Dynamic change in the query name based on user input

Hi Gurus,
In a scenario, country appears as a user input variable.When the user specifies his country, the same query displays <b>Business trends</b>' data pertaining to his own country and rest of the world(international) in two tables.The reports are developed using Web application designer.
Can the name(description) of the query be changed so that the user input value for country gets dynamically reflected in the query name like <b>Business trends:Selected country vs International</b>?
Regards,
Balaji

Hi Bala,
ya this can be done by text variables. create a text variable( replacement path on the country infoobject) by going to the query properties on the description.
if the user enters country value then it will be displaed on the description of the query .
assign points if useful .
regards
santosh

Similar Messages

Dynamic display of the Company Name based on Org

Hello All,
I need to dynamically display the Company name based on the Org_id and the ORG is not being populated in the XML data file. How do i achieve this,please let me know.
Thanks
Rakesh

Rakesh,
It's like getting something from nothing (data template)... If you do not want to modify your report, then Vetri's option will be fine(your going to add not modify)...
Or,. define a new Oracle report based on the seeded one then do modify...
regards,
Rownald

How to configure the schema name dynamically based on user input.

configure the schema name dynamically based on user input.
For ex:
We have two schemas:
Schema1 - base schema having 15 tables.
Schema2 - tables which is specific to modules. Having only 10 tables which is also available in Schema1
Login to application using Schema 1
Access a particlular module and select the country. Here country selection is identified.
Based on the country selection, we need to connect the schema respectively.
If the user selects France --> It should connect Schema1
If the user selects Germeny --> It should connect schema2.
Used: Eclipselink

You may want to have a different persistence unit for each country, then you just need to switch persistence units, and can put the schema in your orm.xml file.
You may also want to investigate EclipseLink multi-tenant support,
http://www.eclipse.org/eclipselink/documentation/2.5/jpa/extensions/a_multitenant.htm
You can the schema in a persistence unit in code using a SessionCustomizer and the tableQualifier.

How to get the query name from portal report name

Hi Experts ,
I am given a portal report Name and asked to do changes to the queries of that ,so how do i get the query name ,
Thanks in Advance
Nitya

Hi Nithya,
You can get the technical name by selecting the role in the portal where the report is enclosed you will generally find the report in description then identify the report you are looking then double click on that you will get a window pop-up in that you will have details tab there click on the details the your Query technical name will be displayed.
EX : zqry_w001 Then replace W with Q and seach in analyser or Designer.
Regards
Amar.

Editing the Query name for all reports in PRD.

Dear All,
I have created 25 reports using Query Designer.We have moved all the reports to BI Production. And Clients are using these reports using the Tool Bex Analyser.
Every time they are navigating through open Query -> Info Areas -> Data targets and Query.
Instead of going this way, is there any other way to Open a query easily.
And they wants to modify the Report name and the Technical name for all the reports. Can we able to edit the Query name for all reports, or do i need to go for SAVE AS for all querys.
Pls Suggest.
Thanks,
Ram

Hi Ram,
1. For the first question; if it user specific query then ask the users to save them at the FAVORITES so that there is no need to go to the dataprovider specific.
Or they can create the reports as favorites user menu screen of that particular user.
2. In order to change the technical name and description of the queries goto RSZC t-code> give the source and target infoprovider as same> select queries>click on the reports>click on transfer selections-->
Then you get a screen to change the description and technical name.
But this is pertained to Infoprovider level.
You can see all the reports on the infoprovider (cube/ods).
Hope you understood.
Regards,
Ravi Kanth

In ST03 , how can i see the Query name, user id,how many times executed the

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,

Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh

In ST03 , how can i see the Query name, user id,how many times .

HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivs

Hi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

How can I get the query name/aggregationslevel in my planning function?

Hi,
is it possiable to get the query name/aggregationslevel in a planning fuction?
thanks for your idea.
hongwei

Hi,
The interface IF_RSPLFA_INFOPROV_DESC
provides methods for retrieving the most important properties of an InfoProvider from the point of view of the implementation class of a planning function type.
Methods GET_T_CHARNM and GET_T_KEYFNM return the names of the characteristics and key figures in the InfoProvider.
You can get the properties of the InfoObjects and compound information by calling method GET_TAB_IOBJ_PRO and GET_TAB_IOBJ_CMP .
Does this help?
Best Regards
Shyam

BW User Exit - Code in function of the query name

Hi,
I would like to create an user exit code which execute a algorithm different in function of the query executed. do you know in which variable is store the technical name of the query.
CASE query
    WHEN 'Z_ZAPO_001'.
       V1 = 1
    WHEN 'Z_ZAPO_002'.
      V1 = 2    WHEN '10' OR '11' OR '12'.
ENDCASE.

Yaroslav,
I_S_RKB1D-COMPID will never be filled for authorization user-exits (I_STEP = 0). Don't ask my why, I once raised this question to OSS and they replied it was never foreseen to work with authorization user-exits. God knows why, it's very unlogical and it wouldn't cost them a lot of work to get it working...
I could solve this problem by applying a little trick. In our queries we included a user-exit keydate variable. This will push the user-exit first in I_STEP = 1 mode where I_S_RKB1D-COMPID is filled. Then save the query name by exporting it to the ABAP-memory. Afterwards, the user exit with code for I_STEP = 0 will be processed and then you can import the query name from the ABAP memory.
I agree it sounds a little bit tricky but there is no better option I'm affraid.

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

Hide the query name in the workbook

Hi Experts,
I have a workbook and contains four worksheets defained from the same query.whenever i run the workbook the query name is displaying in the worksheet.My requirement is to hide the query name from worksheets outputs after the workbook executes.
Regards

Hi,
Open the orkbook. go to settings (Bex tool bar)> uncheck 'olap functions with right click'->Hide the header row of the workbook (using excel functionality..i.e right click on row>hide)->now enable 'olap functions with right click'-->save the workbook...
you will not see workbook name after refresh.

[svn] 4726: Accessibility changes to the MSAA name of several components, as requested by Freedom Scientific.

Revision: 4726
Author: [email protected]
Date: 2009-01-28 18:47:59 -0800 (Wed, 28 Jan 2009)
Log Message:
Accessibility changes to the MSAA name of several components, as requested by Freedom Scientific. These changes make Flex controls behave more like standard Windows controls.
In Accordion and TabBar, the name is now just what is displayed, without " Tab" or " Tab, Active" appended.
In ComboBox, List, and Tree, the name of each item is now just what it displays, without, for example, "2 of 7" appended.
Removed an artificial limit of 100000 items in List and Menu.
A Slider with an MXML id no longer returns that id as its name; no other component does this and id's are certainly no intended to be spoken.
Removed the getName() method of ComboBase, which isn't used.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Jason
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/AccordionHeaderAccImpl. as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/AlertAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/ColorPickerAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/ComboBaseAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/ComboBoxAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/DataGridAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/ListBaseAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/MenuAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/MenuBarAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/SliderAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/TabBarAccImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/accessibility/TreeAccImpl.as

Hello Brain,
I have contacted the internal alias to find why the [email protected] alias isn't working for you.
Regarding the specific question, I have not been able to find a way to achieve the same results in the source view as what the "double-click on the empty Starting Event target" does.
I can send you specific snippets of code which gets generated for each choice, but unfortunately, there are certain parts of this code which are auto created and should not be edited by the user.
In my experience with WLI processes, I've noticed that certain operations are restricted to just the design view.
I'll go ahead and create an internal CR to track this.
Regarding the second question, I was able to find the documentation you are referring to, but unfortunately I do not have much information regarding the specific configurations. I'll try to get some clarification and get back to you.
It might help to post this question to the process news group at http://newsgroups.bea.com/bea/forum.jspa?forumID=2047
cheers
Raj

How to find the query name when we know the program name? Urgent!!!!!

The same as the title, thanks in advance!
For example, the program for the query is:AQZZZSAPQUERY===ZPAYMENT_MEDIA.

Hi ,
I think you have not given the correct name of the program .
normally it will be AQZZ/SAPQUERY/ABZPAYMENT_MEDIA====
Take the characters from the end i.e. before '=' sign and search in SQ01 to get the query name.
for your example, Query name may be ZPAYMETN_MEDIA itself.
Hope it helps you.
Kind Regards,
Ravi Sankar.Z

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

Dynamic change in the query name based on user input

Similar Messages

Maybe you are looking for