Dynamic number assignment for crm orders

Hello all,
i am looking for a userexit/badi in TX: CRMD_ORDER to implement a sales organization-dependent (dynamic) number assignment for transactions to meet R/3 requests.
Thanks in advance for your help.
Kind regards
Mark

Hi Kaushal,
thanks. I have already checked this badi. Unfortunately fm "CRM_ORDERADM_H_OBJECTID_DET_OW", where number assignment takes place, is called after this badi. According to SAP OSS there is no user exit avaiable.
Regards Mark

Similar Messages

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

Error occured in number assignment for object RESB

Hello all,
While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
How to solve this error?
Regards,
Sagar

In SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.

Internal number assignment for object AUFTRAG

Hello,
Previously with SAP PM module we had configured the maintenance work order number range for internal assignment to a narrow range of numbers i.e. 12000000 to 12999999.
Following rolling out the functionality to other sites, we required to extend the internal number range (to accomodate the volume to be produced) and have updated this in configuration i.e. 300,000,000,000 to 399,999,999,999.
We are now experiencing an information message each time we Save a new maintenance work order;
Internal number assignment for object AUFTRAG (numbers are in critical area)
Message no. RU 153
When the user clicks Enter to continue a warning message is also displayed on the status bar;
Number XXXXXX for order type XXX within critical area
Message no. CO 395
However, we have investigated this and the work orders are creating normally after this. We have created in the system, the work orders with the prevous number range and also hunders of work orders with the new number range, we do not appear to be experiencing our buffer.
I have check the settings in SNRO config setting. The settings appear as standard with a warning buffer of 5% and the No. of numbers in buffer = 20.
Please can anyone advise how to remove this information message or how to update the system to resolve.
Regards,
Hayley

The message is given by the number range function, according to the configuration of field percentage. You have entered 5% - which means when you reach within 5% of the end of the numbers, you should get the warning. Your range is 300,000,000,000 to 399,999,999,999 My calculation that you should get the warning around 395,000,000,000
I suspect that the issue is linked to buffering of the numbers. Is it resolved??

Internal number assignment for object

Hi Experts,
While creating PM order the error comes"Internal number assignment for object AUFTRAG"(numbers are in critical area).
I am not able to create order.
Please help.
Regards
Vishal

Hi Vishal
Your number range might have exhausted, you need to extend it through T-code SNRO. number range object (AUFTRAG). click numbr range button then change interval & extend the to number
shakti

External number range for Int Orders

We want to define statistical internal orders employee-wise. For each employee, we want to define statistical internal orders with the same employee number for monitoring the low-valued assets given to them.
My query is can we have external number range assignment for intrnal order type for this purpose ?

Hi Niki
The common practice is to Define the IO as the Employee No with a prefix of E.. It helps you to search the IOs easily as E*
If the employee is also given a Mobile phone, Vehicle, laptop etc and you wanna track all of them and book all such relevant expenses in the same IO, then use exit COOPA003.. You can add Z fields in the IO Master for Mobile, Laptop No, Vehicle no etc
You can also ask your ABAP team to create a search help (F4 help) based on these fields so that you can search the IO based on mobile no etc
br, Ajay M

Number range for Production order

Dear All SAP PP Gurus,
I am new to SAP PP and want to learn about number ranges for production order.
Can anyone tell me step by step procedure for creating & Assigning
number range.
Thanks in advance.
Regards.

Hi MIHIR,
I just chkd the blog spot of MR Siva.
It is very much self expalnatory.
Siva ,pls update more documents in ur blog,it is very much helpful
THNX all

Number Range for Transfer Order

Hi,
When I create transfer order with reference to outbound delivery, an error message says "Maintain number range 01 for transfer order". I could see the number range 01 maintained in T- code SDPI. But I would like to know how we maintain number ranges for transfer orders and why this error message has come?
Thanks,
Betty

Hi
In-img-logistics execution-shipping -pickinglean ware house management--define control paramaters and no ranges for lean warehouse management
1.Here you will define the control parameters for lean warehouse ( no ranges too)
2.Define no ranges
3. Assign no ranges
Please check have you maintained entries for your warehouse here if it is lean
In img----logistics execution-warehouse management-master data--define no ranges
T code OMLW if it is central warehouse
Regards
Raja

Number range for different order types

hi
pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
thanks and regards

Dear ,
Goto CO82 ,
1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
Revery back if u need any help
Regards
JH

Number range for Maintenance Order (IW31) - Any exit

Hi All,
I need to go for internal number overwite for Maintenance Order (IW31)for object AUFTRAG .
I am going to maintain ztable which contain order type and NRRANGENR.So,based on the ordertype i have to populate NRRANGENR in the exit.
Can you please tell me any exit or badi or through enhancement spot we can apply number range for maintenance order.
Thanks .
With Regards,
Ambrose

Hi,
Do you need an exit ?
You could create number range groups each with a specific number range. Then assign each order type to a particular group depending on which number range you want it linked to. If necessary have a different group for each order type.
Configuration can be done in transaction SNRO for object AUFTRAG.
-Paul
Moving to [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum (for PM/CS specific topics).

Number Range for production order / Planned order

Number Range for production order / Planned order depends upon what?
Plant, order type, mrp controller??

Dear,
Number Range for production order :- Client Specific assign to the order type You can check in CO82 and OPJH.
Planned order :- Plant specific OPPQ or OMI2. Number ranges for Manual creation - OMI3
Hope clear to you.
Regards,
R.Brahmankar

EDI Error : "Number assignment for ML document is incorrect"

Hi All,
We are getting the below error in EDI invoice generation.
"Number assignment for ML document is incorrect".
We have checked the number range for Material Ledgers. And the status is fine.
We are using EDI for Inbound invoice creation.
Can any body please guide us to solve this issue?
Regards
RS

Hi Srikanth,
The document types are assigned to the Parnter. But how will it be related to the Material Ledger.
We are getting the error while number assignment for Material Ledger Document.
Did we miss any settings are missing related to Material Ledger?
Regards
RS

Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

External Number gneration for process order creation

Hi,
I need to generate external number range for process order creation and at the time of goods receipt.
How can I do this in the include ZXVBZU02.
Regards
SAi

You might want to try search first:
http://www.google.com/search?hl=en&source=hp&q=externalnumberrangeforprocessordersite%3Asap.com

Internal Number Assignment for Object QMERKRUECK

Hi Gurus,
When I clicked on SMPL( sample calculation) in the Sample tab of the Inspection plan (QA02) I got the below Information error " Internal Number Assignment for Object QMERKRUECK (Numbers are in critical area).
Though we have enough number range why this Information error is coming? Couold you please explain the cause and how to avoid it?
Thanks in advance,
Shashidhar

Hi Shashidar,
Actually its gap
Reason: some times number ranges overlap or missing from the buffer data base system will happen very rarely.
in our QM module, below objects error chances may happen
- QLOSE      (Inspection lots in QM)
- QMEL_NR    (Number range - message)
- QMERK      (Confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Confirmation number of an inspection characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Quality control chart)
Read Notes 504875 and 678501.
Thanks
Shiva

Dynamic number assignment for crm orders

Similar Messages

Maybe you are looking for