I drag all three columns back down to the 3/4" mark, the wrapping gets all screwed up again.  So I tried "align bottom edges," and that didn't work either (it worked to a point... anything that actually had text flowing to the bottom of the column was fine, the same thing occurred then above the column with a photo spanning all of it.  Geez, I'm confused just trying to explain it.  Hopefully, the attached .pdf will help make sense of this.  
    Consequently, I'm moving columns manually for this issue (all 60 pages of it), because it has to be at the printers by the end of the weekend and I'm just plain out of time.  If anyone can give me some guidance so I don't have to do this again next time, I'd really appreciate it.
    You can email me at [email protected] if you have any ideas. Thanks for your help.
    Barb

    Thanks so much to both Peter and Bob.  I'm sure this will fix the problem.  At least I know it wasn't something I was doing wrong and it really is a glitch in the program.  I'll play with the baseline grid, since it seems that will be the best option. I have a few months to experiment with it before the next issue goes to press.
    Does setting a preference act like a default?  In other words, will it then apply to all pages in all new documents I create or is it specific to the document in which I'm working when I set it? If the latter, I'm guessing I can just include it when I set up my master page so it will apply throughout the issue?  Which, of course brings me to yet another question: how do I save my Master Pages so I don't have to redo them with each issue?
    I'm finding that the majority of InDesign is a lot more user-friendly and easier to navigate than the old PageMaker -- many fewer steps for the same end result.  I hope to take a class if I can find one in my area, because I'm certain I'm doing many things the "hard way."  Learning as you go is okay, but you miss a lot of the finer points along the way and spend entirely too much time trying to figure things out or bugging people like you in this forum.
    I apologize if some of what I ask seems rather elementary. 
    And Scott, sorry, but I've always felt that, out of all the fonts available, Comic Sans is the most readable.
    Barb

  • Text Wrap Feature Suddenly Disappeared

    I've been using InDesign for years and years. I currently have CS5. Suddenly, the text wrap feature was completely missing from InDesign. This feature was always something that I used almost on a daily basis- suddenly it jsut disappeared! I tried several things to make it come back, including the simple keyboard shortcut, but nothing worked. I talked to someone with Adobe and after they gave me several things to do in InDesign which didn't help bring the feature back, they said that they think that the text wrap feature's file must have gotten damaged somehow and I should uninstall and reinstall indesign. This is on my work computer and my company bought me the creative suite years ago, and i'm not sure where all the license info and all that is.
    So my question is, does anyone else know a solution to this problem? Or do you think my best bet is to just uninstall and reinstall it? And will i have any issues doing this, since I don't have any of the serial numbers or anything from the original purchase? Thanks SO much for your help!

    They had me delete the english preferences file (it's explained in the link that Salah Fadlabi provided in the first post.) I'll try to create a new user on the computer real fast. This is for my work computer (I use InDesign almost every day to create marketing materials) and I'm leaving work in 40 minutes. I'll try to do this real fast and then report back here. Thanks for your help

  • Text wrap option not working..

    Lately I have not been able to use the Text Wrap function in CS3. I feel like it's worked up until recently, but now when I open the Text Wrap window there are no options listed - it's just a blank gray box. When I click on the dropdown menu on the top right, the only two grayed-out options are "Show Options" and "Apply to Master Page Only".
    I tried selecting an object first to create the text wrap, selecting the text box, rearranging the objects, but nothing appears.
    Any idea why this might be happening or what I am doing wrong?

    trash you preferences:
    http://forums.adobe.com/thread/526990

  • InDesign CS6 Text Wrap increments not accurate.

    My work jumped from CS4 to CS6 so I don't know if CS5 had the same issue. Anyway. Text wrap (around bounding box) seem to now be very limited. For example, If I have, say a .25 text wrap on the bottom of a object, but I need to change it slightly to .245 the text does not move. The box shows the change, but the text below just doesn't follow suit. CS4 I was able to make tiny incremental changes to the wrap, but it is not working for me now in CS6. Any ideas, answers?

    Suggest you post product specific questions in the relevant product forum.
    Try posting at http://forums.adobe.com/community/indesign/indesign_general

  • Text wrap with EPS graphic files

    I'm using ID CS3 v5 with Mac OS Leopard 10.5.6.
    I am trying to use the TEXTWRAP panel with an EPS graphic that has been imported into the text.
    When I select the graphic and go to the text wrap panel none of the options are available to me - if I hover the cursor over any of the 5 options it changes to a NO ENTRY sign.
    Does anyone know what I am doing wrong?

    I too am trying to get various InLine (graphic) objects…
    -- to flow with text (got it!), AND
    -- have surrounding text wrap around them as they move (no luck so far).
    It seems like this should be easy, but I too have failed to be able to figure it out.
    I do know that objects that are NOT inline can easily have text flow around them, but I'm sure hoping that InLine objects can too.
    Can anyone tell me (us) if InDesign can do what I'm/we're asking, and if so, HOW?
    I'm using ID CS4 on a G5 iMac running Tiger.
    Thanks in advance for any replies!
    Edly

Maybe you are looking for

  • SQL Exception in Crystal Reports

    When i am trying to connect through the JDBC connection from the File -> Log On or Off Server ,i am getting this error SQL Exception:[SQL State]null:[Error Message] java.io.IOException:Failed to load Please help me out with this

  • 970a-g46 am3+ cable connection questions

    Hi all, I'm a first time computer builder and am in the process of building my own rig. I have MSI AMD 970a-g46 am3+ mobo and cool master elite 431 case. 1) I can't seem to find where on the mobo to connect the speaker for the post beep test. I've tr

  • How do I suspend my billing &/or talk to a live person?

    I transferred my phone number to Google since I can't get Verizon signal at my new job.  Now I cannot disconnect my Verizon account. I was on hold for 15 minutes last night, talked to a rep for 30 minutes, but after being placed on hold for the 4th t

  • How can i select decimal values only

    Hi, I have values in my column : 1234 123345 1233.0 4546.01 how i select decimal values only (1233.0,4546.01) Regards Faheem

  • "git commit --amend" in  SQLDeveloper

    I prefer Git as  version control system. I have some changes in my project. Can i do  replace last commit in current brach in SQLDeveloper? In a command line i can do that  as "git commit --amend". In the NetBeans IDE  i'm  usinsg the checkbox named