Dynamic Subtotal that includes Local Member in sum
Hi,
I have a dynamic report that i have separated into sections using blank local members. Now within one of these groups is a local member row that is an EPMRETRIEVEDATA function that is pulling some other data. Finally, I have a repeating subtotal local member that totals the values for each group of cost centers.
My issue is that the SUBTOTAL local member won't include the EPMRETRIEVEDATA local member in the sum.
It doesn't matter if I use sum of EPMSELECTEDMEMBERS or EPMALLMEMBERS. Of course, I can code in the excel reference but then the subtotal isn't dynamic and the reference will be incorrect if the report expands.
FYI, in the attached picture, the highlighted row is the local member with EPMRETRIEVEDATA and the row below in bold is the SUBTOTAL.
Any help with this is much appreciated!
Edited to add more recent picture. Thanks!
Another tricky option is:
Subtotal member formula:
=SUM(EPMSELECTEDMEMBERS(SOMEDIM))+INDIRECT(ADDRESS(ROW(EPMSELECTEDMEMBERS(SOMEDIM))+ROWS(EPMSELECTEDMEMBERS(SOMEDIM)),COLUMN(EPMSELECTEDMEMBERS(SOMEDIM))))
During local member processing EPMSELECTEDMEMBERS(SOMEDIM) will be replaced with the range of normal members and INDIREC(ADDRESS(... will compose the reference to cell just under this range.
B.R. Vadim
Similar Messages
-
I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.
Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal; -
How to make row number in local member dynamic
I have create multiple local member and the formula I the local member is such as
=SUM(row11+row14+row16)
then I add another couple of row before row 11, now the formula should be:
=SUM(row13+row16+row18)
anybody know is there a way how to make the formula in the local member dynamic, which means that if I add rows of drop rows, the formula in local member will automatically change?Hi Jian,
You can create local my by "Activate Local Member Recognition", but make sure "Use Position in axis" should be unchecked.
Also make sure you have added all required Local members before any insertion of rows.
Hope this should work.
Thanks,
Rishi -
iCloud says that it will merge all my calendars on my iPhone. Does it means that eaven calendars, ea Google, will be included? Or does it means that only "local" calendars will merge?
Welcome to Apple Support Communities
Only local calendars will be merged with iCloud. Your Google calendars won't get modified -
Error msg is generated when attempt to crop a TIF that included a 3rd party filter not on
local machine. (Windows 7 Professional SP1)
1. File created in CS5 with third party filter applied to smart object (filter:Neat Image
published by ABSoft.)
2 Transfer to another computer that does not have the filter installed.
3. Open in Photoshop CS6.
4. Use crop tool to attempt to crop the photo.
5. Receive error message "Could not complete the command because of a program
error."
6. Crop completes and can be saved, but filter is disabled and cannot be enabled unless
moved back to original computer.
Expected result should be:
Allow filter to be enabled as CS5. Or message similar to message produced with
missing font.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer,
SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 1995 MHz
Built-in memory: 6051 MB
Free memory: 2949 MB
Memory available to Photoshop: 5290 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 540M/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 1
Video Card: NVIDIA GeForce GT 540M
OpenCL Unavailable
Driver Version: 8.17.12.6744
Driver Date: 20110301000000.000000-000
Video Card Driver:
nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GT 540M
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\wayne\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 450.2G, 387.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64
Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012
18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build
gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build
gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;
BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112
0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONESee if you can troubleshoot Safari extensions and third party plugins before Safari crashes.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
Hi BPC Experts,
We have migrated our environment from BPC 7.5 to BPC 10. We have also migrated our reports from EVDRE to EPM.
Now we have few reports where local members are used.
The report is buil up like this -
Entity in columns and account in rows.
We have created blocks in the report to show the grouping which is general while creating balance sheet or P&L report.
Local members are created to show the total at the bottom under each group. For ex.,
Cash account is a node we have in report.
Structure in account dimension -
Cash
A_100
A_123
A_124
B_100
B_123
B_124
C_100
C_123
C_124
In report, we have -
CASH
Current Assets
Investments
Fixed Assets
Total Assets - =round(sum(all four above),-3)
Now the total asset is local member here.
When we drill down on CASH, it generates additional members in the report (as shown above). The local member does not go down on drill down.
When we drill down on any parent node, we expect that local member should also get drilled down and show the correct value. However, this is not happening.
Could you please share some light on how to make local members dynamic with drill down on parent node?
We are on SP14 patch with .Net4.
Best Regards,
Ashwin.Hi Vadim,
We managed to get the local member in our report, however, when we drill down on the last member, the local member stays at its current position and does not follow the drill down sequence.
The members in the row axis of the report are hardcoded and column axis is dynamic. We also have few blank lines in the report.
Let me explain you that with screenshots.
We have 3 dimensions in rows and 1 dimension in column.
This is how the report looks like with ABC being a local member.
This is how our local member is set up.
When we drill down on member A_110, the local member does get drill down, but the CASH and R_All members get attached to this local member. This is how report looks like after drill down.
We need to have atleast 5-6 local members in the report.
How do we overcome this problem?
We tried inserting blank member, however, the results are the same after drill down.
Please help.
Best Regards,
Ashwin. -
BPC MS EPM SP 17 Patch 2 Local member returns #DIV/0! error
All,
I am working with EPM MS for BPC and All of my local formula works.
But some times when there is no value in the forecast or budget, the rows come back with #DIV/0! error.
The problem is #DIV/0! in the report.
What I have Done
The formula I am using is
=EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[BUDGET])/EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[ACTUAL])/100
It Should be
I tried using IF and ISERROR formula like below and it dose not work.
=IF(ISERROR(EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[BUDGET])/EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[ACTUAL])/100),"",EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[BUDGET])/EPMTUPLE([TIME].[H1].[2014.Q1];[CATEGORY].[H1].[ACTUAL])/100)
Anyone came across this problem and how did you solved it? I do not want to use local excel formulas as it is not an option to what I am trying to do.
Thanks your for your help.
SuArnold,
Thank you for your response, The EPM and Excel function does not seem to work together.
The basic Excel function would work however that is not an option in my case, I have to use EPM function as EXCEL function local member static with location formula.
If there is a way to make excel function dynamic please advise.
I tried every which way including your suggestion, It is odd that EPM function gives EXCEL errors or has no options to turn them off.
I was hoping there is a way to use EPM and not return any errors.
Su -
Avoid local member from shared row axis report
Hi,
I have developed reports, and shared onereport with default report with row axis,
when i merge the two report the local member applicable to the another report which will i don't required the formula.
but one report don't need sum function at the end of the reach column. Row axis is dynamic.
ex:
total.2012
total.2013
total.2014
account_1
34
account_2
144
total
178
not need the sum
not need the sum
Regards.
suryaYou can use the EPMFormattingSheet sheet to clear the intersection of the local member Total and Time.Year <> 2012
You must use the Multiple Selection functionality, follow this steps:
1) In section Dimension Member/Property Formatting, section Column click the button Add Member/property
2) Select tab Property Selection, select dimension: TIME, property: YEAR, operator: <> and value: 2012. Then click the button "Add to Multiple Selection"
3) Select tab Specific Selection, select Local Member option and enter the name of the local member, in this example is LocalMember000.Then click the button "Add to Multiple Selection"
4) Select tab Multiple Selection Overview to validate the previous selections.
5) Click OK
6) Check the option Apply
7) Change the conten of the cell with the formula =""
8) In columns Use change the value "All" to value "Content"
Hope this helps. -
Acrobat 9 - how do you create a dynamic stamp to include the current date (java script)
I have seen my question multiple places and times but the resolutions provided have not worked for me.
I am running Acrobat 9 Pro, cannot run X or XI due to the use of ProSystem fx Engagement.
I want to create what I thought would be a simple stamp. My initials and the current date. i.e. "crm 01/10/13".
Simple right? I created a PDF of my initials. Now I just need the text field with the proper Java Script to insert the date, correct?
I have tried opening "Dynamic.pdf" and copying and pasting the text field that includes the Java Script:
" event.value = (new Date()).toString(); AFDate_FormatEx("h:MM tt, mmm dd, yyyy"); "
The date does not update, it stays static.
I have manually entered the Java Script.
I have edited the Java Script to remove the "Ex".
I have edited the Java Script to revise the "yyyy" to "yy".
I have edited the Java Script to remove the " h:MM tt, " trying different formats to get "dd/mm/yy".
I have selected "Use single-key accelerators to access tools" in Preferences/General.
I have tried PDF files, PNG files. I have created the image files from Word and Excel.
I am at my wits' end. Can someone PLEASE assist me to resolve what should be a simple issue (I hope).
Thank you in advance.Thank you for your response.
Your script works well, but I still have the same issue. The date is remaining static to the system date when the stamp is created. My initial idea was to create a pdf of my initials "crm" and then add the text field with the java script for the date behind my initials. "crm" + (TEXT FIELD with JS). I wanted 3 stamps, red, blue and green. The colors correspond to specific processes in our workflow.
Your script adds my initials as well as the date.
My machine is running Windows 7.
My stamps are located:
C://Documents/Acrobat Stamps/...
Acrobat templates:
C://Program Files (x86)/Adobe/Acrobat 9.0/Acrobat/plug_ins/Annotations/Stamps/ENU/...
I have no problem creating stamps, just a stamp that will use the current system date. I HATE using the typewriter for my initials and the date. I guess I can stamp my initials and then type the date...but what is the point?
Do you have any further thoughts or suggestions?
Thank you very much.
crm 01/11/13 -
Dynamic Page that calls DB procedure to update data gets PLS222 or PLS306
This seems a bit odd to me: I'm getting either "procedure no in scope" (when I call a procedure with the right args) or "wrong # or type of arguments" (when I call it with the wrong ones, so it is checking the procedure) in a dynamic page.<P>
I'm trying to build a dynamic page that will display data and checkboxes (basically to get around the multi-select limitations -- management has told me that the "fake" md form is not acceptable)<P>
So I build the page, it displays the data just fine exactly as we want it to:<P>
<HTML><FORM><ORACLE>declare
p_mdoc_user portal.wwv_utl_api_types.vc_arr;
p_mdoc_user_seq portal.wwv_utl_api_types.vc_arr;
p_seg_id portal.wwv_utl_api_types.vc_arr;
p_cb portal.wwv_utl_api_types.vc_arr;
p_action varchar2(20):='Save Changes';
begin
htp.p('Select your segments');
htp.p('< p>');
htp.p('<table border=2 cellpadding=2 cellspacing=0>');
htp.tablerowopen;
htp.tableheader('Seg#');
htp.tableheader('Included');
htp.tablerowclose;
for r1 in (select seg_id, build_seg
from web.mdoc_create_seg
where mdoc_user = :mdoc_user
and mdoc_user_seq = :mdoc_user_seq)
loop
htp.p('<input_type="hidden" name="p_mdoc_user" value='||:mdoc_user||'>');
htp.p('<input_type="hidden" name="p_mdoc_user_seq" value='||:mdoc_user_seq||'>');
htp.p('<input_type="hidden" name="p_seg_id" value='||to_char(r1.seg_id)||'>');
htp.p('<tr><td>');
htp.p(r1.seg_id);
htp.p('</td><td>');
if r1.build_seg='TRUE' then
htp.p('<input type="checkbox" name="p_cb" value="Y" checked>');
else
htp.p('<input type="checkbox" name="p_cb" value="Y">');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('< p>');
/*note, this is where I'm putting in a procedure call to update*/
end;
</ORACLE></FORM></HTML><P>
so then I try to add the procedure call (where the sql*plus comment is above)<P>
htp.p('<input type="button" value="Save Changes" onclick='||
mdoc_seg_create_choice_p(
p_mdoc_user,
p_mdoc_user_seq,
p_seg_id,
p_cb)
||'>');<P>
When I try to run as portlet, I get pls 222 not in scope. <but>
When I take a value out (say remove the last ",p_cb") - I get pls 306 wrong number or type of args to call.<P>
I've granted the procedure and its underlying tables to portal/public/and portal_public, even though I'm building the dynamic page under a DB provider that is the same as the schema I wrote the procedure in.<P>
I've tried specifying the schema, using a public synonym, and putting it in a package: same thing occurs, either I get pls 00222 not in scope when I call it with the right columns, or if I purposefully leave one out I get PLS 00306 wrong # or type of args.<P>
Any ideas?
-MikeHi guys
Check out the last 2 posts in this thread for ideas on how to implement 1.
Report on user data from LDAP
Varad -
SAP Standard Report: Trial balance that include trading partner
Good Morning Guru's-
To avoid creating a custom report, does anyone know of a standard SAP report trial balance that includes trading partner?
Thank you.
Points will be awarded promptly!Hi
You can use Trading partner in the selection screen but not in the output in standard reports
If you populate Trading partner in the dynamic selection, output you will get only specific to that trading partner
Reg
Vishnu -
Is a Dynamic DNS Service included in my FiOS Bundle?
I have the FiOS TV, Phone & Internet Bundle (internet upgraded for $5 extra for faster speeds) and switched from Cable.
I know that Cable provided all of their Boost internet premium speed customers with a bundle of goodies, including a Dynamic DNS service.
Does Verizon offer Dynamic DNS service included as well?
If not, which is easiest to use (I have a Mac running OS X 10.5.7)
I noticed that my FiOS Router Firmware has Dynamic DNS section, but it's very unclear as to if it is meant for a Verizon specific service or a third party service.
Please advise; thanks!
--> Screenshot of Verizon Router Firmware screen - click here.
Message Edited by FireFish on 06-02-2009 01:22 AM
Message Edited by FireFish on 06-02-2009 01:22 AMThat screen you captured is where you would enter your dyndns.org account info and thereby get dynamic dns running on your setup.
It's not really accurate to say the service is 'included' in the bundle, it's just that the router is capable of talking with this 3rd party service - most routers can do so nowadays. -
Can not add "Local" member in Planning application
Hi,
I have added currency dimension as a user defined dimension and would like to add "USD" and "Local" members as its children. But i can not be able to add "Local" member as planning is throwing an error: "Member Name with "Local" already exists".
i checked across all other dimensions and nowhere i defined a member name or alias as "Local". Any guess ??
Thanks,
PraveenHi,
When i looked into planning app relational schema, i see that both "USD" and "Local" are already been defined under HSP_XCRNCY. My planning app is not a multi currency app so i would still need to add "USD" and "Local" as members of currency dim. is there anyway i could get it done ?
thanks,
praveen
Edited by: user651476 on Mar 21, 2013 10:59 PM -
How to include local chains into meta chain
Hi Experts,
Could any one pl help me how to include 3 local chains in to a meta chain.
first i am creating local chains
Thanks in Advance
Nitya
Please check the forum before posting
Edited by: Vikram Srivastava on Sep 24, 2010 4:43 PMHi Nitya
Nothing much to explain about it but any ways
First create separate chains for all 3 local chains and create a meta chain include all this 3 in that
Meta Chain steps:
If the chains are dependents on each other then create as below
Start process -> local chain1>local chain2-->local chain3.
If the chains are independent loads then
Start process ---> local chain 1,2,3 place it in parllel.
Precaution: ensure that you local chains start process should place the maintain process radio button set to "Start using meta chain or API".
Please find the help link for the same : [Creating process chains and schedules|http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm]
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
H. Nitya wrote:
> Hi Experts,
>
>
> Could any one pl help me how to include 3 local chains in to a meta chain.
> first i am creating local chains
>
>
> Thanks in Advance
>
> Nitya -
Include Local Chains with Meta Chain
HI folks,
How to Include Local Chains with Meta Chain. Can I know the step by step with clear information?
If it is possiable send step by step creation screen shots.
Thanks & regards,
venkat vanarasiHi Venkat,
Goto RSPC->Double click the process chain that u want to include local chain -> click the process types->Under General serverices u can see->Local Process Chain -> Select the process chain that u want to include ->include it, activate and schedule.
Hope it will work..!!
Assign points please..............
Best Regards,
SG
Maybe you are looking for
-
Am I doing this wrong? Pixs
Hello to the mac family, I'm back with another question. I bought my wife an I-pod Nano along with my new I-mac. I am not sure what generation it is but is about 3 weeks old. I am very new to X (9,2 user) so please be kind. I put some sings in I-tune
-
Filter Question 1: Shift Field - when to shift it?
And by "shift it", I'm really asking in what order to place it, relative to any other filters being applied. And is there a rule of thumb for this particular filter being first or last in the stack? The Specific Issue: I notice FCP applies the filter
-
How to re-install adobe acrobat XI pro onto another computer
how to re-install adobe acrobat XI pro onto another computer
-
Is there a way to have multiple levels of a drop-down menu in Dreamweaver MX or can I use an extension that does this? I have a Horizontal Navigation Bar, which has a drop-down menu. But I need to add more levels to the drop down. For example, if I h
-
Authorization Analysis : variable on 0TCAVALID
Hello, I need a variable of type customer exit on the special infoobject 0TCAVALID (Validity of an Authorization) in the definition of an authorisation in transaction RSECADMIN. Does it mean that I must add this infoobject in my infocube in order to