Dynamic Name for CSV files

I would like to be able to set a target CSV file who's name changes dynamically.  Specifically, it would be something like "today's date" + loan_Transactions (02-01-2008loan_Transactions for instance).  Any thoughts would be appreciated!!  Not having much luck.
Thanks.
Brian Black

Greetings Post Originator,
This post is older than 60 days and there are no entries in the past 30 days.  Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible. 
Thank you for being an active participant in the SAP Forums,
Rob Siegele
Forum Moderator
SAP Americas

Similar Messages

  • How to give dynamic name for csv export files?

    Hi,
    how we can give dynamic file name for each csv export file? ex(&item_name.csv)
    I am using apex 4.1 and IE 6,
    thanks in advance
    regards
    Chandran

    Please help me on this
    I am using report template as a csv export..
    when user click on download link on other page he will redirect to csv export temlate page and he is is directly get the open or save window
    but dynamic title name is not working for only for this.
    regards
    Chandran

  • Need help in Creating a dynamic name for a file.

    I am working on FTP Put and I have a requirement where in I have to generate the file with dynamic content in its name.I dont need any time stamp.I need to create a variable for this?
    Help in this regard would be highly appreciated.

    Take a look at File tmp = File.createTempFile("aaa", ".txt");
    String name = tmp.getpath();This will create a File with a name like aaannn.txt where nnn is a system generated number guaranteed to exists only once.

  • Dynamic  File Name for Receiver File Adapter

    Hi All,
    How can we use dynamic name for Receiver file adapter?
    Can anyone help.
    Thanks in Advance
    Chemmanz

    Hi Chemmanz,
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    Bhavesh

  • Please choose a different name for the file

    How can I stop this message appearning ?

    By choosing a different name for the file?
    You will need to provide a lot more information. 
    What are you trying to do when you see the message?
    What version of Sqldeveloper are you using?
    What operating system are you running on?

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • Gui_upload for csv file with numeric n date fields

    Hi ,
      i searched on net on how to use GUI_UPLOAD for csv files using split function but the spilt function requires that the data type of all fields of the internal table should be character whereas in my case there is a numeric n data field too.So kindly help me how to do it.
    One way ppl might suggest that give all the fields as char in the internal n after recieving the data in the internal convert the required fields back to data n numeric n then finally insert to the database but if i have 80 fields u would really dont want to do that as it requires precision to convert it to the same type n length as in the original database for all the fields.

    yeah i guess that would be a bit longer if i m having more no of fields (80) compared to ORACLE where this can be done in a shorter way.
    SO i shall use 2 internal tables here rite?? i mean first one(with all fields as char) for storing the split function values and the other one (with actual data types) .CAN u plz tell me how to convert or cast from one data type to another n while moving values from 1st internal table to another  which way shall i do.
    Thanks for ur help n can u suggest if there is any other method for uploading csv also other than this split method n whether this method is better n faster than others.
    THANX

  • Dynamic Name for Yellow Interface Table

    Hi All,
    Can anybody guide me how to use dynamic name for Yellow Interface Target Table.
    Eg: T_SESSIONID.
    I tried
    1)Refreshing the SESSIONID in a Variable V1 and using T_#V1 directly
    2) Refreshing the T_#V1 in a Variable V2 and using #V2
    But its not creating properly.
    Please guide.

    You want to create dynamic target table name right?
    You can refresh a variable like #GET_SESSION
    #GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
    My tmp table name like TMP_#GET_SESSION
    then in your package refresh #GET_SESSION variable and you can use it.
    I hope this can be helpful
    Thanks

  • Dynamic name for the physical table

    Hi Guys,
    How to setup dynamic names for the physical table? Where it is useful?*
    Pls help me out on this.
    thanks

    Check this similar post which might be of help dynamic physical table source schema
    Cheers,
    KK

  • How to give a dynamic File Name for Receiver File/FTP Adapter.

    Hi Experts,
        I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out"  & in File Consturction mode i have given as "Add Time Stamp".
        therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
    where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
        How to do this ?
        for your info we are using ABAP Mapping.
        Pl help me
    Regards,
    Umesh

    Hi Umesh,
          Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
    And refer the below weblogs for Variable Subtiutuion File Name Scheme
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    Hope this way would be solve u r problem.
    Cheers
    Veera
    >>>Reward points, if it is needful

  • File to mail scanario   Dynamic name for e-mail attachments

    Hi ,
    I am using standard mail package for Dynamic name in the mail attachment.
    Content_Disposition : = attachment
    Content_Type =  file name  I am taking from DynamicConfiguration
    Now I received mail , but file name have (abc.txt.dat) extension .dat  but i want it same as send by sender file adapter(abc.txt)
    Please suggest how to handle this.
    Thanks
    Mohit

    Hi,
    my pretty solution
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3202
    Regards,
    Michal Krawczyk

  • Dynamic name for File through FTP Adapter

    I am working on FTP Put and I have a requirement where in I have to generate the file with dynamic content in its name.I should actually embed a Purchase Order number in that file name follwed by a sequence number.I dont need any time stamp.Should I create a variable for this?
    Help in this regard would be highly appreciated.

    Hi,
    you have to enable the adapter specific parameter --> file name in both the sender and the receiver CC to get the input file name as output file name.
    Refer this blog:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Also you need to use this udf
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    Also refer this blog:
    /people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
    Regards,
    Nithiyanandam

  • Custom dynamic names for outbound payment files in R12

    I have asked this on a couple of forums, but somehow missed this one.
    We are upgrading from 11i to R12 and require custom dynamic file names for the Payments output files (cheques, advices, efts). I see that you can create a custom prefix and extension through payment profiles, but the functionality is very limited (i.e. no date stamp). I am thinking that others must have come across this before, and am wondering how you have handled such a requirement. Is it possible to add custom steps to the seeded payment process? Can the payment process be run as part of a request set and then a custom step added which grabs the output file and renames it based on information obtained from the batch and the process profile. Our goal is a fully automated payment process where batches are scheduled, processed and files renamed and sent out to banks and a 3rd party printer with no user interventation.
    Any advice/tips would be appreciated.
    Thanks.
    Tam.

    Hi Tam,
    Could you please let me know if you got the solution as we have a similar requirement of renaming the output file as perthe business needs fro which we need custom program.
    Thanks,
    Manas

  • Dynamic Filename for Reciever File Adapter

    Hi All,
    Can anyone answer to some of my quesries which are as follows
    a) . Currently Iu2019m working on an IDOC-to-File scenario in which I need to create zip file on file server by using a payload value.  I 
        search sdn and found a bean that can be used to create zip file which is PayLoadZipBean. Iu2019m referring the below weblog for creating file name dynamically.
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    My question is can anyone explain or provide me the step by step procedure in detail for the prerequisite which are mention in the weblog, i.e. 
    u201CAssuming that the following have been done and configured.
    1.A value table has been created in the ABAP stack of the WAS in which XI is running and the entries as the file types, which will be written into the files are maintained.
    2.Create a number range object in SNRO transaction in the same ABAP stack which will be having the sub objects as the file types maintained in the value table with their number ranges maintained. u201C
    b) .Can we use all mapping techniques (ABAP, Java, XSLT and Graphical) in a single scenario if yes then how to trigger them and which one executes much faster?
    c) .Can we trigger an RFC asynchronously and how?
    Your help is highly appreciated and
    Regards
    Faisal
    Edited by: Abdul Faisal on Nov 19, 2009 8:53 AM

    a) . Currently Iu2019m working on an IDOC-to-File scenario in which I need to create zip file on file server by using a payload value. I
    search sdn and found a bean that can be used to create zip file which is PayLoadZipBean. Iu2019m referring the below weblog for creating file name dynamically.
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    My question is can anyone explain or provide me the step by step procedure in detail for the prerequisite which are mention in the weblog, i.e.
    Hi  Use dynamic configuration UDF to create file name dynamically.its very easy search in sdn you will find the code,even you can create file directory name dynamically.
    In receiver file communication channel if you use PayLoadZipBean it will do Zipping of your message,for this you need to add this bean name additional parameters section in Receiver Channel.
    If you want to create zip file based on pay load value check the condition at mapping level based on that call the service,if you not required zip file in other case for that you need to create one more file receiver communication channel.
    u201CAssuming that the following have been done and configured.
    1.A value table has been created in the ABAP stack of the WAS in which XI is running and the entries as the file types, which will be written into the files are maintained.
    not claer,can you explain bit more
    2.Create a number range object in SNRO transaction in the same ABAP stack which will be having the sub objects as the file types maintained in the value table with their number ranges maintained. u201C
    b) .Can we use all mapping techniques (ABAP, Java, XSLT and Graphical) in a single scenario if yes then how to trigger them and which one executes much faster?
    We can use all mappings single scenario,how mean just add the mapping names in Operation/Interface mapping.
    As per my understanding Message Mapping works faster then JAVA then XSLT then ABAP,but it depends on how many lined of code you written.
    c) .Can we trigger an RFC asynchronously and how?
    Yes we can use RFC Asynchronous,search in sdn you will find it,if unable to find let me know.
    Regards,
    Raj

  • Variable substitution for csv file

    Hi Guys,
    I am using Multimapping to generate 2 target messages and finally creating these 2 messges as csv files. But i need to use variable substitution (because dynamic configuration doesnt work in multimapping) to create the target files and i need to omit this node from content.  i know if it is fixed length file we can use variable substitution and finally we can cut the variable in content conversion by using below method
    fixedLengthToodShortHandling   cut
    Note:- I am using PI7.1
    thanks,
    madhu

    You must separate variable filename from the other fields in several nodes.
    Please, analyze if you can change your scenario, with next stucture:
    <ns0:MT_MadhuMulti xmlns:ns0="http://rr.unilever.com/bconepi13">
    <Strutcture>
    <Name>Syam</Name>
    <***>FEMALE</***>
    <ID>123</ID>
    </Strutcture>
    </Strutcture>
    <Strutcture>
    <Name>Syam1</Name>
    <***>Male</***>
    <ID>789</ID>
    </Strutcture>
    <nothing>
    <Filename>EmpDetails</EmpDetails>
    </nothing>
    </ns0:MT_MadhuMulti>
    And then in your CC:
    Recordset strucutre --> Structure,nothing
    Structure.fieldSeparator --> ;
    nothing.fieldFixedLengths --> 0
    nothing.fixedLengthTooShortHandling --> Cut
    nothing.endSeparator --> '0'
    Regards,
    Carme.

Maybe you are looking for