Dynamic selections in Report category

I am trying to create a dynamic selection view for a report category, while doing so i am not able to add any table to table dialog that appears, when i enter PA0001 it says PA0001 is not a table. Same problem for any table i try to insert.
Can anyone help me with a solution.
Thanks in advance.

In transaction SE80, i selected "edit object" button -> in the screen that pops-up i selected the tab "more"
In that tab i selected radio button "Selection View" and then selected create button
Then "Create Selection View" screen appears, there i selected CUS View, checked radio button "for any tables" and gave a name of view 'ZTEST' and pressed the continue button, A screen appears to enter tables, when i enter any table it gives the message Table not found.
When i try in other systems it works, not sure of the problem in our dev system.
Thanks,
Thirumal

Similar Messages

'Plant Location' field in dynamic selection of report

Hi Experts,
I have entered some value in plant location in WBS org. data tab and want to filter the report by giving this field in dynamic selection of reports. But this field is not availble in dynamic selection. how we can add the same, even this is standard field in PRPS table (PRPS-STORT). Pls help.
Regards
Dinesh Chauhan

In standard SAP this field is not set for dynamic selection
you can create your customer view with STORT activated or you can change the STD view
SE36
enter PSJ as logical database
go to menu path (in that same screen)
Extras -> selection views
this will default to CUS (short for CUS view)
change this to SAP and change button
In the table node section scroll down till you come to table PRPS_R then double click on that
in the table field section below enter B2 next to the stort field (you may to scroll) - this means that this will now be visible in the org unit section for WBS in dyn selection
save etc and then re try

Dynamic Selection on report not working

Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
Nas

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

Dynamically select detail report for a master report link item or button?

I'm still new to APEX, so apologies if this sounds like a stupid question, but so far I can't find anything online about how to do the following.
I have a simple report, and I want to be able to drill down from here to a detail report via a link item (or a button) in each row. The problem is that the specific detail report to use depends on a combination of values in the parent record.
So if I have a parent record in the master report with values for columns 1/2/3 of A/B/C, I would drill down to a detail report against table X. If my parent record has values of D/E/F, I might drill down to a different detail report against table Y.
I can build the individual reports easily enough, and I can set up a link item in the master report to drill down to a hard-coded detail report page. I can even generate the name (alias) of the relevant target report as an extra non-DB item in each row of the parent report. But I can't figure out how to allow each row in the parent report to actually link to a different detail report dynamically, depending on the contents of the parent row.
Can anybody suggest an easy way to do this, or point me towards an online resource that would explain how to do this (preferably in basic terms that this APEX-newbie can understand)?
Thanks for your help!

Hi,
When you say "Detail report" do you just mean a normal report of the child records for the selected master record or a tabular form style "Details report"?
Using different reports on a page would, typically, depend on the value in a hidden page item - for example, P1_REPORT_TYPE. Your link could pass an appropriate value into this item and the second page would then use this as a Condition for each of the report regions - each region being conditionally displayed when the hidden item is a specific value.
Andy

Dynamic Selection of Report Column Format

Is it possible to dynamically set the number format on a report column? I thought it would be as easy as setting the 'Number/Date Format' to a session state variable such as &NUMBER_FORMAT. However, when I tried this the column returned the following value ##########.
Any ideas?
Thanks,
David

OK, this is a favorite hack of mine combined with Sergio's suggestion. Essentially, we select the column twice, display it with one column using Sergio's idea and sort it on another hidden and unformatted copy of the column (hope I didn't lose you yet):
1) Add another column of the same source to the query and give it an alias:select ename,to_car(sal,'&NUMBER_FORMAT.') sal,sal sal_sort
from emp2) Edit the report > report attributes > sal_sort column attributes. In the HTML Expression field, type #SAL#.
3) On the report attributes page, unclick the "Show" column for sal.
Now you are displaying the SAL column in the SAL_SORT column allowing the reporting engine to properly sort the column based on the unformatted SAL_SORT. I use this technique a lot for quarters. I'll show Q105, but it's sorting on an actual date behind the scenes.
Happy hacking!
Tyler

Automate dynamically selected Discoverer report Export/Import

hello,
I have a situation where in I need to export newly created reports and import them back again after cloning.
eg: user will create report in dev1 instance. This instance will get daily refreshed from prod. But we do not want to loose these reports after cloning of DEV1.
Query that we wil use to select reports is :-
select *
from eul5_documents
where doc_created_Date between (sysdate -1) and sysdate;
This is daily activity and hence has tobe automated.
Quick reply will be appreciated.
Thanks.

Hi
In theory, your idea is sound. However, if your have any sharing of reports then these could be lost using your method as you will lose any that have been shared today.
Why don't you use Discoverer's in-built export | import capabilities via the Admin tool? This way you can be guaranteed to get everything right. You could use your SQL to detect workbooks that have been created during the day and then take those names and use the Admin tool to export them. Following the refresh from Production you could then import them.
Best wishes
Michael

Dynamic seleciton in report variant FBL1N

Hi,
Problem Description
I am trying use dyanamic selection in report variant of FBL1N but its not working.
My working
I am using dyanamic date variant.
In the selection screen of FBL1N, we have posting date in dynamic selections.
While creating a variant for the selection screen of FBL1N, I am selecting Posting Date of dyanamic selection and choosing selection variant as "D" (D: Dynamic date calculation) along with Current Date as variable.
However system is not accepting this and the current date is not coming up while choosing this variant.
Solution required
Can anyone please help me out with dyanamic date calculation in dates from dynamic selection in report FBL1N.
Thanks,
Nitish

Dear
You did not specify in which version you are working. If you are in new GL instead of using FBL1N you can as well use T.Code S_AC0_52000888 and here you can make dynamic selections.
Regds

Dynamic Selections in FBL5N

Hi All,
We are facing a problem while using the transaction FBL5N (Customer line item display) along with its dynamic selections. Along with the existing selections we would like to include the payment terms in the selection criteria which is available in the company code data of the dynamic selections.
The problem is even if we use this there is no effect on the report i.e. the data is not filtered (Say I have chosen not to get payment terms with a value 'XYZ' but the report is displaying these..). But at the same time if we use the document date in the dynamic selection, the report is working fine, the extracted data meets the selection criteria.
Can somebody help us out here, if we have to include some notes or any LDB's which might help us?
Thank You.
Rgds,
Narendra

Thanks Julius....
Moving it to the top...would help if anyone can provide some info about this....
Rgds,
Narendra
Edited by: Narendra Daka on Jan 1, 2009 4:19 PM

OBPM4 - Variant with dynamic selection

Hi Experts,
I'm using the FBPM transaction (report SAPFPAYM). I have created the variant in OBPM4, in the variant I have insert the dynamic selection for Value Date.
When I run the report SAPFPAYM, the report does not work. If I delate this dynamic selection the report works correctly.
Could you help me?
Thanks in advance.
Regards
Giampaolo

Hi Jyothi,
I have inserted in the variant the dinamic variant selection "Value Date" or only a value date:
When I run the report I have this message:
"No Payment Media Created in Format FR_ETEBAC_VRT-ETR
Message no. BFIBL02159
Diagnosis
No payment media were created for format FR_ETEBAC_VRT-ETR for payment group
100"
If I delate the value date or value date dinamic parameter, the report works correctly.
Do you have any suggestion?
Thans a lot
Kind Regards
Giampaolo

How to create dynamic view in hr report category

i want to make company code mandetory in in selection screen given by logical data base PNP here i want to make field mandetory. so how to create dynamic view in hr report category.
thanks in advance

solved by self

LDB/Report Category/Selection view

Hello,
I have a requirement to add a field onto the standard selection of the program PC00_M99_CWTR.
The field I need to add is PA0031-RFP01 (Reference personnel number). Can this be added??
I have been told that I can add this field to the dynamic selection screen by changing the fields
behind the logical database PNP. However, when I go into SE36 and enter the SELECTION VIEWS
option choose PNP and SAP STANDARD to display the system replies with 'The selection view does
not exist' ?????
How can I add fields when I can't see the SAP standard one to copy from.
Or should I be changing the reporting category.
Any help much appreciated.
Thanks
Andy

Thanks Rob.
Just wanted to know if it was possible or not. Sometimes with SAP it says you can do
something to the SAP standard and then you have to go and create a custom copy
having spent many hours in the first place!!
Andy

Problem in dynamic selection in vendor balance report tcode S_ALR_87012082

Hello Friends,
After upgrading from 4.7 to ecc 6.0 we are facing the below mentioned problem.
In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit the requirement. We have only, vendor master and company code in the dynamic selections.
Is there any customization tht needs to be set???
Thanks,
Sunny

Hi Vas,
I am not sure..... but you can view the details in "S_ALR_87012079", you need to chnage the layout....
If the hint is useful Say thanks by reward.
Regards,
Prabhu Rajesh

Submit report with dynamic selections

Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
      trange_line LIKE LINE OF trange,
      trange_frange_t_line LIKE LINE OF trange_line-frange_t,
      trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
      texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign   = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low    = '1987'.
trange_frange_t_selopt_t_line-high   = '1987'.
APPEND trange_frange_t_selopt_t_line TO   trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    field_ranges = trange
IMPORTING
    expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
                WITH SELECTION-TABLE rspar_tab
                WITH FREE SELECTIONS it_texpr
                and returN.
Kindly provide your inputs
Regards
Reshma

Hi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
          g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = g_repid
      mode_write_or_move = 'M'
    importing
      p_trange           = trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand

How to show the columns dynamically in OBIEE report based on the selection?

Hi,
I have a requirement where the columns should be dynamically shown in report based on what we select in propmt page.
I'm creating a report in OBIEE where i want to give an option to the end user to select the columns whichever he wants to see in the report.
For example I have the following columns in the report already:
Customer Name,
Customer Number,
Bank Account,
Address
I want to give an option to the user to select 'Customer Mail ID' dynamically and see the column to be displyed in the report along with the existing columns.
Through 'Column Selector' user can select a single column at a time, but if he want to select more than one column, how can we do this ?
Please help me out in resolving this issue.
Thanks,
Chaithanya.

Hi Chaithanya,
there's not a straight solution for this. You can create different analysis containing different number of columns and then directing the user to this analysis using Action Links or you can also use View Selector to switch from one view (analysis) to the other. But it's not going to be very flexible nor dynamic.
J.

Selection-screen using HR report category

Hi friends,
I have a developed HR report using PNP ldb in which i have used the HR report category to specify my selection-screen.But still my requirment is not getting fullfiled.I require 1)Company Code
2)Payroll Period selection block also.
But even if i dont enter value in this payroll area it should excecute.As of now it throws an error message saying "No valid payroll area specified"
I want to generate report for any month given in other period of the payroll Area wrt company code.

As per your question, remember that, the period will be different for each and every Payroll area.May be same period will behave differenly like weekly, monthly, semi-monthly.. with different payroll area.
So the parameter payroll area will always be mandatory..

Dynamic selections in Report category

Similar Messages

Maybe you are looking for