Dynamic file name in Open hub

Hi Friends,
I am using Open hub to send a flat file to an application server. the file name should be dynamic.
for eg. returnsYYMMDD.dat similarly salesYYMMDD.dat.
please help me as i dont know how to have this dynamic value in case of flat file on application server.
Thanks
Ujjwal goel

Hi,
Pls go through the below lionk
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417300)ID1655136650DB02514444191271871877End?rid=/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70&overridelayout=true
It may help you
Regards,
Marasa.

Similar Messages

Dynamic File name for Open Hub file

Hi All,
I wanted to create a .csv file using open hub destination. I wanted the name of the file to be dynamic based on month. for example in jan I wanted it as 01.Dump for January and 02.Dump for february.
is is possible at all to do that.I wanted to save the file in the application server. There should not be any manual intervention the process.
Thanks in advance.
Regds
Raghu

Hi
We have take month from the first record that we read.
Our requirement is to take one months data and give it in a file with a file name having the corresponding month.
In the code mentioned below MOC_CODE is the field that is used for this purpose.
Hope it helps.
Regards,
Raghu
code:
#!/bin/sh
Script to dump file.
Parameters.
$1 Division name to extract from the data file.
It re-arranges the columns.
It replaces values in strings.
Parameters.
DATA_FILE_NAME="data_file.csv"
HEADER_FILE_NAME="header_file.csv"
DIVISION_NAME="$1"
Re-arrange header file columns.
Transpose rows to columns comma separated.
HEADER_ROW=`cat "$
Re-arrange header columns.
Re-direct the output to a temporary file.
" | tr '\n' ',' | sed 's/,$//g'`
echo "$" | awk 'BEGIN { FS = ","; OFS = "," } { print $2, $3, $1, $4, $5, $6, $7 }' > "$.$.tmp"
Prepare awk program.
Re-arrange data file columns.
Replace UNI in 6th column with UNIT and Replace TON in 6th column with TONS.
Filter division rows.
AWK_PROGRAM="BEGIN { FS = \",\"; OFS = \",\"; TVAL = 0 } \$5 ~ /$/ { sub( \"UNI\", \"UNIT\", \$6 ); sub( \"TON\", \"TONS\", \$6 ); print \$2, \$3, \$1, \$4, \$5, \$6, \$7; TVAL = TVAL + \$7 } END { printf \"$ Total Value: %f\", TVAL 2> \"$$Re-direct the program to a temporary program file.Control.ctl\" }"
echo "$" > "$.awk"
Execute the data file formatting command.
awk -f "$.awk" "$" > "$.$
Get generation date.
Get moc code from data file.
.tmp"
GENERATION_TIME=`date +"%Y%m%d_%H%M%S"`
MOC_CODE=`head -1 $ | awk -F, '{ print $3 }'`
Prepare dump file.
DUMP_FILE_NAME="$_$_$_$"
cat "$.$.tmp" "$.$.tmp" > "$
Remove temporary files.
FTP dump file to remote server.
FTP.
rm *.tmp
REMOTE_SERVER="<replace with server ip address>"
REMOTE_USER="xxxx"
REMOTE_PWD="xxxx"
ftp -n "$" << EOF
 quote USER "$"
 quote PASS "$"
 ascii
 put "$"
 bye
EOF
Exit.
exit 0

Dynamic file name from input payload (RFC 2 flat file)

Hi,
I have an RFC to flat file scenario. The output flat file has not an XML structure, it's just a plain text file generated with abap mapping.
In my source interface (RFC), I have a field called <FILENAME>, I want to use the value of that field to create the target file using dynamic file name. But if in variable substitution I use payload:ZRFC_NAME,1,FILENAME,1 It doesn't work because the dynamic variable substitution try to access to output payload, not the source one...
What can I do?

Hi Marshal,
You can add a extra node to your target strucutre like
FileName- Node
--FileName - Element.
do the mapping from the field filename of RFC to FileName field in u r target strucure. And use this field path at Refrence in variable subtituion.
In the Content converison add the Name & Values as below
FileName.fileldNames -- FileName
FileName.fieldFixedLengths -- 0
FileName.fixedLengthTooShortHandling -- Cut
So the extra field in u r target structure would not populate in u r target text file.
Cheers
Veera

Dynamic file name ?

Hi,
I am following this blog to name the target file/directory dynamically at the runtime :
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
But I am getting this error in the CC monitoring :
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'interface_name ' for variable 'var1'.

Hi,
Try following this weblog for dynamic file name.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Dynamic filename come under the Dynamic configuration in moni, for your messages.
This is the code used inside.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
That is why Dynamic configuration is coming in output.. It is a class to generate dynamic configuration file at runtime provided by SAP XI.
Hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Dynamic file name in case of .txt output files

Hi all,
I have a query related to dynamic file name scenario.
In case of IDOC-XI-FILE sceanrio,
Is it possible to generate .txt file name based on Plant number like
%<Plantname>%_%<BusinessDay>_filename.txt
Note:I have implemneted this for .xml output files but I am not able to implement it for .txt output files .
PLEASE HELP ME .
Regards
Prabhat

Hi Prabhat,
I think, the normal Dynamic File Name generation should work fine in your case also. Even if you perform Content Conversion, you can use Variable Name Substiution to create your Destination file name as, the name of the file is determined first and only then is the content converison perfromed.
for info on content conversion, I would suggest that you go through this thread and check my reply,
Re: Dynamic File Name for Receiver File Adapter
Regards,
Bhavesh

Dynamic File name in File Adapter

Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
Saiju

Hi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
 message1
 SD01_E
 FileName
 row
 message2
 SD02_E
 FileName
 row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Dynamic File Name - UDF

Hi Master,
I written the UDF for Getting the Dynamic File name.
DynamicConfiguration conf = (DynamicConfiguration) container.getParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// Retrieve the filename
String FileName = conf.get(key);
This is working ok - but I want to return these values so I can be used in mapping.
when I try to add the statement return FileName; , the compiler then complains with the following error:
cannot return a value from method whose result type is void return FileName;
Please help me,
Thanks,
Anu

Thanks Nithiyanandam,
I am using the Same code. But i am getting the Syntax error:
Source code has syntax error: E:/usr/sap/DX1/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapaf708c00d6bb11dd83ee00101816a382/source/com/sap/xi/tf/_MM_I_FF_O_RFC_.java:13: cannot resolve symbol symbol : class variable location: class com.sap.xi.tf._MM_I_FF_O_RFC_ variable a; ^ 1 error
UDF Name: FileName
while creating the UDF, I select the first radio button(Value). not Context and Queue.
I written the below code.
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
String FileName = conf.put(key, a);
return FileName;
Thanks,
ANU

Dynamic File Name depending on the Source File name

Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name Targer Folder/Filename
NK01.VR59.L2007030 VR59/Rec.l200
NK01.VR71.L2017030 VR71/Rec.l201
NK01.VR77.L2027030 VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
Vijay

Hi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Dynamic File Name and File size

Hi All
I need some help in calling Dynamic File Name and Dynamic File size of a file in my adapter Module.
Could you please provided some help on the same?
I have tried the same through UDF it is working. Could anyone provide me the steps for the same
Regards
Abhishek Mahajan

Hi,
You can use the already available adapter module "DynamicConfigurationBean". Have this adapter module at the top of the module list in CC.
Have the parameter value as insert http://sap.com/xi/XI/System/File FileName and http://sap.com/xi/XI/System/File SourceFileSize (corresponding to the key names)
For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/45/da2239feb22e98e10000000a155369/frameset.htm
There is also a SAP note available for the same....dont remember the note number:(.....
Regards,
Abhishek.

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Dynamic file names in outbound file adapter

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Dynamic file name from messsage payload

Hi Friends,
My requirement is to read one .xml file , which has Purchase Order deatails and place .html file on receiver side, we are using XSLT for mapping.
The file name should be "POnumber.html " , i've gone through below but couldn't get much
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Can any one send the that code , and steps to add that code in side XSLT.
Thanks
John

Hi,
With above links
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
See in the below Michal blog , how to conver the file as html , take that part only.
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards
Chilla

File Adapter: Dynamic file name

Hello,
I would like to use a filename like this:
Name.<DOCNUM>.Direction.<Timestamp>
For DOCNUM I use variable substitution. Works fine.
For <Timestamp> I need a different format as the timestamp function
in file adapter create. So I try to set up my timestamp in mapping like
dynamic file name:
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Timestamp");
conf.put(key1, a);
Input a is date function which creates my desired timestamp format. In file adapter I try this:
Name.%DOCNUM%.Direction.%Timestamp%
or
Name.%DOCNUM%.Direction.Timestamp
or
Timestamp
all doesn't work for Timestamp.
So is there a possibility to configure a dynamic filename like this???
Is there a possibility to access dynamic configuration variables in dynamic filename except
the known for filename and directory??
thanks
chris
Edited by: Christian Riekenberg on Mar 10, 2009 4:02 PM
Edited by: Christian Riekenberg on Mar 10, 2009 4:05 PM

your file name needs to be
Name.<DOCNUM>.Direction.<Timestamp>
dont use variable substitution. use only dynamic configuration and set the file name
introduce a logic that will create the string
Name.<DOCNUM>.Direction.<Timestamp>
eg. String filename = "Name" + var_docnum + "Direction" + var_timestamp;
then use the dynamic conf code to set the file name and use adapter specific properties in you adapter to retrieve it.
Ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

Dynamic file name in Open hub

Similar Messages

Maybe you are looking for