Dynamic Repository Variables are not Refreshing in OBIEE 11.1.1.6

Hi Experts,
As of sudden the dynamic repository variables are not refreshing.
The same rpd is working fine in Test Environment.
If any change in the query of initialization block, it is fetching old result.
Even after refreshing in Analytics page, still it is showing old value.
Please help me in regarding this.
Regards,
Kallu.

Make sure init block is pointing to right connection pool.
whats the status in NQServer.log and NQQuery.log files?
If helps pls mark

Similar Messages

Regarding dynamic repository variable

Hi Experts,
I have made one dynamic repository variable. this variable calculates start date of week.
i am using this variable in prompt as default value.
the problem i am geeting its value is not getting refreshed. it shows static value that i have given in default initializer in
rpd.i want its value gets changed in every week but it is not changing,its shows always default value that have
given in rpd.
Please share any solution to resolve this problem.

Hi,
Kindly use the below SQL syntax in the default selection of the dashboard prompt.
SELECT CASE WHEN 1=0 THEN date_column else TIMESTAMPADD(SQL_TSI_DAY, -0, CURRENT_DATE) END FROM SH
Regards
MuRam
NOTE: Please mention if this resolved your problem/still facing and close the thread.

BICS_PROV_GET_INITIAL_STATE and form Variables are not submitted

Hi Team,
We are geting following error message while running WAD reports on BI QA and Test system portal.
Our issue is similar to the issue mentioned in SDN thread BICS_PROV_GET_INITIAL_STATE Exception
- We are facing issue in refreshed systems.
- Variable Entry Screen is displaying correctly.
- After entering values once you click on "OK" we are getting UNCAUGHT_EXCEPTION.
- Support Desk tool is displaying green.
- Same report is executing fine in Dev and Prod system.
- BI Queries are running fine on Portal
- Only WAD reports are giving exceptions
- Support desk tool is showing green for everything.
Error Message:
Exception in BI runtime
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program BICS_PROV_GET_INITIAL_STATE and form Variables are not submitted (see long text)
Log ID: 0018FE2D262B00A000000D68000032CA00047CFC82B5D87E
Initial cause
Message:
Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
Stack trace:
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:130) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:123) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:123) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171)
Please help me on this
Thanks,
Preethish

Hi,
Try filtering the queries with the values of variables entries included in the filters.
Then include them in WAD report. If that works fine then it can be a memory issue.

Multiple dynamic repository variable using one initialization block

I am trying to declare three dynamic repository variables var1, var2, var3. I want to have only one intialization block for all three.
The point I am confused at is when declaring vraibles, I can normally do
select x, y, z from table where expr1=expr2
and then x, y, z can give values to my three variables.
But in the above case the query is selecting three different things (different columns) from the same row in the database.
But in my case I want to select the same column from different rows.
for example
var1 will be
select x from table where expr1=expr2
var2
select x from table where expr1=expr3
and var 3
select x from table where expr1=expr4
1. Is it possible to do that.
2. Is it possible to dynamically name a dynamic repository varibale?
I use OBIEE-11g
Thank you
Edited by: user6287828 on Jan 26, 2012 9:41 AM

Hi,
I think the primary advantage of WITH clause is to resolve complex sub queries (I am sorry, I am mistaken here). But as per my readings and the BI Server too generating queries using WITH clauses, I think this is an optimized option to choose from in your case (I think there might be other queries too that can get your requirement solved though).
You may want to refer to http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:524736300346304074 for some info. The database experts say the usage is case-by-case and hence probably in your case if you want to populate 20 variables at one shot you in BI using this kind of query, you have to further evaluate the time taken by the sql etc or break it down again.
However, I think this certainly is an option here.
Hope this helps.
Thank you,
Dhar

ORA-01008 All variables are not bound

Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
Could anyone please insight ?
SELECT EQMT_INGT_LOG_ID, EQMT_ID,
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
FROM TOS_EQMT_INGT_LOG ingLog
where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
and eqmt_id in (select eqmt_id from tos_eqmt
where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
and SCAC = :scac
and STCC = :stcc
and SHPR_NAME = :shprName
and CNSE_NAME = :cnseName
and driv_id in (select driv_id from tos_driv where lcns = :lcns )
and driv_id in (select driv_id from tos_driv where sabv = :sabv )
and ingt_stat_ind = :ingtStatInd
and BUCK_SLIP_XML like :inspectedBy
ORDER BY INGT_DATE

Slightly off-topic but what do you think this does :
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

How can I get past the error message "Variables are not compatible DMB00"?

Hello,
I'm working in Desktop Intelligence XI and I'm using an Excel data provider and a universe data provider. I've linked the two providers on the common field "Cost_Code". The Excel data provider also has a "Cost_Code_Descr_xls" field so I've created a new variable that makes this description field a detail object associated with the "Cost_Code" dimension. This allows me to use both objects in the report.
Some of the cost codes in my universe data provider are not found in my cost_code Excel provider so I'm trying to create a simple formula to deal with these null values:
= if isnull(<Cost_Code_Descr_xls>) then "Unclassified" else <Cost_Code_Descr_xls>
This is where I get the "Variables are not compatible" error.
Any ideas on how to get around this error?
Thanks!
David

Hi David,
I might have been a bit to quick with just saying that the only thing you needed to do was replacing the object with the variable you created.
The variable is only compatible with 'Cost Code' dimension, but not with any of the other dimensions in the report. Your header probably only contains the 'Cost Code' dimension and as such the formula isn't giving any problems. But your details contain ohter incompatible dimensions.
What you need to do is also create detail variables for the other dimensions and relate those to the 'Cost Code' dimension. Use those newly created detail variables in your report.
Regards,
Harry

Process Context changes (.XSD) are not refreshed in the Task Mapping

Hello,
I'm adding new attributes to the .XSD but the changes are not refreshed in the mapping section of the tasks. How can I refreshed these changes?
Best Regards
SU

Hi,
You can manually reimport DO xsd by :
Your BPM Project > ProcessModeling > Data Types folder > XSD Files folder > Right click xsd file> Reimport.
You can manually reimport WS wsdl by :
Your BPM Project > ProcessModeling > Service Interfaces folder > WSDL Files folder > Right click wsdl file> Reimport.
Regards,
Unni

Queue alerts container variables are not getting filled

Hi All,
I am referring this blog to create alerts when message struck in queues
/people/santhosh.kumarv/blog/2009/05/19/sap-xipi-alerts-for-queue-errors
I am able to get the alert when a message struck in Queue of XI. But Container variables are not filled with actual run time values
I have used the report as it is and container variables as described in blog.
I have implemented Alerts for IE & AE alerts, those are looks good as expected.
Please let me know any clue
Regards

Hi,
After investigating all the things i found these
1) We have already Integration Engine & Adapter Engine Alerts configured in landscape with separate alert categories & working fine
2) Now i configured one more alert category for Queue error with the above mentioned Blog
Important thing: is even though if any error occurred on Integration engine, i get 2 alerts. one with Integration Engine alert category description & one more is with Queue alert category description
Reason for this is, for Queue alert category i selected radio button as "No Restriction". because of this if any IE error occurred also queue alert category is also triggering along with Integration engine alert category .
Please let me know is it possible to implement Queue alerts along with the IE & AE type alert categories
Any one implemented IE, AE & Queue alerts in single landscape
Regards
vamsi
Edited by: Vamsi Krishna on Jul 19, 2010 4:53 PM

Bind variables are not used in select statement

Hello all of you,
I have two parameters in Report 6i.
1) Department
2) Section
There are many section in a single department. Both parameters are selected from list. The list for department name is as follows -
select deptname from department_master order by deptname
It works very well. The value is stored in :p_dept_name.
I want to display section of selected department only using following code :-
select sectname from section_master a, department_master b where a.deptcode = b.deptcode and b.deptname = :p_dept_name
The value is stored in :p_sect_name.
But it does not work. bind variables are not allowed in select statement, then how can I do this???
Please suggest me.
Thanx,
Regards,

Vikas,
the forum is full of threads about that.
Dependent Parameters in Reports are possible out-of-the-box in Reports.
If you're running your report on the web, have a look at Metalink Note:185951.1
Regards
Rainer

Error: State cannot be saved as variables are not submitted in WAD (Portal)

Hi Gurus,
I am getting the following error :
After opening the report and selecing the free characteristics if I want to go back one screen by right click(context menu)-> Back->Back one Navigation Step it is throwing the following below short dump in the EP portal,please help ASAP:
The initial exception that caused the request to fail was:
Error: State cannot be saved as variables are not submitted
Currently I am on support pack 17.
Thanks to all.

hi sunita,
please check ur bi java pack,
BIJava patch SPS16p30 fixes the problem,
such problem can be solved by upgrading java patched.
hope it will help u.
thanks.

Some Out-Variables are not filled when one is missing (Oracle-Client 10)

Hello everybody,
we have a problem in our applications, written in C++ using OCI.
All works fine with Oracle Client 8 and 9, the problem occurs when using Client 10.
A simple example:
select 1, 2, 3, 4, 5 from dual;
I have 4 out-variables, the 3rd one is missing:
OCIDefineByPos(..., 1, &out1, ...);
OCIDefineByPos(..., 2, &out2, ...);
OCIDefineByPos(..., 4, &out4, ...);
OCIDefineByPos(..., 5, &out5, ...);
When executing with Oracle Client 8 and 9, the result is:
out1 = 1
out2 = 2
out4 = 4
out5 = 5
Executing the same with Oracle Client 10, the result is:
out1 = 1
out2 = 2
out4 = 0
out5 = 0
When there is a selected column without a variable for it, all following out-variables are not filled. Can someone repeat and / or explain this? I read the Oracle Docs for the OCI 10, but nowhere is a hint about differences or changes in this behaviour. I know that when selecting a column I should spend an out-variable for it, but nobody is perfect.
Here are some details:
Oracle Client 10.2.0.1.0
Client OS Windows XP SP1
Oracle Database 10g Release 10.2.0.1.0
Application developed with Visual Studio C++ 7.1
Thanks for any help.
Torsten
Here's the code, I changed the simple OCI-example from the Oracle homepage:
void ocitest()
static text username = (text ) "xxx";
static text password = (text ) "yyy";
static OCIEnv *envhp;
static OCIError *errhp;
static sword status;
sword out1, out2, out3, out4, out5;
sb2 ind1, ind2, ind3, ind4, ind5; /* indicator */
static text maxemp = (text ) "SELECT 1, 2, 3, 4, 5 FROM dual ";
OCISession authp = (OCISession ) 0;
OCIServer *srvhp;
OCISvcCtx *svchp;
OCIStmt stmthp, stmthp1;
OCIDefine defnp1 = (OCIDefine ) 0;
OCIDefine defnp2 = (OCIDefine ) 0;
OCIDefine defnp3 = (OCIDefine ) 0;
OCIDefine defnp4 = (OCIDefine ) 0;
OCIDefine defnp5 = (OCIDefine ) 0;
(void) OCIInitialize((ub4) OCI_DEFAULT, (dvoid *)0,
(dvoid * (*)(dvoid *, size_t)) 0,
(dvoid * (*)(dvoid *, dvoid *, size_t))0,
(void (*)(dvoid *, dvoid *)) 0 );
(void) OCIEnvInit( (OCIEnv **) &envhp, OCI_DEFAULT, (size_t) 0,
(dvoid **) 0 );
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &errhp, OCI_HTYPE_ERROR,
(size_t) 0, (dvoid **) 0);
/* server contexts */
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &srvhp, OCI_HTYPE_SERVER,
(size_t) 0, (dvoid **) 0);
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &svchp, OCI_HTYPE_SVCCTX,
(size_t) 0, (dvoid **) 0);
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
/* set attribute server context in the service context */
(void) OCIAttrSet( (dvoid *) svchp, OCI_HTYPE_SVCCTX, (dvoid *)srvhp,
(ub4) 0, OCI_ATTR_SERVER, (OCIError *) errhp);
(void) OCIHandleAlloc((dvoid *) envhp, (dvoid **)&authp,
(ub4) OCI_HTYPE_SESSION, (size_t) 0, (dvoid **) 0);
(void) OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_SESSION,
(dvoid *) username, (ub4) strlen((char *)username),
(ub4) OCI_ATTR_USERNAME, errhp);
(void) OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_SESSION,
(dvoid *) password, (ub4) strlen((char *)password),
(ub4) OCI_ATTR_PASSWORD, errhp);
checkerr(errhp, OCISessionBegin ( svchp, errhp, authp, OCI_CRED_RDBMS,
(ub4) OCI_DEFAULT));
(void) OCIAttrSet((dvoid *) svchp, (ub4) OCI_HTYPE_SVCCTX,
(dvoid *) authp, (ub4) 0,
(ub4) OCI_ATTR_SESSION, errhp);
checkerr(errhp, OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &stmthp,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0));
checkerr(errhp, OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &stmthp1,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0));
checkerr(errhp, OCIStmtPrepare(stmthp, errhp, maxemp,
(ub4) strlen((char *) maxemp),
(ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp1, errhp, 1, (dvoid *) &out1,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind1, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp2, errhp, 2, (dvoid *) &out2,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind2, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
/* checkerr(errhp, OCIDefineByPos(stmthp, &defnp3, errhp, 3, (dvoid *) &out3,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind3, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));*/
checkerr(errhp, OCIDefineByPos(stmthp, &defnp4, errhp, 4, (dvoid *) &out4,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind4, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp5, errhp, 5, (dvoid *) &out5,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind5, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
/* execute and fetch */
if (status = OCIStmtExecute(svchp, stmthp, errhp, (ub4) 1, (ub4) 0,
(CONST OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT))
if (status == OCI_NO_DATA)
else
checkerr(errhp, status);
void checkerr(OCIError *errhp, sword status)
text errbuf[512];
sb4 errcode = 0;
switch (status)
case OCI_SUCCESS:
break;
case OCI_SUCCESS_WITH_INFO:
(void) printf("Error - OCI_SUCCESS_WITH_INFO\n");
break;
case OCI_NEED_DATA:
(void) printf("Error - OCI_NEED_DATA\n");
break;
case OCI_NO_DATA:
(void) printf("Error - OCI_NODATA\n");
break;
case OCI_ERROR:
(void) OCIErrorGet((dvoid *)errhp, (ub4) 1, (text *) NULL, &errcode,
errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
(void) printf("Error - %.*s\n", 512, errbuf);
break;
case OCI_INVALID_HANDLE:
(void) printf("Error - OCI_INVALID_HANDLE\n");
break;
case OCI_STILL_EXECUTING:
(void) printf("Error - OCI_STILL_EXECUTE\n");
break;
case OCI_CONTINUE:
(void) printf("Error - OCI_CONTINUE\n");
break;
default:
break;
}

Use int/long instead sword .

Values of Formula Variables are not determined

I have created a Purchase Order for services where the quantities for services line items are determined on the basis of predefined formulas. Values for all the variables are provided in PO and quantity is calculated on the basis of those values. When I try to adopt the services during the creation of Service Entry sheet with reference to PO, system shows the below error message:
Please enter a value for variable(s) NO OF PERSONS (Form.Val.1)
Message no. SE252
Diagnosis
You wish to have the system determine the quantity using a formula but have not entered any values for the variables in the formula.
Procedure
Maintain the values of the variables.
Example
For example, in a formula for calculating a volume, specify the values for the variables "length", "width", and "height".
The values of formula variables are not adopted from the PO. Please suggest the solution or possible cause of error.

I have gone through the note you suggested. But in my case each variable is created with specific name and assigned to the formulas.
The formulas are getting adopted in RFQ but not in service entry sheet.
Edited by: abapuser on Dec 21, 2010 6:46 AM

OBIEE repository variable CURRENT_ENTERPRISE_QUARTER not set

Hi,
We have a trial on-premise instance of Fusion Sales. The embedded OBIEE reports are not retrieving results because of the filters CURRENT_ENTERPRISE_QUARTER and
CURRENT_ENTERPRISE_YEAR pointing to 2011.
Could someone please advice in detail how to get these variables set correctly.

Found the root cause of this issue. The accounting calendar created in the system started from 2012. I created another accounting calendar which included 2011 Q2 and set it as CRM common calendar. Waited for the BI refresh and checked the seeded reports. They the current_enterprise_year value changed.
Refer the support document for the steps:- Doc ID 1602167.1
Giving the excerpt from the above document
1) Navigator > Setup and Maintenance >Manage Accounting Calendar
Create a new calendar including Year 2011 and Q2 (Second quarter)
2) Navigator Manage Calendar Profile >CRM Common Calendar (ZCA_COMMON_CALENDAR')
> Assign the new calendar (commonly at Site level) instead of former one
> Save and Apply
3) Navigator > Sales Dashboard > Open dashboard with new seeded reports : data and figures are displayed now

Init Block for Dynamic Repository Variables

I have defined an Init Block in the RPD. I see that you can set the refresh intervals via a schedule that is a set time. I want to be able to trigger this Init Block once my ETL process has completed. Is there a way to externally trigger the Init Blocks ?

We faced the same problem and I am sorry to say that OBIEE does not support this feature. There is no way to trigger a repository variable refresh from outside OBIEE. In the end we decided to set the refresh interval to 2 mins. This means that when new data is loaded then at most the variables will take 2 mins to refresh. We use repository variables to to store the latest business date our DWH has data for to drive dashboard and reports. Our Init Block query is very quick and while are constantly asking the DB the same query Oracle caches it's results so the bverhead is near to nothing.

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Dynamic Repository Variables are not Refreshing in OBIEE 11.1.1.6

Similar Messages

Maybe you are looking for