Dynamic field flow direction Bottom to top

Hi everybody,
I have two wrapped fields. I'd like the field on the bottom to push up the first the page. Is it possible ? With javascript ? I know that the flow direction is Top to Bottom but is the reverse possible ?
Many thanks

Hi Ratnesh,
Here is the link to share the file : https://workspaces.acrobat.com/?d=sHcPjp3SH48eN9cQP-vjjA
In the box below, when I type several lines, the text is going from top to bottom. I would like it to go from bottom to top and push the box which is above. I guess it's not possible but ... a miracle
Thanks for your help.

Similar Messages

Dynamic field in master page header?

Is it possible to put a dynamic field in a master page header that will either pull from a hidden text field added to each subform (e.g., appID) or pull in the title of the subform itself? I have a number of variable-sized subforms that need the same header and footer, with the only distinct element being a different number at the top.
I've been looking for a standard variable or wildcard that can be used to dynamically reference an object at the same level in multiple subforms, but so far have not been able to find what I need.
Hierarchy:
form1
     masterpage
     subformApp1
     subformApp2

Hi Sankar,
Create on eattribute of type String and bind to title property of page header,
and your WDDOINIT or any event write code to set title for PG header,
You are using different buttons, use this code in your buttons and change text.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->Element_context.
DATA lv_pg TYPE wd_this->Element_context-pg.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
data pg1 type string.
pg1 = 'selected the record'.
lv_pg = Pg1.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
In button 1..
lv_pg = 'Enter the entries'.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
Cheers,
Kris.

Dynamic field labels in table control

Hi experts,
My requirement is to display dynamic field labels in table control can we do this. I am much aware
that we can do it in alv_grid. Please let me know.
Thanks in advance.
Sri

Hi Anubhab,
Thanks. With your help i could able to solve the problem. Let me put this in some
more detail.
When we are pulling the field from a table to table control we need to make sure the fields should have a data elements. After pulling all the fields to a table control ,we need to drag out and delete the current table control column headings and then drop in the (new) I/O fields into their place. I then set the text on these new fields within the PBO. If we try to drop the (new) I/O fields on top of the existing ones with out deleting it won't work.
Thanks & Regards.
Srikanth

Certain pagebreak in a form which is dynamic and flowed

Hello,
I have a question. I have a form which is dynamic and flowed. In this fom are differents documents. Before a new document begins I want to have a pagebreak. In the old form which was designed with Adobe Livecycle Designer 8.0 the pagebreak works. The new form which was designed with Adobe Livecycle Designer 8.2 the pagebreak doesn't work.
Can somebody help me?
Thanks!

You should first check if the Form is open, then only create a new instance if it's not open. Based on your code, I'd redesign CheckOpened so that it returns the opened instance, or null if it's not open. In button1_click, check the return value. If it's
null, create a new instance, otherwise use the returned refernce to make the modification, either by directly accessing label1, or indirectly by adding a property to Form2 that changes label1.text in the property-set method.
However, instead of searching for an open form, I'd just store a reference to it in a class level variable when it's created. So you just check for null if it's open. Additionally you must set it to null when handling Form2's FormClosed event.
Armin

Dynamic Fields and Images

Hi Folks,
I have to prepare some PDFs using indesign that will be used for Invoices. Our developers want to be able to add the logo and certain fields dynamically. I wanted to find out is there anything special i need to know to do to make the fields and logo updateable dynamically in the output PDF. What is this topic even under? Would it be a scripting thing? I tried Googling around to find answers but had no luck.
Just to give you an example of what I mean by dynamic fields.... i might have a field title "Surname" with text box alongside. My developers should be able to insert the correct surname into that text box when displaying the PDF
Thanks for your help community!

is the PDF generated in indesign going be used as a graphic for the Management Information System (MIS) to put data over the top of, or are "the developers" attempting to use indesign as a database query tool?
indesign's data merge has limited capabilities and using it as a "back end" to generate invoices is something that IMHO is beyond its scope.
can the OP please give more information so that a more properly formed answer can be given?

Custom ItemRenderer with dynamic field associations?

Hi All,
I'm trying to create a custom itemrender control that isn't tied to a specific type of data input. I'm creating a thumbnail itemrenderer to be used with the Sparks List control:
<?xml version="1.0" encoding="utf-8"?>
<s:ItemRenderer
xmlns:fx="
http://ns.adobe.com/mxml/2009" xmlns:s="
library://ns.adobe.com/flex/spark" xmlns:mx="
library://ns.adobe.com/flex/mx" autoDrawBackground="
true"
>
<s:layout>
<s:BasicLayout/>
</s:layout>
<mx:Image left="
5" right="
5" bottom="
25" top="
5" id="
img_thumbnail"source="
{data.image}"
/>
<s:Label
left="
5" right="
5" bottom="
5" verticalAlign="
middle" textAlign="
center" id="
lbl_label" fontWeight="
bold" fontSize="
10"text="
{data.label}"
/></s:ItemRenderer>
However, as you can see, the image source and label text properties are tied to specific fields in the data collection (image and label). I would like to provide a way to figure out what the label and icon fields are set to in the parent control, and set them accordingly in the itemrenderer. This should allow me to use the same itemrenderer with different objects, as long as they have a text and image property.
Any ideas? Thanks

After doing some research, I found my answer:
1) The data object is the current item which the List component is populated with. You can access any properties of the object using it. (Not what I'm looking for here.)
2) You can access the label property set by the labelField or labelFunction properties of the list control in the item renderer simply using this.label. This is exactly what I was looking for.

Comparing dynamic fields of objects using equals and hashCode methods

To compare the different objects of the same class with their contents like jobTitleId, classificationId, deptId & classificationId was to be done and do some manipulations later using Set and Map. I was able to do that by simply overriding the equals and hashCode methods of Object class and was able to fetch the information (like in the following Map).
    Map<LocationData, List<LocationData>>
The following is the class I used (its been shown to you so that it can be referred for my problem statement):
LocationData class
    package com.astreait.bulkloader;
    public class LocationData {
        String locId, deptId, jobTitleId, classificationId;
        @Override
        public boolean equals(Object obj) {
            LocationData ld = (LocationData)obj;
            return this.deptId.equals(ld.deptId) && this.jobTitleId.equals(ld.jobTitleId) && this.classificationId.equals(ld.classificationId) &&
    this.locId.equals(ld.locId);
        @Override
        public int hashCode() {
            return deptId.hashCode() + jobTitleId.hashCode() + classificationId.hashCode() +locId.hashCode();
Problem:
I'm already known to which all fields of this object I need to make the comparison.
i.e I'm bound to use the variables named classificationId, deptId, jobTitleId & locId etc.
Need:
I need to customize this logic such that the fields Names (classificationId, deptId, jobTitleId & locId etc) can be pulled dynamically along with their values. So, as far as my understanding I made use of 2 classes (TableClass and ColWithData) such that the List of ColWithData is there in TableClass object.
I'm thinking what if I override the same two methods `equals() & hashCode();`
such that the same can be achieved.
    TableClass class #1
    class TableClass{
        List<ColWithData> cwdList;
        @Override
        public boolean equals(Object obj) {
            boolean returnVal = false;
                    // I need to have the logic to be defined such that
                    // all of the dynamic fields can be compared
            return returnVal;
        @Override
        public int hashCode() {
            int returnVal = 0;
                    // I need to have the logic to be defined such that
                    // all of the dynamic fields can be found for their individual hashCodes
            return returnVal;
ColWithData class #2
    class ColWithData{
        String col; // here the jobTitleId, classificationId, deptId, locId or any other more fields info can come.
        String data; // The corresponding data or value for each jobTitleId, classificationId, deptId, locId or any other more fields.
Please let me know if I'm proceeding in the right direction or I should make some any other approach. If it is ok to use the current approach then what should be performed in the equals and hashCode methods?
Finally I need to make the map as: (Its not the concern how I will make, but can be considered as my desired result from this logic)
    Map<TableClass, List<TableClass>> finalMap;

Hello,
What is the relation with the Oracle Forms tool ?
Francois

How to get dynamic fields to spread to the next page?

Thanks to a couple of wonderful folks on this board. I have found a way to get my dynamic field to move and I have gotten the static text fields below that to move. Now I have another problem. As my dynamic field has expanded towards the end of the page. The static fields ahead of it have disappeared. I know that there is a setting to have the static fields move to the next page. Or is there a way to do it? I would love some help on this.
Thanks in advance

I had this issue. I had to wrap the static fields below in a sub form and change the settings on that sub form to flow with content like I did with the original text box. This will push the static forms to the next page on the form, but there is one problem with this that I haven't gotten around. When the text box spans multiple pages, printing the page will not print all of the text. For example. A text box where 45 lines of text are entered, 20 are on the first page, 25 are on the second page. It will display properly, but when printed the text that prints on page 2 will be the same text you see on page one. If I wasn't clear enough on moving the static fields, let me know. I can give you the steps. Hopefully the printing thing won't cause you grief.

Jumping to the bottom or top of a photo album?

Just wondering whether there was a way on the iPhone to jump directly to the bottom or top of a photo album, like the Safari jump to the top tap? Would be very useful for photo albums in the hundreds.

There is no quick way of doing it, either scroll or exit the album access a different album then access the previous album again and you will be back on top

Air flow Direction VI

Hello to all members ,
here is another problem for me
i want to move an object first some position towards left then towards top .
is any way to programtically do it(using property node ----> position )
here is attached VI please see and help me
thanks in advance
Attachments:
Air flow direction.vi ‏11 KB

It's not clear what you actually want to do, but why don't you simply use a picture indicator?
Why is there no loop in the toplevel VI? Are you using continuous run?
The sequence structure in the subVI is useless. Dataflow already determines the execution order.
Why is there a disconnected control over a diagram constant?
Changing the boolean from true to false make no difference if both states look the same.
The positions control needs to go outside the for loop. It will not change during the duration of the loop, so reading it once is enough.
What is the purpose of the hidden air indicator of the subVI?
Why the stop button and case structure in the subVI?
LabVIEW Champion . Do more with less code and in less time .

When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed

Get input for 100 dynamic fields in a single screen

Hi all
I got one requirement wherein i need to accept input for around 100 dynamic fields in a single screen. screen can scroll down if possible.
Can anyone tell me whether it is possible. if yes please let me have the sample code.
Thanks
Ravindra Suvarna

Ravi,
Probably a TAB STRIP might help you.
Seggregate your 100 fields logically, say 5 groups.
Have a TAB STRIP CONTROL, with 5 tab strips and place 20 fields in each of the tabs. Each tab strip will have a sub screen.
Regards,
Ravi
Note : Please mark the helpful answers.

Sum for Dynamic Fields in a Dynamic Table with Field Symbol

Hi All,
I currently have an report which I am looking to update with some totals. The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol. The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime. I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated. I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here. I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
Below is a simple sample of what the report currently looks like and what we are looking to add.
====================================================================================
As-Is Report:
DETAILED DATA ALV
Company Code | Plant | 2006 Total | 2007 Total | 2008 Total | CURRENCY
0001          |   ABCD |    1,500     |    1,200     |    1,700    |    USD
0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
0003          |   DBCA |    3,200     |    1,600     |    6,200    |    USD
Addition 1:
TOTALS PER CURRENCY
Currency                | 2006 Total | 2007 Total | 2008 Total |
USD              |    4,700     |    2,800     |    7,900    |
GBP                       |    2,300     |    4,100     |    3,600    |
Addition 2:
CONVERSIONS TO USD
                                      | 2006 Curr   | 2006 USD    | 2008 Curr   | 2006 USD   |
USD                       | 4,700 USD   | 4,700 USD   | 7,900 USD | 7,900 USD |
GBP   (1.5GBP/1 USD)    | 2,300 GBP   | 1,150 USD   | 2,300 GBP | 1,800 USD |
====================================================================================
Any recommendations will be appreciated.

Hi,
We cannot use the key word SUM in the loop at assigning statement.
The way i see is
When you are creating the first dynamic internal table , create one more with the structure below:
Currency | 2006 Total | 2007 Total | 2008 Total |
Then while populating the data into first itab,also move the contents to the second itab using collect statement.

Dynamic field value in Sales order item table control

Hi
I need to find the VBAP-VKAUS (Usage indicator) field value in run time of the creation of sale order ...these values stored in the table TVLV.
when i debug the program SAPMV45A in the screen 4900 this VBAP-VKAUS value gets empty in structure VBAP even though i can see other values like MATNR etc...
this field is configurable (dynamic) field and not appear for all the ordertypes.
i need to pass this VBAP-VKAUS value to KOMPD-VKAUS
Thru user-exit..so please let me know if somebody knows how to find this VBAP-VKAUS value.
Thanks in advance
Madi

hi,
Plz Check the struc KOMP/KOMK. Let me know, if this helped.
Rgds,
Raghu.

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

Dynamic field flow direction Bottom to top

Similar Messages

Maybe you are looking for