Dynamic configuration for multiple files

Hi All,
I am new to PI. I have a proxy to file scenario, wherein 3 files are to be generated depending upon the value in a field (site ID) on the same receiver. Site ID can only have 3 different vales. All these 3 files are to have a dynamically defined name.
How can I configure this scenario? Is there any way in which all 3 files can have dynamically defined names? Please help.
Regards
Vipul

if you have only one recored (one site id) in proxy at a time, thn u can write a UDF for dynamic file name..
// UDF: public String SetFileNameDyn(String siteID, Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String myFileName = "";
if(siteID.equals("firstValue")){
     myFileName = "FirstFile1";
}else if(siteID.equals("secondValue")){
     myFileName = "SecondFile2";
}else if(siteID.equals("thirdValue")){
     myFileName = "ThirdFile3";
conf.put(key, myFileName);
return myFileName;

Similar Messages

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

Doubt om Dynamic Configuration of receiver file

Hello ,
for Acheiving the Dynamic configuration of receiver file name ,adapter specific message attribute is used...But how to suppress the name of file in the content of the Received file...
Is my question correct..do we get the file name in content of the receiver file,while using the Adapter specifc message attribute.
And another question ,in the Variable substitution ...do we get the above problem,then how to tackle the situation to suprress the file name in the payload of receiver file.

HI,
You can handle the dynamic file name via Dynamic configuration or with the help of Variable Substitution.
Please refer
have a look
Dynamic File Name using XI 3.0 SP12 Part - I --> Dynamic File Name using XI 3.0 SP12 Part u2013 I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II --> Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
With Variable Substituion, you may need to supress the filename
Dynamic File Name - Suppress the Substitue varible
Let me know if you need anymore info.
Thanks
Swarup

Dynamic Configuration for determining filename

Hi ,
I am using dynamic configuration for determining the filename sent by the sender
I am using the following code::
int i = 0;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
if (ourSourceFileName.equals("data.txt"))
for (i = 0 ; i < 1 ; i++)
result.addValue(ourSourceFileName);
i have also 'checked' filename in set Adapter specific message propertiesas in sender communication channel.
But Still it is not working.
Please provide some help on it.
Thanks & Regards
Nilima

Hi,
Michal
In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
and it displays::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName"><b>try1.txt</b></SAP:Record>
</SAP:DynamicConfiguration>
please sir provide some help on it.
Thanks once again.

Dynamic configuration for the application

I'm a newbie and trying to evaluate JSF. I took part in a project with struts framework and i could say i don't like struts cause of some limitation and i suspect that JSF has the same limitation. First of all, there are JSP pages. I can't use JSP pages/templates stored somewhere else except web application. I'd like to store my templates in the database. This will give me ability to add/change/remove jsp page without redeploying war-archive. Yes, i can use exploded war-archive and add JSP pages straight into file system, but i don't like this way. Next problem is the configuration file like struts-config (faces-config, whatever). I have to write down all my navigation logic and beans mapping to this file and it's really annoying me. This kind of project requires dynamic configuration for the all web application and i'd like to add/change/remove pages, beans, actions without restarting/reconfiguring webapp. Today, I looked thru documentation and source code and found that FactoryFinder class could use my own classes but i'm not sure it will be enough for the dynamic configuration for the beans. In any case, it's a huge problem with the templates.
Right now i'm thinking about 1(one) JSP with XML/XSLT rendered HTML content and JSF for event/action handling. I mean, i'll use XSLT to render dynamic content and JSF for dispatching events. In that case i have to render form tag names in the HTML as JSF engine (i'm not sure if it possible). If it will take a lot of time to do this i'll have to switch a home-grown framework.
So, i really need advices how to implement this sort of dynamic behavior in the web application.
regars,
anton

A lot of what you're seeing are genuine limitations, but happily, JSF is so pluggable that you can overcome them.
JSPs are problematic in exactly the way you describe - unless your app server has support for pulling JSPs out of a database, etc., you're SOL. JSF, however, lets you use something other than JSPs by replacing the ViewHandler. That's a fair bit of work, but it is doable.
For navigation logic, you'd replace the NavigationHandler. As long as you're willing to write the code that can pull navigation rules from an external source, life is good.
For managed beans, all you need to replace is the VariableResolver - again, if you can pull the rules from an external source, you have full control.
This is all far from easy - and it's a huge amount of work for one person - but I'd imagine these pieces will become available from various sources. A core goal of JSF 1.0 was making the framework as a whole pluggable so that others can innovate on top of the framework.
-- Adam Winer (EG member)

Is there a way to simultaneously add text to Comments field for multiple files?

Is there a way to simultaneously add text to Comments field for multiple files? I know I can use Option+Comman+i to bring up the Inspector window but it doesn't have a Comments field. For example, in iTunes you can select multiple files and change metadata for any field simultaneously and easily yet when it comes to the Comments field in the Finder, this seems to be missing.
In our production environment, Comments field is important because we place notes about what drive the file originated then when it gets transferred to LTO-6 tape via LTFS, we can quickly trace it in the event we needed to recreate the hard drive. Because tape archiving is linear, we can't store all of the files on the same tape.
We've tried using Apple's Automator but it too seems to not have a way to batch change text in the Comments field. Any help is appreciated.

What is "order data"?

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

How can i search for multiple file names (images) in bridge?

Hello everyone!
Does anyone know how to search for multiple file names in bridge?
That is to copy & paste something like this: _MG_2152, _MG_2177, _MG_2194, _MG_2195, _MG_2202, _MG_2212, _MG_2219, _MG_2261, _MG_2362, _MG_2401
Not using several criterias in the search box that is. That takes too long.
Thanks
Steffen Rikenberg Photographer
Oslo, Norway.
www.steffenrikenberg.no

Try this add-on [https://addons.mozilla.org/it/firefox/addon/find-all/ Find All]

Struggling to search for multiple files

Hi there,
I am struggling to do a search / select for multiple files.
Here is my workflow:
I have 2 computers, the one is used for all image manipulation using a combination of LR & PS and the other computer is used for the sales presentation using ProSelect.
Once I am finished with my post production I export all the images to my sales presentation computer in JPG file format.
After the sales presentation I then want to be able to Star the images they purchased on my post production computer. Currently I have been doing this manually, although time comsuming not too bad when you are only talking 20 images. However this is not working for weddings when looking at 150-200 images.
This is what I have tried. I did an export of filenames from ProSelect. I then removed the suffix i.e. .jpg. In Lightroom I select the Filter Bar, Text, Any searchabe Text, Contains and then paste in the list of filenames. After quite a while it will come back and say no images found or it might come up with only the 1st image in the list. I have tried several combinations of formating the list of filenames and none seem to work i.e. spaces, commas, semi-colon, each filename in "".
If anyone can help me in this regard I would be very grateful.
Thanks
Tony

If you have the file names of the photos, you can simply paste the text containing the file names into the filter bar text search (set the filter bar to search by file name)
For example, here's a short list of filenames that I would paste into the filter bar if I was searching my photos
DSC_0417 DSC_0922 DSC_0924

Custom HoverPanel for Multiple File Types Preview

Hi Everyone,
We Have a requirement to customize SP2013 Search Results webPart to List down multiple file types (Word, Excel, PowerPoint, PDF, Images, etc). we created our own Design Template for Search Results Item to show managed Properties we require. and we need to
create a Hover Panel to show the preview of those files. we tried to achieve this, but failed. can anyone please provide us a Solution for this ?
Thank you!

Hi Mohamed,
According to your description, my understanding is that you want to customize Hover Panel for multiple file type.
For achieving your demand, you can refer to these blogs:
http://sharepointfieldnotes.blogspot.com/2012/11/customizing-sharepoint-2013-search.html
http://yeshagrawal.blogspot.com/2013/06/sharepoint-2013-search-adding-hover.html
http://blogs.technet.com/b/tothesharepoint/archive/2013/09/17/how-to-display-values-from-custom-managed-properties-in-the-hover-panel-in-sharepoint-server-2013.aspx
http://www.sharepointnutsandbolts.com/2014/01/extending-SP2013-Office-365-search-hover-panel.html
Best Regards,
Eric
Eric Tao
TechNet Community Support
Thank you So much Eric,
The First Link "http://sharepointfieldnotes.blogspot.com/2012/11/customizing-sharepoint-2013-search.html"
Serves my purpose 100%, but seems like it has 3rd party Product Involved. can i achieve the same Results without using any 3rd Party Tools ?

How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

Can we create single External Table for multiple files?

HI,
Can we create External table for multiple files? Could anyone please explain it.
Thanks and regards
Gowtham Sen.

to merge 16 files having same structureWell, if files have the same structure, as per the reading of the example from the following documentation, you can create one external table for all your files :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14231/tables.htm#i1007480
Nicolas.

Applet for multiple file upload

Hi All
I have a requirement for multiple file upload where user can select multiple files as well as folders.
Would appreciate any pointers.
Thanks.

Google "java file upload"

Dynamic configuration for PI 7.1 in mapping for file adapter

Hi Experts,
I have used the code below to use dynamic configuration in PI 7.1, but it isnt working..
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm.
it shows the file name in the dynamic configuration in the sxmb_moni...
but hen i chekc it in operations mapping..it shows dynamicconfiguration has to be in queue ..
has ne one used it before??
I used a simple UDF to create it without any input parameter and I mapped it to a field n the target side...
has ne one faced a similar situation????
Regrads,
Tauseef

Hi,
Yes u r correct it will show error in operation mapping.. bcoz u cannot check the DynamicConfiguration in Operation mapping...
It will throw Exception..
The parameter to UDF depends on ur requirement.... Let us know ur requirements exactly...
If u r doing for file to file means no UDF required,, just check ASMA on both sides....
Babu

Give me full details of Dynamic Configuration for file

Hi all,
please provide details of Dynamic Configuraion for file.
Thanks and regards
sai

Hi,
Refer the below weblog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
And <b>check for the Communication channel settings how to do for Sender & Receiver File channels</b>, Dynamic configuration Code is also available in the weblog.The same code you can use in your UDF and map the output of your udf to one of u r target field.
By following this you can able to set the receiver file name as same is of your file name of Source.
Hope it will helps to solve u r problem.
Cheers
Veera

Dynamic configuration for multiple files

Similar Messages

Maybe you are looking for