Dynamic File - Page break

Hello,
Actually I'm quite new in Adobe Forms, but seems that I have a simple requirement.
I have a scenario that I receive a .tif file and need to show it in a container, using Adobe Forms.
No problems with this. I've created an Image Field and am passing the xstring to this parameter. This is working.
But I've came across a problem. In some cases, I might receive a .tif image with more than one page. In that case, I have one single xstring variable with all images. It's displaying only the first page.
As it's my first approach with this tool, I don't know if it's simple or if it's not possible.
Anyone can help me!?
Tks in advance.
Best Regards,
Flavio.

Hi xiangli,
Tks for your reply, but seems like I've done already as you told...
Let me know if I'm doing something wrong, based on the images above.
Tks.
Regards,
Flavio.

Similar Messages

Dynamically insert page breaks (runtime)

Hi,
I have 3 repeating frames within each other in Oracle Reports. In the 1st frame I have Product groups. I want to give the user the option (from Oracle Forms) to have all the product groups without page breaks or each product group on one seperate page.
I only found the "Maximum records per page" property but this can't be set in runtime. I also tried to put a boilerplate on the repeating frame and gave it the property "Page break before". It worked pretty well except on page 2 it repeated the first product group and on page 3 it repeated the second productgroup and so on.
Does anybody have a solution for my problem?
Thanks

I did this long time back.
1. keep repeating frame with field(value null or line) with page break..
2. using Format Trigger show or hide this field.

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject: Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID: 559111.1
Type: PROBLEM
Modified Date: 24-MAR-2008
Status: MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

Page breaks with dynamic table

Hi there!
We've built a LiveCycle process in which we get data from an XML file and generate the PDF in LC Output.
However, although the items are being correctly generated in the table, only the first 20 or so records are being included, generatin just one page.
There are around 200 records in the XML - we just can't find how to set up the XDP in LC Designer so that we get a multipages PDF containing all 200 records instead of just 20.
We are using a dynamic table with the following set up:
Pagination: Following Previous
In Binding tab, we checked Repeat Row for Each Data Item
This table was inserted using the Insert Table option in main menu, using the wizard and it's inserted in a subform.
All these setup options were applied to the table row element.
Any ideas?
Thank you!
Marcos

Hi Niall,
Thank you for the input!
However, there's something else we're missing here.
After I tried your suggestion there were actually page breaks... we got 4 pages. However, only one of them had any content (the dynamic table with 30 records) and the other three were blank. The XML that populates the table includes 200 records.
We're pulling our hair off here, trying to do this for days!...
BR,
Marcos

Dynamic tables and conditional page break

I have inserted a table in my form and have included an Add New Row button to insert additonal rows. I want a maximum of 16 rows added with a subtotal field. I want the table, then to automatically go to a new page with a subtotal field. At the end of all pages I want to include a total field. The table goes to the next page after a number of rows are entered, but there is not a break; the original form continues. How do conditionally break the page and have a (new) table display in the second page?
Thanks for your help.

Hi Paul,
Thanks for working with me on this. I have sent a copy to the gmail.com address. I'm new to LiveCycle, so please forgive me.
Date: Thu, 29 Jul 2010 09:18:53 -0600
From: [email protected]
To: [email protected]
Subject: dynamic tables and conditional page break
You can accomplish that with a single table and some creative script. I suggest that you get the table worked out and working correctly then we can add in the page totals and final total afterwards. Once the table is ready email the form to mailto:[email protected] and I will put together a sample for you that shows what to do. Please include a description of what you want to do with the email as the mail message and this forum are not tied together. Also if you have a data file that fills out the table that would be useful as well.
Paul
>

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

RE: How can I create a page break in a file?

Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

How can I create a page break in a file?

Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------

Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);

Prevent Occurence of list header and page breaks in spool file of ALV Grid

Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
But the required is like this
Column1 Column2 Column3 Column4
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
data        data        data       data
Please suggest a posible answer

Hello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties.

Rebuild dynamic header row in table after page break

Hi,
I have a table with dynamic columns. So in the initialize event of the table, I'm build up the header row (add columns with addInstance etc.). The same I'm doing with the table rows. It works fine, so I see correct header row and also several body rows with the right content.
My issue is now the page break. When I tick the checkbox "Include headerow in subsequent pages", it will show a heade row, but not my dynamic build one. So how can I make sure, that my dynamic creation of the header row will also take place on each page? Is there any event, where I can placed the code it, so the header row is being created on each page freshly?
I was thinking about to create another header row, for which one I ONLY tick the checkbox "Include headerow in subsequent pages", but this was working neither.
Do you have any ideas here?
Thank you & best regards,
Arne

Hi Nitin,
in this case, you must use more nested wrapper subforms and set the root subform layout from "flow" to "positioned". I cannot give advice on how the wrapper subforms are organized, since it depends on your logic, just try it out.
Cheers,
Tao

How to achieve dynamic page break in Smart form

Hi
1.How to achieve dynamic page breaks in Smart forms.
2.What are the various table types in Smart forms.
Regards

Dynamic page break : 
create a node of type COMMAND and in its attributes check "Go to new page".
There are Tables and Templates in smart forms :
Use node type Template to display a table whose layout and size (number of lines and columns) is determined before the runtime of the print program else use Table.
Take a look at <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf">SAP Smart Forms (BC-SRV-SCR)</a>
Regards

Issue tabbing across page breaks in dynamic form

Hi all,
I have a strange problem that I'm having trouble getting to the bottom of, relating to my dynamic form.
This form grows and shrinks depending on how the user fills it out. I have a questionnaire section where certain questions are hidden or shown depending on previous input.
Things get interesting when I look at the tab order. Sometimes when tabbing forward or backward across page breaks, the focus lands on a spot that I cannot identify. There will be no cursor and I can not type. However if I continue to tab in the same direction, I can see that it is still going in the correct sequence. It just looks like for some reason, in those places, focus is put in the wrong component. But if I type different input into the prior fields (ones that affect the length of the pages) that causes the field to move to different place where it's not adjacent to a page break, and then tabbing to the field in either direction works fine. It seems that only when it's beside a page break, it becomes problematic.
Also, it only seems to be a problem if the field gets moved to be adjacent to a page break AFTER the form is initially rendered. If the field was originally beside a page break by default, then it seems to work fine.
Just to rule out a possible problem with the tab order configuration, I set my from to Automatic tabs, and even went as far as removing all the <traversal> elements from the form.
After doing either of those things, the problem still persists.
Has anyone seen this before?

Hi Eric,
I have seen funny behaviour when tabbing within Preview in LC Designer. It may be picking up a read-only item in the Master Page.
Good luck,
Niall

New file per page break

Is there a way to have a Crystal Report export a seperate PDF or other format file per page break in the report?

Hi Bill,
According to my understanding you have a report running into multiple pages and you would like it to have exported on different PDFu2019s.
I have done a quick test and we cannot have a different PDF for each page break in the report. When we export a report that will export the whole report.
I hope this helps you.
Regards,
Prashant

Create a dynamic file list page

I have two folders under my main heirachy for our web site. One is called Prod and the other is Dev. I have folders and irpts within them. I would like to create an html filelist page so when I am on the web testing it, I can quickly see all of my files and click anyone of them to quickly see the page. Does anyone know how to create dynamic file list pages that will automatically update as files and folders are added?

You can always just enable "Directory Browsing" in the default web site in IIS.
You can do this by opening IIS and navigating the PROPERTIES of the Default Website...click the Home Directory tab...check the "Directory browsing" box...apply the settings and you should be good.
Note: a restart of IIS might be necessary for the changes to take effect. You can do this by executing a simple "iisreset" from the run command line.

How to insert Page Break in SPOOL file

How to insert Page Break in SPOOL file.

How to insert Page Break in SPOOL file.
SET NEWP[AGE] {1|n|NONE}
SET NEWPAGE is not supported in iSQL*Plus
Sets the number of blank lines to be printed from the top of each page to the top
title. A value of zero places a formfeed at the beginning of each page (including
the first page) and clears the screen on most terminals. If you set NEWPAGE to
NONE, SQL*Plus does not print a blank line or formfeed between the report pages.
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a90842/ch13.htm
SQL> SET PAGESIZE 5
SQL> SET NEWPAGE 0 --a form feed between your pages
SQL> SPOOL C:\output.doc
SQL> SELECT * FROM emp;
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800          0         20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850          0         30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450          0         10
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7788 SCOTT      ANALYST         7566 09-DEC-82       3000          0         20
      7839 KING       PRESIDENT            17-NOV-81       5000          0         10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7876 ADAMS      CLERK           7788 12-JAN-83       1100          0         20
      7900 JAMES      CLERK           7698 03-DEC-81        950          0         30
      7902 FORD       ANALYST         7566 03-DEC-81       3000          0         20
     EMPNO ENAME      JOB             MGR HIREDATE         SAL       COMM     DEPTNO
      7934 MILLER     CLERK           7782 23-JAN-82       1300          0         10
13 rows selected.
SQL> SPOOL OFFKhurram

Dynamic File - Page break

Similar Messages

Maybe you are looking for