Dynamic Table in adobe inter-active forms

Hi Gurus,
I have dragged and dropped Dynamic table in body page and Header data placed in Master page. Now my problem is the data is not going to the next pages. Kindly pls tell me the way so that my data will appear in next pages.
Regards,
Srini

Hi,
What do you mean by Header data in master page...? is it header Row...with labels, why do you need it in master page have it along with your table in body page.
What do you mean my data is not displayed on the body page ...?
What I could understand is as below. you have a dynamic table where the number of rows may be n such that it can spread across multiple pages, if it spreads in multiple pages you need the header row in all the page occurances. is it so ...?
if so just do it as below.
Have the table in your body page with one header row and one body row.
Set table allowed page break with in content
Put this table in a subform and say it flowed top to bottom and set allow page break with in content.
Select header row>object>pagination set include row in initial page and subsequent pages to checked.
Select body row-->object->binding set repeat row for each data item to checked.
This should work, else let me know your requirement more briefly..
if You need a sample file for this send me a test mail to my id from the business card address.
Cheers,
Sai

Similar Messages

Merging of cells of a dynamic table in adobe form

Hi,
I am trying to Merge 2 columns in a dynamic table in adobe form.The requirement is to merge column 3 and column 4 if column 4 is empty. I used the below javascript code in both "Form ready " and Initialize event of the row.
if (this.Cell4.rawValue == " ")
this.Cell3.colSpan = "2";
this.Cell4.presence = "hidden";
Note : Since above code was not working , i used the below code in my subform also but it did not returned desired output.
if(Table22.Row1.Cell1.rawValue == " ")
Table22.Row1.Cell3.colSpan = "2";
Table22.Row1.Cell4.presence = "hidden";
The problem is that in my dynamic table , its the second row where the requirement is fulfilled ie in the 2nd entry of my table the column4 is blank (the exact row number might change depending on input data).
is there a way to loop in the dynamic table and check if column 4 is empty for a particular row.
the above code does not help to fulfill my requirements. kindly help.
Thanks
Aditi

Hello Aditi priya,
Hope you are doing good..
Please go through my recent blog..
http://scn.sap.com/community/interactive-forms-by-adobe/blog/2015/01/02/merging-internal-table-cells-dynamically-in-sap-adobe-forms-using-java-script-code
I hope you will find all answers from this blog..Reward if helpful...
Thanks & Regards,
B Raghu Prasad

How to populate dynamic table in Adobe Livecycle form with cfpdfform?

Hello all,
after two days search on the above topic without results I hope someone here can help me.
The problem:
I have an Adobe PDF form created with Adobe Livecycle Designer that has a dynamic table inside it. The table Table1 consists of a Header Row with 4 cells of text and a data row Row1 with four cells each one having a Textfield Cell1, Cell2,Cell3 and Cell4.
Table1 sits inside a subform mytable. The subform is made to flow and the Row1 has the Binding Repeat Row for Each Data Item checked.
Everything is enclosed within the standard subform form1.
Whe I use the following code, I supposed that the table should have two rows..because it is said it will be dynamic:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<cfpdfform action="populate" source="test.pdf" destination="testout.pdf" overwrite="yes" >
<cfpdfsubform name="form1">
<cfpdfsubform name="mytable">
    <cfpdfsubform name="Table1">
      <cfpdfsubform name="Row1">
        <cfpdfformparam name="Cell1" value="1">
        <cfpdfformparam name="Cell2" value="2">
        <cfpdfformparam name="Cell3" value="3">
        <cfpdfformparam name="Cell4" value="4">
      </cfpdfsubform>
      <cfpdfsubform name="Row2">
        <cfpdfformparam name="Cell1" value="5">
        <cfpdfformparam name="Cell2" value="6">
        <cfpdfformparam name="Cell3" value="7">
        <cfpdfformparam name="Cell4" value="8">
      </cfpdfsubform>
    </cfpdfsubform>
</cfpdfsubform>
</cfpdfsubform>
</cfpdfform>
<cfpdfform action="read" source="testout.pdf" result="testout" />
<cfdump var="#testout#">
</body>
</html>
What happes is:
The testout.pdf displays just one row,with the values 1,2,3,4 the second row is only visible when I export the data as xml but not within the PDF.
Please can someone enlighten me?
Thanks and regards
Gilbert

When populating your pdf fields, you can loop through all the records in a query like so...
   <cfloop from="1" to="#query1.recordCount#" index="i">
            <cfpdfformparam name="txtField1_#i#" value="#query1.Field1[i]#">
            <cfpdfformparam name="txtField2_#i#" value="#query1.Field2[i]#">
</cfloop>
This will handle two rows or thirty rows just the same. In this case my fields in the pdf have the row # as a suffix.

How to do a Dynamic seletion in Adobe interative forms --urgent

Hi ,
I am totally new to Adobe forms Can you anyone help me in what all i should do to fetch data dynamically based on an entry in text field on the adobe form. For eg : I have a employee number the user enters this and on enter other details on the form should be fetched dynamically . Please let me know for both Webdynpro ABAP and JAVA . I am still not decide what to use .
Regards
Abhilash

Hello Abhilash,
You will have to write javascript or formcalc in order to do this.
Regards
Abdul

Adobe interactive active form not rendering

Hi All,
I am trying to create a Adobe Interactive form application.
I have created the form and have integrated into a ABAP WebDynpro as well . How ever when i try to test the application it crashes without rendering with the following message.
Error when processing your request
What has happened?
The URL http://bp1xeuaa168.bp1.ad.bp.com:8000/sap/bc/webdynpro/sap/zwd_gpd_access_request/ was not called due to an error.
Note
The following error text was processed in the system WFH : WebDynpro Exception: ADS: Request start time: Fri Jun 13 18:43:08 BST 2008(200,101).
The error occurred on the application server bp1xeuaa168_WFH_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system WFH in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server bp1xeuaa168_WFH_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server bp1xeuaa168_WFH_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
I have tested the connection from sap to RFC Destination ADS. It seems to be working fine. I have also executed the program FP_PDF_TEST_00 to check the connectivity.
It provides me with the following information : Version Information: 710.20061024154505.342190
Can someone please have a look into the issue and suggest wht is that i am not doing or is going wrong.
Cheers,
Avi

Dear Ralf,
Thanks for your prompt replies. I appreciate it.
I've copied the following code mentioned in the note and pasted it in my wddomodifyview method.
But after activating and executing the application, the application time outs and gives ADS time out error.
I've checked and am sure that it is the below code that makes it time out.
I would also like to draw your attention to the fact that when i then run prog. FP_TEST_00, it also hangs.
Please help.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Mar 22 09:52:18 2011
Module: icxxthr_mt.c
Line: 2707
Server: AIERD_AED_00
Error Tag: {-}
Detail: Connection to partner timed out after 180s
Code is:
data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
      LR_METHOD_HANDLER    type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
      check first_time = abap_true.
      LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'IFORM').
      LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
      LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
Edited by: User on Mar 22, 2011 5:44 AM

Dynamic Table data cannot be Read.

Hello,
       I have an Adobe Interactive form and I am trying to read the data from the Dynamic Table I have in the Form. The Problem is when I try to read the data using the below code, the data which is entered by user data cannot be read for some reason.
navigate from <CONTEXT> to <ADR_DATA> via lead selection
lo_nd_adr_data = wd_context->get_child_node( name = wd_this->wdctx_adr_data ).
navigate from <ADR_DATA> to <PREV_EMPLOYMENT> via lead selection
lo_nd_prev_employment = lo_nd_adr_data->get_child_node( name = wd_this->wdctx_prev_employment ).
get element via lead selection
lo_el_prev_employment = lo_nd_prev_employment->get_element( ).
get all declared attributes
"lo_el_prev_employment->get_static_attributes_table(
lo_nd_prev_employment->get_static_attributes_table(
   IMPORTING
     table = form_data-prev_employment ).
I have:-
1. Checked the Binding on Adobe Form
2. Checked the Context for the same.
3. Checked the Cardinality of the Nodes.
Please let me know in case i am missing something.
Regards,
Shishir.P

Hello,
     I have tried other method as well but was unsucessful, the procedure is below:-
1. Get PDF content of online form by reading the context.
2. Convert this data to XML
      l_fp = cl_fp=>get_reference( ).
      l_pdf = l_fp->create_pdf_object( ).
      l_pdf->set_document( pdfdata = pdf_data ).
      l_pdf->set_task_extractdata( ).
      l_pdf->execute( ).
      l_pdf->get_data( IMPORTING formdata = l_xstring ).
      CLASS cl_ixml DEFINITION LOAD.
      DATA: g_ixml TYPE REF TO if_ixml,
            streamfactory TYPE REF TO if_ixml_stream_factory,
            istream        TYPE REF TO if_ixml_istream,
            document TYPE REF TO if_ixml_document,
            parser TYPE REF TO if_ixml_parser.
      g_ixml = cl_ixml=>create( ).
      streamfactory = g_ixml->create_stream_factory( ).
wrap the table containing the file into a stream
      istream = streamfactory->create_istream_xstring( l_xstring ).
      document = g_ixml->create_document( ).
      parser = g_ixml->create_parser( stream_factory = streamfactory
                                      istream        = istream
                                      document       = document ).
      parser->parse( ).
3. Read the data from the XML. (I was able to extract other data on the form but not the one in the table. The data entered in the table row in the interactive form is not getting converted into XML or not being extracted in PDF at all).
      form_data = get_adr_from_xml( document ).
The Code Wizard is an old one and does not support table operations as the new code wizard. Please let me know in case you have any other method of resolving this issue.
Please let me know your work around, I am in desparate need for a solution.
Regards,
Shishir.P
Edited by: Shishir Paltanwale on Apr 21, 2010 8:16 PM

How to pass the data of the dynamic table into internal table

Hi all,
I had designed an Dynamic table in my Online Interactive form.
I am able to pass only the First row data into the internal table which i had created
Now how can i pass data of all the rows into the internal table.
Needed some coding help
Thanks
Ajay

Hello Ajay,
If you have dynamic table in adobe and you want to capture all the added rows then you need to add corresponding element in the node bound to that table ui.
when u add a row using java script in adobe form there is no corresponding element created in the backend that is ur wd node bound to the table ui. and so u only get 1 row of data back.
try this,
create a button in your view holding adobe form say "add rows" and on click of this button write the code to add one more element to the node bound to ur table ui of adobe form. when server side rendering occurs it will recreate the table in adobe with added row in the node and you will be able to get the data entered by user.
Thanks,
Abhishek

How to export dynamic table to changing parameter of a method

Hi ,
There is one method in which i have created a dynamic table and populated the data now i want to send the same dynamic table which is in the form of field symbol to the changing parameters of the method
with data

Hi,
Check these blogs,
SAP Developer Network Blog: Dynamic Internal Tables and Structures - ABAP
SAP Developer Network Blog: Dynamic Internal Table
Regards,
Alok Bansal
Edited by: alok bansal on Dec 6, 2008 10:35 AM

Looping through table in ADOBE TABLE...HOW?

Hi,
I'm having a problem with writing scripts on looping through a dynamic table in adobe and disabling certain cell in the table.
can some one write me the script to help me out...please.... here is my email add. [email protected]
Regards,
Vinod

Hi Denise
You can use tableView for this which is available in htmlb.
There is a attribute in tableView called visibleRowCount.
The integer value that u give for this attribute , only that number of rows will be visible on your BSP page.
This is the sample code :
      <htmlb:tableView id              = "tb1"
                       headerText      = "Communication"
                       headerVisible   = "true"
                       design          = "alternating"
                       visibleRowCount = "4"
                       fillUpEmptyRows = "true"
                       table           = "<%= itab %>" >
                <htmlb:tableViewColumn
                 columnName     = "CURRENT_STATE"
                 title          = "CURRENT STATE"
                 edit           = "TRUE" />
.                     </htmlb:tableView>
Here tableview id and table is mandotory field.
Give as many tableViewColumn as u have column in your internal table ( Here CURRENT_STATE is the name of the Column that I have in my internal table).
Here visibleRowCount is 5, so only 5 rows will be visible at a time .For other entries u have to click on
my click handler which is like a footer in a tableView, and next 5 entries will become visible and like that.
Before implementing this, fill your internal table
in OnCreate in Flow logic ( in do_init in case of MVC).

Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

Hi All,
I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
I have button in the adobe form.
Button Name = u201CSAVEu201D
Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form.
Here I am facing a problem.
I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
Example:
The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
1)     I have selected second value in the Drop down (ROW1)
2)     I have selected fourth value in the Drop down (ROW2)
3)     I have selected fifth value in the Drop down (ROW3)
4)     I have selected seventh value in the Drop down (ROW4)
5)     I have selected third value in the Drop down (ROW5)
I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
How to resolve this problem.
Regards,
Boopathi M

Hi,
Solve the problem .
I have created the New node for dropdown. also i have one node already for table.
The new node i bind to dropdown, the table same for table.
Its working fine
Boopathi M

How to handle Adobe Form - Dynamic Tables.

Experts:
I am new to Web DynPro for ABAP and Adobe Interactive forms.
I have created a Adobe form with dynamic table. When I submit the form, WD4A is able to read only the first row of the table. Other rows are getting lost.
I thought just binding with the context will trasfer data from Adobe to WD4A. But it is not happending.
Do I need to write any code in WD4A and any script in Adobe Designer?
Can any one send me a sample code (ABAP and JavaScript). Even link to that will be very useful.
Thanks,
Vijai

Thomas:
My context is as follows.
<CHANGING>
<REQUISITION_ITEMS>
    <ELEMENT..1>
    <ELEMENT..2>
    <ELEMENT..3>
The cardinality of <CHANGING> node is 1..1 and the cardinality of <Requisition_items> is 1..n.
Thanks
Vijai

Dynamic table in webdynpro interactive form not working. Urgent

Hi guys,
I am facing a problem when trying to retreive data entered in interactive form dynamic table.i can get the data entered in non dynamic fields no problem.
I have a node structure like this
Root
Data 1...1 singleton and non tried both
Table 1...n singleton and non tried both
In my adobe form i tried adding rows using add instance, and also using add button in webdynpro native. In the same method that adds row i simulated the submit button to create row in WD context! It adds rows but any data entered later is lost. One more thing i have noticed is it sometimes works after adding just one row! Data is passed to context but from next row it doesnt work! What am i missing?
I also tried adding a button in webdynpro tray and adding the row directly to the context. new row is created in form but any data entered in new rows is lost!
I am unable to obtain the data entered in Dynamic fields. I thought i would try the xml reading method but the problem is after crating a couple of rows dynamically if i go save pdf locally the new rows are not showing up in the pdf!
I have seen a post which said using the if_wd_iactive handler to set the form as dynamic but that method is not available in our system! Sorry i am not in front of an SAP system so i cant type exact names!
I tried using zci update program/ etc etc but i am still struggling at the moment. Any help would be much appreciated! Pls ask if you need more info.
Regards
Naresh
Edited by: naresh dwadasi on Oct 7, 2011 9:05 PM

problem solved! I had to recreate the form. not sure if i corrupted the webdynpro scripts etc by mistake.

Itextsharp using livecycle form with dynamic table

Hello all, after searching Google for the past two days and not able to find any relevant information, hence this post.
Some background:
1) Created a pdf form using Adobe Livecycle designer 9.
2) It is a dynamic form with textboxes and a table configured to repeat rows dynamically.
3) Testing form using xml data within designer works just fine.
Requirement:
Need to populate form dynamically using data from database.
Solution:
Found iTextSharp (free assembly) which assists with populating existing pdf form.
Issue
This assembly works without any issue when populating textfields (see sample code below). The problem I am facing is with the dynamic table where in I am not able to reference rows greater than 1. Since the pdf template contains a table with just one row referencing the first row using acrofield works.
I was under impression since this is a dynamic table with repeat enabled, in asp.net if I referenced row2 onwards the table would grow automatically. Which I have come to realize is not going to be possible.
So I am looking for ideas on how I can accomplish this. I wish this could have been a fixed row table then reference rows would have been easier. However in this situation the table has to be dynamic.
Any ideas thoughts would be appreciated.
Below is my sample code:
PdfStamper ps = null;
try {
// read existing PDF document
PdfReader r = new PdfReader(
// optimize memory usage
new RandomAccessFileOrArray(Request.MapPath("itext.pdf")), null
ps = new PdfStamper(r, Response.OutputStream);
// retrieve properties of PDF form w/AcroFields object
AcroFields af = ps.AcroFields;
// fill in PDF fields by parameter:
// 1. field name
// 2. text to insert
af.SetField("txtCompany", "Company name");
af.SetField("txtDateDepartLocation", "date depart location");
af.SetField("txtDate","test date");
af.SetField("txtServiceNumber", "Service number");
af.SetField("Table2.Row1.Cell1", "1test");  this works
//doesnt work!!!
af.SetField("Table2.Row2.Cell1", "1test");
af.SetField("Table2.Row3.Cell1", "1test");
// make resultant PDF read-only for end-user
ps.FormFlattening = true;
// forget to close() PdfStamper, you end up with
// a corrupted file!
ps.Close();
catch { }
finally { if (ps != null) ps.Close(); }

Hi FourEyes;
Try using this.
Select Col1, Col2, Col3
into :P1_Field1, :P1_Field2, :P1_Field3
from Your_Table
Where (your conditions);

Reading Dynamic Table Values in interactive form (web Dynpro ABAP)

Hi All,
I have created a Web Dynpro ABAP application which contains an Interactive Form, That Adobe Interactive Form contains Dynamic table (New rows can be added manually and deleted using a button).
I am not able to read the Dynamic table values in Web Dynpro u201COn Submitu201D.
In the Adobe form I have web Dynpro native button (I am using ZCI), while clicking the native button I need to read the dynamic table values.
How can I resolve this problem.
Thanks and Regards,
Boopathi M

that means, when u add the table instance at runtime, you will also have to add an element to the node that is bound to the table.
probably addNew() mathos may be useful to you.
it appends a new record to the record set.
xfa.sourceSet.dataConnectionName.addNew()
also when on the exit event of the table field, do the following:
var i = xfa.parent.index
$record.rootnodename.tablenodename.data<i>.fieldname = $.rawValue
xfa.host.messageBox($record.rootnodename.tablenodename.data<i>.fieldname)

DYNAMIC TABLE IN WEBDYNPRO INTERACTIVE FORM

Hi,
I am using dynamic table in interactive form(webdynpro java). In that form i bind node for to populate the details for the table. The details should be come from RFC.
The RFC contains more than one record. While i tried to populate all the records to the dynamic table i cant able to got all the datas. I got only one record to the table.
    Interactive Form table node structure is:
            Node                                          Cardinality                             Singleton
vnPDFDataSource                                    1..1                                         true
        chnTableList                                     1..1                                         true
                       chnTableRow                     0..n                                         true
                               chnRowData              1..n                                        false
                                         attr-1
                                           attr-2
                                            attr-n
o   The nodes bound to table and row in Adobe form are:
chnTableList u2013 bound to Table
chnTableRow u2013 bound to Row
If anybody know means let me tell how to solve the problem.
Thanks,
Senthil prabhu

Hi,
To add a row in dynamic table in interactive form How to create dynamic table in the interactive form
also check page 11-13 in this docuemnt https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f09fc2-0401-0010-1482-dbf9891e7613
after adding it you can send the table data to rfc asusal Problems while setting Multiple Rows of data as Table Parameter to the RFC
give a lot at this too want to save data
regards,
Pradeep

Dynamic Table in adobe inter-active forms

Similar Messages

Maybe you are looking for