Rebuild dynamic header row in table after page break

Hi,
I have a table with dynamic columns. So in the initialize event of the table, I'm build up the header row (add columns with addInstance etc.). The same I'm doing with the table rows. It works fine, so I see correct header row and also several body rows with the right content.
My issue is now the page break. When I tick the checkbox "Include headerow in subsequent pages", it will show a heade row, but not my dynamic build one. So how can I make sure, that my dynamic creation of the header row will also take place on each page? Is there any event, where I can placed the code it, so the header row is being created on each page freshly?
I was thinking about to create another header row, for which one I ONLY tick the checkbox "Include headerow in subsequent pages", but this was working neither.
Do you have any ideas here?
Thank you & best regards,
Arne

Hi Nitin,
in this case, you must use more nested wrapper subforms and set the root subform layout from "flow" to "positioned". I cannot give advice on how the wrapper subforms are organized, since it depends on your logic, just try it out.
Cheers,
Tao

Similar Messages

  • Dynamic Header row for table not aligned properly on 2nd Page

    Hello Friends,
    The problem is like this :
    We have a table with dynamic number of columns and few of them are being hidden at runtime based on a configuration table.
    Now problem while printing is that first page is printing the header row, but same is not being repeated on subsequent pages.
    Please see the layout
    Header row is warped in 2 subforms both are flowed - western text so that they will get squeezed if column is hidden
    Here are the properties for subforms
    1) overflowLeader => Flow top-bottom
    2) OF_SF => Flowed , western text
    On 2nd page all the columns are getting aligned to left hand side whereas printing fine on first page.
    Thanks,
    Nitin

    Hi Nitin,
    in this case, you must use more nested wrapper subforms and set the root subform layout from "flow" to "positioned". I cannot give advice on how the wrapper subforms are organized, since it depends on your logic, just try it out.
    Cheers,
    Tao

  • ALV: Display Header,  line item, information after page break .............

    Hi .
    I am facing problem in displaying a particular layout in ALV.
    the layout is as follows:
    1. Header part
    2. Line item
    3. There is field customer and after every change of customer do page break and display information like how many record read and how many record processed. below is brief detail about how to get read and processed record.
    I have two internal table  say table1 and table2.
       Looping table1
      increase the counter as counter_read = counter_read +1.
    compare the record with table2.
    if matches
    increase the counter as counter_process = counter_process + 1.
    4. At the end of report display a error log.
       to get the error log we will follow the above logic and if record not matched then display as error record.
    Please help ASAP to find the solution.
    Thanks in advance

    There is a knowledge base article C2014229 (1210986 - Subreports do not have a Page Header) , but instead of providing link I will just copy content here:
    Symptom
    Since subreports are objects in the Main Report, they do not contain Page Headers. How can you create a fake page header for subreports?
    Resolution
    To create a fake page header for subreports, use the following steps:
    1. In the subreport, create a formula:
    @FakePageHeader
    //name of formula
    WhileReadingRecords;
    2. Go to the 'Insert' menu and click 'Group'. Select the @FakePageHeader formula.
    3. Select the 'Repeat Group Header on Each New Page' option, and click 'OK'.
    This inserts a new group at the lowest, or innermost, grouping level. You will need to move this group to the highest, or outermost, grouping level.
    4. Go to 'Report' menu and click 'Group Expert'. Use the up arrow to move this newest group up to the top of the list.
    5. Move all the headers that you would like repeated into this Header for the @FakePageHeader group.
    Hope it will help.

  • Extra blank line inserted after page break

    Hello,
    I am currently having trouble with alignment using templates in BI Publisher.
    I am trying to create a template that will be printed on a pre-printed form.
    Each group in the report should be separated by page so the group has a <?split-by-page-break:?> right before <?end-for-each?>.
    However, when the next page begins, there is a blank line inserted. This messes up the alignment altogether.
    Code is like this:
    <?for-each-group:G_Document;./DOCUMENT?><?sort:current-group()/DOCUMENT;'ascending';data-type='text'?><?for-each:current-group()?>
    ----INSERT Table TEMPLATE HERE---
    <?split-by-page-break:?><?end-for-each?>
    Output turns out like this:
    (Page1)<TABLE TEMPLATE>
    <Page Break>
    (Page 2)<New Line>
    <TABLE TEMPLATE>
    <Page Break>
    (Page 3)<New Line>
    <TABLE TEMPLATE>
    <Page Break>
    I have found this old thread Split-By-Page-Break inserting extra line that has the exact same problem, however, I have tried all suggested solutions even the last one, and I still am encountering the problem.
    Any help would be greatly appreciated.
    Regards,
    Jovee

    Thanks Varma, for the solution you provided.
    The code for page break was inserted right after the for-each tag, and looks like this:
    <?for-each:current-group()?><xsl:attribute name="break-before">page</attribute>
    Template now works without the extra blank line.

  • Repeating Multiple header rows of table in subsequent pages

    Hi Gurus,,
    I'm struck in a typical problem.
    I have a Table with 2 header rows in a flowed subform.
    when content flows to the next page, the table displays either the Ist header row or the second Header row depending on the checkbox selected for the individual header row.
    The problem is how to get both the rows in the next page.
    When I try to select both the header rows for display in initial as well as subsequent pages either of the one only remains on activation of the form.
    Any help will be highly appreciated.
    Thankx in Advance.
    Aryan

    Hi Srini Vasan,
    In the Hierarchy View of the Palettes, goto the Table you created, Right click on one of the Header Rows in the Hierarchy View, there you select Group as Section. Now a section will be created, in this you drag another Header Row also(in Hierarchy View only).
    Now goto Object Palette of Subform(where the Table is present in the subform), for this you make Content as "Flowed", Flow Direction as "Top to Bottom", and select "Allow Page Breaks within content". For this Subform goto Binding Tab and there select "Repeat Subform for each Data item, select "min count" and enter 1 and dont select "max count" and "initial Count".
    Now goto object Palette of Table in that select "Allow Page Breaks within content". now goto Binding in that select "Repeat Subform for each Data item, and dont select "min count", "max count" and "initial Count".
    Now goto the object palette of the newly created Section  inside a table. for this goto Pagination there select "Include Header Row in Initial Page" and also "Include Header Row in Sunsequent Pages". Now goto Binding Tab and there select "Repeat Subform for each Data item, select "min count" and enter 1 and dont select "max count" and "initial Count".
    Now goto object Palette of Table Row in that select "Allow Page Breaks within content". now goto Binding in that select "Repeat Subform for each Data item, select "min count" and enter 1 and dont select "max count" and "initial Count".
    Regards
    Pradeep Goli

  • Repeating Header Rows - Not repeating beyond page 2

    Hello,
    I'm at my wit's end and I have yet to see a response to questions related to repeating headers (though I've seen it in a few forums).
    I have a flowed form with an initial header table and then 4 subforms, each made up of tables with a header group of two rows and then a user-modified number of data rows. Each of the subforms has it's own 2 line header, which includes a static "topic" row (with "add/delete row" button) and then a second header row with the column titles (9 columns across). As I said, these two header rows are grouped together.
    Each of the 4 subforms can (and does) flow on to multiple pages once filled in by the users. At first, my issue was getting the two rows (grouped) that make up my header to repeat on subsequent pages for each subform. No go - apparently grouped header rows can't make up an overflow leader (I can only choose one of the two), and when I check the box to make the GROUP appear on subsequent pages under pagination, it will only appear on page 1 and 2 for that particular subform...so I've given up on that. Now I just want the second header row (with the column titles) to appear on every page that each subform overflows on to, but I can still only get it to appear TWICE. Anytime a subform moves onto a third page, requiring a third instance of the header, it doesn't work.
    I came across one solution involving the "repeat header for each row", but that came with a host of new bugs, including a bug where every time I open, edit data in a particular subform and save the file, a NEW header group row is added to that subform (after 12 opens, there is literally 12 header rows at the top of each of my 4 subforms if I edit data in all 4)...though it solves the other issue and the header rows DO appear properly on subsequent pages beyond page 2!!!!
    Any solutions? I've run into this on three separate occasions over the past year when building forms and every time, I've hit this wall, given up the search for a solution and sacrificed aesthetics and functionality in my forms that I shouldn't really have to.
    Ck.

    Here is a sample I did for you..
    https://acrobat.com/#d=BSeyeLhbaeyqXfwX*wrwzA
    The difference with this file, is I created a table and then in the top row I merged all cells. Then created a table with two rows inside this merged cell.
    In the Header row properties I checked, repeat header in Subsequent pages.
    Let me know if you have any issues..
    Thanks
    Srini

  • Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

    I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
    When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
    Is there another setting required to maintain the page breaks after the item change?
    Thanks.

    We are experiencing the same problem. Did you ever find a solution?

  • Header Rows in Tables

    Hi InDesigners
    I am wondering is there a way of excluding the first row in a header row when it breaks at the end of a page?
    The reason I ask is that in the first row of every table header rows a caption is contained (for example "Table 1.1 Colours of Flowers") but that information does not need to be repeated on the second half of the table but the rows underneath the caption does. An example is shown below
    Table 1.1 Colours of Flowers
    Rose      Violet     Daisy
    Red         Purple     Yellow
    White
    Orange                              
    ------- new page -----------
    Rose      Violet      Daisy
    Apricot
    Pink

    Hi Sorry for being unclear.
    The image attached probably explains it better. See text in blue.
    If I create a frame to hold the table the text wrap occurs nicely, however the TOC will be mis ordered. I don't know why

  • Need help with disappearing header row in tables

    Hey guys.
    I'm working on a large document with tables (annual report). I have set up table styles with header and body cell styles. When I apply the table style to a table, then convert the first row to header row, the entire header row disappears...!
    If I leave the row as body row and just apply the header cell style to it, it won't disappear. The row will only disappear if I convert it to header row in Indesign.
    I checked the Word doc I imported the text from, the first row of the tables is just normal body row.
    I dunno where to look so I have no idea how to fix this problem. It happens to all the tables. I was supplied this file. I don't particularly want to recreate the file. The original file was created in Creative Clouds and exported to idml for me as I have CS6.
    Has anyone experienced the same problem or know what's the solution? I really need help.
    Thanks in advance.

    It may be on the Table Options dailog box on the section of Headers and Footers> Header: Repeat Header the Skip First is check on.

  • Making header row of table static on scrooling

    Hi,
    I want , when i scrool down or scrool up the table header row must stay unscrooled.
    How can i do that?
    Thanks.

    Hi Armin,
    I recommend not to use all these crappy workarounds.
    Unfortunately,  we, the developers,  can not ask the customers to upgrade for achieving this type of small requirements.
    Even we can not say "It is not possible in this version". That is the reason we are looking for workarounds.
    It is a very common requirement from the customers that is why SAP also have given this functionality in CE 7.1.
    Since it is not a product development , we don't have such a freedom.
    I did not expect such an answer from respectable  moderators like you.
    Regards,
    Siva
    Edited by: Siva Rama Krushna on Sep 25, 2009 11:19 PM

  • Pages deleting table after Page 1

    Has anyone had the situation where they are working in Pages, created a table, made a change to Page 1 (for example something as simple as changing the Font Size) and it keeps deleting all the pages after Page 1?
    It happens to me all the time and I can't work out why.

    Hello
    Which mode are you using?
    I guess that you are using the layout one.
    You may try to use the Word Processing one.
    Yvan KOENIG (from FRANCE mercredi 30 avril 2008 12:22:04)

  • Image not printed in SapScript, only after page break

    Hi,
    I have a problem in printing an image (stored as text) in a sapscript. The image was uploaded correctly from a TIF file in tcode SE78. The image contains a signature and I need to print it at variable positions within the form. That is I need to print it in the MAIN window. The image does not get printed when a page break occurs when outputing the text element containing the picture. If the page break occurs when outputing any (other) text, the image is printed correctly (after that text).
    Has anybody else encountered this problem? Could it be a sapscript bug?
    Thx in advance.
    Claudiu

    >
    > Looks like the last page is not called !!! I can see data only on one page and it shows page 1 of 1.
    >
    > "make sure ST_TEMP is filled with data" how do I do this ?? My program line node has the data filled in the internal table it_temp and the loop node has the data transferred to st_temp for every row. How can I debug the program lines code ??
    > > Have a break <username> in the program lines. and check it_temp has data in it.
    > "use a command and call the last page at end of the loop on internal table"...how to do this ?
    > > like program lines there is a "command line" do a little search on SDN for more info on how to use command lines for next page.
    >

  • Table Overflow - Page Break - Multiple tables in Body page in Adobe forms

    Hi,
    I have to do a payslip in Adobe forms. I am using only Adobe for print forms.
    Please redirect me to correct category if this is wrong category.
    I am customizing standard form PYXXFO_SAP_PAYSLIP_IN01. (payslip for india through hrforms)
    The standard form is entirely positional. So, if the contents of the table overflow, they are overwritten on the contents below.
    So, I have to make corrections to adjust the payslip for table overflows.
    My changes:
    1. There are total 8 tables in form. I created content areas for each of them and assigned the subforms/tables to those content areas.
    2. I converted the body page from positional to flowed, and applied the related pagebreak settings.
    The problem I am facing:
    When the earnings table overflows, the rest of the content is displayed on second page, in a continuous manner.
    eg.
    The structure of the form is:
    Header details
    earnings table   deductions table   form16 table
    Other tables
    leave details
    now, if the earnings table overflows -
    page 1:
    Header details
    earnings table (page break)
    Page2:
    (continued)earnings table
    page3:
    (continued)earnings table   deductions table   form16 table
    Other tables
    leave details
    In this, the deduction table and form16 table is shown on 3rd page. I wish to show them on the first page as they have not overflown.
    I am sure, I am missing something very small, but I am unable to understand what.
    I tried all the possible combinations.
    Does the main subform needs to be "positional"?
    They way I expect it is:
    page 1:
    Header details
    earnings table (page break)    deductions table   form16 table
    Other tables
    leave details
    Page2:
    {Header details - It would be great if I could have this}
    (continued)earnings table
    page3:
    {Header details}
    (continued)earnings table
    Also, If this is successful, I would like to apply the same feature to rest 6-7 tables.
    Edited by: chinmay kulkarni on Aug 17, 2011 3:04 PM

    This was a duplicate question.
    Kindly remove this thread if possible.
    The solution for this thread is as follows:
    I was sort of hoping that there should be some standard functionality available for this, it being Adobe, but there is not.
    So, I had to run a work around. Quite a lengthy one.
    What the problem was:
    I needed to print around 4-5 tables adjacent to each other in single page and in verticals. What Adobe does is: it fills 1st table, then 2nd then 3rd and so on. So, if there is a page break due to large entries in the adobe, the contents breaks with rest of the tables being blank, but the content being filled sequentially.
    What I did was:
    I created a grand table with the structure having all the tables embedded in it. eg.
    data: begin of grand_table occrs 0,
    table_A type table_a_table_type,
    table_B type table_b_table_type,
    table_c type table_c_table_type,
    end of grand_table.
    Hence, I could include all the data in a one single grand table, and put the data in sequential manner.

  • How to put a solid bottom border for table at page break - XML Publisher

    Hi There,
    In XML Publisher Invoice report template, I have table with hidden lines. It repeat for each invoice item.
    However I need to close the table with a solid line at the page break, when the table is extended to multiple pages.
    How can we know if its a page break. I think we can use an if condition if we know the tag for page break( for example like this <?if:@page-break="true"?> ).
    Thanks in Advance.
    Vishnu.

    You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
    Or just before your end-for-each, have this code.
    <?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
    Ensure that its placed in a form field.
    This will have a page break when LOCATION changes.

  • Invoice data repeating Address after page break

    Hello forum mebers,
    i have a problem to create a rtf template which prints invoice data with more than one address.
    The original data has more than one invoice to print all papers within one output.
    It is for repeat printing. I want to mark several invoices to print.
    The source data is splitting into header information (Address,Invoice number,summaries), invoice positions and company information (client).
    How to create the xml source ?
    How to create the word rtf template to repeat the invoice address on each page also if the first invoice has more than one page.
    I have tried the <?template feature, but this only repeats the first address of the data.
    I have tried the <?start:body feature, but this creates all addresses on the first page.
    I have tried the <?split-by-page-break feature, but this creates no repeating address header.
    I am clueless.
    Do you have any help or example for this problem ?
    Regards
    Frank

    Hallo Jorge,
    danke für die Antwort und das RTF, aber soweit war ich auch schon.
    Wenn mann jetzt noch sortiert nach ID und einen Header (template) und Footer hinzufügt, funktioniert es nicht mehr.
    Gruß
    Frank

Maybe you are looking for