Dynamic variable assignment under general precalc tab of broadcasting

Is there a way to dynamically assign variable values to the "general precalculation" tab under broadcasting? I am broadcasting a report and I want to change the variable values every month dynamically. I want to write an ABAP program that can fill the variant valus under that general precalculation tab. Is this possible?

There is a table RSRD_SETT_NODE_a that contains all the broadcast settings. It has the variable values. We wrote an ABAP program to update this value. We can save a variant of this program and run the variant before we run the broadcast. The broadcast setting, variable name we want to update, and the class to pass values to this variable are input parameters to the program. Let me know if you want more details.

Similar Messages

Variable Assignment in General Precalculation tab of BI 7.0 broadcaster

Hi,
In the broadcast setting, under General precalculation tab variable values can be set up. When we are clicking create variable values, screen with all the variables of the query were coming.
After entering data in the variables and clicking OK, values are not being transferred to the Broadcast setting. The variable page remains like that with out transferring to the Pre Calculation tab.
We are on SAPKW70020.Distribution type used is Broadcast email, output fornat is MHTML. I tried with other output types, but same result.
We are using query as the object type for creating Bex Broadcaster.
Has anyone ran into this issue before?
Thanks & Regards,
Pradeep

Hi Mohan,
You have opened up an old post, so many responses might be to answer the initial question.
However, to answer your question, when you click 'Create' next to the 'VAR01 in Variable assignment, what you see is a popup window with the 'Ready for Input' variable present in your query/ workbook/ template, which is the same variable screen which you get when you execute the same query/ workbook/ template independently. You can then enter values for those variables and click OK, to save it and to be passed to the broadcasting setting. The broadcast would then happen for the same variable values.
However, if you face the issue mentioned by Pradeep, then after clicking OK, you can cancel the popup window. The values of the variables would still be passed.
After the popup window closes, you can see the 'Create', you initially saw, replaced with 'Change'. This means the values are saved.
Hope it helps.
Thanks,
Abhishek.

What Date in CNS0 we need to enter in Planned Gds mvm tab under general dat

Hi PS Guruu2019s,
Date should be after the (MRP2 tab in Material master Planned Delivery (Calendar day) + GR Processing Time (Working days))
Example:-
For materials A from Materials master days are two.
Thant means 16u2019Th March (consd'g 14'th march) we can enter data in CNS0 as in Planned Gds mvm tab under general data tab
Please correct me if I am wrong.
Many Thanks
MM

>
MenakaM wrote:
> in CNS0 as in Planned Gds mvm tab under general data tab
> Many Thanks
> MM
The date of goods movement or delivery date of your items to the project site or to the client.

Issue with the variable assignment in th Bex broadcaster

hi ,
i am working on Bex broadcaster . while creating a setting for a report, in the variable assignment under the General precalculation tab, the value given is not getting transferred.
i tried it in development portal its working fine.
do anyone have any ideas abt this.

Hi Apurva,
Find any solution for your problem? We are experiencing a similar issue too.
Thanks,
Vivek

General Doc Tab to Proj Doc tab

Hello!
We created an implementation project from our template project.
In the implementation project all the documents are in 'display' only mode under 'general documentation' tab. Is there any way we can bring all the documents from ' gen doc tab' to ' proj doc tab'. Something like a mass movement of the docs- Is is possible?
Appreciate inputs.
Mike

Hi Andreas,
That's a good piece of knowledge indeed -
Didn't realise the power of 'Global' attribute in effecting such 'mass copy' of documents from 'General Documentation tab' to 'Project Documentation' tab in one shot.
I have been reading your posts in various other threads - they portray a degree of usage of SolMan beyond the usual remit. Lots to learn from you.
Cheers,
Srini

3GS Only plays Ringtone Assigned in General Settings

Wife and I both have the new 3GS. Hers works perfectly, playing whatever ringtone is assigned to a contact. Mine only plays the ringtone assigned under 'General Settings', no matter what tone is assigned to a contact. I've tried 'Reset All Settings' and the reboot (holding power key and main button together) as suggested in the forums. Any other ideas? I have not downloaded any custom ringtones. We're just using the one's provided in the phone. Thanks.

I'd go thru every setup screen of the phones and compare them.
If no differences, do a Restore of the one giving you trouble.
Phil

General Precalculation Tab - Variable Assignment

Hi Experts!!!
We have a new problem, we are setting Precalculation Web Application, the Data Provider query have a Variable, when we are setting this in the General Precalculation Tab a error ocurr "String of variables VAR_01 not filled" Number warning RSRD 267.
Maybe us don't know how to do this, you can help me.
Regards
Egly

I meant you must have data in your respective warehouse system on which you are trying to precalculate then only OLAP processor will fetch data for precalculation.
Please check it out

Broadcasting - General Precalculation Variable Assignment

Hi All,
Just have a query regarding Broadcast settings for a bex Query with variables.
After creating the broadcast settings under the "General Precalculation"
Variable Assignment
> Determine from Variants options
Can anyone tell me where do we have to create these variants so as to select them from the Broadcast settings window and map it to the query varaibles??
Thanks
Rao

Hi Rao,
You just need to execute ur query ( either in Bex Analyser or Web analyser ). In the selection screen you can enter the values for ur variable & save as a variant ( ex: VARIANT1 ).
In broadcasting now click now variant tab there u can see the VARIANT1 which was created during query execution.
Hope this helps.
Regards,
Sheetal

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.

I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.
I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
Thanks,

martyskidmore wrote:
I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
1) From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
2) If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141

How to add new value in Classification under General tab via MM02.

Hello Experts,
I've a requirement where I need to add a new material variant configuration value via MM02 as highlighted below. I've also attached the screen shot of CL02, the two characteristics which I need to add (highlighted in red).
Can please anybody tell me the steps to add value in Classification under General tab via MM02.
Many thanks in advance.

zero cool,
Use transaction CL02 , open class in PCL_222_PURO_BOX with class type 300
add characterstic
PCH_COSTING_WGT_DETERM
PCH_COSTING_WGT_A_DETERM
save it.
Now use MM02 and go to classification view , now you would be able to see these characterstic there.
Check and come back.
Thanks
Ritesh

Web template not showing "force variable property" under generic tab

Hi All,
I have a problem regarding web template property.One web template is not showing "force variable" property under generic tab in DEVELOPMENT sys but the same web template showing "force variable" property in QUALITY sys.I want property in DEV sys also.
Plz help me.
Thanks In Advance.
Priyesh.

Hi Priyesh,
Are you sure youhave the web template properties open and not those of any web item in this template? If you can;t find the option you can try coding it in HTML (look at the code in the Q system and copy - paste it into your template in Dev)
Hope this helps...

Broadcasting - dynamic variables

Hi,
I have question on broadcasting while using mandatory variables which need to be dynamically filled. Here is my scenario:
I am on BI 7.0 and using email bursting.
Query is having 4 variables : CalDay, Fisc Period, Company code, currency.
Calday and Fiscper are pre-populated using customer exit. (-step =1). They are current day and current Fiscal Period.
Currency and company needs to be passed to broadcasting job.
Now as per my understanding, these needs to be passed thru 'general pre-calculation' tab either thru variable assignment or variant. But issue is in either of this, values for current day and current fisc period gets saved and will not be refreshed when broadcasting runs next time, which we dont want.
To over come this issue, we need to write abap program to dynamically change these values. Now per my observation, this setting gets stored in table RSRD_SETT_NODE_A.
Finally here are my questions,
1) In table RSRD_SETT_NODE_A, i just see variant name but the actual fields and values used for this variant are not stored here. Could you please guide me where the actual values are stored so that if I have to write ABAP program, i can change those values. (I dont see this variant in RSRVARIANT table also.)
2) Other options to leverage without using above ABAP method.
Thanks in advance for all your help and time
S

HI,
The variants of the variables will be stored in the table TVARV. May be you can write a custom ABAP program to modify this variant values in this table and see if the broadcast happens accordingly.
Guess this will help to solve your issue.
You can have a look at this for more info
/thread/69150 [original link is broken]
Regards.
Shafi.
Edited by: shafi abdul on Jun 23, 2010 6:28 PM

Broadcasting and Variable Assignment

Dear Experts,
I want to assign variable in broadcasting dynamically. For example, this variable will be changed every month. I tried to set the variant on BEx Analyzer, and looked into the table TVARV, but I couldn't find my variant in that table. Is there any way to assign variable dynamically?

Hi CSM Reddy,
1. while creating your Broadcasting Settings ... you can use your Variable for OLAP Cache.
    Question1. How and where can I use variable for OLAP Cache in broadcasting. What I just see is variable assignment in the General Precalculation tab
    Question2. Variable for OLAP Cache you said is the same as the variable created in Query Designer, right?
2. then you make sure the variable in Bex is setup with "Ready for input" unchecked
    Question1. I have to allow users to input month to see the report in the month they want, so I think I can't default the value for this variable.
    Question2. What do you mean 't Type variable'?

Dynamic Variable Declare

Hi experts,
How can i declare Dynamic variable under loop,
I have Data from CABN Table with Char Name /Data type/Length.
Is there any function module or method where i provide the parameters for declaration.
thanks.

DATA r_elemdescr TYPE REF TO cl_abap_elemdescr.
r_elemdescr ?= cl_abap_elemdescr=>describe_by_name( 'DATA_ELEMENT_HERE' ).
DATA r_field TYPE REF TO data.
FIELD-SYMBOLS <field> TYPE ANY.
CREATE DATA r_field TYPE HANDLE r_elemdescr.
ASSIGN r_field->* TO <field>.
<field> = .....
"now <field> is your dynamic field value
Regards
Marcin

Dynamic variable assignment under general precalc tab of broadcasting

Similar Messages

Maybe you are looking for