Dynamic Assignment

Hi all,
I have created a BPEL process, using User Task Activity, via Sequential Workflow Pattern.
I have used the wizard as desired and at assignment policy i have chosen to use "dynamic assignment using xpath expression". Although this seems like dynamic assignment it pushes me to choose even if the assignees will be users or groups. What I need here is to assign task to both users and groups together a mixture of both. when i look from BPEL process manager Audit Tab I should be observing (element of <RoutingVar1>)
<approvers>groups("Aaa"),user("Mmm"),users("bbb")</approvers>
how can manipulate "setRoutingPolicy" Assign activity.
I am a new bee with XPath expression.
Thanks for all.

Your question is a bit difficult to understand. Please elaborate.

Similar Messages

Dynamically assign value to a column in ALV LIST Display

Hi all,
How can I dynamically assign value to a column in ALV LIST Display without using classes and methods?
Thanks,
Ridhima

Hi Vikranth,
I am displaying one ALV list say with columns A and B.
I have value in A but not in B. Now at runtime user selects one row, clicks on push button in application toolbar, then i have to display value in column B in the already displayed list.
I searched and came to know it can be done with oops concept. but i am not using classes and methods.
so how can i do this?
Thanks,
Ridhima.

In human task, dynamically assign group doesn't work

Oracle SOA 11.1.1.4
My bpel process invokes a human task.
On the human task Assignment tab, I assigned 3 users (by name), 1 group (by expression).
The group is configured in LDAP
When I tested the bpel process, I entered the group and other data required.
From the worklist app, I see the task listed. It is assigned to the 3 users, but not the dynamically passed-in group.
From the Audit trail, I saw all data I entered (include the group). Everything seems correct, but I still can’t make the dynamically-pass-group work.
If I assign the group by name in human task, it works fine.
The problem is: dynamically assign group doesn't work.
Please kindly advice.

Yes, it is possible assign a group as participant of some human task, passing the group name as parameter.
I have tested just now.
It works pretty well in SOA 11.1.1.4 (BPEL or BPM).
Make sure add a data parameter in your human task definition and pass a valid group name to it.
At the Assignment tab, in the participants' list, add a group, data type by expression, and set the value to the right xpath expression to the corresponding parameter.
For example: /task:task/task:payload/task:group
If it is not working look the SOA log files, probably you'll find some information about the error there. Maybe there is some problem with your jazn.com configuration.
You can also test if there is something wrong related to the group name, trying to transfer some task to the same group by the worklist.

How to dynamically assign Display Pattern using FormCalc in Adobe PDF Form

I am using Adobe PDF Form Designer. I am trying to dynamically assign a display pattern like MM/DD/YYYY to the Field tab - Display Pattern property. May I know how to do that?
I am using FormCalc scripting.

hi,
After placing the date field in layout from data view, u will get tabs like field,layout,border etc..
In field tab under the edit pattern specify the pattern in which you want to display the date field.
hope this works.
Reward points if helpful.

Dynamically assigning field name and field value

Hi all,
logic:
select field1 field2 from table into workarea.
workarea-field1 will have value as 'MATNR' or 'BUKRS' or 'KUNNR' or............etc
workarea-field1 will have values as '10000025' or '2010' or '102536' or ............etc
Now i need to dynamically assign MATNR = 10000025
or BUKRS =2010
or KUNNR = 102536
HOW CAN WE DO THIS.

Hi,
Use the ASSIGN COMPONENT statement.
Regards,
Ankur Parab

Regarding dynamically assigning the where clause to select query

hi,
Please send the code regarding how to dynamically assign the where clause to select query.
thanks in advance

SELECT <fileds>
        INTO TABLE itab
        FROM dbase
        WHERE condition.

Dynamically assigning digital signature strategy

Hi Experts,
I have a requirement where I need to dynamically assign different signature strategy to document approval based on the number of approvers.
In our case for the same document based on the level of changes number of approvers might be different ( 3 - 12). We are planning to achive this by allowing document owners to select the approver using a approval workflow
I also know that there is a limition of 8 approver slots on the default signature strategy.
Please advise what is the best strategy in this case.
Thank You
Regi

Hi,
You can refer Note 700495 for digital signatures.
Thank You,
Manoj

Dynamic assign in field symbols

dynamic assign in field symbols

Hi,
DYNAMIC ASSIGN:
If you do not know the name of the field that you want to assign to the field symbol when you write a program, you can use a dynamic ASSIGN statement:
ASSIGN (<f>) TO <FS>.
This statement assigns the field whose name is contained in the field <f> to the field symbol <FS>. You cannot use offset and length in a dynamic ASSIGN.
At runtime, the system searches for the corresponding data object in the following order:
If the ASSIGN statement is in a procedure, the system searches first in its local data.
If it cannot find the object in the local data (or if the ASSIGN statement is not in a procedure), it then looks in the local data of the program.
If the field does not exist in the global data of the program, the system looks in the table work areas declared with the TABLES statement in the main program of the current program group. A program group consists of a main program and all of the programs that are loaded into the same internal session as a result of other program calls.
If the search is successful and a field can be assigned to the field symbol, SY-SUBRC is set to 0. Otherwise, it is set to 4, and the field symbol remains unchanged. For security reasons, you should always check the value of SY-SUBRC after a dynamic ASSIGN to prevent the field symbol pointing to the wrong area.
Searching for the field in this way slows down the program. You should therefore only use the dynamic ASSIGN statement when absolutely necessary. If you know when you create the program that you want to assign a table work area to the field symbol, you can also use the following variant of the dynamic ASSIGN statement:
ASSIGN TABLE FIELD (<f>) TO <FS>.
The system then only searches within the table work areas in the main program of the current program group for the data object that is to be assigned to the field symbol. This addition is forbidden in ABAP Objects, since the latter does not support table work areas.
Suppose we have three programs. The main program:
REPORT demo_field_symbols_dynami_as_1.
TABLES sbook.
sbook-fldate = sy-datum.
PERFORM form1 IN PROGRAM demo_form1.
The other two programs are:
REPORT demo_form1.
FORM form1.
PERFORM form2 IN PROGRAM demo_form2.
ENDFORM.
and
REPORT demo_form2.
FORM form2.
DATA name(20) TYPE c VALUE 'SBOOK-FLDATE'.
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN (name) TO <fs>.
IF sy-subrc EQ 0.
    WRITE / <fs>.
ENDIF.
ENDFORM.
The output looks something like this:
02.06.1998
The program group in the internal session now consists of the programs DEMO, MYFORMS1 and MYFORMS2. The field symbol <FS> is defined in MYFORMS2. After the dynamic ASSIGN statement, it points to the component FLDATE of the table work area SBOOK declared in the main program DEMO.
REPORT demo_field_symbols_dynami_as_2 .
TABLES sbook.
DATA: name1(20) TYPE c VALUE 'SBOOK-FLDATE',
      name2(20) TYPE c VALUE 'NAME1'.
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN TABLE FIELD (name1) TO <fs>.
WRITE: / 'SY-SUBRC:', sy-subrc.
ASSIGN TABLE FIELD (name2) TO <fs>.
WRITE: / 'SY-SUBRC:', sy-subrc.
The output is:
SY-SUBRC:      0
SY-SUBRC:      4
In the first ASSIGN statement, the system finds the component FLDATE of the table work area SBOOK and SY-SUBRC is set to 0. In the second ASSIGN statement, the system does not find the field NAME1 because it is declared by the DATA statement and not by the TABLES statement. In this case, SY-SUBRC is set to 4.
Reference: http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb38d5358411d1829f0000e829fbfe/content.htm
reward points if helpful.
Regards,
Ramya

Error message "ABAP/4 error during dynamic assign" on Contact Log creation.

Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
Ankur

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

GP: Dynamically assignment of users

Hello,
i'm a newbie and i have the following question:
Can i dynamically assign the user of the next step in a guided procedure?
The initiator of my GP passes some data to a web service. The web service determines on the basis of the data the user of the next step in my GP. Is this possible? And how can i achieve this scenario?
Thanks in advance and best regard,
Matthias

Hi Matthias,
Unfortunately, the GP external service callable object only works for RFCs. You cannot use it for a Web Service.
Therefore, I would propose the following solution. You can import a Web Service as an external service in CAF (using the Composite Application Services perspective in the Developer Studio). Then you can use the external service from a CAF application service. The application service can already be exposed as a callable object, and you can take the user ID as an output. Then you can use the predefined callable object Assign Users to Process Role, and map the application service output to its input. To enable the assignment of the relevant user to the next action, you must consolidate the role created for the Assign Users action to the role created for the next action, and set the type of the new role to Runtime Defined. Then, at runtime the Assign Users object is executed in the background and the user is assigned to execute the next action.
You can find how-to guides describing how to import a Web Service in CAF and how to integrate it further into CAF in the https://www.sdn.sap.com/irj/sdn/developerareas/platform?rid=/webcontent/uuid/d8dbd703-0801-0010-c9bf-c04bc52f562f">caf [original link is broken] [original link is broken] (see tutorial N.81).
Hope this helps a bit.
Regards,
Zornitsa

Routing a human task while invalid dynamic assignment

hi,
we hav a confusion while using route process in human task.
In our case when an invalid user is dynamically assigned to BPEL ,an Alert is generated for the jcooper user .As we have set "overrride default exception management" for jcooper user in adavance setting of .task file.
When jcooper user route the task to any other user say jstein,the state of the task of jcooper is completed and also the BPEL process is completed.But in the worklist of jstein no task is shown .
What we think is,BPEL process should not be get completed when jcooper user route the task but it should get complete when jstein act on the task.
Regards,
Ritesh/Nitin

Hi
Try to make the <messageAttribute name="ASSIGNMENT" attributeType="SIMPLE_TYPE"
type="xsd:string" updatable="false"/>
to
<messageAttribute name="ASSIGNMENT" attributeType="SIMPLE_TYPE"
type="xsd:string" updatable="true"/>

How can i dynamically assign values to the tld file

How can i dynamically assign values to the tld file

In the tld you write for the tag handler mention the following sub tags in the attribute
<attribute>
<name>xyz</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
import the packagejavax.servlet.jsp.tagext.DynammicAttributes;
add the method
public void setDynamicAttribute(String rui, String localname, Object value) throws JspException
<Your Required task>
Its better if you SimpleTagSupport class to be extended.

Dynamically assigning variable in xml loop

I am trying to dynamically assign a variable name so I can
build an accordian nav from and XML doc. the code looks like this:
ACnav['depthChild0']._alpha = 0;
ACnav.setStyle("color", 0x0ffffff);
ACnav.setStyle ("openEasing",
mx.transitions.easing.strong.easeout);
ACnav.setStyle ("selectionDuration",
mx.transitions.duration.slow);
navXML = new XML();
navXML.ignoreWhite = true;
navXML.load("menu1.xml");
oY=5;
var currentSection = 0;
function buildNav () {
DisposableXML = new XML();
TempXML = new XML();
button = new Array();
//buttonNum = new Array();
subitem = new Array();
menuItem = new Array();
o = new Array ();
subitemlocation = new Array();
DisposableList = new Array();
buttonList = navXML.firstChild.childNodes;
i = 0;
sectionLength = buttonList.length;
while (i<=buttonList.length) {
if (buttonList
.nodeName.toLowerCase() == "button") {
DisposableXML = buttonList;
DisposableList = DisposableXML.childNodes;
buttonName = buttonList
.attributes.name;
set ("buttonNum", "buttonNumber"+i);
trace(buttonNum);
ii = 0;
//trace(buttonName+"-"+buttonNum);
//ACnav.createChild("View", buttonNum, {label: buttonName,
icon: "mainNav"});
button = ACnav.createChild("View", buttonNum, {label:
buttonName, icon: "mainNav"});
oY=5
while (ii<=DisposableList.length) {
TempXML = DisposableList[ii];
if (DisposableList[ii].nodeName.toLowerCase() == "subitem")
subitem = TempXML.attributes.name;
//subitemlocation = TempXML.attributes.location;
subitemNum="subitemNum"+[ii]+
//trace(buttonNum+"-"+subitemNum+"-"+subitem);
menuItem = ACnav.buttonNum.createChild("subNav",
subitemNum, {childText: subitem});
menuItem
.move(0, oY);
oY=(oY+25);
//trace(buttonNum);
ii = Number(ii)+1;
i = Number(i)+1;
//trace(button);
trace(menuItem);
redraw();
//gotoAndPlay('reload');
The problem lies with this line: button =
ACnav.createChild("View", buttonNum, {label: buttonName, icon:
"mainNav"});
If I quote the "buttonNum", it works, but jumbles the subnav
items together vs in the proper node. I need to have that declared
dynamically so that each parent node has a differentID and then
createchild goes under that. Anyway, I've tried alot of stuff over
the last few days and its getting frustrating.
Thanks for the help if anyone contributes!

You shouldn't need to do a concat within the XQuery path parameter. Try the following:
bpws:getVariableData('inputVariable','payload','/ns1:Request/ns1:instance[bpws:getVariableData("j")]')

ABAP/4 error during dynamic assign beyond program bounds

Hi experts,
after an Upgrade from 4.7 to Ecc 6.0, launching transaction AC03 an error (green light) occours "ABAP/4 error during dynamic assign beyond program bounds".
Is there anyone who find a solution?
regards
andrea brescia
Edited by: andrea brescia on Nov 30, 2010 1:42 PM

Dear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
                            and bldgr = '0110'
                            and mnum = 23
                            and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro

Dynamically assign series names for SVG Chart

I have created a line chart with 5 series in it. I would like the legend name for each series to be dynamically assigned (as a value from a field in the database). Is this possible?
Ideally, i'd also like the number of series to be variable too. Is this possible?

Hi,
I am trying to use the code you gave me above (which normally works fine). But when I put it in the query below with 3 ' (3 quotes) it fails.
Any ideas?
Thanks
Owen
return
'SELECT null link, month label, sumamt "'||:P4_FY||'"
FROM
SELECT
month
, CASE
WHEN MONTH = '''JUN''' THEN 1
WHEN MONTH = '''JUL''' THEN 2
WHEN MONTH = '''AUG''' THEN 3
WHEN MONTH = '''SEP''' THEN 4
WHEN MONTH = '''OCT''' THEN 5
WHEN MONTH = '''NOV''' THEN 6
WHEN MONTH = '''DEC''' THEN 7
WHEN MONTH = '''JAN''' THEN 8
WHEN MONTH = '''FEB''' THEN 9
WHEN MONTH = '''MAR''' THEN 10
WHEN MONTH = '''APR''' THEN 11
WHEN MONTH = '''MAY''' THEN 12
END AS SORT_ORDER
, sumamt
FROM
Select month
, sum(DEAL_VALUE_SUM) sumamt
from my_deals
where country = :P8_COUNTRY
and FY = :P8_FY
group by month))
ORDER BY SORT_ORDER';

Dynamic Assignment

Similar Messages

Maybe you are looking for