Dyld: shared cached file is corrupt: /var/db/dyld/dyld_shared_cache_ppc

My Leopard is an upgrade from Tiger. I created a new Droplet and discovered that the error message in the title of this post was produced each time the Droplet was called. There was no failure at the GUI level. Weird, since I have an Intel based Mac not a PowerPC (ppc suffix in message). Also, I found that dyldshared_cacheppc did not exist in the dyld directory. The following Terminal command fixed the problem:
updatedyld_sharedcache -force
I hope this post saves time for others.

Not only did you save me time, you saved my sanity. I've been on the brink of being institutionalized for weeks having tried a million other solutions to no avail. This worked magically. Can't thank you enough!!!!

Similar Messages

Dyld: shared cached file was build against a different libSystem.dylib?

Hi
i have a strange error when i open terminal or the console:
dyld: shared cached file was build against a different libSystem.dylib, ignoring cache.
so i know how to repair this so i did:
sudo update_dyld_shared_cache -force
And when i did that, i get some strange warning :
warning, could not bind /System/Library/QuickTime/QuickTimeMPEG4.component/Contents/MacOS/QuickTimeMPEG 4 because realpath() failed on
/System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
update_dyld_shared_cache[1255] current cache file is invalid because it contains a different set of dylibs
update_dyld_shared_cache failed: could not resolve _CGSAcceleratorForDisplayAlias expected in /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services in /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents
And this message still comes up! :
dyld: shared cached file was build against a different libSystem.dylib, ignoring cache.
It's realy annoying, please help?!

We have been suffering this too. Fortunatly, finally, we figure out how to clear the share cache via Safe Boot now. Sharing with everybody:
-Shut down your Mac.
-Start your Mac, and keep pressing Shift key when the start music begins.
-When Apple logo comes, the spinning ball appears, you can leave the Shift key.
-Your certain OS open, and your caches will be cleaned.
-Then Restart your certain OS.
Now, congratulations, you will never see the warning message in your Terminal or Console.
Hope this helpful.
Love
XPGtester

Terminal shared cache different libSystem.dylib

When Terminal.app stated, now getting following message. Is it serious?
dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
How do I clear it - What cache and where is it?
Snow installed from scratch, clean, fresh. Been adding other vendors.

From http://discussions.apple.com/thread.jspa?threadID=1260029
try this:
*sudo updatedyld_sharedcache -force*
BTW, Terminal queries are best handled at the Unix forum under OS X Technologies.

Corrupt cache files keep affecting keychain?

When I launched Mail a few days ago, for some reason it wouldn't see my keychain and kept asking me to enter a password. This worked unless I checked 'add to keychain' to which I was told it couldn't find it (it was still there I looked). Thought it might be a permission issue but after checking the keychain itself, and repairing them anyway, there was no change. I ran 'Keychain Access' which showed no keychain at all, and when I ran 'Keychain repair' it could only rename the keychain and then terminate itself without repairing. It's not just Mail that can't access it of course, Safari's autofill no longer worked either. Eventually I cleaned the cache files and after a reboot all was fine again.
Now today it's happened again. What's strange is after deleting the cache files my menu bar has changed - I now have the Input Menu from the International tab of system preferences showing there, which has always been unchecked. Surely that's a preference choice and shouldn't be affected by the caches? Anyway, it seems like a cache keeps getting corrupted and is somehow affecting the way the keychain gets accessed. Can anybody shed some light on what might be happening?
iMac G4 800 SuperDrive 512mb Mac OS X (10.4.3) Lacie 250gb, Canon Pixma IP3000, Linksys wifi Router
iMac G4 800 SuperDrive 512mb Mac OS X (10.4.3) Lacie 250gb, Canon Pixma IP3000, Linksys wifi router
iMac G4 800 SuperDrive 512mb Mac OS X (10.4.3) Lacie 250gb, Canon Pixma IP3000, Linksys wifi router

It's not just my user this happens to - it's every user on my machine. Cleaning the system cache files solves the problem everytime, but every day I have to go through the same thing. Once the cache has been cleaned that day, I can reboot, shutdown and leave it a while, do whatever I need to do, and when I start up again and check my mail everything's fine and works as expected. Safari gets run as does Mail of course, but not much else at the moment. I have a few things that run in the background: little snitch, macaroni, usb overdrive, all are the latest versions and are Tiger compatible, and in any case, if they were interfering somehow it would surely show up each time I rebooted.
Come the end of the day I shut down the computer and the next morning I start it up again. I launch Mail and sure enough the keychain can't be accessed, a new one can't be created, nothing shows up in keychain utility, no autofill in Safari - nothing, until I clean the system cache files again. In anycase, I thought the system cache files were purged on a reboot anyway? Yet if I reboot without cleaning the caches I still have the same issues.
Yesterday I reinstalled the operating system and all the updates - today I launched the computer, launched Mail and....exactly the same thing. Please could somebody suggest how I might resolve this?

BerkeleyDB shared cache

Hello,
I'm using BerkelyDB 4.7.25 (via the BerkeleyDB Perl module) on a FreeBSD system in a forking daemon, with a shared cache environment. Could someone, looking at the output below, tell me whether these statistics are good for the cache? You'd think that "Requested pages found in the cache (99%)" looks good, but I see no shared memory segments being used of any kind; or how much shared memory is being used, or if, even.
Thanks,
- Mark
{root} % /usr/local/bin/db_stat -m -h /var/db/smtpd/
20MB 1KB 752B Total cache size
1 Number of caches
1 Maximum number of caches
20MB 8KB Pool individual cache size
0 Maximum memory-mapped file size
0 Maximum open file descriptors
0 Maximum sequential buffer writes
0 Sleep after writing maximum sequential buffers
0 Requested pages mapped into the process' address space
231751 Requested pages found in the cache (99%)
410 Requested pages not found in the cache
1 Pages created in the cache
410 Pages read into the cache
3430 Pages written from the cache to the backing file
0 Clean pages forced from the cache
0 Dirty pages forced from the cache
0 Dirty pages written by trickle-sync thread
411 Current total page count
411 Current clean page count
0 Current dirty page count
2053 Number of hash buckets used for page location
232572 Total number of times hash chains searched for a page
2 The longest hash chain searched for a page
248006 Total number of hash chain entries checked for page
0 The number of hash bucket locks that required waiting (0%)
0 The maximum number of times any hash bucket lock was waited for (0%)
0 The number of region locks that required waiting (0%)
0 The number of buffers frozen
0 The number of buffers thawed
0 The number of frozen buffers freed
483 The number of page allocations
0 The number of hash buckets examined during allocations
0 The maximum number of hash buckets examined for an allocation
0 The number of pages examined during allocations
0 The max number of pages examined for an allocation
0 Threads waited on page I/O

Hi Mark,
Even if I'm not sure I can help you with everything (especially with Perl configuration) I didn't want for your post to remain unanswered.
liarafan wrote:
Could someone, looking at the output below, tell me whether these statistics are good for the cache?Your statistics are looking like the ones every Berkeley DB user dreams on. I'm not sure how your application scenario looks like (maybe you can tell us more) and what amount of data you use for the test (numebr of records, key/data size), compared to the size of cache, but the statistics are looking great. Is the cache size corresponding to the size of a normal working data set?
liarafan wrote:
I see no shared memory segments being used of any kind; or how much shared memory is being used, or if, even.Each of the BDB subsystems within an database environment is described by one or more regions ( http://www.oracle.com/technology/documentation/berkeley-db/db/ref/env/region.html ). The regions contain all of the per-process and per-thread shared information, including mutexes, that comprise a Berkeley DB environment. For example, one of the shared memory segments will be the transactional information for the system, and one (or more) of them will be the cache. What Berkeley DB product/flags are you using?
Please let me know if this helped and if you have other questions.
Thanks,
Bogdan

Libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file

While updating, I got:
[2013-05-05 19:31] [PACMAN] upgraded cups-filters (1.0.34-2 -> 1.0.34-3)
[2013-05-05 19:31] [ALPM-SCRIPTLET] gtk-update-icon-cache: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:31] [PACMAN] upgraded dia (0.97.2-4 -> 0.97.2-5)
[2013-05-05 19:32] [ALPM-SCRIPTLET] gtk-update-icon-cache: error while loading shared libraries: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded firefox (20.0.1-2 -> 20.0.1-4)
[2013-05-05 19:32] [PACMAN] upgraded gcc-multilib (4.8.0-3 -> 4.8.0-4)
[2013-05-05 19:32] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
[2013-05-05 19:32] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded gdk-pixbuf2 (2.28.1-1 -> 2.28.1-2)
[2013-05-05 19:32] [PACMAN] upgraded gegl (0.2.0-7 -> 0.2.0-8)
[2013-05-05 19:32] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
[2013-05-05 19:32] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
[2013-05-05 19:32] [PACMAN] upgraded libwmf (0.2.8.4-9 -> 0.2.8.4-10)
I opened the /var/lib/pacman/local/*/files of the mentioned packages and ran the mentioned commands with sudo. Today I got the following error while starting Wireshark (and gnuplot):
(gnuplot:8581): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
Segmentation fault (core dumped)
(wireshark:8440): GdkPixbuf-WARNING **: Error loading XPM image loader: Image type 'xpm' is not supported
ERROR:stock_icons.c:229:stock_icons_init: assertion failed: (pixbuf)
Aborted (core dumped)
It turns out that /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders.cache was created with permissions 640 (due to my umask). The solution was to chmod 644 it.
(similarly, gtk-update-icon-cache created /usr/share/icons/hicolor/icon-theme.cache with wrong permissions (640). This did not seem to cause issues though.)
Hopefully it will be of help to someone.
Last edited by Lekensteyn (2013-05-06 14:57:47)

I also got into problems after a pacman -Syu today.
I believe removing cleartype-cairo and installing cairo instead fixed the problem
Hope this helps.
As a reference, here are some troubleshooting steps I did:
sudo pacman -S gdk-pixbuf2
warning: gdk-pixbuf2-2.28.1-2 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Packages (1): gdk-pixbuf2-2.28.1-2
Total Installed Size: 3.67 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [###################################################################################] 100%
(1/1) checking package integrity [###################################################################################] 100%
(1/1) loading package files [###################################################################################] 100%
(1/1) checking for file conflicts [###################################################################################] 100%
(1/1) checking available disk space [###################################################################################] 100%
(1/1) reinstalling gdk-pixbuf2 [###################################################################################] 100%
g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
$ pkgfile /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so
extra/librsvg
$ yaourt -Sb librsvg
CCLD rsvg-view-3
/usr/bin/ld: warning: libpng15.so.15, needed by /usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.0/../../../../lib/libcairo.so, not found (try using -rpath or -rpath-link)
$ pkgfile libcairo.so
extra/cairo
multilib/lib32-cairo
[nemo@ilnwadz ~]$ sudo pacman -S cairo
resolving dependencies...
looking for inter-conflicts...
:: cairo and cairo-cleartype are in conflict. Remove cairo-cleartype? [y/N] ^C
Interrupt signal received

How can I share cache files between users in a sandboxed Mac app?

Our app downloads media files and stores them for use later. The size can be up to a few GB so it's considerable. Because this can be so large I want the cache to be shared across different users. My understanding of sandboxing is that you cannot write outside of the ~/Library/Containers/<your app id>... directory, thus there will be one copy per user.
I get an access denied error when trying these folders (not surprising but I tried it anyway):
/Users/Shared/...
/Library/Application Support/...
Does anybody know of a way I can have a sandboxed application with some kind of user agnostic cache storage?

It's not worth the trouble. There are very few multi-user Macs out there. The only way to accomplish this in the sandbox would be a shared cache location that a sure would setup in preferences and store with a security-scoped bookmark. Each user would have to set the same option to use the shared cache location.

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

Windows 7 64-bit Copying files to external usb drive - files becomes corrupted.

Hi All,
I am getting intermittent problem with regards to copying files to usb external hard drive from my laptop.
When file is copied to external drive, the file becomes corrupt from the external drive.
I have to repeat around 2 to 3 times or more to re-copy the file again until file is not corrupted.
Appreciate of any help.
Below is my system info:
Using Win 7 Ultimate 64-bit 4 gb of ram.
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name GIBBY-LAPTOP
System Manufacturer Sony Corporation
System Model VGN-SR26GN_B
System Type x64-based PC
Processor Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, 2267 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. R1130Y1, 8/28/2009
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name Gibby-Laptop\Gibby
Time Zone Malay Peninsula Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.97 GB
Available Physical Memory 2.60 GB
Total Virtual Memory 7.93 GB
Available Virtual Memory 6.05 GB
Page File Space 3.97 GB
Page File C:\pagefile.sys

Ok, lets be brief.
This problem is annoying me for years. It is totally reproducible although random. It happens when copying to external drives (mainly USB) when they are configured for "safe removal". I have had issues copying to NTFS and FAT32 partitions. I have
had issues using 4 different computers, from 7 years old to brand new ones, using AMD or intel chipsets and totally different USB controllers, and using many different USB sticks, hard disks, etc. The only common thing in those computers is Windows 7 x64 and
the external drives optimization for "safe removal". Installing Teracopy reduces the chances of data corrpution, but does not eliminate them completely. The only real workaround (tested for 2 years) is activating the write cache in the device manager
properties of the drive. In that way, windows uses the same transfer mechanisms as for the internal drives, and everything is OK.
MICROSOFT guys, there is a BIG BUG in windows 7 x64 external drives data transfer mechanism. There is a bug in the cache handling mechanism of the safe removal function. Nobody hears, I've been years talking about this in forums. It is a very dangerous bug
because it is silent, and many non professional people is experiencing random errors in their backup data. PLEASE, INVESTIGATE THIS. YOU NEED TO FIX SUCH IMPORTANT BUG. IT IS UNBELIEVABLE THAT IT IS STILL THERE SINCE 2009!!!
Hope this helps.

PDF file gets corrupted when generated from BSP

Hi,
     I am generating a PDF file from a BSP page ( see the code below). The problem is that PDF file gets corrupted and I am unable to open it. I also tried to use other functions like GUI_Download and DOwnload as suggested by many and they also do not work either. Has any one generated a PDF from BSP and can some one help?
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
         VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING DESTINATION           = 'LOCL'
           COPIES                = COUNT
           LIST_NAME             = 'TEST'
           LIST_TEXT             = 'Test NEW-PAGE PRINT ON'
              IMMEDIATELY           = ''
              RELEASE               = 'X'
              NEW_LIST_ID           = 'X'
           EXPIRATION            = DAYS
              LINE_SIZE             = 140
           LINE_COUNT            = 23
           LAYOUT                = 'X_PAPER'
           SAP_COVER_PAGE        = 'X'
           RECEIVER              = 'SAP*'
           DEPARTMENT            = 'System'
              NO_DIALOG             = 'X'
    IMPORTING OUT_PARAMETERS        = PARAMS
              VALID                 = VALID.
IF VALID <> SPACE.
    NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Message1'.
write :/ 'Hello Message2 '.
NEW-PAGE PRINT OFF .
ENDIF.
data :        spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
DATA: itab TYPE TLINE,
        witab TYPE TABLE OF TLINE,
        output TYPE STRING,
        outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA:    cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = spool_no
      NO_DIALOG                = 'X'
   IMPORTING
      PDF_BYTECOUNT            = mi_bytecount
    TABLES
      PDF                      = witab
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 8
      ERR_BTCJOB_SUBMIT_FAILED = 9
      ERR_BTCJOB_CLOSE_FAILED = 10
      others                   = 11.
if sy-subrc EQ 0.
    LOOP AT witab INTO itab.
      CONCATENATE
        output
        itab-tdline
      INTO output in character mode.
    ENDLOOP.
endif.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
        EXPORTING
            text   = output
            mimetype =   'APPLICATION/PDF'
        IMPORTING
            buffer = outputx.
concatenate cl_abap_char_utilities=>byte_order_mark_little
outputx
into outputx in byte mode.
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF; charset=utf-16le' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
response->set_header_field( name = 'content-disposition'
                              value = 'attachment; filename = TEST.PDF'
l_PDF_len = xstrlen( OUTPUTX ).
response->set_data( data = OUTPUTx
                      length = l_PDF_len ).
navigation->response_complete( ).
Regards
Amit Agrawal

HI Craig Cmehil,
               I have tried this code as well as given in the URL specified by you. But using this also browser shows the following content. It seems that PDF content is corrupted.
My Output as shown on Browser Starts below this line----
DF-1.3
%âãÏÓ
2 0 obj
/WinAnsiEncoding
endobj
3 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Courier
/Name /F001
/Encodg 2 0 R
>>
endobj
4 0 obj
<<
/Length 5 0 R
>>
stream
/F001 7.30 Tf 0 0 0.753 rg BT 18.00 570.65 Td 0 Tw <33302E30362E3230302020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 2950 570.65 Td 0 Tw
<20204854545020436F6E74726F6C202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020>Tj ET 0 0 0.753 rg BT 572.40 570.65 Td 0 Tw <2020202020202020202020202031>Tj ET q 0 0 0 RG 0.55 w 18.00 562.90 m
634. 562.90 l S Q 0 0 0.753 rg BT 18.00 551.45 Td 0 Tw <48656C6C6F20416D6974>Tj ET 0 0 0.753 rg BT 18.00 541.85 Td 0 Tw <48656C6C6F204765726176>Tj ET
endstream
endobj
5 0 obj
624
endobj
6 0 obj
<<
/Type /Page
/MediaBox
/Parent 1 0 R
/Resource
<<
/ProcSet
/PDF /Text
/Font
<<
/F001 3 0 R
>>
/XObject
<<
>>
>>
/Contents 4 0 R
>>
endobj
7 0 obj
<<
/Author (AMG )
/CreationDate (20050630 181301)
/Creator (Form X_58_170 EN)
/Producer (SAP R/3 Release 620 )
%SAPinfoStart TOA_DARA
%FUNCTI=(    )
%MANDANT=(   )
%DEL_DATE=(00000000)
%SAP_OBJECT=(          )
%AR_OBJECT=(          )
%OBJECT_ID=(                          )
%FORM_ID=(                                        )
%FORMARCHIV=( )
%RESERVE=(   )
%NOTIZ=(                                                                )
%SAPinfoEnd TOA_DARA
>>
endobj
1 0 obj
<<
/Type /Pages
/Kids
[ 6 0 R
/Count 1
>>
endobj
8 0 obj<<
/Type /Catalog
/Pages 1 0 R
/PageMode /UseNone
>>
endobj
xref
0 9
0000000000 65535 f
0000001801 00000 n
0000000017 0000n
0000000052 00000 n
0000000157 00000 n
0000000840 00000 n
0000000862 00000 n
0000001048 00000 n
0000001869 00000 n
trailer
/Size 9
/Root 8 0 R
/Info 7 0 R
>>
startxref
1944
%%EOF
Browser Displey Content Ends----
My Coding Starts----
Data: GG type String.
event handler for data retrieval
data : event type ref to cl_htmlb_event.
class cl_htmlb_manager definition load.
class CL_HTTP_RESPONSE DEFINITION LOAD.
DATA : PARAMS TYPE PRI_PARAMS,
         VALID TYPE C,
GV_SUCCESS_SPOOL_NO LIKE SY-SPONO.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING DESTINATION           = 'LOCL'
           COPIES                = COUNT
           LIST_NAME             = 'TEST'
           LIST_TEXT             = 'Test NEW-PAGE PRINT ON'
              IMMEDIATELY           = ''
              RELEASE               = 'X'
              NEW_LIST_ID           = 'X'
           EXPIRATION            = DAYS
              LINE_SIZE             = 140
           LINE_COUNT            = 23
           LAYOUT                = 'X_PAPER'
           SAP_COVER_PAGE        = 'X'
           RECEIVER              = 'SAP*'
           DEPARTMENT            = 'System'
              NO_DIALOG             = 'X'
    IMPORTING OUT_PARAMETERS        = PARAMS
              VALID                 = VALID.
IF VALID <> SPACE.
    NEW-PAGE PRINT ON PARAMETERS PARAMS NO DIALOG.
write :/ 'Hello Amit'.
write :/ 'Hello Gaurav '.
NEW-PAGE PRINT OFF .
ENDIF.
GV_SUCCESS_SPOOL_NO = sy-spono.
data :        spool_no TYPE TSP01-RQIDENT .
spool_no = sy-spono.
write: GV_SUCCESS_SPOOL_NO.
*write: spool_no.
IF display_type = 'convertspool'.
DATA: itab TYPE TLINE,
        witab TYPE TABLE OF TLINE,
        output TYPE STRING,
        outputx TYPE XSTRING.
data : l_pdf_len type i.
data: mi_bytecount type i.
DATA : APP_TYPE TYPE STRING VALUE 'APPLICATION/PDF' .
DATA:    cached_response TYPE ref to if_HTTP_RESPONSE.
data : l_display_url type string .
data : guid type GUID_32 .
       spool_no like TSP01-RQIDENT .
*spool_no = GV_SUCCESS_SPOOL_NO .
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = spool_no
      NO_DIALOG                = 'X'
   IMPORTING
      PDF_BYTECOUNT            = mi_bytecount
    TABLES
      PDF                      = witab
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 8
      ERR_BTCJOB_SUBMIT_FAILED = 9
      ERR_BTCJOB_CLOSE_FAILED = 10
      others                   = 11.
if sy-subrc EQ 0.
    LOOP AT witab INTO itab.
      CONCATENATE
        output
        itab-tdline
      INTO output in character mode.
    ENDLOOP.
endif.
*write : output.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
        EXPORTING
            text   = output
            mimetype =   'APPLICATION/PDF'
        IMPORTING
            buffer = outputx.
*concatenate cl_abap_char_utilities=>byte_order_mark_little
*outputx
*into outputx in byte mode.
CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
some Browsers have caching problems when loading Excel Format
response->set_header_field( name = 'content-type' value =
'APPLICATION/PDF' ).
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name = if_http_header_fields=>expires
response->delete_header_field( name = if_http_header_fields=>pragma )
    l_pdf_len = xstrlen( outputx ).
    cached_response->set_data( data   = outputx
                        length = l_pdf_len ).
    cached_response->set_header_field( name = if_http_header_fields=>content_type
                                       value = 'application/pdf' ).
    cached_response->set_status( code = 200 reason = 'OK' ).
    cached_response->server_cache_expire_rel( expires_rel = 180 ).
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_32 = guid.
    CONCATENATE runtime->application_url '/' guid '.pdf' INTO l_display_url.
    cl_http_server=>server_cache_upload( url      = l_display_url
                                         response = cached_response ).
RETURN.
My Coding Ends----
Any Further help on this.
Regards
Amit Agrawal

Is "Process scoped identity" the same thing as TopLink shared cache?

Bumped into this thread on my investigation of ORM solutions:
http://forum.hibernate.org/viewtopic.php?t=939623&highlight=toplink
What I would like to know is whether "Process scoped identity" as Gavin King puts it, is the same as TopLink shared cache and if so, whether this could cause deadlocks?
Quote:
    All the docs for Hibernate assume that you are working in a multi-user system,
    where process scoped identity is an absolute no-no - you would require
    synchronization on entity instances, which is guaranteed to result in deadlocks,
    since there is no possible "natural" order in which to obtain locks.

Yes, process scoped identity is basically what TopLink's shared server session cache is offering. Having shared instances is a huge benefit for performance and is most noticeable with read-only and read-mostly data types shared across users.
Yes, we do need to have locking to ensure that changes are safely written into the shared instance and that transactionally isolated (UnitOfWork) copies are safely made in a row consistent fashion. Although I cannot comment on Hibernate's implementation I assume that whatever object type they use in their shared (L2) cache offers the same concurrency protection to ensure that users get consistent data and that concurrent writes do not corrupt the cached object structure.
I guess the only real difference is the object type cached. TopLink cached your business object and Hibernate caches a custom object representing the state of you object. Both need to ensure proper locking for concurrency protection but TopLink does not need to rebuild an instance for each client session unless wanted/needed.
Doug

How To Manage Premiere Cache Files On A Central Storage Server with Multiple editors

Look for the proper recommended setup in a shared storage environment with multiple editors. Where do cache files reside on each editor locally or on the shared storage.
This is in a Windows 7 Environment using EMC2 Isilon for our shared storage. We are running Premier Pro CC 2014 8.1 Caravan Build 8.2.0(65)
Thanks
Rodney

Look for the proper recommended setup in a shared storage environment with multiple editors. Where do cache files reside on each editor locally or on the shared storage.
This is in a Windows 7 Environment using EMC2 Isilon for our shared storage. We are running Premier Pro CC 2014 8.1 Caravan Build 8.2.0(65)
Thanks
Rodney

SOA 11.1.1.5 install got can't write cache file

Hi,
I installed 2 node cluster of SOA 11.1.1.5 on linux and during domain configuration I got errors i.e.
**sys-package-mgr: can't write cache file for**
Installation was done and all the servers start/stop fine am able to deploy the processes, am able to access all the urls fine everything coming up fine BAM, SOA, OSB etc . Just wondering if the error above have any effect on the installation or any piece that might not work. As I have already did the installation and ignored those errors above so just wanted to see if anything I need to look for.
Thanks

Hi,
It's a cluster install and took sometime to do the full install so it will be a pain to re-install everything over. Currently have tested the processes and seems to be working fine.
Also I don't find
/var/tmp/wlstTemp
I do see wlstTemp appended with linux users who did Oracle SOA install.
Also in-future when creating a new environment besides the above chmod 777 on /var/tmp/wlstTemp is there any parameter we can supply when running config.sh. I read some where that in-order to get by these errors at the time of domain creation we can also pass some parameter.
Thanks

How to config a shared cache for multiple environments with C API

How to config a shared cache for multiple environments with C API? Just like Java edition. Chapter 2. Database Environments
I want to open large number of databases, at least 10,000. But as the counts of databases opened increase, the db->open operation become very slow. It almost cost 2 hours to 10,000 databases.
So I try to distribute these databases to multiple environments ( for example, 5 envs ). And in order to improve the efficient of memory use, I want to share cache between envs.

Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB.

Dyld: shared cached file is corrupt: /var/db/dyld/dyld_shared_cache_ppc

Similar Messages

Maybe you are looking for